abs schwabe used for sale

Compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure vessel, compressor tank -Manufacturer: ABS, universal pressure vessel steel from tray sealing machine Inauen VC999/ TS 1200 N -Type: MS190420 -Content: 13.5 l -Dimensions: 435/195/H255 mm -Weight: 3.4 kg

A silo system consisting of 3 storage silos, 1 weighing silo and conveying units is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, storage silo volume: 32.6m³, weighing silo volume: 13.8m³. Storage silo capacity at 0.2t/m³: 6500kg, weighing silo capacity at 0.2t/m³: 2800kg. Storage silo dimensions X/Y/Z: 4200mm/4200mm/4200mm, weighing silo dimensions X/Y/Z: 3000mm/3000mm/3400mm, control: Siemens S7. Including steel frames, gate valves, full and demand indicators, filter bags, filling line, conveying and dosing system, rotary valves and gate valves. Documentation available. On-site inspection is possible.

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/16011 piece Punching bracket, punching unit for press brakeYear of construction approx. 1990Throat: 160 mmPunching capacity: 0.3 to 5 mm Material thicknessHole diameter: 2 to 7 mmInstallation height: 203 mm (only the punching bracket individually with punching tool)Installed is a round hole tool ø 5 mmPunching bracket distance: 195 mm- the tool unit was mounted on a hydraulic press brakeDimensions punching bracket base plate L x W x H: 2500 x 345 x 37.5 mmDimensions of punching bracket printing plate L x W x H: 2500 x 173 x

Front brush, front sweeper, sweeping roller, sweeping brush -Suitable for: Iseki Hako and other tractors -PTO drive -Three-point recording -hydraulic: swiveling -Broom width: 1200 mm -Weight: 140 kg

I - beam section - flat steel: 120 x 20 (d 750) mm I-beam section - upend: 60 x 10 (d 800) mm L-beam: 50 x 5 (d 1200) mm bar material - diameter: 35.0 (d 800) mm bar material dia. max.: 70 x 3.0 (d 1200) mm : 50.0 mm diameter of upper rolls: 155 mm diameter of lower rolls: 155 mm Stroke length: 150 mm Rotating speeds: 9.0 U/min total power requirement: 1.3 kW weight: 305 kg range L-W-H: 900 x 700 x 1500 mm Features: - Robust electric-motor-driven ring/profile bending machine - Machine base frame with rear shelf - Capable of horizontal and vertical operation - Segmented standard rollers (split) - 2 sets of tube rollers, 50 + 60 mm - Manual adjustment of the upper roller - Analog position indicator for the upper rollers (scale) - Manually adjustable side/alignment rollers - Base frame with forklift pockets for easy transport The data for this ad was created with ModulMWS - the software s ...

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for "modernization" were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger" - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating el ...

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Shaft: Ø 39 mm -Shaft length: 470 mm -Recording hole: Ø 17 mm -Number: 4 pieces of shock absorbers available -Price: per piece -Dimensions: 1755/140/H100 mm -Weight: 24 kg/piece

ENIDINE HD 2.0 x 28 FMP Industrial Shock Absorber / Hydraulic Buffer – Heavy Duty Damper Sell a large ENIDINE/ITT Enidine Industrial Shock Absorber from stock. Data according to nameplate: Manufacturer: ENIDINE / ITT Enidine Type: HD 2.0 x 28 FMP P/N: FMP34530-R Heavy-duty hydraulic shock absorbers / industrial buffers For mechanical engineering, conveyor technology, crane systems, end stops, industrial plants, etc. The shock absorber is in a sturdy wooden box. Condition see pictures. Probably unused stock, but with traces of bearing and dirt. Function was not checked, therefore sold as stock goods/spare part. Important note: Do not open – component is under pressure according to the warning. Price: 500 € VB Pickup only due to size and weight. Private sale / stock liquidation, no guarantee, warranty or return.

Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, speed encoder, incremental encoder -Manufacturer: Contact, rotary pulse encoder -Type: Dg 122.1 -No.: 401849/ 1 -Connection: 1 2 = 20 VAC/1000 rpm -Max: 10000 rpm -Quantity: 4x available -Price per piece -Weight: 1kg/pc.

