132 offers alba

Category: 105: saws
approved
dealer
New in: 1991
Price: request quote
Location: Land-at AT 5580 Tamsweg ( Salzburg ) / Austria // Europe, Nr. 31
Seller: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

KASTO Bandsaw-Halbautom. Type. HBA 400/800/Bj 91/Cut range: Around 90 ° 420 mm/flat 90 ° 820 x 380 mm/four-edged 90 ° 400 x 400 mm/about 45 ° 420 mm/flat 45 ° 550 x 380 mm â 15 °: 380x800/four-edged 45 ° 400 x 400 mm/vibration cut speed 20-130 m/min./Material voltage hydraulically 150-500 daN/ Saegeband measurement 7742 x 50 x 1.3 mm/setting + 45 °/-60 °/Material circulation 810 mm/drive power 5.5 kW/Total power 10 kW/with roller coaster/digital/good condition fe.gi.maschinen.sbg.at KASTO band saw-semi-automatic. Type. HBA 400-800/Bj 91/cutting range: Around 90 ° 420 mm/flat 90 ° 820 x 380 mm/square 90 ° 400 x 400 mm/round 45 ° 420 mm/flat 45 ° 550 x 380 mm-15 °: 380 ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

type Record, 30 pcs., size 1, 20 - 70 g\r\ninclude 3 new plastic moulding plates\r\n\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new\r\n

Category: 502: presses
approved
dealer
New in: 1984
Price: request quote
Location: Land-pl PL 43300 Bielsko-Biala, ul. Gen. St. Maczka 9
Seller: ARTechnic

Max. pressure: 35 tons Year of production: 1984 Supply: 400 V/ 21 kW Number of strappings: 4 in horizontal Bale tying: automatic, wire Cross-section of the channel: 700 x 1000 mm Unit pressure: 50 tons/m² Bale weight: to 450 kg Filling inlet: 650 x 1000 mm Weight: ca 8 tons The machine is fully operational and after service. Englisch - Ewelina Pekala +48 696 072 985 Deutsch - Ewelina Pekala +48 696 072 985 Polnisch – Ryszard £uba +48 501 330 786 Russisch – Alina Hykava +48 795 135 939

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

Type Piccolo 2, 30 pcs., size 2, 25 - 70 g\r\ninclude 3 new plastic moulding plates\r\n\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new\r\n

Category: 401: filling machines
approved
dealer
New in: 2019
Price: request quote
Location: Land-at AT 4924 Waldzell
Seller: Wilhelm Freudlinger Werkzeuge und Maschinen

Bagging line with weighing system Filling stations: 6 / 8 /. 10 / 12 Total capacity approx.: depending on settings at least 5-30 kg per sack Curb weight approx.: 185/ 195 / 205/ 225 kg Engine power: 0.18 kW - 400 V / 50 Hz Size: 1.100 x 1600 / 1,350 x 1,800 mm 1.600 x 2,050 / 1,850 x 2,250 mm Stations-filling, station to station Bag holder with innovative lifting mechanism adjustable in height Potential-free contact for autom. Start / stop the machine of before Electrical control box through 360 ° Options: Label printer

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

semi automatic, working width 400 mm, thickness 10 mm,\r\nlubrication system for the knives\r\n\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new\r\n

Category: 401: filling machines
approved
dealer
New in: 2019
Price: request quote
Location: Land-at AT 4924 Waldzell
Seller: Wilhelm Freudlinger Werkzeuge und Maschinen

Bagging line special Filling stations: 8 /. 10 / 12 Total capacity approx.: 240/ 300 / 360 kg Curb weight approx.: 195/ 205 / 225 kg Engine power: 0.18 kW - 400 V / 50 Hz Dimensions: 1,350 x 1,800 / 1,600 x 2,050 / 1,850 x 2,250 mm Stations-filling, station to station Bag holder with innovative lifting mechanism adjustable in height Sensor overfill protection Potential-free contact for autom. Start / stop the machine of before Electrical control box through 360 °

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

30 pcs., size 3/ 32 - 70 g\r\ninclude 3 rouding plates \r\n\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new

