129,386 used machines on RESALE, but how to find them? Machine Search
1 of used glass bottling line for still and carbonated water Used for glass bottles 330 ml (D 61,3 x H 207,9 mm), 750 ml (D 78,0 x H 294,9 mm) and 1.000 ml (D 88,3 x H 318,7 mm) at speeds (limited by filler capacity) between 6.000 (1.000 ml) and 10.000 (330 ml) bph., mostly new 2000, plcs: Modicon, consisting of Ave Alta Meccaniche DBR50 bulk-bottle depalletizer, AVE 5.000 lph carbonator, AVE 24/24/6 rinser/filler/capper (28 mm ROPP), Kosme Unicol 720-9-2 dual-aggregate wet-glue labeler (new 2013!), Domino laser coder, Freemantle tray erector, Ave Alta Meccaniche type Inca 1T pick&place tray loader, (single-head machine, with heads for 12x 1000 ml, 12x 750 ml and 24x 330 ml), Dimac Starfilm LS film-only shrinkwrapper (overwrapping of trays), Ave Alta Meccaniche PABR 50/1 Palletizer. Some interconnecting conveyors.
Inquiry number 390223 Machine Type Kieserling Four Hammers Sharpening Machine Working range round fishing: from Ø 15 mm to Ø 115 mm / folding fishing: from Ø 20 mm to Ø 120 mm Flow direction: Automatic loading at the front Speed up to 100 mm/sec Make Kieserling / Type AVS 63 Year of construction 1981 Overhaul in 2024 Location NRW Length approx. 2,500 mm Width approx. 930 mm Height approx. 1980 mm Weight approx. 5,280 KG Country of origin: Germany Delivery time by arrangement Delivery terms ex works
From insolvency: Avola ZB 400-5 Year of construction 1996 No.51809 380 volts 130mm cutting height Saw blade 400mm Table size approx. 1030x740mm
AvK Synchronous Generator DIG 120 h/4 1370 KVA 10500 V 75 A 50 Hz, 1500 rpm. Accessories: - 2 sets Winding PT100 - DM110 Digital Regulator NEW Condition (NEW)
1 of used capper for sports-caps, make Officine Ave, type TAR 8T Pick&Place, new 1997, operates from left to right. Used for 500 ml PET bottles.
Product number: 2914 Type: AV250 Serial number: 06089-1 Year of construction: 2006 Hole plate diameter: 250 mm Hopper: 800 litres Power: 3 x 400V, 50Hz, 78kW Dimensions: 1650 x 1700 x 2400 mm Weight: 1750 kg 3 speeds on feed screw, 2 speeds on working worm
AvK Synchronous Generator DIG 110 i/4 1080 KVA 10,000 V 62 A 50 Hz, 1500 1/min. Accessories: - 2 sets Winding PT100 - Cosima N+, QPF, CUN Completely overhauled with new bearings.
Continuous mixer, single-shaft mixer, trough mixer for bulk materials used Manufacturer: AVA-HUEP GmbH Type: HTK 2100 Year: 1999 Capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm Outlet approx. 600 x 360 mm Drive with geared motor 55 kW RPM 380/660 V Dimensions Total approx. 6000 x 2000 x 2000 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Automatic Channel Baler Manufacturer: AVERMANN Type: AVOS 1211-15/50 Year of Make: 2015 Operating hours: approx. 2,850 h specifications: Press force: 50 t Specific pressing force: 6.49 kg/cm² Drive power: 15 kW Total connected load: 22 kW Throughput: at 35 kg/m³ bulk density: 2.7 t/h at 60 kg/m³ bulk density: 4.7 t/h at 100 kg/m³ bulk density: 6.5 t/h Filling opening: 1,200 x 1,100 mm Channel format: 1,100 x 700 mm Bale weight: up to approx. 400 kg Machine weight: approx. 8,500 kg
Electric Pallet Truck->Low-Floor Truck->Passenger Seat Particularities: - Special body for the safe transport of Muller Martini FlexiRoll stands (print buffer system) - Can be converted to standard version on request - Battery renewed about 3 years ago - Incl. battery service unit (pull-out, stand with wheels) - incl. charging station
AVIA AVIATURN 35 CNC turning center was built in 2022 in Poland. The machine, designed for precision machining of workpieces with a maximum diameter of 350 mm, has been equipped with many state-of-the-art solutions and high-quality components that ensure excellent turning results. The workspace includes, among others, a 12-position turret and a reliable spindle driven by a belt drive with encoder. The AVIAturn 35 CNC lathe is also distinguished by its richly ribbed, single-piece cast iron bed. The bed, which is inclined at 35°, effectively dampens all vibrations and oscillations, resulting in, among others, improved workpiece surface quality and increased cutting tool life. The machine’s extensive equipment includes, among others, a hydraulically movable tailstock, a tool probe and a SIEMENS CNC control in its most powerful version with a wide range of built-in fixed cycles and 16 ...