Shock absorber, gas spring, shock absorber -Shaft: Ø 35 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 8 pieces available Price: per piece -Dimensions: 75/160 mm -Weight: 3.8 kg/piece

Shock absorber, gas spring, shock absorber -Shaft: Ø 50 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 5 pieces available Price: per piece -Dimensions: 95/170 mm -Weight: 6.6 kg/piece

Shock absorber, gas spring, shock absorber, start-up damper -Pipe: Ø 82 mm -Total length: 510 mm -Hole diameter: Ø 24 mm -Number: 2 shock absorbers available Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece

A dust absorber is a device that is connected to the ventilation system. Its function is to extract suspended particles. This task is fulfilled by the fan and filters built into the device. Using a dust absorber improves air quality, making it easier to keep the machine clean. As a result, the life of the device is extended. Using it is also safer for the environment and the health of the operator. Specifications: Power supply: 400V AC 50hz Capacity: 3000-4000 m³ Rated power: 7.5kw Filtration area: 40 m² Number of filters: 4 pcs Filter size: ⌀325mm Filter height: 660 mm Weight: 400 kg Height: 1980 mm Width; 1000 mm Depth: 1000 mm

Absorption dryers

Absolute rotary encoder, encoder -Type: AMG 73 S W29 S2048 -Factory no.: 0181476 -Number: 2x available -Price: per piece -Weight: 0.6 kg

Absolute encoder -Hollow shaft: Ø 12 mm -Dimensions: 80/85/H60 mm -Weight: 0.5 kg

shock absorbers -Manufacturer:Sachs, shock absorber type T45x248 hA 2 pieces -Art.No.: 25 1 700 106 030 003 326 2500 -Hole: Ø 16 mm / distance 425 mm -Price/Delivery: complete -Dimensions: Ø 75 x 480 mm -Weight: 5.5 kg/piece

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, shock absorber type DYSW-12-20-Y1F 548075 -Stroke travel: 20 mm -Number: 16 dampers available -Price: per piece -Dimensions: Ø 16 x 112 mm -Weight: 0.1 kg/pc.

Absolute rotary encoder, incremental rotary encoder with solid shaft -Type: BVS58N-011AVR0NN-0013 -Factory no.: 113845 -No.: 0425903 -Quantity: 3 available -Price: per package -Weight: 0.5 kg

Absolute encoder, incremental encoder with solid shaft -Type: 127 BA Series: 71 Price: per piece Quantity: 5 available -Weight: 0.5 kg

Circuit breakers, circuit breakers LS MCCB ( LSMCCB ) META MEC ABS 53b ( METAMECABS53b ) 20 A 690 V New ! Dimensions: 140 x 100 x 90 mm

Shock absorber ENIDINE OEM 1.25Mx2 stroke: 50 mm rod: Ø 9 mm damper attachment:: Ø 25 mm sensor may be defective ! Dimensions: 215 x 75 x 70 mm

hydraulic high-performance shock absorber ENIDINE HD 1.5x14 FF FI ( HD1.5x14FFFI ) stroke: 350 mm rod: Ø 28 mm damper attachment:: Ø 60 mm used, tested ! Dimensions: 930 x 120 x 120 mm

Shock absorber ENIDINE LROEM 3/4x2 stroke: 50 mm rod: Ø 13 mm damper attachment:: Ø 38 mm New ! Dimensions: 200 x 57 x 57 mm

Shock absorbers, pneumatic POWER COMPONENTS POWER SPRING PS110 Pneumatic Spring stroke: 70 mm Rod diameter: 73 mm New ! Dimensions: 200 x 130 x 170 mm

mobile extraction Brand:SCHUKO Typ: Vacomat 200 XPe Techncal data: Connection Ø: 200 mm Filter cleaning: motorical Nominal volume flow: 2262 m³/h Motor power: 4,0 kW Filter surface area: 14,5 m² Dust level M, AWN 16 Noise absorbation: 73 dB(A) Test sign H3 / BGHM HO 123027

Mobile dust extractor SCHUKO Type: Vacomat 180 XPe Technical data: Connection Ø: 180 mm Filter cleaning: motorical Filter surface area: 13,5 m² Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Dust level M, Test sign H3 / BGHM HO163002 AWN 16 Cone Noise absorbation: 74 dB(A)

Stock number: P280, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Pump, Construction: Mounted on stainless foundation, Motor: 0,55 kW - 380 Volt - 1410 rpm., Theoretical capacity: Max 2500 l/h., Manufacturer: ABS/SIHI, Type: AKLA 1201