Category: 401: filling machines
approved
dealer
New in: 2019
Price: request quote
Location: Land-at AT 4924 Waldzell
Seller: Wilhelm Freudlinger Werkzeuge und Maschinen

Bagging line standard III Filling stations: 6 / 8 /. 10 / 12 Total capacity approx.: 180/ 240 / 300/ 360 kg Curb weight approx.: 185/ 195 / 205/ 225 kg Engine power: 0.18 kW - 400 V / 50 Hz Size: 1.100 x 1600 / 1,350 x 1,800 mm 1.600 x 2,050 / 1,850 x 2,250 mm Stations-filling, station to station Automatic or manual operation Sensor overfill protection Bag holder, height-adjustable Electrical control box through 360 ° Potential-free contact for autom. Start / stop the machine of before

Category: 903: machines for soil cultivation, sowing and harvesting
New in: used
Price: request quote
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

Category: 401: filling machines
approved
dealer
New in: 2019
Price: request quote
Location: Land-at AT 4924 Waldzell
Seller: Wilhelm Freudlinger Werkzeuge und Maschinen

Bagging line standard II Filling stations: 6 / 8 /. 10 / 12 Total capacity approx.: 180/ 240 / 300/ 360 kg Curb weight approx.: 185/ 195 / 205/ 225 kg Engine power: 0.18 kW - 400 V / 50 Hz Size: 1.100 x 1600 / 1,350 x 1,800 mm 1.600 x 2,050 / 1,850 x 2,250 mm Continuous operation Automatic or manual operation Sensor overfill protection Bag holder, height-adjustable Electrical control box through 360 ° Potential-free contact for autom. Start / stop the machine of before

Category: 105: saws
approved
dealer
New in: new
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

cutting diameter: 280 mm capacity 90 degrees: flat: 380 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 300 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 200 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3440 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW dimensions of the machine ca.: 1647 x 2157 mm weight: 720 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 401: filling machines
approved
dealer
New in: 2019
Price: request quote
Location: Land-at AT 4924 Waldzell
Seller: Wilhelm Freudlinger Werkzeuge und Maschinen

Bagging line standard I Filling stations: 6 / 8 /. 10 / 12 Total capacity approx.: 180/ 240 / 300/ 360 kg Curb weight approx.: 170/ 180 / 190/ 210 kg Engine power: 0.18 kW - 400 V / 50 Hz Dimension Ã?: 1,100 / 1,350 / 1,600 / 1,850 mm Continuous operation No level monitoring Bag holder, height-adjustable

Category: 201: saws
approved
dealer
New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Horizonale Plattenaufteilsäge\r\nFabrikat: Casadei\r\nTyp: AXO\r\nNeumaschinen - Serie\r\n\r\nSchnittlängen 3.200 / 3.800 / 4.500 mm\r\nSägeblattüberstand je nach Baureihe 70 / 90 / 110 oder sogar 130 mm\r\nHauptsägemotore bis zu 15 kW\r\n\r\nNC gesteuerte Positionierung des Programmschiebers, absolut maßgenau durch unabhängiges berührungsloses Magnetband-Messsystem\r\nSägewagen auf LINEAR THK Führungen geführt\r\nEinfacher Sägeblattwechsel durch pneum. Schnellverschlüsse\r\nDruck der Spannzangen und des Sägedruckbalkens pneum. Regelbar\r\nAutomatische Einstellung des Sägeblattüberstandes zur Pakethöhe\r\n\r\nWeitere Optionen:\r\nAutomatisches Nutprogramm\r\nEtikettendrucker ...

Category: 105: saws
approved
dealer
New in: 1991
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -Roll diameter 420 mm -Throat depth 410 mm -maximum passage height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height from the floor about 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 18-562 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1300 mm -with:-brake device for braking the lower roller -Blade welding machine in the machine base -Grindstone and lamp -Scissors, air pump and lighting