Milling machine - Universal Make: AVIA Type: FND 25 Year of construction: 1984 Control type: conventional Country of origin: Poland Delivery period: right away Technical details x-way: 400 mm y-way: 360 mm z-Way: 400 mm Mounting table: 800x400 mm Tool holder: SK40 Quill Hub: 100 mm Speed: 40...2000 rpm Total power requirement: 4.5 kW Machine weight approx.: approx. 2.4 t Space requirements approx.: L:1.6xW:1.3xH:2.0 m
MEP AVT400 Capping machine Serial: 271221 2021, Stainless capper, Robust and easy to use capping machine suitable for applying ROPP, screw caps onto bottles with screw thread necks. Max bottle diameter 195mm, max bottle height 355mm, Up to 400 - 600 bottles per hour, mobile, 1Ph
grinding length: 2100 mm grinding width: 600 mm workpiece height: . mm magnetic plate size: 2000x600 mm total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Van Rietschoten & Houwens 430-301E Exhaust Gas Averager
Casting machine for balancing weights - steel rims Zinc die-cast Serial number: 02887 PLC type: Siemens S7 including spiral conveyor RNA Type SR8-B-250-2L Operating voltage: 3x400V, 50Hz, Control voltage: 24V, PLC control voltage: 24V, Current consumption: 25A, Pneumatic connection values: connection 3/8, Operating pressure: 5bar, Dimensions: LxWxH: 2900x2380x2410mm, Continuous sound level: max. 78dB, Lyzi0m8jq Weight: approx. 1800kg, air consumption: approx. 100l/min, Control cabinet with Siemens control, Update: last 07/30/2021
AVK generator , alternator 2840 kva 400volt year 2008
used
Manufacturer: CMS Model: Avant-1/B-560-TX3/RR with a digital table Year of Manufacture: 2006 Type of Machine: 4-axis CNC machining center with a moving bridge - Moving bridge design with two racks. Fixed table during machining. - Welded steel support frame stabilized by double heat treatment - Mobile bridge supporting a set of two crossed slide carriages for transverse and vertical movement - Travels: o X axis: 5600mm o Y axis: 2050 mm o Z axis: 300 mm - Working and positioning speed: o X axis from 0 to 60 m/min, positioning speed of 60m/min o Y axis from 0 to 100 m/min, positioning speed of 100m/min o Z axis from 0 to 30 m/min, positioning speed of 30m/min - Automatic centralized lubrication - TX3 vertical head with tool changer mounted on Z-TX3/12/L vertical carriage o Head power: 15kw at 18000 rpm o Programmable rotation speed of 1800 to 24000 rpm o HSK63E cone - 2 ...
Manufacturer: IMA, Motor mit Getriebe: yes, Getriebe: K803AB0570D132L4, Amper 1: 50, Power kW: 9,2, N1-U/min: 1598, Motor mit Getriebe: yes, Getriebe: K803AB0570D132L4, Year :1996
Model: Avon 1533-56L Year of Manufacture: 1992 Type: Aeroderivative Gas Turbine Rated power: Approximately 16,347 kW (22,225.73 hp) to 17,007 kW (23,123.08 hp) DIRECTINDUSTRY Thermal Efficiency: Up to 44% Dimensions: Length: Approx. 3,200 mm Diameter: approx. 907 mm Weight: Approximately 1,310 kg
Saw blade diameter: 750mm, saw blade speed: 2200/min, table dimensions: 1500x1500x900mm, cutting height 90°/45°/30°: 295/200/137mm, motor power: 16kW, length: 1800mm, width: 1500mm, height: 1100mm, weight: 650kg. On-site inspection is possible.
Description MORETTO Dehumidifier Group composed of: Moretto two-tower dehumidifier Power: 16.4 Kw Power supply: 400 V / 3 F + N + T Process temperature: 70 - 150 °C Air flow rate: 120 - 200 m3/h 2 Moretto hoppers Approximate capacity each hopper: 600 dm3 1 Moretto suction valve RIGHT MOLECULAR SEDACCIO REPLACED 12/09/2024, BLOWER WORKS THROUGH INVERTER, WITH 4 CONNECTION PIPES EACH ONE OF 3 METERS.
AVERY DENNISON label maker. ALX 720 print head., Elec: 400 V / 50 Hz , Maximum format (width) mm: Less than 60 mm , Maximum cadence / minutes: ca 60 products / minutes , Pressure: 4-6 bars , Print speed: 2 to 30 m/min , Conveyor dimensions (mm): length: 2000 mm / width: 82 mm
A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible.
A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats ...
