We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,225 used machines on RESALE, but how to find them? Machine Search
used
CREASING– PERFORATING TOOL FOR ADAST-DOMINANT AD725 PAN ( + VERSION) Available: immediately
used
used
Reference Num.: 3742 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm
used
Reference Num.: 3734 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm
used
Perfection: 1/1, Standard Dampening
used
Standard Accessories
used
Printingmachine - Four Colour Offset press Make Adast Model Dominant 547P Year 1996 Maximum sheet size 381 x 520 mm (in perfecting mode a little less) Dampening Varn Kompac III Feeder stream feeder - up to 12.000 sheets per hour Perfecting 4-0 / 2-2 Delivery low pile delivery Ink bins INKLFOW remote controlled sliced ink ducts Plate change semi automatic Available Direct
used
impressions: - Mio. max. printing speed sheets: 10000 /h max. paper size: 38 x 52 cm serial no.: 8212074 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
impressions: - Mio. max. printing speed sheets: 10000 /h max. paper size: 30,7 x 44,0 cm serial no.: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
impressions: - Mio. max. printing speed sheets: 11000 /h max. paper size: 38,1 x 52 cm serial no.: 52510098 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Schliessrahmen - Letter Press Frame Adast GP Tiegel -1 Frame Adast GP Tiegel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
ADAST DOMINANT 846 P -Year 2001 -Impressions: 42 mil. ( battery changed and started now from zero ) -Perfecting 2+2 or straight 4+0 -Size max: 520x740 mms. -Max speed 12.000 sh/hour -Max paper thickness 0,5 mms. -Alcohol dampening with Technotrans refrigeration -High pile delivery -Table control for all registers -Easy plate change system -Powder sprayer, in production
used
Manufacturer: Maximator GmbH Type: MX 600 Silent 2211.0019 Manufacturing year: 2015 Maximum pressure: 350 bar Rev: 1200 1/min Air delivery: 600 l/min - 36 m³/h Voltage: 400 V Electrical power: 15 kW Weight: ~550 kg Overall dimensions: 1250 x 860 x 2000 mm
used
For sale is a MAXIMART vertical milling center, type RAPIDO 48, year of manufacture 1999 computer FANUC, has only 3,000 working hours, weight 6,900 kilograms,
Mfc.: Fischer & Krecke Type: Maxima 26 Built: 1975 - 1980 Width range: 45 - 260 mm Length: 85 – 650 mm Reel width: 700 mm Equipped with 3 colours units Capacity: 700 bags/min. Very good condition!
used
used
Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!
used
pressure: 320 t chamfer lenght: 3100 mm distance between columns: 2.550 mm column arm: 450 mm ajustment speed: 140 mm/sec working feed: 10 mm/sec return speed: 120 mm/sec work stroke: 370 mm back stop - adjustable: 650 mm table height: 920 mm table width: 150 mm tank capacity: 300 l weight: 13,8 t total power requirement: 30 kW Overall size: 3,99 x 2,7 x 3,28 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 450 mm ajustment speed: 160 mm/sec working feed: 10 mm/sec return speed: 120 mm/sec work stroke: 270 mm back stop - adjustable: 650 mm table height: 850 mm table width: 100 mm tank capacity: 200 l total power requirement: 7,5 kW weight: 7,5 t Overall size: 3,76 x 2,15 x 2,76 m GENERAL SPECIFICATIONS Hydraulic operation with two cylinders – Assistmach High performance hydraulic gear pump – Rexroth High pressure filter (with clogging detector and bypass) placed before all components, Air removal filter in the reservoir Fast descent by gravity, bending phase and return of the ram are controlled electronically via a proportional flow valves h Bending force controlled by proportional pressure valves – Rexroth Quality oil with high viscosity index Frame is designed and sized using Analyze program Hydrau ...
