129,528 used machines on RESALE, but how to find them? Machine Search
R02 spot welding cell A. ABB Robots - Type: IRB6640-180/2.55 - RobotWare Version: 5.14.2039.02 - External Axis ABB: No - Year of Fabrication: 2010 - Operation Hours: 68,685 hours (both robots) Equipped with standard industry communication protocols suitable for integration with existing automation systems B. Expert Tuenkers Turntable - Type: EXD960/0045/2 - Gearmotor Type: KHF87 DRS112 M8/4 BE5 HR/TF C. Albany Door Find more here - / Contact us at -
Machine name: Macerator shredder Manufacturer: Allweiler Type: ABM20I-1 Year of Make: 1991 Speed: 1440 rpm Material: Steel Dimensions: L 910 mm x W 370 mm x H 730 mm Condition: Used Price: On request
arm length: 2500 mm total column height: 3100 mmm weight max. in kg: 125 kg swivelling range: 180 Grad Electric 380 Volt: Hnad control: We have no documentation of this crane so we sell with a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 295 mm -Length: 496 mm -Height: 95 mm -Plate thickness: 30 mm -with: support ribs -Weight: 30 kg
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 180 mm -Plate thickness: 25 mm -with: support ribs -Weight: 90 kg
Three-phase motor, electric motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP44 -Number: 1x available -Price: per piece -Dimensions: 520/300/H245 mm -Weight: 48 kg
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 503 mm -Length: 795 mm -Height: 102 mm -Plate thickness: 20 mm -with: support ribs -Weight: 75 kg
Machine Name: High Pressure Pump Manufacturer: Abel Type: HP-K-25-56 Year of Make: 2012 Degree of protection: IP 55 Speed: 1480 rpm Operating voltage: 4009 / 690 V Flanges: DN 80 Frequency: 50 Hz Delivery pressure: 100 bar Material: Steel Drive motor: 55 kW Flow rate: 14,400 l/h Dimensions: Approx. L 1600 x W 1400 x H 1600 mm Curb weight: 1500 kg Technical documentation: No Condition: Used Price: On request
Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1295 mm -Height: 910 mm -Plate thickness: 28 mm -Wall thickness underframe: 5 mm -Transport dimensions: 1450/1000/H1100 mm -Weight: 570 kg
Geared motor, electric motor, electric geared motor -Speed: 3.55 rpm -Power: 0.55 kW -Shaft diameter: Ø 50 mm -Design: B5 -Protection class: IP 54/55 -Number: 3x motors available -Price: per piece -Dimensions: 630/300/H270 mm -Weight: 62 kg
geared motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54/55 -Number: 1x motor available Price: per piece -Dimensions: 550/250/H280 mm -Weight: 40 kg
Machine Name: High Pressure Pump Manufacturer: Abel Type: HP-K-25-56 Year of Make: 2004 Delivery pressure: 100 bar Material: Steel Drive motor: 55 kW Flow rate: 14,400 L/h Dimensions: L 2,000 x W 1,000 x H 1,000 mm Curb weight: 1,500 kg Tech. Documentation: Yes Condition: Used Price: On request
Gear motor, electric motor, electric gear motor -Speed: 22 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: 35 mm -Protection class: -Quantity: 1x engine available -Dimensions: 620/212/H270mm -Weight: 44 kg
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 400 mm -Length: 502 mm -Height: 120 mm -Plate thickness: 28 mm -with: support ribs -Weight: 50 kg
Clamping plate, welding table, welding table, straightening plate, workbench, work table -Diameter: 700 mm -Height: 810 mm adjustable -Sheet thickness: 19 mm -Number: 1 table available -Price: per piece -Weight: 88 kg/piece
MIG/MAG hose package -Length: 3 m -Euro plug -Water cooled -with integrated suction hose -Number: 2x hose packages available -Price: per piece -Weight: 3 kg
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, alignment plate -Width: 2245 mm -Length: 2500 mm -Height: 780 mm -Plate thickness: 25 mm -with: supporting ribs -Weight: 2720 kg
Collet collet sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 27 pieces adapter sleeves -different sizes: 3.5-16 mm -Only for sale as a package -Weight: 4 kg
Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Number: 1x recordings Manufacturer: Komet -partially with internal water cooling -Weight: 12 kg
Circuit breaker, switch, push button -Type: 3NJ6 010 -In 125 A -Weight: 6.2 kg
Terminal box, aluminum housing, housing systems, Klippon -Type: AB812027 -Size: 95/83/H35 mm -Price: per piece -Number: 4x available -Weight: 0.3 kg
Frequency converters, frequency converters, drive converters, controllers, variable speed drives, servo drives -Manufacturer: ABB, frequency converter type ACS101-K25-1 -Operator panel: ABB ACS100-PAN -Input: 200-240 VAC 50 / 60Hz -Output: 0 ... 300 Hz 1.4A -Dimension box: 200/180 / H100 mm -Weight: 1 kg
fixed point, fixed center point, fixed morse taper, fixed centering point, centering points -Manufacturer: WMW ABW, fixed center point -Adjustment: Morse taper MK5 -Number: 9x center points available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg / pc.
