AGFA Avalon N4-30 (Screen PT-R 4600 S) year 2016 32 diodes 21 plates/h exposure time 23,920 h Running time 35,300 h plate loader without RIP plate processor Glunz&Jensen Quartz III 85 year 2012
Agfa Elantrix ST 125 SX Pressure Plate Stacker; cleaned and tested; Panel width 300-1250mm; Panel length 275-1470mm; Panel speed 400-2500mm/min.; Printing plate trolley. Plate stacker Agfa Elantrix ST 125 SX; cleaned and checked; plate width 300-1250mm; plate lenght 275-1470mm; plate speed 400-2500mm/min.; plate trolley.
Agfa Elantrix 125 SX Plate Developing Machine; cleaned and tested; incl. Scrub Kit; suitable for thermal plates; max. Panel width 1250mm, min.200mm; min. Panel length 300mm; Plate thickness 0.15-0.40; Cooling. Plate processor Agfa Elantrix 125 SX; cleaned and checked; included scrub kit; used for thermal plates; max.plate width 1250mm, min.200mm; min. plate lenght 300mm; plate thikness 0.15-0.40mm; Chiller.
AGFA Acento E (Screen 4100 E) year 2006 16 diodes plate winding cycles 66.600 exposure time 5,800 h PC with ApogeeX good condition
Agfa Avalon N4-30 PT-R4600E, Year 2018 only approx.16K plates done Apogee Workflow RIP Inline punch Stacker ST 95EX Azura C95 Clean out unit Etc. Available: at short term
Brush kit and rollers Agfa Elantrix 95 SX; used. Brush Kit and rollers for Agfa Elantrix 95 SX; condition used.
FLATBED UV LARGE FORMAT PRINTER M. No.: 2525797057901 • CMYK + Lc Lm + 2 x White • White in the pre- and postprint • Speeds up to 45 m²/hr. (500 ft²/hr) • Max. print size 2,54 x 1,54 m • Substrates up to 4,5 cm (1.77 in) thick. • Multiple board printing • Borderless printing • Shuttle safety sensors • For Digital Printers, Poster printers and Mid-Size Graphic Screen Printers
LARGE FORMAT PRINTER AGFA JETI 3324 SL BASE SOLVENT RTR (roll to roll) 6C (PRINTS ON TARP, CLOTH BANNER & VARIOUS MATERIALS) M. No.: 3.324287 • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) • Max. roll weight up to 230 KG • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Original ...
Agfa Azura C 95 washout; cleaned and tested; Working width 200-950mm; Printing plate length 310-1100mm; Printing plate thickness 0.15-0.30mm; Double brush; suitable for chemical-free printing plates. Clean out unit Agfa Azura C 95; cleaned and checked; working width 200-950mm; plate lenght 310-1100mm; plate thikness 0.15-0.30mm; double brush; used for chemistry free plates.
All Rip and Software Included, 2400 dpi, Formats: Min. 324x660mm, Max. 370x830mm, PST 26 Compact Stacking Delivery, 16 Diods Laserhead, Infrarot 830nm thermal, chemical free thermal CTP with Autofeeding
AGFA Imaging Plate System / CR System CR 30-X (for Veterinarian) Primary processing station 3 CR cassettes • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized b ...
AGFA ADAMAS 125 COU ( Clean out unit ) Washer for Adamas printing plates. Excellent condition, little used. online version without tables. Stock! AGFA ADAMAS 125 COU ( Clean out unit ) washer for Adamas processing. Excellent condition, was very rare in use. Online version without infeed and outlet. Processor is on stock and can be inspected on appointment.
washout Agfa Azura C 95; good condition; cleaned and tested; new infeed and medium rollers incl. Bearing; suitable for chemical-free negative plate Agfa Azura; Infeed width 200-950mm; Min. Panel length 310mm; Panel thickness 0.15-0.30mm; Inlet and outlet table. Cleaning unit Agfa Azura C 95; good condition; cleaned and checked; new infeed and middle rollers incl.bearings; used for chemfree negativ plate Agfa Azura; Einfeed width 200-950mm; Min. plate lenght 310mm; plate thikness 0,15-0,30mm; infeed aand outfeed table.
AGFA Storage Film System (CR) CR 85-X (mammogenic) with: First Processing Station 6 AGFA CR MM 3.0 Mammo cassettes: 18x24 - 2 pcs./ 24x30 - 4 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
AGFA Soeicherfoliensystem (CR System) ADC Solo MUSICA Computer TFT LCD Monitor Model No. B18XA_Bj. 2001 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
AGFA CR System CR 85-X: First Processing Station (Workstation) AGFA CR MD4.0 General cassettes and ADCC HR Kassetten_ different sizes 18x24, 24x30, 35x43 (11 pieces)
AGFA ADC Compact with: Readout unit/ID tablet Workstation complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.
Agfa Aphis Board for new PCI. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Still in operation: No Available: Yes
Agfa Aphis Board for new PCI. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Still in operation: No Available: Ja
Spinner for Agfa Avantra 25,20,000 RPM, refrushed 2011, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Available: Yes
Spinner für Agfa Avantra 30 ,30.000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Available: Ja
Spinner for Agfa Avantra 30 ,30,000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Available: Yes
Spinner für Agfa Avantra 30 ,30.000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Available: Ja
Spinner for Agfa Avantra 44S ,20,000 RPM, refurbihed 2013, with warranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us.
<br>Spinner for Agfa Avantra 44s, 20,000 RPM, refurbihed 2013, with warranty. We have all spareparts for Agfa Avantra 25/30/44, AccuSet... on stock. Don't hasitate to contact US.<br><br><br>
<br>AGFA Avantra 30 with short developers in excellent condition. Total size: 1200, 1800, 2400 and 3600 dpi - max. screen: 75.4 x 63.5 cm.<br><br>Verf Gbar: now
AGFA Avantra 30 with short Developer in great condition. Resolution: 1200, 1800, 2400 and 3600 dpi - max. image area: 75,4 x 63,5 cm. Available: now
AGFA AccuSet 800 in great condition with Agfa Viper Rip, Resolution: 1200, 1800 and 2400 dpi - System includes all componentes: Accuset, Supply- & Takeup-Cassette, Apis-Cable, CDs, Software and Dongle. Including Techkon Densitometer for film. Just send us a mail and you will get more info and photos Available: now
AGFA AccuSet 800 with AGFA Viper Rip. System is completely tested and cleaned. Resolutions: 1200, 1800 and 2400 dpi - the system is complete and includes accuset, supply & recording cassette, APIS cable, CD's, software and dongle. Includes Techkon film densitometer. We will be happy to send you further information and pictures. Available now
AGFA Motor for the cutter of SelectSet 5000. Including Belt. Available: now