Category: 201: saws
approved
dealer
New in: used
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

cutting diameter: 250 mm saw band length: 2.950 x 27 x 0,9 mm vice: 290 mm band speed: 36 / 72 m/min capacity 45 degrees: flat: 120 x 160 mm capacity 45 degrees: round: 150 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: flat: 120 x 130 mm capacity 90 degrees: square: 230 x 230 mm capacity 90 degrees: flat: 280 x 200 mm total power requirement: 1,5 / 1,8 kW weight: 610 kg range L-W-H: 1,8 x 2,1 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 502: presses
approved
dealer
New in: 1999
Price: request quote
Location: Land-de DE 92655 Grafenwöhr, Pechhofer Weg 16
Seller: Recotech Recyclingmaschinen GmbH & Co.KG

Paal konti 325 D-K-so. Hours of operation approx. 37.000 h Force main press 94 t Kanalqerschnitt: 750 x 1100 mm Filler: 1020 x 2000 mm Power: 2 x 45 kW about throughput performance under operating conditions: 400 m³/h Freistosser: Yes Kanallverstellung: Yes Total weight approx. 31 t Machine without belt Visit possible

Category: 201: saws
approved
dealer
New in: used
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

cutting diameter: 250 mm saw band length: 2.950 x 27 x 0,9 mm table height: 800 mm vice: 290 mm band speed: 36 / 72 m/min capacity 45 degrees: flat: 120 x 160 mm capacity 45 degrees: round: 150 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: flat: 120 x 130 mm capacity 90 degrees: square: 230 x 230 mm capacity 90 degrees: flat: 280 x 200 mm total power requirement: 1,5 / 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 105: saws
approved
dealer
New in: 1990
Price: request quote
Location: Land-de DE 91126 Schwabach, Bremer Straße 8
Seller: Schrenk Werkzeugmaschinen

hydraulic feed table with 260 mm lift / travel Throat depth 400 mm Cuttting height degr of Max 360 mm Table size 660 x 660 mm Infrastructure of the table 260 mm Level 1:15-155 m / min Level 2: 150-1600 m / min Band saw blade approximately 3450-3640 mm Band width 10 mm + 12 mm -Feed table with T-slots -hydraulic feed sensitively adjustable throttle -Hydraulic system pressure adjustable with gauge -Table left and right - tilting -IDEAL band crap device -Air compressor The machine is connected and can be tested with us.

Category: 201: saws
approved
dealer
New in: 2000
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

cutting diameter: 250 mm vice: 290 mm band speed: 36 / 72 m/min capacity 45 degrees: flat: 180 x 210 mm capacity 45 degrees: round: 180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: flat: 120 x 130 mm capacity 90 degrees: square: 230 x 230 mm capacity 90 degrees: flat: 280 x 200 mm saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5 / 1,8 kW weight: 610 kg range L-W-H: 1,9 x 2,04 x 1,9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 105: saws
approved
dealer
New in: 1991
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data:-diameter of roller 365 mm -Unloading 385 mm -maximum passage height 300 mm -Table size 500 x 500 mm -Table swivel around in 2 levels ± 10 ° and ± 15 ° -Table height from the floor about 1030 mm -Blade length 3100-3300 mm -stepless speed control 10-1600 m / min -Drive 400 V / 1,5 kW -Weight approx. 500 kg -Space requirement approx. B H 800 x 1850 X 1000 mm -with:-blade welder IDEAL - Hydr. Table feed -Fence

Category: 109: other metal working machines
approved
dealer
New in: 1998
Price: request quote
Location: D - 77815 Bühl
Seller: Hans Klein Werkzeugmaschinen-Handel GmbH

x-travel: 350 mm y-travel: 250 mm z-travel: 256 mm max. size of workpiece: 750 x 550 x 250 mm U-axis: +/- 70 mm V-axis: +/- 70 mm rapid traverse X/Y/Z axis: 1,5 / 1,5 / 0,6 m/min rapid traverse U/V-axis: 0,6 m/min max. concentricity: 30° / 100 mm control: AGIEVISION wire dia.: 0,1 - 0,33 mm speed of wire: 60 - 300 mm/sec wire retraction: halbautomatisch total power requirement: 9,1 kVA weight of the machine ca.: 3,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 105: saws
approved
dealer
New in: used
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data:-Roll diameter 420 mm -Throat depth 410 mm -maximum passage height 280 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 45 ° -Height approx. 1020 mm -Blade length approx. 3320-3400 mm -Saw band width 3-20 mm -Cutting speeds stepless 15-1000 m / min -Band saw blade welder IDEAL -Grindstone -Drive 400 V / 4 kW -Weight approx. 620 kg -Space requirement approx. B H 750 x 1950 X 1120 mm

