agrometal used for sale

Wire stitching machine Agrafix BX; good condition; cleaned and tested; Stitching thickness 25mm with the clamp folded down, 40mm with the clamp not folded; block or saddle stitching; Clamp width 14mm; suitable for round or flat wire. Wire stitcher Agrafix BX; good condition; cleaned and checked; max.stitching thikness by clinched staple 25mm, 40mm by stabbed from both sides; flat or saddle stitching; crown width 14mm; used for round of flat wire.

Ref. 499 Stitching machine Agrafix BX Ma No. 17007 Condition: Used machine / Cleaned and checked / Functional Ref. 499 Stitching machine Agrafix BX Serial 17007 Condition: Used machine / Cleaned and checked / Good working condition

Key data: 2 , 10

New AGRE Alup screw compressor with filter unit (technically oil-free), for the operation of milking robots. IMMEDIATELY AVAILABLE from the Hengsberg warehouse in Styria! We are also happy to take care of the delivery and commissioning of the compressor and ongoing maintenance of existing compressors of the brands AGRE, Alup and Atlas Copco. Drive: Efficient IE3 motor with belt drive Control: Infologic² Connect Refrigeration dryer and 270 litre container integrated Includes filtration for technically oil-free operation Performance data Volume flow at operating pressure 9.5 bar: 0.29 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 3.7 kW Rated power motor: 2.2 kW Pressure dew point refrigeration dryer : approx. +3 °C Dimensions and weight Length x width x height 1540 x 600 x 1350 mm Weight 205 kg Compressed a ...

For sale: Used parts from spindle mower Agria 9300, also dieselengine Kubota V 1200 Other parts of / for reel mowers available to some types of Jacobsen, Ransomes and Sabo. Also complete spindle mower units, cutting moves, pull mowers, self-propelled mower. - JODAU environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Refrigerant filling and service system Manufacturer: Agramkow Type: RHS 1280 year of construction: 2010

different Stapling and stitching machines Agrafix - Hohner - Berhmer - Grapha, in good condition, available immediately

Reducer Concentric AGRU/TRACEABILITY 250/160 SDR 1

Elbow 45° AGRU 250 SDR 17

Reducer Concentric AGRU/TRACEABILITY 90/75 SDR17

Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.

Wire Stitching Machine AGRAFIX BX 1-head wire stitcher for block- and saddle stapling. Year 1992 - Serial-No. 190121 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Reference Num.: 3690 Brand: AGRAFIX Type: SB Stitching Machine Available: directly Status: In production Location: Deutschland Equipment: - Heftmaschnie

One head stitcher AGRAFIX - heavy duty in production ready condition. Can ship worldwide.

1-stitching head machine AGRAFIX BX Saddle stitching (swivel table) Stapling thickness 1 sheet up to 25 mm with backwards folded staples Grooving (stitching) up to 40 mm thick Clamp width 14mm Round Wire No. 30-21 + Flat Wire No. 0-V Projection 320 mm Stapling table 610 x 200 mm Dimensions W65 x D70 x H160cm Packaging dimensions W80 x D90 x H180cm, 240/300kg Drive 220/380 Volt, 50Hz, 1/3 HP

Used manual batch ultrafiltration line for cottage cheese made by Agros Milko-Polska. Capacity: 2.500 kg of finished product in 8 hours, concentrated to 72% dry matter. New: 1996

Used vegetable washer made by Maquinaria Agricola E Industrial, model: LAVSIM-D4X12. Capacity 6 tones / hour for beetroot. Length: 3 m

Inv. Num. : 8808 Type: MS-1.2 Producer: Agropart Created: 2025 Parameters: Volume: 1700 m3 Power: 2400 kg/h Equipment: Large Pocket Tower Fan

Reference Num.: 4239 Brand: AGRAFIX Type: SB Stitching Machine Construction year: 1992 Available: directly Status: Not in production Location: Deutschland

Hi, I offer you Hydraulic power pack-three engines 90 KW each -oil tank 4500l, -Each engine drives two hydraulic pump gear -Pump Model 45V60A Power supply power to the extruder scrap shears in the set are three Dimensions chydrauliczne 160x190 coolers coolers 3 x -cooling connection 100 mm -power connection 80 mm Very Good Condition Net price: 59900 $-€14000 contact: + 48 600-517-834

New laboratory extruder 25/25 LD Extruder Motor - AC Motor 2.2kW Water bath - 1000 mmm Granulator for a strand

Single-screw extruder • Type: 120/28 LD • AC Motor - 75 kw • Screw speed: 150 rpm. • Extruder cylinder: Air-cooled • Degassing zone Sieb changer • Strandhead Water bath: 4.5 m Granulator SG 200 Classic sieve Silo with conveyor fans: approx. 1m3