Mixer Manufacturer : AVA Huep GmbH & Co. KG Type: HTL 3 Power: 1.1 kW Content: 4 liters gross volume Technical specifications : Stainless steel mixers for powdery to paste-like products Dimensions Speed 15-400 rpm, rated speed 128 rpm Frequency-controlled Width approx. 512 mm Height approx. 701 mm without table Length approx. 1076 kg Weight approx. 200 kg Documents: available
Traction test Avery Denison T42 50 tons low price - ideal for retrofit The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools
Pieri brand film palletizer, model AVR-101-PEA. Bridge system with wraparound movable arm. Solid and automated structure. Brand: Pieri Model No.: AVR-101-PEA Type: Bridge with movable arm Total height: 2.5 m Automatic pallet wrapping machine
Was used for sludge/water separation. In perfect working condition. Stainless steel drum and rotor. Sale without quarantee, as is where is.
An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible.
Agfa Avalon N4-30 PT-R4600E, Year 2018 only approx.16K plates done Apogee Workflow RIP Inline punch Stacker ST 95EX Azura C95 Clean out unit Etc. Available: at short term
x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm Control: Heidenhain TNC 410M table surface area: 800 x 400 mm tool taper: ISO 40 spindle turning speed - stepless: 50 - 4000 U/min main drive motor: 5,5 kW total power requirement: kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: m CNC control HEIDENHAIN TNC 410M Coolant equipment Machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reach: 505 mm Payload: 4 kg Robot weight: 28 kg Control: Control module + hand control Robot table: profile frame, approx. 800 × 960 mm
cutting range for steel to: 35.0 TS mm cutting range for steel to: 25.0 QS mm ampere: 20 - 65 Ampere cutting medium: Druckluft voltage: 400 V output: Eingang 7.8 KW weight: 51.5 kg range L-W-H: 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The air plasma cutting system Avalon 65 AIR with integrated Compressor is your reliable partner for the demanding Mission. Make separation cuts up to one with the Avalon 65 Air Material thickness of 18 mm. Characteristics : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc properties - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch to activate airflow around test air pressure . without having to trigger the burner - Intelligent protection function protects the plasma torch . from damage su ...
cutting range for steel to: 12.0 TS mm cutting range for steel to: 8.0 QS mm capacity at 100%: 30.0 Ampere cutting medium: Druckluft output: von 20 - 40 Ampere output: Eingang 4.9 KW voltage: 230 V weight: 17,9 kg range L-W-H: 480 x 210 x 340 mm The Avalon 40.1 is a light, handy plasma cutting system with high Cutting performance and top cutting quality. Their light weight and simplicity Handling makes them the ideal candidate for crafts, workshops and Industry. Cuts carbon steel, stainless steel, aluminum, copper... Characteristics - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow to test air pressure . without having to trigger the burner. - Powerful compact system - Intelligent protection function protects the plasma torch from damage such as incorrect air pressure, missing wearing parts, overloading of the . pilot ...
cutting range for steel to: 15.0 TS mm cutting range for steel to: 10.0 QS mm capacity at 100%: 25.0 Ampere cutting medium: Druckluft output: von 20 - 40 Ampere voltage: 230 V Air consumption: 230 l/min. output: Eingang 4.9 KW weight: 8.0 kg range L-W-H: 505 x 147 x 305 mm The Avalon 40.1 is a light, handy plasma cutting system with high Cutting performance and top cutting quality. Their light weight and simplicity Handling makes them the ideal candidate for crafts, workshops and Industry. Cuts carbon steel, stainless steel, aluminum, copper... Characteristics - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow to test air pressure . without having to trigger the burner. - Powerful compact system - Intelligent protection function protects the plasma torch from damage such as incorrect air pressure, missing wearing parts ...
Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph delivers high efficiency and versatility for the bottling industry. Specifically, it handles medium to high-speed production lines, ensuring consistent and reliable results. Furthermore, the machine for Stelvin Lux uses six capping heads to provide precise and uniform operation throughout every bottling cycle. Moreover, its design maximizes production speed, enabling the handling of up to 7000 bottles per hour. This performance, in turn, supports businesses aiming to improve operational efficiency and maintain consistent product quality. The system supports aluminum screw caps of the Stelvin Lux type, measuring 30×60 mm. Consequently, this cap type creates an airtight seal, preserving product integrity and extending shelf life. Producers in the wine and beverage industry often choose this forma ...
An AVT flat film packaging machine including an angled conveyor belt is available. Film type: PE/PP, film width range: 120mm-600mm, film thickness range: 40µm-200µm, machine dimensions X/Y: approx. 1400mm/1400mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible.
