aj used for sale

turning diameter: 400 mm turning length: 1000 mm control: FAGOR control: CNC 8055/B-T centre height: 200 mm centre distance: 1000 mm turning dia. over face-slide: 210 mm bed width: 300 mm spindle bore: 65 mm spindle turning speed range: 0 - 3000 U/min transmission ratio: 2 feeds - longitudinal: 0 - 10.000 mm/min feeds - cross: 0 - 10.000 mm/min rapid travel - longitudinal/face: 15 m/min tailstock quill diameter: 68 mm tailstock quill stroke: 155 mm tailstock taper MT: 4 total power requirement: 8 kW weight of the machine ca.: t dimensions: 3,1 x 1,9 x 1,78 m Accessories: 3-jaw chuck, MULTIFIX-tool post with various inserts, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ajan 12000 mm x 3000 mm Plasma and Oxygen Cutting Machine Machine is in good working condition

Ajan PP 260 A Plasma Cutting Machine Machine is in good condition

Ajan 12000 mm x 3000 mm Plasma Cutting Machine All maintenance has been done by authorized service Cutting table : 12000 mm x 3000 mm 4 axis

Ajan PL-OC 30140 Plasma Cutting Machine HPR 260 Machine is in good working condition

Ajan 12000 mm x 3000 mm oxygen and plasma cutting machine like new condition 260 Amper Machine has been used approximately 1 month It is like new condition Pipe cutting tools can be connected to the machine

Ajan 6000 mm x 2000 mm Plasma and Oxygen Cutting Machine 130 Amper 6000 mm x 2000 mm Maintenance has been done Machine also has oxygen cutting feature Machine is in good working condition

Ajan 20006000 mm Plasma Cutting Machine Machine is like new condition, only 2 months used

Machine has been fully revised in January 2023 Machine is like new condition

Ajan 2000 x 6000 mm Plasma and oxygen cutting machine Machine is in good working condition

Ajan PP 260A 2000 mm x 6000 mm pla 260 Amper Pipe cutting preparation Machine is in good working condition

6000 mm x 2000 mm 260 Amper Offer including compressor,air tank,dryer 52 Kw Machine is in good condition

Ajan PP 260 A Plasma and Oxygen Cutting Machine 260 Amper Table size : 3000x9000mm

Ajan PP 260 A Plasma Cutting Machine Cutting length : 12000x3000 Machine is in good condition

Ajan PP 260 A Plasma Oxygen Cutting Machine 3000 mm x 12000 mm 260 Amper Machine is in good condition

Ajan PP 130 A CNC Plasma Cutting Machine Cutting area : 2000 mm x 6000 mm 130 Amper Working hour : 982

Ajan PP 260 A Plasma Cutting Machine Table size : 3000 mm x 12000 mm Pipe cutting unit up to 600 mm diameter 260 Amper 4 axis head Jet filter OXY Fuel Unit All maintenance has been done by authorized service

Ajan Pipe Cutting Machine Machine is like new, still under warranty 260 Amper Minimum Pipe diameter : Ø 48mm Maximum Pipe Diameter: Ø 600mm Maksimum Thickness: 40mm

5 axis 6000 mm x 2000 mm 4000 W 6 Amper Air tank, cooling pool Machine is like new

Ajan 12000 mm x 3000 mm Plasma Cutting Machine 260A Machine is in good working condition

Ajan 12000 mm x 4000 mm plasma and oxygen cutting machine All maintenance has been done regularly by Ajan authorized service 2 pieces jet filter are included Machine is in good working condition

Ajan 3000 x 12000 mm Plasma Cutting Machine 260 A Machine is in good condition

Ajan 16000 mm x 3000 mm CNC Plasma and Oxygen Cutting Machine 260 Amper Machine is in good working condition

Vertical tank, with agitator of 400lts of capacity, calorifuged and with heating/cooling of half shank. Made of stainless steel 316L, on legs.

AJAX Surface Grinder 18″ x 10″ capacity Max height under the wheel is 15” Magnetic chuck Dust extraction Metric calibration Machine in very good condition Machine weight: 1 tons Machine Dimensions: 5′ x 4′ x 6�

Industrias AJA double jacked s/s tank with agitator, volume: 400 liter, dimensions: Ø 800 mm x 2200 mm.

