al saw used for sale

Technical data in image

Vibro screening machine Allgaier type D 950/I Upgrade to Type 950/II Two Vibromotors 0.5 kw Second screen deck, screen elevation 100 mm stainless steel New wire sieve

Fine grinding plant consisting of: Alpine 630 AFG fluidized bed counter-jet mill (V ges: 885 dm3, 10 bar pressure-shock-resistant, saerterrad fold-out), feed station, cyclone, 2 pcs. EX-protection valve, control cabinet and 4 pieces of product buckets. Previous use: Grinding of toner. The system can be inspected in a disassembled condition. Available at an additional cost: Dust filter Bühler PGFG 60/18 (39 m2 filter area).

Ultra fine grinding plant, consisting of: Fluid bed opposed jet mill Alpine 630 AFG (V total: 885 dm³, 10 bar shock pressure resistant, fold out classifier wheel), cyclone, 2 pcs. EX shutter valves, control cabinet and 4 pcs. product containers. Prior use: Toner production. Plant can be inspected in already dismantled state. Available for an additional charge: Dust filter Buehler PGFG 60/18 (39 m² filtering surface).

Used mill Alpine 500.

Stock number: UG6204 Second hand, refurbished, stainless steel plate heat exchanger by Alfa Laval type CLIP 6-RH (C6). Plates designed in stainless steel AISI 316L. Working volume 68.2 l. Working pressure 16 bar, test pressure 21 bar. Working temperature in range from 0 up to 110 C. Connections are DIN 11851 DN50. Exchanger is mounted on stainless steel frame. Gaskets designed in NBR, mounted without a glue, type clip-on. Unit is cleaned and leak tested. Last time used on food. Includes stainless steel covers.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Description This is a long gap mill type LGM 4, which can be used for grinding and drying. Origin and Condition The long gap mill was used for several years in our pilot plant as an experimental machine. During this time various products were ground and dried. Technical data Drive power: 18,5 - 55 kW Air volume: 2500 Nm³/h Evaporation capacity: 120 kg/h

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery This used Alpine wet agitated ball mill 90 AHM has been used in recent years as an exhibition machine and demo machine for customer trials. The machine is in excellent condition and is sold with many accessories. Due to its size it´s perfect for lab scale production and R&D tests. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close cir ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant With the Bexmill A BM soft to medium-hard substances are crushed gently. The Bexmill is also called basket type mill or conical mill. The mill can be charged both, continuously and discontinuously. From the feed unit the material to be crushed reaches the grinding area. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Bexmill A BM is a basket type mill or conical mill that can process soft to medium-hard substances. The gentle communition ensures the required particle size is obtained in one pass avoiding product damage and generating a minimum amount of fines. It can be operated both continuously and batchwise. A variety of screens are available in different shapes and opening sizes, they can be quickly exchanged without the use of tools to adapt to the desired task ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The demonstration unit has so far only been used at trade fairs and for demonstrations. The machine is therefore as good as new. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without vacuum cleaner) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 2 ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, gr ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Hosokawa Alpine 250 TTSP air classifier specifically designed to produce the perfect fineness cut for toner, can be used in connection with the Alpine 630 TFG jet mill Design: non PSR Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Wear protection: without Scope: 250 TTSP with 2 x 5,5kW motors, process gas distributor, filter, blower

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Classifier jet mill Hosokawa Alpine 630 TFG specifically designed for toner grinding, can be used together with the Alpine 250 TTSP air classifier to produce the perfect product. Design: non PSR Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Wear protection: without Scope: 630 TFG with 18,5kW motor, process gas distributor, rotary valve, filter, rotary valve, blower, control cabinet

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the roll ...

--> Grinding blades in the opposite direction. Suitable--> mill for the processing of spices. 2 drives: 15 KW + 7.5 KW.

plate thickness: 5,0 mm tube diameter: 27,9 - 61,0 mm motor: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 93 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alpina type Swipper Model 15 12 Year 2005 with outfeed conveyor and hanger loop dispenser

: 1800 mm efective widths: je 400 mm length in total: 2000 mm length in width: je 500 mm carrying capacity: je 3000 kg material: Aluminium weight: je 33 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wall thickness max.: 5 mm wall strength: VA 4 mm : 26,9/33,7/42,4 /48,3/60,3 mm : 3/4, 1,1 1/4, 11/2 ,2 Zoll total power requirement: 2,2 kW voltage: 230 oder 400 V weight of the machine ca.: 87 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wall thickness max.: 4 mm : 27 - 61 mm wall thickness: VA 3 mm mm weight of the machine ca.: 7 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant New mill never used, in former design. ACM 40 EC Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindrical classifying wheels. • Cool and gentle grinding thanks to high air fl ...

For sale is a used base plate with accessories. For sale only within Europe. Price factory Travenhorst. Foundation plate No.: 543688 80, 3x Holder 528729 02, 9x Screw Tel: 0049 45569819444 ---------------------------------------------------------------------- ------------- Our company: For many years now, we have been supporting national and international companies as a recovery plant for separators. In our new plant, Alfa Laval and Tetra Pak separators / centrifuges are generally overhauled at the highest level for our customers and converted on request.Our centerpiece, the test bench, is constantly being expanded in order to reach the highest performance of the various machines permanently and reliably. As a result, our customers profit from the modernized separators in terms of availability and costs. Benefit from our experience - benefit from our services!

