aco bandschleifer used for sale

Vacuum lifters, vacuum lifters from Schmalz for heavy plates, sheets, etc. Load capacity 300kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees by motor 10 suction cups 370 x 85mm, suction cups partially removable Minimum dimensions of the suction cups: 1250 x 760mm Maximum size of the suction cups: 1900 x 1200mm Acoustic warning signal when the vacuum is too low 400V, 0,37kW Vacuum pump approx.8m³/h Pressure gauge to indicate negative pressure Can be attached to on-site chain hoist Swivelling and snap-in control lever, which means that parts can also be stacked very high With crane bottle holder CE mark No test book available Paint bursts reworked The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Belt sander, make UNKNOWNTechnical specifications:Band width: 40 mmSupport table: 400 x 265 mmExternal dimensions: 550 x 700 x 1500 mmWeight approx: 80 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

TIG welding machine make DALEX type GI 18 LMash. -No: 1810009Power range: 2 - 180 A100% ED at: 130 A60% ED at: 180 ACos: 0.8Protection class: IP 23Dimensions L x W x H: 300 x 500 x 400 mmWeight approx: 29.5 kg- portable version- TIG hose package with burner / welding equipment- Pulse functionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

TIG welding rectifier make MESSER GRIESHEIM type Omnitig 300 DCMake -No: 4140389Welding power at 35% ED: 300 AWelding power at 60% ED: 230 AWelding performance at 100% ED: 180 Aelectrical connection: 380 voltsProtection: 35 amperes15.2 KVA at 300 ACooling: FInsulation: FExternal dimensions: 950 x 500 x 850 mm highused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

x-travel: 400 mm y-travel: 250 mm workpiece height: mm Control: CNC 314 ELESTA total power requirement: 15 kW weight of the machine ca.: 5500 kg dimensions of the machine ca.: m H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distanc ...

MAN E0826 E302 Natural Gas Generator Set for sale. Model: MAN E0826 E302 Fuel: Natural Gas Year: 2004 Hours: 200 Capacity: 65 kW Hz: 50 Voltage: 400 V Scope of supply: Engine, alternator, acoustic canopy with panels, exhaust gas heat exchanger and other accessories . Price: 25,000€

Key data: 400 t, 800 mm

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

Julabo FL300 Recirculating Chiller in Undercounter Design 4.5 l The compact FL recirculating chillers are suitable for a wide range of cooling tasks and can be installed under the laboratory bench to save space. Features Ergonomic design and easy operation Splash-proof membrane keypads Large, bright LED temperature display Reliable Microprocessor PID Temperature Control Reliable, high-performance submersible pumps Permissible return temperature +80°C Easy filling and easy-access drain tap for easy emptying Under-level protection with visual and acoustic signal Integrated stainless steel bath vessels Easily accessible drain tap on the front No side vents: devices can be placed side by side RS232 interface for PC connection IP class according to IEC 60529: 21 Alarm output, potential-free changeover contact (max. 30 VA) Working temperature range: -20 ... +40 °C T ...

Key data: 1094

2 x Caterpillar 3516 Natural Gas with Acoustic Cover Make and model: Caterpillar 3516 Gas: Natural Gas Year: 2001 Hours: 0 kW: 1094 HZ: 50 V: 11,000 Scope of supply: Complete generator sets, Engine, Alternator, Base Frame, Control Panel, Electrical panel, Gas Train, Acoustic Cover, Gas pipeline and other ancillaries. Available for sale. Price: Please Apply.

Code: 0351 Brand: CABO - ITALY Model: 3200 Automatic double end tenoner with tilting blade and scoring unit for panels, furniture, custom-made furniture, kitchens, composite materials, aluminium, acoustic panels Technical data Maximum cutting width mm 3200 Maximum cutting length mm 3200 Minimum distance between blades mm 300 Maximum cutting height mm 100 Maximum diameter of blades mm 300 Maximum diameter of scoring unit mm 200 Blades inclination 0-45° Blade motor power Hp 5 each Automatic feed carriage with variable speed Automatic opening between blades Scoring motor power Hp 1 each Pneumatic workpiece clamping Overall dimensions of assembled machine: mm 4200 x 4500 x 1200 h Overall dimensions for transport: mm 4500 x 300 x 1000 h + mm 4200 x 1100 x 1000 h Weight kg 1700

