ab used for sale

ABB IRB140 with S4C+ controller

ABB IRB1600 with IRC5 control

Axles: 6 Control: S3 Type: M92 Load: 30 kg Range: 1080 mm Accessories: handheld programming device Attention: without cable Condition: This robot only as spare parts support is available due to his age. The industrial robot has works fine up to the disassembly.

-only control (Similar to Fig.) This control only as spare parts carrier is sold due to age. Axles: 6 Control: S4 Type: IRB1400 M94A Load: 5 kg range: 1440 mm Accessories: manual control unit, set of cables Condition: Used, good condition. This control only as spare parts carrier is sold due to age.

ABEGG Ventilatore ZIEHL. noch nie benutzt NEW 4 PCs.

Turbocharger from a Jenbacher 312 Manufacturer: ABB, RR131-14 Used Can we create a range of overhaul.

System: piston diaphragm pump Manufacturer: Abel Type: FDG 322 Machine number: 3506 Year of construction: 1989 Performance: 15 m3 Pressure: 15 bar Engine: BBC, 11 kW, 50 Hz

System: piston diaphragm pump Manufacturer: Abel Type: CM G E272 Manufacturer no.: 10074 Construction year: 2013 Performance: 15 m3/h Pressure: 1.00 MPa Motor: 7,5 kW, 50 Hz

System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa

with NC round table WALTER 1000 mm, see pictures

Axles: 6 Control: IRC5 type: M2004 Load: 180 kg Distance: 2550 mm Year of construction: 2011 Condition: Used, removed functional from the production

Dear's Sale, T/C complate ABB TPS 57 Recon, Good condition Regards +905323642509 info@kscege

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...

Danoflex Ø 800 mm cylindrical abrasive grinding

Danoflex Ø 800 mm cylindrical abrasive grinding Max sandingwidth: 800 mm Main motor(s) power : 4.5 kW

Manufacturer: ABB 560 kw Motors — Vaasa, Finland Model: M3BP 315S K4 A V3 Serial No.: TE262741-1 Production Code: 308P315S0-BUQWH-3641B CE Compliant Voltage 690 V Current 575 A Frequency 50 Hz Speed 1491 rpm Power Output 560 kW Power Factor (cos φ) 0.86 Efficiency (η) 94.1 % Duty Type S1 (continuous) Insulation Class F Enclosure Protection IP55 Mounting Type V3 (vertical mounting, flange) Bearing Type 6322/C3 (DE) & 6316/C3 (NDE) Regreasing Interval Depends on load: 4,200–10,500 hours Weight ≈ 2600 kg (typical for this model) Manufacturing Standard IEC 60034 Brand-new, never-used electric motor. Suitable for standard applications as well as port operations.

Digestorium exhaust system for pharmacies, chemistry and medicine -Interior dimensions: 540/850 / H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge -Connection: 0.085 kW -Type suction: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg

NEW UNUSED TURBOCHARGER ABB Type TPL77 - B12

used drainage facility chamber filter press / filter press REWA 500x500 record size: 500 x 500 mms chamber number: 25 pieces cake thickness: 30 mms and used high pressure piston - membrane pump Abel conveyor achievement: 6 m? / h conveyor pressure: 15 cash

used pistons - membrane pump Abel CM-G-H-272 conveyor achievement: 15 m? / h conveyor pressure: 15 cash general-outdated!

Different fan types and models

ABB Arc Guard TVOC-2-240 Arc Flash Guard COMPLETE SET Built 2012 The new retail value for these parts is Euro 8500,- Like new, only been used for 3 years. 6x complete set available. -- TVOC-2-240 - ABB TVOC-2-240, ARC MONITOR W/HMI, 100-240VAC/DC The Arc Guard TVOC-2 builds on the well-appreciated TVOC design and offers unmatched arc monitoring. With over 35 years of experience, Arc Guard System has become an industry standard in several key markets, helping to protect personnel and businesses around the world. The TVOC-2 is an optical detection system that together with an external breaker can limit the damage done to personnel and equipment in case of an arc accident happening. Main benefits Increased safety to personnel and equipment Minimizes downtime after arc accident has happened Easy-to-read interface makes reading status information quick and easy Simp ...