Category: 2403: trucks/dumpers
approved
dealer
New in: 2005
Price: 27.900 €
Location: Land-de DE
Seller: Gassmann GmbH

; Mileage [km]: 614702; Power [PS]: 420; Gross weight [kg]: 26000; Transmission: Halbautomatik; Accessories: ABS, Bordcomputer, Differentialsperre, Klimaanlage, Tempomat, ETS - Eletronische Traktionskontrolle; Colour: Grün; Max payload [kg]: 13000; Emission class: Euro 3; Cabin: Schlafkabine

Category: 409: other packaging machinery
approved
dealer
New in: used
Price: 3.950 €
Location: Land-de DE 42489 Wülfrath, Ulmenweg 28
Seller: Michael Vogler - Vertriebsagentur

Sell a semiautomatic 4 - roll screw this. You will find more machines and accessories below: ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35837&dealer=1& ;order=1& or ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35846&dealer=1& ;order=1& visit us also at: cbv-pack

Category: 706: beverage machines
approved
dealer
New in: used
Price: request quote
Location: Land-de DE
Seller: Seegräber GmbH

For standard capsules with diameter 22-35 mm, max. 70 mm long. Alternating current 230 or 400V Capacity: app. 800 bph, depending on the operator and capsules ID5596

Category: 401: filling machines
approved
dealer
New in: new
Price: 4.650 €
Location: Land-de DE 42489 Wülfrath, Ulmenweg 28
Seller: Michael Vogler - Vertriebsagentur

Sell semiautomatic funnel Stuffer equipped with agitator. Voltage 230V. Funnel 45 liters with ClampanschluÃ? for product supply Filling volume of 15 ml 1000 ml. (depending on the filling Pistons) Option 1 - 15-250ml. Option 2 - 50 ml 1000ml. Filling quantities of 1 - 15 pieces the minute / dependent Visco and filling volume. The lifting table can option be purchased with as. You will find more machines and accessories below: ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35837&dealer=1& ;order=1& or ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35846&dealer=1& ;order=1& visit us also at: cbv-pack

Category: 1009: excavators
approved
dealer
New in: used
Price: 290 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Construction lasers, sewer construction lasers, pipe construction lasers -Kanalbaulaser -Extension cable -2 target boards Ø 150 mm Ø 200 mm -Transport suitcase

Category: 1401: shelves
approved
dealer
New in: 2009
Price: request quote
Location: Land-de DE 47800 Krefeld , Keutmannstr. 261
Seller: Lager-und Fördertechnik Namoni

<b>Properties:</b> Technical data Bars: Traverse length: 2.700 mm Beam height: 120 mm Beam width: 50 mm Load capacity: 3,000 kg Number: 227 pieces Bars: Traverse length: 2.700 mm Beam height: 100 mm Beam width: 50 mm Load capacity: 3,000 kg Number: 10 pieces Bars: Traverse length: 2.700 mm Beam height: 85 mm Beam width: 50 mm Load capacity: 3,000 kg Number: 6 pieces Bars: Traverse length: 1,800 mm Beam height: 85 mm Beam width: 50 mm Load capacity: 3,000 kg Number: 16 pieces Bars: Traverse length: 890 mm Beam height: 85 mm Beam width: 50 mm Load capacity: 3,000 kg Number: 10 pieces Properties Used pallet rack of manufacturer's META ...