Key data: 1560

Complete Greenhouse Caterpillar G3512H Generating plant with Codinox. This Caterpillar 3512 generating set is in good condition and has run for only 7,500 hours. Make and Model: Caterpillar G3512H Hours: 7,500 Year: 2018 Capacity: 1560KW Fuel: Natural Gas HZ: 50 V: 400 Electric power 1,500 kW Thermal capacity 1,746 kWth Fuel input (+5%) 3,440 kW Gas consumption (+5%) 391 m3/h Electrical Efficiency 43.6% Thermal Efficiency 50.8% Scope of supply: Complete unit including Engine, Alternator, Base Frame, Control Panel (CAT), Nox Controller, Exhaust gas heat exchanger, HUG Codinox and Acoustic Canopy. Price: €370,000 Available for Sale Now

Structure-borne Noise Sensor, Acoustic Sensor QUASS Type: Acoustic Emission Article: QWT-MICRO Frequency: max. 100 MHz New ! Dimensions (sensor): 31 x 23 x 18 mm Dimensions (packaging): 140 x 80 x 20 mm

Centre d’usinage de profils alu acier pvc : Marque: Ciman Mack 7 lg8000 ou en 2x4000 alternatif +CN sur pupitre filaire 3 axes avec chargeur d’outils (axe Z à revoir) Section 220/120 Bande d’évacuation copeau avec cuve mobile Barrière de cellule en façade et paroir acoustique 3 côtes Poids 3t + 1t Dimensions machine 8000/1200h1500

Sale of a complete line for the production of acoustic barriers for roads and railways. 1) A line for the production of containment boxes for road acoustic panels. The line is complete with all components, currently not assembled, but can be viewed upon request. If you are interested we can provide a quote, without any commitment, both for the complete production lines and for the individual parts. Dont hesitate to contact us if you are interested. Obviously the most attractive price is on the purchase of a complete line as the sale of a single component precludes the integrity of the entire line. Machines of production line list: 1) Profile for sound-absorbing panels to be installed on road barriers. 2) Piemme Decoiler. 3) Profiler with 12 transitions. 4) Cutting shears. 5) Roller bench. 6) Control console.

The wireless recorder with probes allows you to quickly build and expand a centralized temperature monitoring network. No need to physically read data, preview of all sensors in one place, the ability to report alarms visually, acoustically, via e-mail or SMS, these are just some of the advantages of modern JRI wireless data recording systems. JRI is a French company founded in 1845, producing, among others, SPY RF recorders The kit includes: -> SPY SIRIUS RECORDER (ModeM) -> SIRIUS Lite SOFTWARE -> 14 ELECTRONIC THERMOMETERS with 27 PROBES, including: 2 x ELECTRONIC THERMOMETER SPY RF U2 wireless with 2 probes (range: -50 to + 180 C) 11 x ELECTRONIC THERMOMETER SPY RF N2 wireless with 2 probes (range: -40 to + 80 C) 1 x ELECTRONIC THERMOMETER SPY RF N2 wireless with 1 probe (range: -40 to + 80 C) Year of production / purchase: 2015-2018 (system expansion) Due to the liquid ...

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Brunner, servo motor -Type ACO.222A V130 -Voltage: 200V -Speed: 3000 rpm -Shaft: Ø 11 x 20 mm -Quantity: 2x motor available -Price per piece -Dimension: 195/70/H70 mm -Weight: 1.9 kg/pc.

feed pressure: 9,8 bar liter capacity: 17 l/s volume capacity: 1,02 m³/min total power requirement: 7,5 kW weight of the machine ca.: 0,352 t Atlas Copco screw compressor G 7 FF - 9.8 bar incl. 270 litre tank Fully automatic, internally fully piped and wired compact unit, single-stage, oil-injected compression, air-cooled, sound-insulated. Built-in refrigeration dryer. - Steel base frame for installation without foundations. Compressor and motor elastically mounted on base frame. - V-belt drive with mechanical tensioning device between motor and compressor element. - Sheet steel acoustic bonnet with large removable side panels. - Air intake filter with loading and unloading valve. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3155

Make and Model: Rolls Royce KVSG 18 G4 The engine is from 1994. It had a full rebuild in 2004. Fuel: Natural Gas Capacity: 3155kW Hours: 63,000 HZ: 50 V: 10500 Scope of Supply: Engine, Alternator, Base frame, Acoustic Container, Exhaust Gas Heat Exchanger, Control panel and synchronisation panels . Please note: circuit breaker and transformers are not included. Price: €200,000

Key data: 140 , 400

Complete plug-and-play natural gas plant. Make and Model: MAN E2876 E312 Capacity: 140kW Year: 2016 Hours: 6954 Fuel: Nat Gas Volts: 400 V: 50Hz The plant was oversized compared to the needs of the factory in which it was located, and for this reason it was sold despite the low number of operating hours. Scope of Supply: Engine alternator control panel gas line acoustic canopy muffler air intake filter exhaust air filter and other accessories.