System: Used decanter / centrifuge Manufacturer: Alfa LAval Model: full coat screw centrifuge Type: AVNX 937 (or NX 4550) . No.: 501.8151.1994 B.: 1994 Drum inner diameter: 450 mm L/D = 5/1: Material: Stainless steel

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery This used wet agitated ball mill Alpine 132 AHM has been used in recent years as an exhibition machine and demo machine for customer trials. The machine is in excellent condition and is sold with many accessories. Due to its size it´s perfect for lab scale production and R&D tests. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close ci ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Used Hosokawa Alpine ACM 30 classifier mill, in normal steel, NPSR, non ATEX. Consisting of complete mill with motors Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindric ...

CNC WORKING CENTER type ALBERTI EDIT 3000 composition : 1. boring unit ( axe X and Y ) , vertical nad horizontal independent mandrins 2. vertical router 3. horizontal router CNC 90 by TPA volt. 380/50

FOR SALE... FOR SALE ALFA LAVAL MIB 303S 13/33 YOB 2011 AT TURKEY TO WHOM IT MAY CONCERN; WE VE USED ALFA LAVAL MIB 303S 13/33 YOB 2011 AT STOCK READY TO SHIPMENT IF YOU INTEREST PLS LET ME KNOW Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 .aliagamarine.com TURKEY

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-160 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 100 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 pc TIG burner Alphaweld SR-17, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 pi ...

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-200 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner Alphaweld SR-26, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1  ...

56x76cm

38x56 cm

Drilling capacity in steel / cast iron 50/65 mm Drilling capacity in steel 70 mm Feed 0.1 - 0.54 mm / Rev Speed 62-1240 RPM Recording MK 5 spindle stroke (drilling depth) 240 mm Usable projection 385 mm Table 800 x 680 mm Spindle head diameter 70 mm Height 2350 mm the machine

No.: 2324 1 used strand-pelletizer Alphatec type AS-G 200 E year 2019, very good condition - lab / demo use only working width: 200 mm drive 7,5 KW – AC frequency controlled cutting rotor with hard-metal teeth pneumaticm pressure roller device Machine is ready for demo. More strand-pelletizer ex our Stock available: Scheer, Automatik, Rieter, IPS, AlphaTec, Pelltec, .. Our actual machine stock-list you can find on our Homepage: plasticotrading.de

Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)

Key data: 550

Center height: 550 mm Center distance: 2500 mm Spindle bore: 128 mm Workload 4.500 Kg Flying in chuck 1600 Kg Swing over bed Ø:        1.100mm Swing over cross slide Ø:780mm DBC Turning Length:      2.500mm Spindle bore:            128mm Spindle power:           37kW Bed width:               600mm Tailstock spindle Ø:     125Ø Stroke pinole:           270mm Spindle taper:           6Mk Speeds / ranges:         900Rpm Length:                  4.800 mm  Width:                   2.200 mm  Height:          &nb ...

1 of used bag-in-box filler, make Alfa Laval, type Piccolo, semi-automatic, new 2011. With nitrogen connection. Used for filling apple-juice and wine in 2 and 3 liter bags with Vitop caps.

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Valve matrixes, completely mounted with switchboards, IFM proximity switches, wiring, etc.in very good condition, was in operation until March this year. Island 1 consisting of 25 pieces A-L SMP-SC spillage free mixproof valve, DN65, double seatlift and flush on lower seal, in 5x5 configuration. 37 pieces A-L SRC valves, different types, DN65 and DN50. 4 pieces A-L LKAP valves Island 2 consisting of 24 pieces A-L SMP-SC spillage free mixproof valve, DN65, double seatlift and flush on lower seal, in 6x4 configuration. 24 pieces A-L SRC valves, different types, DN65 and DN50. 5 pieces A-L LKAP valves

Drilling capacity: 32 mm Throat: 0 mm Spindle taper: 150   MACH-id    5460 MAKE        Alzmetal TYPE          Alzrapid 32 YOP             1998 SPECIFICATIONS Max. drill Ø steel      32 mm Max. drill Ø cast       40 mm Max. tap Ø      24 M Arm Length    725 mm Stroke pinole        150 mm Throat       400 mm Spindle Taper      4 ISO/Bt/Mk Speeds / ranges        3000 Rpm Table Length        1175 mm Table Width          525 mm Power       3 kW DIMENSIONS Length        2600 mm Width         2000 mm Height    &n ...

-Peak height 240mm -Peak width 1000mm -Control Siemens -Circular permes.about bed 490mm -Umlaufdurchmes.ü.Planschlitten 195mm -Crumpling 520mm -Spindeldurchmes.im in front. Bearing 100mm -Spindle bore 63mm -Torque 736Nm

Turning diameter: 680 mm Turning length: 1500 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 21 iTB MACH-id   4201 MAKE       VIPER ALEX TECH TAiwan TYPE         VT 30 BLM 1500 YEAR        2006 SPECIFICATIONS Swing over bed Ø    680 mm Control      FANUC 21 iTB Swing over cross slide       480 mm Distance between centres     1500 mm Spindle bore      110 mm Spindle speeds / ranges     3000 Rpm Power       26 Kw DIMENSIONS Length       5400 mm Width         2000 mm Height        2200 mm Turret with 12 positions Driven tools with Rpm C axis

Turning diameter: 680 mm Turning length: 1500 mm Turret positions: 0 CNC Brand: Fanuc MACH-id   4202 MAKE        VIPER ALEX TECH Taiwan TYPE          VT 30 BLM 1500 YEAR         2006 SPECIFICATIONS Swing over bed Ø    680 mm Control        Fanuc 21 iTB Swing over cross slide      480 mm Distance between centres      1500 mm Spindle bore      110 mm Spindle speeds / ranges    3000 Rpm Power      26 Kw DIMENSIONS Length      5400 mm Width       2000 mm Height       2200 mm