used
pressure: 320 t chamfer lenght: 4100 mm distance between columns: 3550 mm column arm: 450 mm ajustment speed: 140 mm/sec working feed: 10 mm/sec return speed: 100 mm/sec work stroke: 370 mm back stop - adjustable: 650 mm table height: 920 mm table width: 150 mm tank capacity: 300 l weight: 17,0 t total power requirement: 30 kW Overall size: 4,71 x 2,55 x 3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 450 mm ajustment speed: 160 mm/sec working feed: 10 mm/sec return speed: 120 mm/sec work stroke: 270 mm back stop - adjustable: 650 mm table width: 120 mm table height: 920 mm tank capacity: 200 l total power requirement: 15 kW weight: 9,6 t Overall size: 3,76 x 2.25 x 2,92 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 175 t chamfer lenght: 3700 mm distance between columns: 3100 mm column arm: 450 mm ajustment speed: 140 mm/sec working feed: 10 mm/sec return speed: 120 mm/sec work stroke: 270 mm back stop - adjustable: 650 mm table height: 920 mm table width: 120 mm tank capacity: 200 l weight: 11,2 t total power requirement: 15 kW Overall size: 4,35 x 2,69 x 3,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 175 t chamfer lenght: 4100 mm distance between columns: 3550 mm column arm: 450 mm ajustment speed: 140 mm/sec working feed: 10 mm/sec return speed: 120 mm/sec work stroke: 270 mm back stop - adjustable: 650 mm table height: 920 mm table width: 120 mm tank capacity: 200 l weight: 11,6 t total power requirement: 15 kW Overall size: 4,67 x2,25 x 2,92 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 220 t chamfer lenght: 3.100 mm distance between columns: 2.550 mm column arm: 450 mm ajustment speed: 140 mm/sec working feed: 10 mm/sec return speed: 120 mm/sec work stroke: 270 mm back stop - adjustable: 650 mm table height: 920 mm table width: 120 mm tank capacity: 200 l weight: 11 t total power requirement: 18,5 kW Overall size: 3,77 x 2,27 x 2,96 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 400 t chamfer lenght: 6100 mm distance between columns: 5100 mm column arm: 450 mm ajustment speed: 100 mm/sec working feed: 10 mm/sec return speed: 80 mm/sec work stroke: 370 mm back stop - adjustable: 650 mm table height: 1030 mm table width: 150 mm tank capacity: 400 l weight: 30 t total power requirement: 37 kW Overall size: 6,67 x 2,7 x 3,28 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 450 mm ajustment speed: 160 mm/sec working feed: 10 mm/sec return speed: 120 mm/sec work stroke: 270 mm back stop - adjustable: 650 mm table width: 120 mm table height: 850 mm tank capacity: 200 l total power requirement: 11 kW weight: 8,5 t Overall size: 3,76 x 2.15 x 2,76 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 40 t chamfer lenght: 1300 mm distance between columns: 1000 mm column arm: 300 mm ajustment speed: 180 mm/sec working feed: 10 mm/sec return speed: 150 mm/sec work stroke: 180 mm back stop - adjustable: 650 mm total power requirement: 5,5 kW weight: 2,5 t Overall size: 2,12 x 2,0 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 175 t chamfer lenght: 3700 mm distance between columns: 3100 mm column arm: 450 mm ajustment speed: 140 mm/sec working feed: 10 mm/sec return speed: 120 mm/sec work stroke: 270 mm back stop - adjustable: 650 mm table height: 920 mm table width: 120 mm tank capacity: 200 l weight: 12,3 t total power requirement: 18,5 kW Overall size: 4,36 x 2,69 x 3,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 400 t chamfer lenght: 4100 mm distance between columns: 3550 mm column arm: 550 mm ajustment speed: 100 mm/sec working feed: 10 mm/sec return speed: 80 mm/sec work stroke: 370 mm back stop - adjustable: 650 mm table height: 1030 mm table width: 150 mm tank capacity: 400 l weight: 22,0 t total power requirement: 37 kW Overall size: 4,99 x 2,7 x 3,28 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3550 mm column arm: 450 mm ajustment speed: 140 mm/sec working feed: 10 mm/sec return speed: 100 mm/sec work stroke: 270 mm back stop - adjustable: 650 mm table height: 920 mm table width: 120 mm tank capacity: 200 l weight: 19,8 t total power requirement: 18,5 kW Overall size: 4,67 x2,27 x 2,96 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 320 t chamfer lenght: 6100 mm distance between columns: 5100 mm column arm: 450 mm ajustment speed: 100 mm/sec working feed: 10 mm/sec return speed: 100 mm/sec work stroke: 370 mm back stop - adjustable: 650 mm table height: 920 mm table width: 150 mm tank capacity: 300 l weight: 23,5 t total power requirement: 30 kW Overall size: 6,67 x 2,55 x 3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 220 t chamfer lenght: 4600 mm distance between columns: 4050 mm column arm: mm ajustment speed: mm/sec working feed: mm/sec return speed: mm/sec work stroke: mm back stop - adjustable: mm table height: mm table width: mm tank capacity: l weight: t total power requirement: kW Overall size: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 40 t chamfer lenght: 1300 mm distance between columns: 1000 mm column arm: 300 mm ajustment speed: 180 mm/sec working feed: 10 mm/sec return speed: 150 mm/sec work stroke: 180 mm back stop - adjustable: 650 mm total power requirement: 5,5 kW weight: 2,5 t Overall size: 2,12 x 2,0 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 