HAVE A GDY SIR; WE VE 4 PCS ABB SYNPOL D COMPLETE INDUSTRIAL CONTROL SYSTEM . PLS FIND DETAILS FOR EACH COMPLETE UNIT ON BELOW.. --- ABB CMA 130 6348 --- ABB CMA 130 3741 ABB CMA 127 1243 ABB CMA 126 1538 ABB CMA 125 1508 ABB CMA 124 1524 ABB CMA 123 1542 ABB CMA 122 1535 ABB CMA 121 1486 ABB CMA 120 293 --- ABB CMA 130 622 ABB CMA 126 678 ABB CMA 125 656 ABB CMA 124 643 ABB CMA 123 672 ABB CMA 122 677 ABB CMA 121 654 ABB CMA 120 663 --- ABB CMA 130 661 ABB CMA 126 673 ABB CMA 125 651 ABB CMA 124 638 ABB CMA 123 667 ABB CMA 122 672 ABB CMA 121 649 ABB CMA 120 658 IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .. Capt. Ayhan Ugurluba Be ...

used pistons - membrane pump Abel CM-G-H272 conveyor achievement: 15 m? / h conveyor pressure: 2 cash engine: 3 kW, 400 V, 50 hertz, 1500 rpm,

used pistons - membrane pump Abel CM-G-H272 conveyor achievement: 15 m? / h conveyor pressure: 15 cash engine: 11 kW, 400 V, 50 hertz, 1500 rpm,

used pistons - membrane pump Abel CM-G-C262 conveyor achievement: 12 m? / h conveyor pressure: 15 cash engine: 7.5 kW, 400 V, 50 hertz, 1500 rpm,

FOR SALE NEW UNUSED ABB VTR 254-11 COMPLETE TURBO CHARGER IN WOODEN BOX. TO WHOM IT MAY CONCERN; WE VE NEW UNUSED ORIGINAL ABB VTR 254-11 COMPLETE TURBO CHARGER WITH ORIGINAL PACKAGE IN WOODEN BOX AT OUR STOCK. PLS FIND SPECT AT BELOW.. TYPE VTR254-11 HT 841632 t Mmax 680 C t Bmax 650 C N Mmax 523 N Bmax 497 SFUS01 YOB 2015 WEIGHT 650KG EX OWNER SUPLIED FROM WARTSILA. MADE IN SWITZERLAND. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

used pistons - membrane pump Abel CM-G-C262 conveyor achievement: 12 m? / h conveyor pressure: 15 cash engine: 7.5 kW, 400 V, 50 hertz, 1500 rpm,

used pistons - membrane pump Abel CM-G-H-272 conveyor achievement: 15 m? / h conveyor pressure: 15 cash engine: 11 kW, 400 V, 50 hertz, 1500 rpm,

used hydraulics - membrane pump Abel HMD-G-32-0250 long construction method construction year: In 2003 conveyor achievement: max. 20 m? / h conveyor pressure: 15 cash - with foreign fan the pump is steered about Frequenzumformer.

Anew ex works! Hydraulics - membrane pump Abel HMD-G-80-1000 long construction method conveyor achievement: max. 80 m? / h conveyor pressure: 15 cash engine: 45 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.

used hydraulics - membrane pump Abel HMD-G-50-500 long construction method conveyor achievement: max. 50 m? / h conveyor pressure: 15 cash engine: 30 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan

Alzmetall AB4SJ Tool holder MK4 automatic feed with 3 feed speeds 2 shoot stages and infinitely variable speed control right left barrel, thread cutting device Cooling agent device in the foot Round table with holes without rev counter Machine hood modern made of plastic with cracks and loechers Speed: 80-710 rpm Table diameter: 450 mm Max distance from spindle to foot: 1200 mm Extension to center spindle: 170 mm Machine hoe approx. 200 cm Bt323s8 SPECIAL PRICE due to visually poor condition according to photos, technically usable condition, the drill is not locked at the shaft drill spindle tool holder in the rotational motion (see photos). If the drill is not firmly in the drill spindle, it rotates through. Special price

used hydraulics - membrane pump Abel HMD-G-80-1000 compact construction method conveyor achievement: max. 80 m? / h conveyor pressure: 15 cash engine: 45 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.

type mechanic: IRB 6400 2.4-120 M97 type Control: S4C max. load: 120 kg workingrange: 2400 mm net weight: 1870 kg functional checked!

