129,270 used machines on RESALE, but how to find them? Machine Search
ABB Robotics Robot IRB 2400/16 S4C M98 Control: S4C M98 Number of axles: 6 Max. load capacity: 16 kg Max. working area: 1550 mm Year of construction: 2000 Scope of delivery : Robot, Controller, Cable, Teachpanel, Circuit diagrams 2 weeks start-up guarantee. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited. The indicated retail price is exclusive of the statutory VAT of 19%.
Geared motor, electric motor, three-phase motor, electric geared motor -Power: 0.1/0.75 kW -Speed: 12/53 rpm -Voltage: 380 V -Design: B3 -Shaft: Ø 39/50 mm/Ø 35/80 mm -Protection class: IP54/55 -Brake: 1.8 Nm -Quantity: 1 piece -Dimensions: 760/220/H265 mm -Weight: 51 kg
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 0.55 kW -Input: 200-240 V 50/60 Hz 7.4 A -Output: 0-240 V 0-400 Hz 3 A 1.1 kVA -Number: 11x available -Price: per piece -Dimensions: 170/70/H185 mm -Weight: 1.3 kg
Turbocharger ABB Type.: TPS52-FF3 For Jenbacher 6 Series Refurbished by ABB
Scaffolding planks used . Stored in a dry place, sorted manually. Ideal for furniture manufacturers
T15 - used approx. 45 m³ / 45,000 L steel tank, pressure tank, coated inside, lying on steel bases. Technical details: Content: approx. 45 m³ / 45,000 litres Material: Steel tank with inner coating Manufacturer: Tank- u. Stahlbau Abersfelder Dimensions: approx. Ø 2.30 m × L 11.00 m / H total 2.50 m Other: Used steel tank with Poxitar inner coating (2-component polyester resin), professionally cleaned and in good condition. Pressure tank 10 bar. Horizontal storage container on 2 steel bases, several inlets and outlets. Can be used as an above-ground tank or as an underground tank. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam husks, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc., o ...
grinding length: 1.000 mm grinding width: 600 mm workpiece height: 400 mm control: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mm travel cross (z-axis): 540 mm distance table surface - grinding spindle centre: max. 600 mm Travel vertical (Y-axis): 500 mm Max. working height on new grinding wheel: 400 mm workpiece table: : Electro permanent magnetic plate: 800 x 500 mm pole pitch: 18 mm clamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/min Electromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mm measuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mm El ...
Frequency converters, frequency converters, drive converters, controllers, variable speed drives, servo drives -Type: ACS60100163S00C1200901 -Input: 380-415 V 48/63 Hz -Output: 0...300 Hz -Price: per piece -Number: 2 pieces -Dimensions: 255/285/H420 mm -Weight: 18 kg
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 175 mm -Plate thickness: 26 mm -with: support ribs -Weight: 90 kg
In stock as standard. Small U-head sockets, ideal for special work in crawl spaces and work on window frames. U Head Socket 1.60 Meter new -Retracted length of the screw jack: 1.00 meters. -Extended screw jack length: 1.60 meters. -Stutz is completely galvanized. -Stutz is equipped with finger protection. -Stutz is equipped with an anti-slip device. -With outer tube reinforcement -U-head size: 156x120x80 mm
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 0.55 kW -Input: 200-240 V 50/60 Hz 7.4 A -Output: 0-240 V 0-400 Hz 3 A 1.1 kVA -Number: 2x available -Price: per piece -Dimensions: 126/68/H140 mm -Weight: 0.8 kg
adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer: ABM -Gearbox manufacturer: ABM -Motor power: 0.37 kW -Speed: 45 rpm -Construction: B3 -Drive shaft: Ø 30 mm -Protection class: IP 44/54 -Dimensions: 550/230/H195 mm -Weight: 30 kg
ABB TPL 65-A30 Turbocharger Used but in good condition Inspection report available From our istanbul stock
used
Dear Ladies and Gentlemen, We have constantly used transformer stations for wind turbines from 630 KVA to 2500 KVA in very good condition in stock
Dear Ladies and Gentlemen, We constantly have transformer stations for wind turbines in every power and voltage.
Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP55 -Dimensions: 450/295/H250 mm -Weight: 43 kg
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Używana linia do konfekcjonowania produktów sypkich do saszetek typu stick z podajnikiem, przenośnikiem i pionową pakowaczką zbiorczą. W skład linii wchodzą: 1. Wielotorowa rękawowa pakowarka pionowa produkcji Josef Blazek model ABM-5EN40 do konfekcjonowania produktów sypkich do saszetek typu stick o szerokości 40 mm. Rok budowy 2005. Wymiary opakowania: szerokość saszetki: 40 mm, długość saszetki: regulowana 50-180 mm. Pakowany produkt: 3 w 1. Dozowanie – dozownik objętościowy: 12-20 g/ 1 porcję Liczba miejsc pakowania na i cykl roboczy: 5 Liczba cykli na minutę: 60 cykli/minutę Wydajność (liczba saszetek): do 150 opakowań/minutę Szerokość folii opakowaniowej: 460 mm Saszetki z rękawa posiadają jeden zgrzew pionowy i dwa poziome. Rodzaj materiału opakowaniowego: powszechnie używane materiały termozgrzewalne. Wyposażenie maszyny: - zest ...
grinding length: 1.000 mm grinding width: 600 mm workpiece height: 400 mm Control: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mm travel cross (z-axis): 540 mm distance table surface - grinding spindle centre: max. 600 mm Travel vertical (Y-axis): 500 mm Max. working height on new grinding wheel: 400 mm workpiece table: : Electro permanent magnetic plate: 800 x 500 mm pole pitch: 18 mm clamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/min Electromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mm measuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mm El ...
Clamping plate, welding table, welding table, straightening plate -Width: 1510 mm -Length: 1510 mm -Height: 695 mm -Surface: good -Holes: Ø 50 mm -Sheet thickness: 125 mm -bench vice -Transport dimensions: 1540/1770/H1030 mm -Weight: 1650 kg
Clamping plate, welding table, welding table, straightening plate -Width: 710 mm -Length: 1010 mm -Height: 840 mm -Surface: milled -partially with threaded holes -Sheet thickness: 65 mm -Massive -Weight: 410 kg
Dear Ladies and Gentlemen, We have the following Oil Transformers in stock Description: Type : Oil Transformer Finish : Hermetic Make :P AUWELS Year of construction : 2001 Condition : Used Inspected Rated power : 2000 KVA Medium voltage : 20 KV + 4 x 2.5 % Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Dimension Length 205 cm Width 114 cm Height 205 cm Weight 5290 KG Other powers and voltages also available from 100 KVA to 5000 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available for further questions Mon to Sat 8 a.m. to 10 p.m.
grinding length: - mm grinding width: - mm workpiece height: - mm workpiece diameter: - mm material thickness: - mm centre distance: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m No. 4104 Throughfeed grinding / deburring machine LINEAR ABRASIVE Isolde The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 1,25 - DP 20,3 - EW 30° - HBR=150 - ID-Nr. 69601_01 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com ...
