136,283 used machines on RESALE, but how to find them? Machine Search
ATLAS COPCO GA 5 FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 5 FF Machine type: Screw compressor with integrated air dryer and air receiver Year of manufacture: 2003 Operating hours: approx. 38000 h Condition: Serviced by Atlas Copco Service history: Available Technical details: Rated power: 5.5 kW Working pressure: 8.5 bar Dimensions: Approx. 1200 x 800 x 2100 mm (including packaging) Description: Industrial screw compressor Atlas Copco GA 5 FF equipped with integrated air dryer and air receiver. Designed for reliable compressed air supply in workshop and industrial environments, offering efficient operation and compact design. Auction-ID: A7-49489-4
Used Teka LMD 508 & Inova Air E300, Hepa air filter installation in pallet crate Auction-ID: A1-48529-97
for cleanroom and process air Auction-ID: A1-49000-53
Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.
used
Material: steel Engine 11 kW Very good condition. You can also get the entire system with all components.
Air-cooled liquefaction kit Bitzer without compressor,Type LH135/F302H, New, Base plate with condenser and collector
Air pressure-done piston pump aerial entrance pressure max. 8 cash Max Materialvolumenstrom Materialvolumenstrom materialvolumenstrom 4.5 l / min. translation 30:1 224 cash material temperature max. 90°C high-grade steel execution (changes and mistakes in the technical data, information and prices as well as intersales reserve!)
Blacksmith hammer / air hammer Zeva machines 16 bear Air / forging hammer 16 bear Max 250 strokes/min Working cylinder diameter 90 mm Stroke approx. 170 mm CLOUT approx. 16 bear Anvil is connected to machine Ambosswerzeug can be changed CLOUT and Geschwindegkeit can be controlled with foot switch and hand 1.5 KW, 250 kg If you are interested in air hammers with 25Baer, 40Baer, 55Baer and 75Baer write me a short message!
Stationary air compressor Lutos DI 70-4 Oil-free Efficiency 3100 rpm 90 kW Weight 410 kg Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl
Attachment: Schneider air compressor Compressor: UNM STV 460-10-200 t no.: T800-140 Suction power: 460 l / min EFF. Quantity: 375 l / min Final compression pressure: 10 bar Rated motor power: 3 kW Voltage: 400 v Frequency: 50 Hz Year of construction: 2008 Condition: mint condition - very good
RECON Part number: 1203-1208 / 1213 6626 / 1230 6642 / 1213 6625 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Biological exhaust air purifier for odour removal, exhaust air treatment, bio-air purifiers, biofilters, air scrubbers used The exhaust air filter can be used for odour disposal in wastewater treatment, waste management, oil mills and malthouses, biogas plants, landfill degassing, carcass recycling plants and slaughterhouses. The exhaust air is first passed through an air scrubber / humidifier and then through the biofilter material. There, the unened odours are neutralized. Manufacturer S&H GmbH & Co. Umweltengineering KG Year of construction probably 2006 Dimensions: approx. 10.5 m x 10.5 m + 2.5 x 5 m Surface filter 9 x 9 m (internal dimension) Filter material: 149 m3 biomix and 24 m3 oak wood Bulk height 2.14 m The side walls are made of PE panels with support made of galvanized steel. The filter was installed in a biogas plant. We also have other components of the s ...
Dynamic airflow separator (sifter) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel occupied with 64 blades / turbine blades, outer ring occupied with 36 manually adjustable counter wings, incl. drive. In very good condition.
RECON Part number: 1203-1212 / 1213 6618 / 1230 6640 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.
used
All prices are from Station Germany. All follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are owner, manufacturer or operator information and therefore non-binding for us. Customer protection is agreed between the parties. Place of jurisdiction Germany. All agreements are made in accordance with German law. Customer protection agreed after ICC Paris Intermediate sale, other use, exploitation and error are expressly reserved.
Cover for charge air cooler MWM 620 RECON Part number: 1214 1951 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Air heater Manufacturer: GEA Happel Klimatechnik GmbH Type: MAXX M311D. BA3. X ATYPE Year of construction: 2004 Technical data: Rated voltage: 3 x 400 / 50 V/Hz Nominal power: 0.30/0.17/0.12 A Protection class: IP54
Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.
RECON Part number: 0405 2476 / 0400 6154 Complete with air start valve Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Original MTU Charge air radiator cooler for MTU diesel engine type 16V2000G26F (3B)
High-quality airpad machine from a reputable manufacturer. Suitable for the production of individually defined air-filled protective and filling elements made of PA and PE film. Usually, four air cushions are created per work cycle. Different formats can be produced. For this purpose, 10 programs are available for storing several parameters. By calling up the corresponding program in the display, air cushions from 4 cm to 16 cm in length and individually defined filling levels can be produced. The resulting air cushion membranes are wound into rolls by means of a motorized device. When the roll is full, the machine automatically shuts down. Then the finished roll can be removed manually and then used as packaging material. The machine can be pushed over rollers and fixed by brakes. The machine can be demonstrated under electricity.