- 1 head stitiching machine - with the existing accessories

Key data: 2 , 10

m

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor with belt drive Control: fixed speed Control: Airlogic² T touchscreen full-color display Refrigeration Dryer: Integrated Performance data Volume flow at operating pressure 9.5 bar 1.15 m³/min Operating pressure min. / max. 5.5 / 10 bar Total power consumption at 9.5 bar / full load 10.0 kW Rated power motor; IP55 7.5 kW Oil quantity 3.7 lt Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1188 m³/h Free fan pressure 30 Pa Sound level 65 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Dimensions and weight Length x width x height 1625 x 665 x 1535 mm Weight 355 kg Compressed air outlet G 3/4 "ig Capacity compressed air tank 270 lt

Key data: 4 , 8

Oil-free scroll compressor Compaction: Spiral compactor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Simple start/stop control Refrigeration Dryer: Integrated, Refrigerant R513A Electric condensate drain included Performance data Volume flow at operating pressure 6.75 bar 0.4 m³/min Operating pressure min. / max. 4.0 / 7.75 bar Total power consumption at 6.75 bar / full load 4.4 kW Rated power motor; IP55 3.7 kW Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 0 / 40 °C ∆ T above cooling medium temperature 0 °C Cooling air requirement 900 m³/h Free fan pressure 30 Pa Sound level 57 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer internally wired Dimensions and weight Length x width x height 1,275 x 690 x 1,450 mm Weigh ...

Environmental protection. Improved separation. Also separates stable emulsions. Meets the strictest purity requirements. Highly efficient. Equipment in detail Maintenance indicator Easy maintenance Filtration Polypropylene for free oil particles Activated carbon for unstable emulsions Organoton for stable emulsions Efficiency with activated carbon Max. oil content at outlet 10mg/l Efficiency with Organoton Max. oil content at outlet 5mg/l Technical data Max. compressed air output (medium climate) without dryer & filter 6.3 m³/min Max. compressed air output (medium climate) with dryer & filter 3 m³/min Condensation Tube 2 x 1/2" Water drain 2 x 1/2 " Condensate inlet temperature min. / max. 0 / 60 °C Dimensions and weight Length x width x height 390 x 278 x 428 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Curb weight approx. 5.8. kg ...

Maximum removal of impurities. Increased quality of the final product. Extended service life of the operating process. High reliability. Low pressure loss. Service-friendly. Tested according to applicable ISO standards. Filter package Replace filter G85 1/2" residual oil 0.3 mg/m³ after 2000 hours Replace filter C85 1/2" residual oil 0.01 mg/m³ after 2000 hours Replace filter V85 1/2" residual oil 0.003 mg/m³ after 1000 hours Residual oil after filter package 0.003 mg/m³ = technically oil-free + Wall bracket + Connection kit Filter G Equipment in detail Drain: Automatic float drain valve Performance data Nominal capacity 1.42 m³/min Application: Oil Aerosol Oil aerosol concentration in the outlet 0.3 mg/m³ Total mass efficiency >99.25 % Quality class of air at the outlet (oil) 3 according to ISO 8573-1:2010 Pressure loss dry 55 mbar Pressure loss wet 125 m ...

Compact cascade extruder - 1x extruder with 80 mm screw diameter - 1x extruder with 70 mm screw diameter - Vacuum degassing or atmospheric - Control cabinet / control for both extruders - Extrusion nozzle

Compounding - granulation line, consisting of: Extruder twin screw synchronization, drive 31 kW Segment screws and barrels, water-cooled Screws 2x Ø 35 mm – 44 L/D 1x degassing zone (atmospheric) 1x degassing zone (vacuum) 1x side dosage Screen changer double piston type K-SWE 101 with hydraulics Switchboard Water bath, granulator, etc. optionally also available on request.

for 25 hp tractors ,normal PTO 540 rpm ,instruction manual , replacement catalog ,

Year of manufacture 1987 Wire Stitching Machine 2 stitching heads Saddle and block stitching electr. Foot switch Delivery date: immediately Price on request. We supply and install worldwide.

Wire stapling machine with 2 stapling heads for 0-25mm stapling

Key data: 1 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 6 liter container (painted) Performance data Volume flow 270 l/min Operating pressure max. 10 bar Nominal power motor 1.8 kW Number of cylinders 1 Compressor stage(s) 1 Installation data Ambient conditions min. / max. 2 / 40 °C Sound level 73 dB(A) Voltage / Frequency 230 / 50. V / Hz Dimensions and weight Length x width x height 455 x 475 x 500 mm Weight 24 kg Compressed air outlet coupling Compressed air tank capacity 6 lt

Key data: 4 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: Belt drive Including 270 litre container (painted) Performance data Volume flow 455 l/min Operating pressure max. 10 bar Nominal power motor 4.0 kW Number of cylinders 2 Compressor stage(s) 2 Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 70 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1520 x 590 x 1260 mm Weight 180 kg Compressed air outlet coupling Capacity compressed air tank 270 lt