Clamping plate, welding table, welding table, straightening plate -Width: 745 mm -Length: 1100 mm -Height: 845 mm -partly with threaded holes -Plate thickness: 15 mm -with supporting ribs -Weight: 140 kg
Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1000 mm -Height: 780 mm -Surface: milled -partly with threaded holes -Plate thickness: 25 mm -with supporting ribs -Weight: 214 kg
ABA Grinding Machine Starline CNC Profile Grinding Machine Surface Grinding Machine Hersteller [manufacturer]: ABA ELB Type [ type]: Starline Control unit: Siemens Sinumerik Incl. handwheel Baujahr[construction year]: 10/2004 Weight [weight]: 6000kg Approx. (W x D x H): 4.1m x 5.1m x 2.5m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Phone +49 17621834834
Clamping plate, welding table, welding table, straightening plate -Width: 1760 mm -Length: 2400 mm -Height: 840 mm -partly with threaded holes -Plate thickness: 50 mm -with supporting ribs -Transport dimensions: 1760/2400/H840 mm -Weight: 2000 kg
Clamping plate, welding table, welding table, straightening plate -Width: 1755 mm -Length: 2410 mm -Height: 845 mm -partly with threaded holes -Plate thickness: 35 mm -with supporting ribs -with vice -Transport dimensions: 1800/2560/H1000 mm -Weight: 2000 kg
approx. 17 kw/23 hp 2-cylinder diesel engine, water-cooled, complete engine with starter, alternator and gear hydraulic pump. Also available: Isuzu 3 AB 1 – B 02, 3 cyl., 25 kw/34 hp as well as various parts ex Isuzu 3 KC1 Diesel engines 1-6 cyl., various makes: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Output from 4.5 – 100 kw, used, partly as good as new.
Clamping plate, welding table, welding table, straightening plate -Width: 995 mm -Length: 1000 mm -Height: 800 mm -with supporting ribs -Weight: 170 kg
Clamping plate, welding table, welding table, straightening plate -Width: 1210 mm -Length: 4000 mm -Height: 830 mm -Sheet thickness: 30 mm -with steel frame -Number: 2x plates available -Price: per piece -Weight: 1400 kg/piece
Clamping plate, welding table, welding table, straightening plate -Width: 1510 mm -Length: 3490 mm -Height: 790 mm -Sheet thickness: 25 mm -with supporting ribs -Weight: 2700 kg
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 DP max. 7,8 - EW 20° - HBR=600 - ID-Nr. 69621_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.co ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 2-6 - DP 12,4 - EW 20° - HBR=2.500 - ID-Nr. 69629_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 DP max. 7,8 - EW 20° - HBR=1200 - ID-Nr. 69234_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.c ...
Clamping plate, welding table, welding table, straightening plate -Diameter: 1600 mm -Height: 900 mm -Sheet thickness: 30 mm -with steel frame -with vise -Transport dimensions: 2140/1610/H900 mm -Weight: 620 kg
Clamping plate, welding table, welding table, straightening plate, construction table -Width: 1840 mm -Length: 5200 mm -Height: 850 mm -Sheet thickness: 28 mm -with supporting ribs -Weight: 2400 kg
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 - DP max. 8 - EW 20° - HBR=1200 - ID-Nr. 69693_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.c ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 2,5 - DP 10,2 - EW 20° - HBR=1000 - ID-Nr. 69631_01 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 - EW 20° - HBR=300 - ID-Nr. 69604_2 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free vers ...
Flange bearing -Bore: Ø 20 mm -Mounting hole: Ø 12 mm -Bore distance: 64 mm -Dimensions: 130/130/H50 mm -Number: 16x available -Price: per piece -Weight each: 1.7 kg
Three-phase motor, electric motor -Power: 0.25 kW -Speed: 870 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 270/155/H190 mm -Weight: 8.1 kg
three-phase motor, electric motor -Power: 2.2 kW -Speed: 930 rpm -Shaft: Ø 28 mm -Design: B3 -Protection class: IP 44 -Brake: 220 Volt -Quantity: 1 piece available -Dimensions: 470/270/H205 mm -Weight: 39 kg
quantity: 2 STK Diamant Abrichtscheibe Modul 1,5 - 3 - EW 15° - HBR=300 - ID-Nr. 69604_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data for thi ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 - DP max. 8 - EW 20° - HBR=600 - ID-Nr. 69711_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.co ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 - EW 20° - HBR=1200 - ID-Nr. 69004_2 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free ver ...
maximum number of results exceeded
please refine your search