PREALPINA EXTRUDER 130 mm., For PE PP ABS PS PC PS, nominal throughput rate 500-600 kg/h depending on material and feeding rate, 200 kw. d.c. drive and starter (new 2019), Electric cabinet, CE compliance, users manual, electrical drawings, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, Constructed 1996,, offered : checked for good working conditions, installed power - used power in work: about 60-65% : 200, conditions: AS IS OR RECONDITIONED TO YOUR BUDGET EXTENT, options available: AS IS or RECONDITIONED, capacity: 500-600 kg/h nominal capacity

CDM PREALPINA USED EXTRUSION LINE, for HDPE LDPE LLDPE PS PC ABS PP, nominal throughput rate 240-320 kg/h (depending on material and feeding rate), Total installed power 104 kw d.c.380 V 50 H 3Ph (65% used in work), including:, scrap silo with extraction screw, crammed feeding unit, extruder with heaters and vents,, 85 mm Ø screw 35 L/D (reconditioned to 100% performances), vacuum degassing pump, semi-automatic non-stop hydraulic screen-changer complete with hydraulic pack, water ring pelletizer, drying centrifuge, new electric cabinet, CE compliance, User’s manuals, Electrical drawings, This line is offered fully RECONDITIONED, availability: about 10 weeks from confirmation, capacity: 240-320 kg/h, INSTALLED POWER: 104 kw

Absauganlage / Extraction System Schuko Duplo S 18 Baujahr / Year 2007 - Serial-No. 1807159 Volumenstrom 2380 m3/h Motor kW 2,2 - A 10,4/6,0 - V230/400 Hz 50

TECNOVA RECYCLING EXTRUDER, for PE PP PS PC ABS, Barrel with 130 mm screw 54 L/D, as new screw and barrel, n.2 degassing pumps for slightly moist or heavy prints, hydraulic screenchanger, hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet for complete management of the line, in need of reconditioning, capacity: 500-600 kg/h, conditions: reconditioning needed, type: 130 mm. 54 L/D 2xdegassing points 500-600 kg/h nominal throughput rate

Flame atomic absorption spectrophotometer AGILENT FS 240 complete set

Sell an ENIDINE Heavy Duty Industrial Shock Absorber, Type HD 2.0x28 FMP, P/N FMP34530-R. Unused stock in wooden box. Condition visually good, precise technical inspection not carried out. Ideal for mechanical engineering / industrial equipment / spare parts needs.

Perkin Elmer AAnalyst 600 Atomic Absorption Spectrometer Untested Equipment Without a computer Without software

Zeeman Varian Spectra 220 + GTA 110 and SPS 5 Atomic Absorption Spectrometer Equipment in average condition Untested material No computer and no software

Automatische Be- und Entladestation für z.B. Platten, Fronten, Türen u.v.m Zum Be-und Entalden von Schleifanlagen, Lackieranlagen, Kantenanleimmaschinen u.v.m Die Maschine arbeitet mit einer konstanten Geschwindigkeit und eingestellter Belade-und Entladekapazität. So automatisieren Sie einfach Ihre Beschickungs-und Abstapelvorgänge und erhöhen die Prozesssicherheit. Technische Daten - Arbeitsbreite 1.100mm, optional andere Arbeitsbreiten möglich - Inklusive Gurtbandtransport, Länge 2.400mm, optional andere Längen verfügbar - PLC Kontrolle, Bedienung über ein Touch Panel - Be- und Entladen der Teile mittels Vakuumsauger - 8 x 75mm-Festo Sauger mit Positionseinstellung - Automatisches Signal nach Abschluss des Ladevorgang - Automatisches Signal, wenn das Ladegerät voll ist Technische Daten: - Automatisierungskomponenten: LS - Elektronische Komponenten: Schneider Elektronik - P ...

CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing for ...

