abs schwabe used for sale

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/16011 piece Punching bracket, punching unit for press brakeYear of construction approx. 1990Throat: 160 mmPunching capacity: 0.3 to 5 mm Material thicknessHole diameter: 2 to 7 mmInstallation height: 203 mm (only the punching bracket individually with punching tool)Installed is a round hole tool ø 5 mmPunching bracket distance: 195 mm- the tool unit was mounted on a hydraulic press brakeDimensions punching bracket base plate L x W x H: 2500 x 345 x 37.5 mmDimensions of punching bracket printing plate L x W x H: 2500 x 173 x

Herman Schwabe Die Cutting Shaping Press Mechanical Press Model DG-HD Platen size 770mm x 1000mm Die cut shapes Manual cut / load pressure 4" stroke, 7" bore, 10 H.P. Motor, 415 volts 50 cycles 3 phase 14.84 full load current Made in Brooklyn, New York Serial number 50367 Complete with starter Overall dimensions 1.2m x 1.5m high x 3.3m long

Linen store leaching for small quantities table table room made of stainless steel including draining plate and lid for lye tray suitable for metal size 600 x 400 mm, 530 x 650 mm, 580 x 780 mm Mass (WxDxH) in mm: 550 x 610 x 121 (with swivel lever: 550 x 710 x 121) ; ready to go!

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

Ribbon system Covema-Schwabe Y.O.M. 1994 User manual with functional overview - Machine control elements - Program overview - Commissioning and storing removal Reel MHM 2 - hydraul. Spreading (motor 1.5 kW / 1500 U) - hydraul. Pressure roller - with drive max. coil weight - 2 t Coil outside through. - 1650 mm Coil inner throughm. - 350 - 460 mm Bandwidth - 400 mm Feed machine VRMA 32/96 Bandwidth 320 mm Straightening roller sifm. - 40 mm, 7 pcs Straightening head can be done by hydraul. to open Intermediate air central. Controller more info on request

Double end tenoner Schwabedissen Type: DAa 200 Working width 1000 mm 3 motors per side: Saw 8.3 kW swivel Milling machine 4.5 kW swivel Milling machine 4.5 kW swivel Chain track with cam spacing 380 mm Lower chain projection 500 mm External dimensions 3600 mm x 2340 mm

Key data: 190 mm, 450 mm

available Lab Mill! Description attached !

Area lighting, floodlight, workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 500 watts -Number: 6x lights available -Price: per piece -Dimensions: 245/170/ H620 mm -Weight: 4.8 kg/piece

Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 7.5 kW -Speed: 2860 rpm -Voltage: 380 V -Shaft holder: Ø 40/80 mm -Price: per piece -Number: 2 pieces -Dimensions: 675/250/H255 mm -Weight: 98 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 6.3 kW 5800 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 540/260/H150 mm -Weight: 43 kg

A Schwabenthan laboratory rolling mill is available. Roll width: 110mm, roll length: 350mm, roll diameter: 110mm, roll speed: 27rpm, bottom-roll axle distance: approx. 1200mm. On-site inspection is possible.

A Schwabedissen DAZSa23 double-end profiler is available. Working width min./max.: 400mm/1250mm, chain track-cam distance: approx. 405mm, external dimensions at max. working width: approx. 3100mm/2800mm. The machine has 4 swivel motors on each side. On-site inspection is possible.

Various old woodworking machines are available. 1) Joos triple veneer press. 2) Frommia FS 60 post router, year of manufacture: 1985. 3) Schwabedissen planer. 4) Column drilling machine Ayen. On-site inspection is possible.

Decoiler, Reversible Decoiler GSW SCHWABE Type LHD 50/800 SondDouble Decoiler, Double DecoilerFabr. No. 5775 Year of construction approx. 1995Coil weight 50 kg per sideCoil width max. 130 mmCoil inner diameter 155 - 445 mmCoil outer diameter 850 mmFeed washers 850 mmThrust rings 850Middle reel shaft to reel foot 980 mm- Reel structure manually rotatable by 180 with locking steps- central spread via rotary lever adjustment- mechanical disc brake, adjustable brake shoes via knurled screwSpace requirement

Tenon cutting and slitting machine No further data known

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Unfortunately, no type plate, therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 40 mm -Tool: Ø 200 x 20 mm -Dimensions: 520/250/H160 mm -Weight: 42 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Unfortunately, no type plate, therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 40 mm -Tool: Ø 165 x 10 mm -Dimensions: 500/250/H160 mm -Weight: 42 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 35 mm -Tool: Ø 180 x 40-55 mm -Dimensions: 540/250/H160 mm -Weight: 46 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW at 2880 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 220/380 volts -Receiving shaft: Ø 40 mm -Tool: electrically movable -Tool: Ø 180 x 28-48 mm -Dimensions: 830/400/H200 mm -Weight: 70 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: Schwabe, double grinding wheel type EK4/4 -Grinding wheel: max. Ø 400 mm / Actual Ø 360 mm -Speed: 1400 rpm -Operating voltage: 380/660 volts -Motor power: 3 kW -Dimensions: 1320/930/H1450 mm -Weight: approx. 500 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 2900 rpm at 50 Hz -Power: 6.3 kW 5900 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 38 mm -Tool: Ø 200 x 30-60 mm -Dimensions: 640/150/H250 mm -Weight: 52 kg

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...

Suction with electric motor,intake opening D=150mm, blow-out D=115mm, motor 0.6KW

Ladies and gentlemen, We are pleased to offer you a hand bagging machine. If necessary, we can send you pictures and specifications. Please send us your request. We will be happy to answer your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the  ...

Suction register: Make : Wolf Built: 2004 Dimensions: 3500 x 1500 x 650 mm and 2500 x 1500 x 650 mm (approx. LxHxD) only 4 pieces left in stock In addition, we offer: Exhaust air unit with exhaust air pipe and deflector hood depending on size. Rectangular sewer pipes 1200 x 600 mm, unit price € 50,- net from location. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Gate valve, ball valve Brand BORSIG Operating pressure 100 bar ANSI 600 Manufacturer # A51801005 Pipe DN 300 Price 500.00 euro net

ABS 3880 Suction system 2 sack ABS 3880 2x300L Suction capacity 3880m3/h 3x100mm 2.3 hp S1/ 3.5 hp S6

Suction wall with exhaust air unit, supply air unit, supply air filter, hot water heating register Suction wall: Make : Krautzberger, built 1992 Dimensions: 2.2 x 3.0 x 0.8 m (approx. BxHxT) Fan: 9,240 m3/h suction power, 2 kW Ex Supply air filter, supply fan, WW heater register: Make : Wolf, built 1999 Fan: 10,000 m3/h suction power, 9 kW Heater: 56 kW, 120 degrees C, 3,500 m3/h Pipeline : supply and exhaust air ducts, deflector hood We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.