Category: 106: presses
New in: 1959
Price: request quote
Location: Lager Ennepetal
Seller: Wirths GmbH, Werkzeugmaschinen

pressure: 125 t stroke: 50 mm no. of strokes: 60 - 180 Hub/min table-size: 1000 x 500 mm dimension of ram: 1000 x 500 mm distance between columns: 1100 mm distance between columns: 350 mm ram adjustment: 0 - 60 mm number of connecting rods: 2 Stück tool shank hole (depth x diameter): 100 x 60 mm total power requirement: 25 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 8 x 2 x 3,4 m Along with the machine we supply an Alba feeding line with decoiler, leveler and roll infeed. Line can work on material 300 x 3 mm. Speed of press is adjustable by a PIV gear box. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 2500: miscellaneous
New in: used
Price: 1.580 €
Location: Land-at AT 4655 Vorchdorf, Lambacher Str. 39a
Seller: 3W Handelsgesellschaft m.b.H

Albany door MP 300 Year of construction: 2008 Machine protection goal: Width: 2400 mm Height: 2200 mm several units available

Category: 106: presses
New in: 1990
Price: request quote
Location: Lager Ennepetal H 1
Seller: Wirths GmbH, Werkzeugmaschinen

pressure: 200 t stroke: 152,4 mm no. of strokes: 0- 150 Hub/min table-size: 1371,6 x 1117,6 mm ram adjustment: 0- 76,2 mm number of connecting rods: 2 Stück shut height (stroke down, adjustm. up): 660,4 mm total power requirement: 25 kW weight of the machine ca.: 26 t dimensions of the machine ca.: 10 x 2 x 4 m Complete line with double side decoiler, leveller and roll infeeder made by ALBA for 600 mm x 1-5 mm material. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106: presses
approved
dealer
New in: 1974
Price: 32.000 €
Location: Land-de DE
Seller: Silicon plus

Type: Haulick & Roos RV80 Capacity: 80 tons SPM: 65 to 400 Stroke adjustment: 10 - 80 Table size: 600 x 635 mm Year of construction: 1974 Servo feeder: Alba Wuppertal VHY300 / 0.1 Max. Bandwidth: 300mm Max. Band thickness: 3.0mm incl. greasing device and reservoir Year of construction: 09/1983 Straightening machine: Dreher / Dimeco-Besancon Working width: 300mm Decoiler: Dreher / Dimeco-Besancon Type: 2350DM Model: 531 Year of construction: 09/1978 Weight cca 12.400 kg Beside this press we have plenty of Bruderer BSTA high speed presses.

Category: 109: other metal working machines
approved
dealer
New in: 1997
Price: request quote
Location: D - 77815 Bühl
Seller: Hans Klein Werkzeugmaschinen-Handel GmbH

x-travel: 350 mm y-travel: 250 mm z-travel: 256 mm max. size of workpiece: 750 x 550 x 250 mm U-axis: +/- 70 mm V-axis: +/- 70 mm rapid traverse X/Y/Z axis: 1,5 / 1,5 / 0,6 m/min rapid traverse U/V-axis: 0,6 m/min max. concentricity: 30° / 100 mm control: AGIEVISION wire dia.: 0,1 - 0,33 mm speed of wire: 60 - 300 mm/sec wire retraction: halbautomatisch total power requirement: 9,1 kVA weight of the machine ca.: 3,6 t dimensions: 2,21 x 2,21 x 2,22 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 105: saws
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL 8531 Lemmer, Kadijk 6
Seller: Valk Machines B.V.

Vertilkale band saw Jaespa Saw height: 450 mm Throat depth: 610 mm Table Lxw: 600 x 600 mm Table tilt: 30 ° left / right equipped with:-band Sage Schweisseinr. Country of origin: Germany Machine weight: 700 kg

Category: 104: grinding machines
approved
dealer
New in: used
Price: request quote
Location: Lager
Seller: BEMA

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m Überho ...

Category: 106: presses
approved
dealer
New in: 1983
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Pressing force: 2500kN, overrun distance: 38mm, connected load: 50kW, controls: S7-300, weight: 20t, including Metal Sheet System ALBA.

Category: 104: grinding machines
approved
dealer
New in: used
Price: request quote
Location: Lager
Seller: BEMA

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-40 mm/Ø : 0-40 mm/Ø : ±6,5 ° longitudinal feed of the table: 1530 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m Überholt ...

Category: 105: saws
approved
dealer
New in: 1963
Price: request quote
Location: Land-de DE 91126 Schwabach, Bremer Straße 8
Seller: Schrenk Werkzeugmaschinen

Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable

Category: 104: grinding machines
approved
dealer
New in: used
Price: request quote
Location: Lager
Seller: BEMA

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,48 x 2,0 m Foto ...