Used line for packing product into cups by FDPm type PAK 2LTF. New 2015. Power supply 3 x 400 V Power 6.5 kW Pressure 6-8 bar Weight 3400 kg Technical specifications: 1. the control of the machine is supervised from the control panel Mitsubishi controller. The machine operates in an automatic cycle. The controller has the following operating programmes: - automatic operation mode with control of the product level in the tank - presence of packages - cyclic operation mode - one cycle - dose regulation The control system switches off the dispensers in the following cases: - lack of pressure - opening of covers - lack of packaging The control system is also equipped with: - visual and acoustic signalling of the operating state 2. Control cabinet - IP 65, located inside the unit, equipped with ventilation and a heat sink. In addition, the electrical cabinet an ...

For Sale is a ACOTEC Production Line Manufacturer: ELEMATIC Output: 160 m2/h (double line) Year: 2019 This offer comprises 2 ELEMATIC production lines with a combined capacity of 160m2/h and also includes a FRUMECAR batching plant. Acotec panels are precast, non-load bearing partition walls. They are room-high and 600-mm wide, with a tongue and groove design along the vertical edge. The panels are 6 times faster to install than traditional brickwork and twice as fast as blockwork. Modules list of the production plant -Concrete Supply -Plate Handler -Plate Feeding Conveyor -Casting Module -Product Module 6/100 -Saw -Conveyor for Saw -Trimmer -Product Conveyor -Recycling -Stacker -Stack Conveyor -Stack Return Conveyor -Crossing Station -Restacker -Product Tilting Receiver Conveyor -Product Tilting Device -B-Quality Conveyor -Pallet Conveyor -Cleaning  ...

Air-controlled cellar unit of the DUOMAT type series, which can be used both in the storage cellar for filter and storage tank charging and in the pressure tank cellar for filler charging. Due to its automatic switching and venting system, the device replaces the manual changeover work of a conventional blending apparatus and thus provides maximum safety and simplification in cellar work. Features: Collecting lantern, two pneumatically operated disc valves for the tank connections, disc valve for manual operation, pneumatic switching pulse generator in connection with float system, control manometer, venting valves on the lantern cover, two additional valves on the inlet connections. All pneumatic elements, compressed air filter with water separator, acoustic signal, control buttons are housed in small stainless steel control cabinet., Additional title: one lantern, Voltage: 220 V, Frequ ...

- Description 63 Acon CTS - Spindle 20,000 rpm HSK - APS (Advanced Process System) (only with Heidenhain CNC) - Advanced APS (Extended Advanced Process System) - RNS (Remote Notification System) - Tool magazine ATC 220 HSK A63. - Exchange station - Tilting table with System 3R attachment for Dynafix 280x280 pallets Complete protection booth with transparent ni polycarbonate panels - Transparent scratch-resistant guards - Chip and coolant collection tank - Extended heavy-duty chip conveyor - 580-l paper filter with CTS 18-80 bar - Rotoclear - Oil mist cooler. - Manual workpiece/machine washing device - ITC (Intelligent Thermal Control) - ITC 5AX (Intelligent Thermal Control 5Axis) - Tool control with laser - Air blower for tool cleaning - Provision for workpiece touch probe - Workpiece touch probe with HSK 63 A/B connection - Pallet changing unit for System 3R Dynafix ...

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Price: Please Apply

OKUMA GENOS M460R-VE CNC machining center was built in 2016 in Taiwan. This technologically advanced machine was designed with the goal of providing its user high reliability as well as extreme precision, while its extensive machining capabilities will significantly improve any manufacturing process. One of the many innovative technologies incorporated into the machine is the Machining Navi M-g technology, which computes the most favourable machining parameters for a given job based on an analysis of the acoustic spectrum. The system also levels the vibrations and oscillations that occur at the contact between the tools and the workpiece, resulting in better workpiece surface quality, longer cutting tools life and low load on the main spindle. In addition, despite the most demanding machining operations, the OKUMA GENOS M460R-VE CNC vertical machining center remains very economical ...