The AJAN SHP 260 A plasma cutter was built in 2010 in Turkey. The machine is in continuous operation. I am selling due to upgrading to a newer model. Characteristics of the AJAN SHP 260 A plasma cutter - cut materials: structural steel, stainless steel, aluminum - maximum cutting speed: 15 m/min - maximum sheet size (length x width): 6 x 2 m - minimum cutting thickness (structural steel): 0.5 mm - maximum cutting thickness (structural steel): 60 mm - minimum cutting thickness (stainless steel): 0.8 mm - maximum cutting thickness (stainless steel): 20 mm - minimum cutting thickness (aluminum): 1.2 mm - maximum cutting thickness (aluminum): 25 mm - total power requirement: 52 kW - power of the plasma source: 260 A Equipment of the SHP260l plasma burner - CAD/CAM software: AJANCAD, Lantek Pulsar - machine plasma source: AJAN PP 260 A - autopsy and extraction table with ...

Ajan oxygen and plasma cutting machine 3000 mm x 18000 mm Power : 4 KW Machine is in excellent condition

Ajan PP 260 A CNC Plasma and Oxygen Cutting Machine 260 Amper Cutting length : 1500 mm X 6000 mm 4 Kw Ducting fan : 5.5 Kw and 6000 M3/H, year : 2012 Generator PP260A 52KW,year : 2012 Pipes have been changed recently All maintenance has been recently serviced by Ajan service

Ajan PP 260A CNC Plasma/oxygen cutting and pipe cutting machine 14000 mm x 3000 mm 260 Amper Machine is in good condition

Ajan PP 130 A CNC Plasma Cutting Machine 130 Amper Table size : 1500 mm x 3000 mm Air system Machine is in very good condition It has been worked 18 months, total working hour is 706 (April 2022) Maximum cutting thickness : 30 mm

Specifications: Maximum cutting length: 3100 mm Maximum thickness in steel: 6 mm Maximum thickness in stainless steel: 4mm Rear cutting movement: 800 mm motorized stop Manual handwheel for exact approximation Regulation of the separation of the blades Digital display stop position piece counter adjustable cutting length cut line light Automatic stop of the pump motor Front support console and sheet metal bracket

Ajan 3x12 meter plasma and oxygen cutting machine 11 KW + 8 bar compressor and dryer is included in the offer(Brand : Tamsan) Machine is in good condition

Electronic module, control unit with operator panel board and operation board MITSUBISHI Operator panel board: BN624A926G52 Operation board: KS-YZ402B-2 BN330B152 Power supply: NEMIC-LAMBDA LWT-3B/01 Input: 85 - 250 V 1AC 42 W Output: +5,0 V DC 3.0 A / +12 V DC 0.4 A / -12 V DC 0.4 A spare part for machining center MAZAK AJV25/405 ! used, tested ! Dimensions: 365 x 185 x 65 mm

Filter MAZAK AJV25/405 Serial 9J used, tested ! Dimensions: 270 x 265 x 110 mm

Screw hook, 2 pieces MAZAK AJV25/405 Load capacity: approx. 10 t per piece Hook cross-section: 62 x 47 mm Base plate : 175 x 155 x 40 mm 8x screw M24 x 3.0 thread length: 65 mm spare part for machining center MAZAK AJV25/405 !, among others weight approx. 35 kg used, tested ! Dimensions ( one hook ): 330 x 155 x 200 mm

Slip-on cutter, face cutter, corner cutter, milling head MITSUBISHI AJX12-052A04R diameter: 52 mm Number of cutting edges: 4 diameter base body : 50 mm height: 50 mm diameter (bore): 22 mm New ! Dimensions ( cutter ): Ø 52 x 50 mm

Filter MAZAK AJV25/405 connections ( filter housing ): G 2 Installation length ( filter housing ): 160 mm capacity ( filter housing ): approx. 2.4 l used, tested ! Dimensions ( filter housing ): 350 x 160 x 135 mm dimensions ( assembly ): 400 x 400 x 140 mm

two-pedal footswitch with protective cover MAZAK AJV25/405 two NC and NO contacts per pedal approx. 2.5 m connection cable with protective sleeve used, tested ! dimensions: 300 x 250 x 140 mm

Attachment pocket filter with 12 m2 filter area (12 pockets, 500 mm x 1,100 mm each), 1.5 kW fan (1,500 m3/h) and jet cleaning, flange dimensions: 1,230 mm x 630 mm. Multiple identical units available.

Pocket filter with 12 m² filtering surface (12 pockets, each 500 mm x 1.100 mm), 1,5 kW blower (1.500 m³/h) and jet cleaning unit, flange dimensions: 1.230 mm x 630 mm.