Category: 105: saws
approved
dealer
New in: 1972
Price: request quote
Location: Land-de DE 91126 Schwabach, Bremer Straße 8
Seller: Schrenk Werkzeugmaschinen

. The band wheels are new rubberized! . Throat depth 410 mm Max cutting height 260 mm . Inclinable table 600 x 600 mm . 8 speeds: from 12-375 m / min .

Category: 104: grinding machines
approved
dealer
New in: used
Price: request quote
Location: Lager
Seller: BEMA

grinding diameter: 350 mm grinding length: 600 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±10 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m Überho ...

Category: 105: saws
New in: 2005
Price: request quote
Location: Land-th TH Bangkok
Seller: OPEX MACHINERY PTE LTD

UZAY Semi-automatic Bandsaw Model: SY 420 Year:2005 Capacity - round: 420 mm. Rectangular - 420 x 460 mm Condition: excellent

Category: 104: grinding machines
approved
dealer
New in: used
Price: request quote
Location: Lager
Seller: BEMA

grinding diameter: 250 mm grinding length: 600 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m  ...

Category: 402: packing machines
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL 9741A Urk, Makkummerwaard 3
Seller: Scotraco B.V.

Henkelman polar 80 vacuum machine One of the strongest and largest single chamber vacuum-machines from Henkelman. Equipped with a large 100 m3/h Busch pump this machine can work very fast. In combination with 2 large sealbars it can process many cycles per hour for 24 hours per day. Constructed out of stainless steel, therefore easy and safe to clean in minutes. Have a look at the video below for an impression. Specifications Chamber dimensions(LxWxH): 510x760x200mm Machine dimensions(LxWxH): 790x920x1125mm Seal bar length: 800/500 mm Pump capacity: 100 m3/h Machine cycle: 15-40 sec. General • Single and double chamber floor models • Stainless steel housing • Stainless s ...

Category: 105: saws
approved
dealer
New in: used
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 110 mm cutting diameter: 110 bei 45° mm capacity 90 degrees: flat: 305 x 20 mm dimensions of saw-blade: 400 x 5 x 50 mm feeds - fine adjustment: 0 - 1000 mm/min rapid return speed: 3.300 mm/min mitter cutting - all-position: +/- 90 ° total power requirement: 1,8 / 2,6 kW weight of the machine ca.: 850 kg. range L-W-H: 1.080 x 1.450 x 1.750 mm Hydraulic workpiece clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 842: paper converting: die cutters
approved
dealer
New in: 1992
Price: request quote
Location: Land-pl PL 43-30 Bielsko-Biala, ul. Derkaczy 24
Seller: M-Vision

Albareda Strumber - hand platen for cutting and creasing frame internal 100 x 140 cm material size 107 x 148 cm pressure approx. 350 T engine 7,5 kM weight approx. 7 T

Category: 105: saws
approved
dealer
New in: new
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 502: presses
approved
dealer
New in: 1992
Price: request quote
Location: Land-ch CH 4806 Wikon, Industriestr. 2
Seller: Hunkeler Systems AG

Pressure 45to Spec. Pressure 70N/cm2 Dimensions of the press channel cross-section H 800 mm; B 800 mm Filler B 750 X 1350 mm Cycle time theo. 20 sec Performance theo approx. 140m 3/h Motors 380 Volt Three-phase 50 Hz Pump motor 22kW + 9kW. No. 18'536 Built in 1992 Availability now, pricing reserved factory Wikon, sale Net price from space as seen

Category: 105: saws
approved
dealer
New in: 2004
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

cutting diameter: 120 mm saw blade diameter: 370 mm stroke: 180 x 100 mm vice: 190 mm capacity 45 degrees: I horizontal: 125x95 mm capacity 45 degrees: round: 110 mm capacity 90 degrees: flat: 180x95 mm capacity 60 degrees: flat: 90x95 mm capacity 60 degrees: round: 90 mm dimensions of saw-blade: 370x32x2,5 mm engine output: 5,6 kW weight: 640 kg range L-W-H: 0,9 x 1,5 x 1,91 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)