FOR SALE... OVERHAULED TURBOCHARGERS ABB VTR 254-11 & BBC VTR 214-11 TO WHOM IT MAY CONCERN; WE VE BELOW LISTED OVERHAULED & REPORTED TURBO CHARGERS AT OUR STOCK. READY TO TRANSPORT AND USE... ABB VTR 254-11 HZTL 428765P2 nNmax 523 nBmax 497 tMmax 680 C tBmax-650 C SFUSO1 YEAR OF BUILT 2010 MADE IN SWITZEWRLAND BBC VTR 214-11 NoHT 399285 their 635 Tmax 680 V 01113 R 012 H 04109 W 12206 E 03221 U 023 YEAR OF BUILT 2012 MADE IN SWITZERLAND IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CIONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

used hydraulics - membrane pump Abel HMD-G-50-0500 compact construction method conveyor achievement: max. 50 m? / h conveyor pressure: 15 cash engine: 30 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.

Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Description: Design : Casting resin transformer Design: Dry Make : SGB Built: 2010 Condition : new Rated power: 1000 KVA Overvoltage: 10 KV +- 2 x 2.5% Undervoltage: 400 V Switching group: Dd6y 5 Frequency: 50 Hz Cooling type: AN Total weight: 2410 Kg If you have any questions don't hesitate to ask. Yours sincerely / Best regards Mr. Serhan Managing Director - Owner Company M&S EXPORT Lippstadt Ostenfeldmark 17 Industrial estate on the moonlight 59557 Lippstadt Owner: M. Mousa Serhan Turnover Tax No.: DE 255543367 Phone: 02941 / 96 77 818 Fax: 02941 / 96 77 832 Mobile: 0172 / 72 653 24 Email: Transformatoren@gmx.de

used hydraulics - membrane pump Abel HMD-G-32-0250 long construction method conveyor achievement: max. 30 m? / h conveyor pressure: 15 cash engine: 18.5 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer. the pump is complete with electric control.

ABB electric motor System: electric motor Condition: pre-owned Manufacturer: ABB Product code: 3GJP181410-ADG Year of construction: 2008 IP: 55 KW: 22 Speed: 2938/RPM HZ: 50 Weight: 200 kg

In very good condition

Ready to ship

used hydraulics - membrane pump Abel HMD-G-32-0250 long construction method conveyor achievement: max. 30 m? / h conveyor pressure: 15 cash engine: 18.5 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer. the pump is complete with electric control.

Suction with electric motor,intake opening D=150mm, blow-out D=115mm, motor 0.6KW

Ready to ship

Acceptance bunker 3,550 x 6000 x H 1,560 mm, for bulk solids, with 3 dosing screws Universally applicable acceptance bunker for bulk material e.g. grains, wood chips, potatoes, waste... Conveying volume depending on bulk material 1 - 80 m3/h The pick-up bunker is filled from above on a easily accessible side of the acceptance bunker by means of a shovel loader. The access roads and exclusion zones must be marked in order to avoid accidents and damage to the bunker and its extensions by starting up. The three parallel, identical and directly driven snail trees transport the goods through a partition wall to a cross-arranged snail tree. The partition wall prevents the conveyed material from flowing back into the acceptance area. The product is transferred to the connected trough screw conveyor (TS 420 x 7,000) by the frequency inverter-controlled cross-screw, which is desig ...

Suction wall with exhaust air unit, supply air unit, supply air filter, hot water heating register Suction wall: Make : Krautzberger, built 1992 Dimensions: 2.2 x 3.0 x 0.8 m (approx. BxHxT) Fan: 9,240 m3/h suction power, 2 kW Ex Supply air filter, supply fan, WW heater register: Make : Wolf, built 1999 Fan: 10,000 m3/h suction power, 9 kW Heater: 56 kW, 120 degrees C, 3,500 m3/h Pipeline : supply and exhaust air ducts, deflector hood We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

used hydraulics - membrane pump Abel HMD-G-50-500 long construction method conveyor achievement: max. 50 m? / h conveyor pressure: 15 cash engine: 30 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.