RECON Part number: 0215 4064 / 0400 5112 / 0400 3113 Air start ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Air duct MWM 12307524 Original - Price per air duct! - Suitable for MWM TCG 2020 - TBD 620 - TBG 620 - AIR GUIDANCE CONDUITE D'AIR CONDUCTO DE AIRE The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proj ...
Air duct MWM 12307522 Original - Price per air duct! - Suitable for MWM TCG 2020 - TBD 620 - TBG 620 - AIR GUIDANCE CONDUITE D'AIR CONDUCTO DE AIRE The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proj ...
- Air guide housing air duct housing MWM 12141695 - Suitable for several motors - Please note! Price per piece! - 12141695 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapti ...
Original Charge air radiator cooler for MTU diesel engine type 16V2000G25 (3B)
Abegg to fan and the fan with fans Ziehl. noch nie benutzt NEW
- Air guidance air duct MWM 12136627 - Suitable for several motors - Please note! Price per piece! - References -> 12131031 – 12136628 – 12306646 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new pro ...
- Air guidance air duct MWM 12131039 - Suitable for several motors - Please note! Price per piece! - References -> 12131070 – 12350043 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By cons ...
- Intake manifold air intake pipe MWM 12452139 - Suitable for several motors - Please note! Price per piece! - References -> 12452137 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constant ...
RLA 160 Extraction system Dust nozzle diameter: 160 mm Engine: 2.2 kW 400 V 50 Hz Nominal volume flow at the nozzle: 1448 m ³/h Maximum flow rate: 2400 m3/h Filter surface: 9,21 m² Dust class M Residual dust content: H3 Chip collecting volume: 2 x 165 (193) l The maximum sound pressure level: 73 dB (A) Dimensions (L x W xH): 1755 x 830 x 1654 mm Weight: 267 kg G & pieces 5131620
- Intake manifold air intake manifold MWM 12136619 - Suitable for several motors - Please note! Price per piece! - References -> 12136620 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By cons ...
Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 months Volume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use
- Air cleaner fastening MWM 12300402 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new tech ...
Specifications General Drain spout G 3⁄4 inches Fin spacing 7.0 mm Type GDF030.1C/17-AN150 Electrical data Power consumption Fan 0.28 A Supply voltage Fan 230-1-50 V/Ph/Hz Flats Surface 8.8 m² Weight Net weight 16.3 kg Performance data Rated power 1.8 kW Temperature difference = 8 °K , evaporation temperature = -8 °C 1.5 kW Temperature difference=7 °K, evaporation temperature=-25 °C Pipe connections Withdrawal Diameter 18 mm Admission Diameter 16 mm Sound data Noise level 43 dB(A) Fan data Achievement 35 W Air flow 1100 m³/h Number of fans 1x 300 pcs. Thermal Contact internal Fan speed 1200 min-1 Throwing distance 7 m Volume Pipe content 3.4 l
Supply air heating system, NW250, 400V, 9KW, KMS, mint condition -80% Special price ! The current new price of a similar product is more than € 8,000 excluding VAT. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Top condition like a demonstration unit! The part was removed from a new machine that has demonstrably only run for approx. 100 operating hours. Technical data: - Supply air heater 9 KW - Heating cartridge with heating cross 400V 3x3000W - Incl. pipework, complete design in stainless steel + pipe insulation - Incl. corrugated flex sleeves - Stainless steel intermediate non-return valve AWS ZRK-VA-VA-200-F - Assembled incl. stainless steel mounting bracket - Price is without HEPA filter and Ex centrifugal fan, we are happy to offer - Parts list and drawing from KMS - Inlet side NW250 - Outlet side NW250 reduce ...
MECHANIC SYSTEM GM6VW industrial air filtration system was built in 2014 in Poland by Mechanic System Sp. z o.o. The machine is used in air filtration from dry impurities generated during various technological processes. Thanks to the use of patron filters with a large filtration area, the machine achieves an efficiency of up to 99.999% in class M, enabling recirculation of cleaned air back to the production hall. Dust accumulated on the surface of the patron filters is cleaned automatically by pulses of compressed air during machine operation. Moreover, the vertical positioning of the filters increases their vitality and significantly reduces operating costs. The MECHANIC SYSTEM GM 6VW dust collector has a fan installed directly on the filter chamber and is offered together with a controller and existing piping. Technical specifications of the MECHANIC SYSTEM GM6VW dust extraction un ...
Manufacturer: Kremlin, Type: 16-120, Compressed air bar max: 96, Transmission ratio: 16:1, Conveying output l/min: 6, Max compressed air bar: 6, FREE TEXT: geprüft,
Manufacturer: Kremlin, Type: 2050, Transmission ratio: 16 : 1, Compressed air bar max: 96, Förderleistung l/min: 6, Druckluft max bar: 8,
Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation
KRONES Air conveyors used- in very good condition Price: Euro 475,-- / per meter Complete with cable, stand, motor
maximum number of results exceeded
please refine your search
1.200 € 
.jpg)
.jpg)