Workpiece holder 40 pieces, video available

x-travel: 6200 mm y-travel: 1500 mm z-travel: 508 mm Control: Mazatrol type: M 32 workpiece height: 708 mm Tool changer: 60 spindle taper ISO: 50 table surface area: 6200x750 mm total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working height 11 m, working range 6.8 m, load capacity 230 kg, 350° swivel radius, with additional knuckle boom on the work basket 180°, jib vertical working range 144°, total width 122 cm, transport height 201 cm, transport length 574 cm, machine weight 7100 kg

x-travel: 3200 mm y-travel: 1400 mm z-travel: 508 mm table surface area: 3000x1250 mm column daylight: 1500 mm turning speeds: 35-5000 U/min spindle taper ISO: 50 control: Mazatron M Plus Table load: 5000 kg Tool changer: 30 chip conveyor: The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 3505 Type: AJV-25/404 Producer: MAZAK Generated: Parameters: Control system: MAZATROL M-32 Work table length: 1240 mm Work table width: 550 mm Maximum table load (even): 800 kg Spindle drive power: 15 kW Minimum vertical spindle speed: 28 1/min Maximum vertical spindle speed: 4000 1/min Mechanical feed length axis X: 1000 mm Mechanical feed length axis Y: 508 mm Mechanical feed length axis Z: 460 mm Cone: ISO 40 Number of tools: 30 pieces Maximum tool diameter: 100 - 150 mm Max. tool weight: 8 kg Distance between uprights: 650 mm Accuracy: 0.02 mm Machine height: 3026 mm Machine length: 3810 mm Machine width: 2590 mm Machine weight: 8.1 t

Description: SPECIFICATIONS Character: Mazak Type: AJV-25/405 Serial number: 78999 Order: Mazatrol M 32 Table dimension: 1240 x 550 mm Top spindle name: CAT 50 Tool changer: 60 positions Maximum speed: 5,000 rpm Clamping conveyor weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 4,500 x 3,100 mm

pressure:200 t table length:2500 mm table width:2000 mm stroke max.:2050 mm dimensions:ca. 9200 x 4700 x 5800 mm draw back pressure:25 t Approx. weight (w/o operational materials):50 t column diameter:210 mm table speed:25 mm/sec table extendable:2000 mm table speed:30 mm/sec table load:15 t power capacity:20 kW work speed:1 - 10 mm/sec. pre-running speed:10 mm/sec :25 mm/sec :10 mm/sec. Oil Tank Capacity:400 l Oil cooling (electric):1,5 kW (max) Podestal height:650 mm Table Height:800 mm Ram Height:850 mm Control System by Siemens:S7 1200 Monitor:WEG 12 Zoll :10200 ? Maintenance Balcony:5000 ? :4.000,-- ? :1.000,-- ? :18000 ? :1.500,-- ? :12000 ? Upper Tool Folding:170 Grad Swivel table:75 Grad Table tiltable:75 Grad Ajecters with 60T in the pestle centre:12000 ? Blessed plate folding by 180 degrees:14000 ?

ZINCALUM LINE FATA PRODUCTION MACHINERY Manufacturer: FATA PRODUCTION MACHINERY YOM: 1990 Main Equipment: 2 Uncoilers Entry lap welder (Taylor Winfield) 6 Strands Horizontal Entry Accumulator Horizontal Annealing Furnace (Non Ox Heating Section – Radiant Tube Soaking Section: 1 Jet Cooling –Sow Down Cooling Section, Down Chute with electrical heaters AJAX Pre-melt Pot (7 MT) – heated by Two 300 KW channel type inductors AJAX Coating Pot (60 MT) - heated by Four 300 KW channel type inductors. 3roll type Rig. KHOLER Air knives Coating thickness measuring (DMC) 6 Hi Leveller Chemical treatment (Inmersion Tank) Oiler Flying Shear 2 Tension Reels with edge control Strip width range 610 – 1220 mm Strip thickness range 0.30 – 0.85 mm Coil weight entry zone Max 18 MT Coil weight delivery zone Max 9 MT Maximum speed 120 m/min ZNAL  ...

Sägeblatt-Ø: 315 mm cutting diameter: 90 mm sawblade width: 2,5 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: flat: 120 x 70 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: flat: 80 x 70 mm turning speeds: 52 -104 U/min voltage: 400 V frequency: 50 Hz power capacity: 1,32 -1,9 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.