Key data: 3 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 90 liter container (painted) Performance data Volume flow 330 l/min Operating pressure max. 10 bar Nominal power motor 3.0 kW Number of cylinders 2 Compressor stage(s) 1 Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1065 x 615 x 1000 mm Weight 89 kg Compressed air outlet coupling Capacity compressed air tank 90 lt

Key data: 4 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 270 litre container (painted) Performance data Volume flow 504 l/min Operating pressure max. 10 bar Nominal power motor 4.0 kW Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1940 x 820 x 1600 mm Weight 150 kg Compressed air outlet coupling Capacity compressed air tank 270 lt

Key data: 5 , 10

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: Speed-controlled with frequency converter Control: Infologic² Connect Refrigeration Dryer: Integrated Filtration optionally available Performance data Volume flow at operating pressure 7.0 bar 0.33 - 0.75 m³/min Operating pressure min. / max. 4.0 / 10.0 bar Total power consumption at 9.5 bar / full load 7.7 kW Rated power motor; IP55 5.5 kW Oil volume 3.2 lt Pressure dew point refrigeration dryer approx. +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1140 m³/h Free fan pressure 30 Pa Sound level 61 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.19 kW Dimensions and weight Length x width x height 1540 x 600 x 1375 mm Weight 230 kg Compressed air outlet 1/2 "  ...

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width ...

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dr ...

Cooling: air-cooled Control: Hot Gas Valve Control: Digital display Condensate separation: lossless, Level-controlled steam trap Performance data Nominal capacity at pressure dew point +3°C 0.6 m³/min Max. operating pressure 16 bar Total energy consumption (25°C input temperature) 0.16 kW Refrigerant R513A 0.17 kg Installation data Ambient conditions min. / max. 5 / 43 °C Pressure drop at full load 0.25 bar Voltage / Frequency 230 / 50 V / Hz Dimensions and weight Length x width x height 350 x 493 x 450 mm Weight 19 kg Compressed air connection G 3/4 "ag

Galvanized compressed air tank Material: Hot-dip galvanized steel Version: upright Fittings: Safety valve, pressure gauge, Ball valve, test valve Installation data Capacity compressed air tank 270 lt Permissible operating pressure max. 11 bar Operating temperature min. / max. -10 / +80 °C Blow-off capacity safety valve 7.24 m³/min Dimensions and weight Diameter 500 mm Height incl. feet 1685 mm Weight approx. 66 kg Compressed air connection 4 x 3/4 "

Steam traps without pressure losses! In the production of of compressed air, water always falls into the form of of condensate. If this condensate is not reliably separated, the condensate can in the compressed air network and damage to the consumers. Performance data Application for compressors up to 6.3 m³/min Application for filters up to 63 m³/min Operating pressure min. / max. 0.2 / 16 bar Capacity discharge 3 l/h Installation data Operating voltage (without el. Connection cable) 230 V Power consumption 10 W IP65 protection class Dimensions and weight Length x width x height 160 x 69 x 116 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Weight approx. 0.9 kg

Speed-controlled screw compressor 5.5 Kw FU Motor speed 2000-4000 rpm Pressure 5-13 bar Volume flow 0.39-0.95 m³/h Length 87 cm Width 60 cm Height 100 cm

For Sale Commercial Operation trade with cars, trucks, agriculture and building machines in Bosnia-Herzegovina -outside EU- - all other business possible - The company in Bosnia Herzegovina is an independent Doo, established in 1999. The main business is trade with all kind of new and second hand agricultural and building machines as wheelloaders and diggers , spare parts, cars and workshop for service. The statute of the Doo allows much more business and can be changed for all kind of other business. In that area all kind of business is possible and allowed, also production, distribution, and so on - as it is industrial area. Part of this DOO is a real estate with 3000 qm paved area, with strong fence all around. Building is new built in 2005 with German Standard - massive,fully damped against cool and warm, central heating. Ground floor there are 2 offices with tea-kitchen, W ...

Wide agricultural tyres starts, drives and does what it's supposed to do Barely used Auction-ID: A3-43534-11432

NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Dieci Agri Farmer intake

NEW, Dieci Agri Farmer adapter suitable for Euro mount, 150 kg dead weight, also available with Dieci 25.6 mount

Agromec TKM 290 R rear mulcher – 2.8 m – year 2013 Robust rear mulcher for agriculture and green space maintenance Large working width for high area performance PTO drive for tractor operation Ideal for grass, scrub and maintenance areas Equipment: Y-knife (visibly installed) Wheels/Training Wheels Three-point hitch (rear mounting) PTO shaft available Protective flaps / housings Technology: Working width: approx. 2,800 mm Weight: approx. 1,080 kg PTO: 1,000 rpm Robust design for continuous operation Condition: Used Common signs of wear and rust Wear on knives visible Function not checked (auction) Auction-ID: A7-46606-1550