MCA automatic capping machine with false capping detector Running Direction: Right-Left Adelski Pv 6541/1/210 AVM2104 Capacity: 10,000 bottles/hour Format parts1l/0.75l Schlegel/Bordeaux Burgundy/0.25l/0.5l
used
Key data: 650 mm, 600 mm, 620 mm
From a current recycling we offer you a CNC machining center from the manufacturer AVIA, type VMC 650 V. Year of construction:2023 Condition: normal signs of wear Hours: Asking price: VHB Original price: 120.000 € Equipment / accessories / other information: x/y/z 650/600/620mm, Table 800x550mm 30 mm tool magazine Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: The sale is without warranty Subject to prior sale
General SKU401W1244 LocationBarneveld MakeAva-Huep TypeHTC2100 No.5974 Year of construction2009 Main Features MaterialStainless steel Volume2100 Ltr. Motor55 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-arms10 pieces Capacity2100 l. Useful capacity1600 l. Trough sizesDia. 960x2800 mm Inlet900x1400 mm Inspection hatch550x300 mm OutletDia. 350 mm Max. temperature+5°C/+80°C Glands air purgedcheck Motor55 kW, 400 volt, 1460 rpm Speed mixing shaft35 rpm With lump breakercheck 3x Motor5,5 kW, 400 volt, 1438 rpm (3x) MaterialStainless steel 1.4571 (316Ti) Information Total height1,36 m Weight5000 kg Floorspace5,72x1,76 m Extra SpecificationsWithout outlet lith. paddles are equipped with hardop welding. Powder turbo mixersAva-HuepMixers > Powder turbo mixersBrand > Ava-Huep What you can expect from Foeth: -- Machine is in working conditio ...
General SKU359U941 LocationBarneveld MakeAVT Europe No.2016-110110 Year of construction2017 Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialStainless steel, Stainless steel 1.4301 (304) Powder fillercheck Number of dosing heads:1 Capacity140 l Dosing with vibro feederscheck With hoppercheck volume 140 l Information Mounted in framecheck With switchcheck Floorspace2,0 x 1,6 m CEcheck Total height3,2 m Weight990 kg Extra SpecificationsWith lifter, type PW-2/250. load cap. 380 kg. lift range 1450-1950 mm. dim. 1680x1600x3175 mm. 400 volt, hopper, Flintec weighing unit, type FT-13, range 2-6000 gramm, e=40 gramm, digital control Technical specs Extra information- Powder fillersAVT EuropePackaging machines > Powder fillersBrand > AVT Europe What you can expect from Foeth: -- Machine is in working condition -- At a red ...
For sale is an AvK DIG 130 k/4 generator with the serial number 83 31639 A101. This model was originally paired with a Jenbacher 612 engine with design number R049. The generator has an output of 3,000 kVA at an output voltage of 6,300 V. The year of construction is 2013, the operating hours so far are 60,000. A Megger test was performed. The price of this generator is 15,000 euros. For more information or to arrange a viewing, please contact us.
General SKU319U743 LocationBarneveld MakeAviteQ vibrationtechnik TypeR1665/219-E MVD50-4-01 No.7304481-002 Year of construction2006 Main Features MaterialStainless steel Length1960 mm Width210 mm Specified Features - Vibro feeder MaterialStainless steel 1.4552 Vibro feedercheck Feeder diameter210mm Feeder length1960mm Closedcheck InletDia:200mm OutletDia:200mm With vibro motorcheck With motor0,55kW, 380/420Volt (EX) Without controlscheck Information Total height0,9m Weight170kg Floorspace2,3x0,5m ATEX compatiblecheckVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU250X205 LocationBarneveld MakeAviteq TypeKF12-2 No.7300171 001 Year of construction2007 Main Features MaterialStainless steel Length750 mm Width400 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width400 mm Feeder length750 mm Opencheck With hoppercheck InletDia. 500 mm Outlet400 mm With vibro motorcheck With motor230 volt, 3000 rpm Information Mounted on framecheck With switchcheck Weight160 kg CEcheck Floorspace1,00x0,80 m Total height1,44 mVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU250X206 LocationBarneveld MakeAviteq TypeKF12-2 No.13302484 001 Year of construction2013 Main Features MaterialStainless steel Length750 mm Width400 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width400 mm Feeder length750 mm Opencheck With hoppercheck InletDia. 500 mm Outlet400 mm With vibro motorcheck With motor230 volt, 3000 rpm With frequency controllercheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight80 kg CEcheck Floorspace1,00x0,80 m Total height2,50 mVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vi ...
UNUSED - Speed: 3.000 RPM - Frequency: 50 Hz - Voltage: 400V. - Amperage: 41A
UNUSED - Size: 1.250 x 900 mm (Stainless steel) - Magnetic Vibrator: MV E (3 kW / 1.500 U/min) - With Tyristor controller
maximum number of results exceeded
please refine your search