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

Portable pressure sandblasting machine (mobile blasting vessel) Brand AIRBLAST Mode ABSC-200 Internal stock no. INV.044 Country of origin of the manufacturer The Netherlands Current location Pitesti, Romania Condition Functional, sold as is TECHNICAL CHARACTERISTICS Tank capacity 200 liters Pressurization type Pressurized vessel Mobility Trolley with 2 wheels and stabilizing leg Control Pneumatic remote control system (deadman) Supply Compressed air Included accessories Abrasive tap, air separator, quick connectors, hose more technical data see, attached pdf 7 - Blasting vessel.pdf Auction-ID: A7-48723-10

MAJA PART NUMBER : 515-0422 TRANSPORT SCRAPER ROLLER Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

2.090 litre, Stock number: T3638, Litre: 2.090, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 5 pcs., Item: Filter tank, Standing: Hanging in legconsol, Top: Dished, Bottom: Dished, Filter: In the top and bottom, Inner diameter: Ø 800 mm., Total height: H 4240 mm., Manufacturer: Shanghai Chengdong Technology CO., LTD, Model/type: SX-800, Year: 2017

GAMMA MECCANICA GM 125 COMPAC - TOTALLY RECONDITIONED, Extrusion line with pre-compactor, Nominal throughput rate 700-800 kg/h depending on the type of material and feeding rate, Average energy consumption : 0.25-0,30 kwh/kg, The line includes:, Loading belt, tunnel metal detector, compactor with dosing unit, extruder with 125 mm screw diameter, 35 L/D, nitrided screw and barrel in very good conditions., The line was working with LDPE film and PPL non woven., Previous owner never pushed the extruder over 600 kg/h, semi-automatic, non-stop hydraulic screenchanger, oleo-dynamic pack, water ring pelletizer, drying centrifuge, recycling water tank, electric cabinet for the complete management of the line, The line is offered reconditioned, See Constructors [description](.gamma-meccanica.it/en/plastic-recycling/plastic-recycli ng-compac/) for a new line like this one, availability: immediate, ...

PREALPINA CDM EXTRUSION LINE 105 mm strand, loading hopper for hard plastics (possible addition of feeding screw on request), extruder with screw Ø 105 mm 35 L/D, n.1 vacuum degassing pump, d.c. motor 117 kw 400 V 3Ph.50 Hz, semi-automatic, non-stop, hydraulic screen changer, hydraulic pack, strand die, cooling bath, air drying tunnel, strand pelletizer, vibro classifier, The line is offered reconditioned, availability: 6 weeks from confirmation, options available: different cutting, different screen, upstream and downstream equipment, capacity: 400 kg/h, conditions: reconditioned with warranty, type: single screw

As good as new G40 Gilnhammer plates 1000x1000mm, single-sided with 2 attachment points, single-sided 30 pieces Auction-ID: A1-48530-2302

HEXAGON ROMER ABSOLUTE ARM RA-7525-3 coordinate measuring arm was built in 2014 in France by Hexagon Metrology. The device is used for the precise 3D measurement of complex parts, which are usually inspected on complex metrology devices. The process, thanks to the use of absolute encoders, is performed immediately. Simply switch on the arm and start measuring. What’s more, the universal mount allows the change of measuring probes at any time, without the need to recalibrate. The Zero G counterbalance minimises torque in the base of the device, increasing freedom in mounting options, i.e. lightweight tripods, magnetic and vacuum bases. This solution, combined with immediate acoustic and haptic feedback to the operator, allows the machine to be used in even the most demanding industrial environments. When the HEXAGON portable measuring arm is not in use, it can be locked safely in the ...

ABS 3880 Suction system 2 sack ABS 3880 2x300L Suction capacity 3880m3/h 3x100mm 2.3 hp S1/ 3.5 hp S6

ABS 2480 Aspirator N E U MASCHINE ! Suction system ABS 2480 400V 2 hp 300 L chip sack Suction capacity of 2480 m3/h 2 100 intake connections Weight 51 kg METAL WINGS! Driving equipment! G&HM-ABS2480

This ROMER Absolute Arm 7730 was manufactured in 2017. It features a 3.0 m measurement range, volumetric accuracy of ±0.040 mm, and weighs 8.3 kg. Designed for ease of use with a Zero-G counterbalance, carbon fiber tubes, and continuous rotation of the main axis. Includes a mobility package with batteries and Wi-Fi, and a magnetic base for versatile mounting. If you are looking to get high-quality measuring capabilities consider the ROMER Absolute Arm 7730 machine we have for sale. Contact us for more information.

Manufacturer: Rippert, Type: Absaugventilator, Year: ca.1995, Diameter intake mm: 155 , Engine power kW: 1,3, Flow rate approx. m3/h: 1500, rotations rpm: 2860, Direkt drive: yes, Wight approx. kg: 60, Required space L x W x H mm: 800 x800 500, Vorführung möglich: yes, Year :ca.1995