320 t chamfer lenght: 3700 mm distance between columns: 3100 mm column arm: 450 mm ajustment speed: 140 mm/sec working feed: 10 mm/sec return speed: 100 mm/sec work stroke: 370 mm back stop - adjustable: 650 mm table height: 920 mm table width: 120 mm tank capacity: 300 l weight: 14,8 t total power requirement: 30 kW Overall size: 4,36 x 2,69 x 3,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 220 t chamfer lenght: 6100 mm distance between columns: 5100 mm column arm: 450 mm ajustment speed: 120 mm/sec working feed: 10 mm/sec return speed: 100 mm/sec work stroke: 270 mm back stop - adjustable: 650 mm table height: 1050 mm table width: 120 mm tank capacity: 200 l weight: 19,8 t total power requirement: 18,5 kW Overall size: 6,67 x 2,55 x 3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 40 t chamfer lenght: 1300 mm distance between columns: 1000 mm column arm: 300 mm ajustment speed: 180 mm/sec working feed: 10 mm/sec return speed: 150 mm/sec work stroke: 180 mm back stop - adjustable: 650 mm total power requirement: 5,5 kW weight: 2,5 t Overall size: 2,12 x 2,0 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 40 t chamfer lenght: 1300 mm distance between columns: 1000 mm column arm: 300 mm ajustment speed: 180 mm/sec working feed: 10 mm/sec return speed: 150 mm/sec work stroke: 180 mm back stop - adjustable: 650 mm total power requirement: 5,5 kW weight: 2,5 t Overall size: 2,12 x 2,0 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 320 t chamfer lenght: 4600 mm distance between columns: 4050 mm column arm: mm ajustment speed: mm/sec working feed: mm/sec return speed: mm/sec work stroke: mm back stop - adjustable: mm table height: mm table width: mm tank capacity: l weight: t total power requirement: kW Overall size: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 400 t chamfer lenght: 3100 mm distance between columns: 2.550 mm column arm: 550 mm ajustment speed: 100 mm/sec working feed: 10 mm/sec return speed: 100 mm/sec work stroke: 370 mm back stop - adjustable: 650 mm table height: 1030 mm table width: 150 mm tank capacity: 400 l weight: 19,5 t total power requirement: 37 kW Overall size: 3,99 x 2,7 x 3,28 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 175 t chamfer lenght: 4600 mm distance between columns: 4050 mm column arm: mm ajustment speed: mm/sec working feed: mm/sec return speed: mm/sec work stroke: mm back stop - adjustable: mm table height: mm table width: mm tank capacity: l weight: t total power requirement: kW Overall size: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Filler isobaric BC • Model: Maxima RP 16°. • Year: 1982. • Speed: 1500 bph. • Direction: Clockwise. • 16 valves – Isobaric filling: o Degassing o Self-leveling o Pre-evacuation. • Bottle formats: Cl.75 e cl.150. • Safety protections.
used
Screw diameter: 50 mm Displacement volume: 471 cm³ Spray weight in polysterol: 405 g/hp Injection pressure: 2,058 bar Clamping force: 200 t Lights Spar spacing H x V: 560 x 560 mm Tool installation height min.: 300 mm Opening distance: 750 mm CONTROL: IQT Screen text: german / german Operating instructions: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: 37 kW Total connection value: 58.8 kW Total weight: 9,000 kg Dimensions L x W x H: 5.5 x 1.9 x 2.4 m Terms of payment: 100 % before taking over the machine, purely net
used
Spiral kneader Eberhardt 80 -Spiral kneader Eberhardt -Model Maximat 80 -with stainless steel boiler and stainless steel spiral -for max. 80 kg dough (or 50 kg flour) -Machine is mobile on castors with lock -with plastic flour dust safety cover -with digital control -2 speeds - 2 Automatic timer -380 volts 50Hz -1.8 / 3.6 kW
used
used spiral kneader Eberhardt Maximat MAAN 160 extendable, completely overhauled, 160 kg dough, 2 watches, with 2 stainless steel boilers, stainless steel spiral, many new parts, new friction wheel, new lifting cylinder, electrics renewed, 380/400 V, 3 phases, 50 Hz, 19.5 A, spiral 7.8 kW, boiler 0.75 kW
used
GEBR, FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE MICH BITTE.
used
left - right filling valves: 24 working direction: left-right Format Parts Bottle Size:73mm,87mm,103mm,109mm More then 300 machines new and second hand on our seema .de
used
High pressure standpipe -Pressure: maximum 30 bar -Predos is a special high-pressure standpipe made of stainless steel with a burst pressure of 70 bar -Pressures of up to 30 bar may be required when pressing out blocked drains -High pressure raw -with lid lifter type: Herkules -in the suitcase -Dimensions: 1200/360/H200 mm -Weight: 16 kg
used
Spiral mixer EBERHARDT, type: Maximat 120 - for 120 kg of dough and approx. 75 kg of flour - Stainless steel boiler - Stainless steel spiral (square spiral) - Dust cover is slightly damaged at the back, but can be opened normally - Rear brake is missing - Condition: The machine runs very smoothly and is technically in very good condition Viewing and test run are possible by arrangement.
used
Esseteam/maxima Work Center With Two 1500mm Tables Tool Holder With 12 Pieces Vertical Drilling Group With 18 Drills / Horizontal With 8 Drills, Two Tupias, Engine With Circular Saw And Drill With 360 Rotation.
used
Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.