bore diameter: 65 mm throat: 380 mm Control: PLC-Steuerung bore spindle turning speed range: 63 - 1600 U/min table-size: 630 x 500 mm rapid traverse Z-axis: 4,75 m/min boring feeds:: 0,05 - 0,56 mm/U total power requirement: 9 kW weight of the machine ca.: 2,0 t dimensions of the machine ca.: 1,50 x 1,20 x 2,95 m Drilling capacity in steel ST60: 65 mm Drilling capacity in cast iron GG20: 80 mm Thread cutting ST60: M68 Thread cutting GG M72 SPS-controlled automatic drilling machine with Drilling/deep hole drilling/thread cutting Sequence: 1st rapid traverse to start position 2. switch on the speed 3. switch on the drilling feed 4. drilling until the drilling depth is reached 5. return in rapid traverse to start position Manual operation possible (speed and direction of rotation, rapid traverse positioning, Switching the drill feed on/off) Selection of the drill feeds and spindle speed man ...
VA-04. Gas Drying – Absorber Systems (T610 Partial system, 2 absorber tanks, functional, Built: 1990 Complete system (control, etc.), cleaned System Manufacturer: DSD Dillinger Stahlbau GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 1.6m; Length approx. 6.9m; Mass 19.0 t; Volume 9000 l Find more here - / Contact us at -
Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW ABW, tapping chuck holder MK2 with 5 pieces of holders -Type: GB2 M5 - M16 -Dimension: O 62 x 192 mm -Weight: 1.8 kg
face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver -Type: MS6 -Mount: MK6 / M42, see photos -Total dimensions: Ø 108 x 278 mm -Weight: 7.9 kg
TO WHOM IT MAY CONCERN; WE VE 2 PCS USED REPORTED EXHAUST GAS TURBOCHARGER ABB TPL65 - A30 AT STOCK PLS FIND DETAILS ON BELOW TYPE TPL 65-A30 HT 466933. &. 400485 N MAX 498. TMAX 680 nMAX 473. 650 C PLS FIND SERVICE REPORT ON FILES SECTIONS
Technical specification, ZZS A1, FEATURE VALUE, POWER 17 KW, LENGTH 2000mm, WIDTH 1250mm, HEIGHT 4180mm, WEIGHT 700kg, zigzag separator, The Zig Zag Separator works based on weight differences. This highly efficient separator uses airflow to separate materials by weight. The zigzag design extends the falling path of the materials, providing a more homogeneous and accurate separation process. It is ideal for separating materials such as plastics and light metals from scrap metal. Our machine is designed to be integrated into production lines and offers maximum performance with low energy consumption. In addition, its compact design allows it to operate in a minimal space. The Zig Zag Separator offers an environmentally friendly solution with high efficiency and low running costs that optimizes your recycling process.
Geared motor, electric motor, electric geared motor -Manufacturer: ABI, Geared motor type WDF271x -Speed: 25 rpm / i=1:59 -Power: 0.12 kW -Shaft: Ø 20 x 20 mm -Protection rating: IP55 -Dimensions: 310/165/H185 mm -Weight: 9.5 kg
fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point -Intake: Morse taper MK4 -Number: 17x centering tips available -Price per piece -Dimension: Ø 33/160 mm -Weight: 0.8 kg/pc.
fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point flattened -Intake: Morse taper MK5 -Number: 1x centering tips available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.8 kg/pc.
TO WHOM IT MAY CONCERN; WE VE 2 PCS USED REPORTED EXHAUST GAS TURBOCHARGERS ABB TPS 57 - D01 AT STOCK PLS FIND DETAILS ON BELOW TYPE TPL 57-D01 HT 466584 & 466585 N MAX 718 TMAX 650 nMAX 682 620 PLS FIND SERVICE REPORT ON FILES SECTIONS IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY
fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point -Intake: Morse taper MK3 -Number: 12x centering tips available -Price per piece -Dimension: Ø 25/125 mm -Weight: 0.3 kg/pc.
live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: WMW ABW Live center -Type: ZN 203 -Intake: MK3 -Number: 11x center point available -Price per piece -Total dimensions: Ø 54 x 167 mm -Weight: 0.9 kg/pc.
maximum number of results exceeded
please refine your search
