We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Agfa Elantrix 125 SX Plate Processor; good condition; cleaned and tested; suitable for thermal slabs; Max. Panel width 1250mm, min.200mm; Min. Panel length 300mm; Plate thickness 0.15-0.40; Cooling; including Elantrix ST 125 SX plate stacker with panel trolley. Plate processor Agfa Elantrix 125 SX; good condition; cleaned and checked; used for thermal plates; max.plate width 1250mm, min.200mm; min. plate lenght 300mm; plate thikness 0.15-0.40mm; with plate stacker Elantrix ST 125 SX and trolley.
used
Printing plate development machine Agfa Elantrix 125 HX; good condition; cleaned and tested; Inlet width max.1250mm, min.200mm; Plate length max.1500mm, min.315mm; Plate thickness 0.15-0.50mm; Cooler. Plate processor Agfa Elantrix 125 HX; good condition; cleaned and checked; max plate width 1250mm, min.200mm; max.plate lenght 1500mm, min.315mm; plate thikness 0.15.0,50mm; cooling unit.
used
Printing plate development machine Agfa Elantrix 95 SX; good condition; cleaned and tested; suitable for thermal plates; Max. Plate width 950mm, min.200mm; Min. Plate length 300mm; Plate thickness 0.15-0.4mm; online version; Cooling unit. Plate processor Agfa Elantrix 95 SX; good condition; cleaned and checked; used for thermal plates; max.plate width 950mm, min.200mm; min plate lenght 300mm; plate thikness 0.15-0.4mm; online version; cooling unit.
used
Thermal Plateprocessor Manufacturer: AGFA Model: Elantrix 125 SX year 2016 (incl. AGFA Amigo KIT) Price: on request
used
Thermal Plateprocessor Manufacturer: AGFA Model: Elantrix 125 SX year 2016 (incl. AGFA Amigo KIT) Price: on request
used
4 up Thermal CTP Manufacturer: Agfa Model: Avalon N4 10S Year: 2012 Platesetter Architecture: external drum Laser technology: 830mm infrared thermal Light source: 32-channel infrared laser diodes Image area: Maximum 830mm x 633mm (front margin 15mm, rear margin 12mm) Resolutions: 1200-2400dpi Plate Sizes: Maximum plate: 830mm x 660mm Minimum plate: 324mm x 370mm (standard) 304mm x 370mm (optional) Thickness: 0.15mm to 0.3mm AGFA ELANTRIX 95SX Processor Plate width min-max: 200x950mm Plate length min: 300mm Plate thickness min-max: 0.15-0.4mm Procesing speed: 10-160cm/min Throughput: 58pl/hr(portrait 745x605mm) 44pl/hr(portrait 1030x790mm) Tank content, developer: 57l Tank content, wash: 40l AGFA ELANTRIX ST95EX PLATE STACKER Price: on request
used
2 Thermal VLF Systems: 1 x AGFA Avalon VLF A xxt year : 2006 5000 paltes with new Laserhead AGFA VLF Platemanager with AGFA Elantrix 150 Onlineprocessorwit transit table to the oven. with Haase oven OG15FU with transit table to gum unit withGum unit RSH with explanation table Price: on request 1x AGFA Avalon VLF A xxt year : 2006 Price: on request
used
Thermal CTP Agfa Xcalibur E Year: 2004 in production with Transporttable Transfer table Processor Agfa Elantrix Workflow Apogee V.7.1 Price: on request
used
Complete system installed in 1997 - still in production - Avantra 44S with 3600 dpi - Online Rapiline for Avantra44 - Collecting basket, cable, everything with The whole system was under maintenance contract, is complete tested and cleaned Available: in production
used
<br>AGFA APIS-Board Rev. A5. For AccuSet 800 / 1000 and Avantra 25<br><br><br>br>Verf Gbar: now
used
<br>AGFA APIS-Board Rev. B2. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44-E/S/XT)<br><br><br>br>Verf Gbar: now
used
<br>AGFA APIS-Board Rev. B2. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44-E/S/XT)<br><br><br>br>Verf Gbar: now
used
<br>AGFA APIS-Board UPAC - for old and new PCs (3, 3V and 5V) - for all AccuSets (800/1000/1500 normal & plus), all Avantras (20/25/30/36/44-E/S/XT) and all Galileos (YAG/VS/Thermo)<br><br><br><br>Verf Gbar: now
used
<br>Spinner for Agfa Avantra 44 s - Clompete general&2011 with warranty<br><br>Verf Gbar: now
used
<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now
used
<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now
used
<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now
used
<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now
used
<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now
used
<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Optionc Inkdrive (ZIP3), DQS, and TIFF output are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now
used
<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now
used
<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now
used
<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now
used
<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now
used
AGFA Viper 3.04 Software rip consisting of dongle, CDs (original 3.01 and update 3.04), APIS board and APIS adapter Available now