Dimensions search coil opening (WxH): 650 mm x 150 mm, Metal-free zone on both sides of the search coil: 75 mm, Inlet length to the metal-free zone: 1,200 mm, Conveyor dimensions (LxW): 2,200 mm x 600 mm, Transport height: 800 mm +/- 50 mm, height adjustable feet, Conveyor belt speed: 25 m/min (adjustable via frequency converter), Conveyor Type: Intralox 1100 Flush Grid - BLUE, Running direction: standing in front of the control panel: from right to left, Degree of protection: IP66, Ejection system: Stop if metal is found with an acoustic signal

We offer 4 system rooms with L-shaped ceiling Basic dimensions: 
 Room 1: 2,750 m x 5,015 m; H = 2,880 mm, left H = 2,705 mm, Room 2: 9,300 m x 4,910 m; H = 2,880 mm, left H = 2,705 mm, 
 Room 3: 5,000 m x 4,551 m; H = 2,880 mm, left H = 2,705 mm, Room 4: 5,000 m x 4,551 m; H = 2,880 mm, left H = 2,705 mm. The walls are made of double-skinned, powder-coated sheet steel filled with mineral wool, equipped with 6 mm float glass. They offer a sound insulation of approx. 25 dB at 1,000 Hz and are also partly equipped with air slots for an air passage of 300 cubic meters/hour. The surface is powder-coated. The ceiling is a sheet steel cassette ceiling (distance DTR = approx. 1,018 mm) made of perforated cassettes, surface powder-coated, grid 625 x 625 mm, cassettes clamped, profile rails not visible. Thermal and acoustic insulation by 35 mm mineral wool, highly compacted, alu ...

OKUMA LB3000EX II CNC turning center was built in 2014 in Japan. This highly technologically advanced machine designed for the most demanding production challenges is distinguished by its extensive machining capabilities, reliable components and extensive equipment. This is what makes the machine ideal for efficient turning, milling, drilling, threading and slotting of workpieces with the highest precision and accuracy. In order to guarantee high dimensional stability and rigidity, an inclined bed is used inside the machine, on which the spindle and turret head are optimally positioned. In addition, special sensors have been placed in the key zones of the bed, spindle and head support, which monitor the current temperature status and actively correct the working travels. This solution helps to ensure proper thermal properties inside the working area. The LB3000 EXII MY C 450 lathe  ...

without specification: - - - without specification: - - - without specification: - - - Stacker, was last used on an MM-ACORO line The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis DMG SAUER LASERTEC 40 Laser engraving and cutting machine was manufactured in 2008. It utilizes a Nd:YVO4 laser with a wavelength of 1064 nm, ensuring precise and detailed work. The machine features an acousto-optic Q-Switch for pulse enhancement, contributing to its efficiency and quality. A cooling system using deionized water maintains optimal temperature during operations. Buy this DMG SAUER LASERTEC 40 Laser engraving and cutting machine. For more information about this laser engraving and cutting machine, please reach out to us.

CNC punching machine Brand: Vitap Type: MICRA New machine High-Performance CNC machine for the production of acoustic panels with Micro-Perforation - Every 4 seconds the punching of 1.000 up to 2.331 holes are possible (depending on the workpiece) 3 controlled axes: - X-axis: drive via 2 motors and planetary reduction gear, guidance via pinion and rack - Y-axis: drive via 1 motor and planetary reduction gear, guidance via pinion and rack - Z-axis: drive via central hydraulical unit Easy handling with TPA control - Virtual display of programmed punching holes in the CAD environment - Optimization software for the working process - LCD TFT Monitor 20 - USB port - Basic Version CAD TPA - Macro programming Processing head - 5mm grid in X- and Y-direction - Punch depth: 3mm - Changable punching tools The processing head can optionally be customized  ...

Troughfeed boring machine Make: VITAP Type: ACOUSTIC For creation of acoustic panels for noise reduction Boring machine with through feed panel, boring from the bottom and automatic panel return to the operator. Three controlled axes: - X Axis - Panel movement by means of a strong pneumatic clamp - Y Axis - Boring head movement - Z Axis - Panel boring - Newly patented, high rigidity boring head movement on Y and Z axis. - Constant Side pusher: Side pusher with constant preload for perfect positioning of the panel on the machine zero point. - New frontal and more user friendly tool change system No limit in panel length High productivity and flexibility - The drilling head processes several holes at the same time - Different grids are possible also drilling grids with shift - Different drilling heads are optional available Easy TPA programming - Control: F ...