used Mills for sale

Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the ...

Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide wit ...

Fully refurbished Hosokawa Alpine CW 250 used machine by Alpine Originals. The pin mill Hosokawa Alpine Contraplex CW fitted with two driven contrarotating discs. It is used to grind soft materials, even with high fat or humidity content. It allows also the processing of certain flexible materials or those that can´t lose their properties during comminution in cryogenic mode using liquid nitrogen (LN2) freezing them. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 40 to 500 micrometer (µm) t ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used fine impact mill Hosokawa Alpine Contraplex CW 250 pin mill. The Contraplex pin mill is fitted with two contrarotating pin discs achieving high relative speeds, allowing it to reach finer end products than our traditional universal mill type UPZ. This grinder is suitable to comminute many different products for all kind of industries, like chemicals, food, pharma, etc. Material ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used fine impact mill Hosokawa Alpine Contraplex CW 400 pin mill. The Contraplex pin mill is fitted with two contrarotating pin discs achieving high relative speeds, allowing it to reach finer end products than our traditional universal mill type UPZ. This grinder is suitable to comminute many different products for all kind of industries, like chemicals, food, pharma, etc. Material ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine AFG-R 200 fluidised bed classifier jet mill system. The AFG-R is a special variant of the standard AFG where one nozzle is placed vertically pointing upwards on the bottom of the grinding chamber to elevate all the material in the fluidised bed to the jets meeting point, specially interesting for heavy and difficult to grind materials. This machine is specially  ...

Rental unit, not for sale. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in Pharma design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for R&D and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and ...

Used agitated ball mill Hosokawa Alpine PV 800 Pulvis Scope of supply: Pulvis grinding system including gas distributor, feeding screw, flap valve, classifier mill Pulvis PV 800 with TTD 315 classifier head, mill motor 37kW, classifier motor 45kW, filter, flap valve, blower and switch cabinet. Technical details: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation. Normal steel with wear protection - ceramic (mill only) A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant W ...

Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nit ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coars ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 40/63. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 28/40. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 28/60. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

Used Hosokawa Alpine Rotoplex RO 36/60 cutting mill. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 36/60. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycli ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 40/63. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 40/63. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or p ...

Fully refurbished Hosokawa Alpine UPZ 315 used machine by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulu ...

Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mi ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used universal fine impact mill Hosokawa Alpine 250 UPZ. This turbo mill is able to pre-cut and produce medium to fine products. Can be fitted with different grinding tools in order to adapt to each specific grinding needs. This mill is suitable to process many different products for all kind of industries, like minerals, chemicals, food, etc. Material of construction - product con ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used universal fine impact mill Hosokawa Alpine 315 UPZ. This turbo mill is able to pre-cut and produce medium fine products. Can be fitted with different grinding tools in order to adapt to each specific grinding needs. This mill is suitable to process many different products for all kind of industries, like minerals, chemicals, food, etc. Material of construction: stainless steel  ...

Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...

Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The demonstration unit has so far only been used at trade fairs and for demonstrations. The machine is therefore as good as new. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without vacuum cleaner) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 2 ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Bexmill A BM is a basket type mill or conical mill that can process soft to medium-hard substances. The gentle communition ensures the required particle size is obtained in one pass avoiding product damage and generating a minimum amount of fines. It can be operated both continuously and batchwise. A variety of screens are available in different shapes and opening sizes, they can be quickly exchanged without the use of tools to adapt to the desired task ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant With the Bexmill A BM soft to medium-hard substances are crushed gently. The Bexmill is also called basket type mill or conical mill. The mill can be charged both, continuously and discontinuously. From the feed unit the material to be crushed reaches the grinding area. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Used Hosokawa Alpine ACM 30 classifier mill, in normal steel, NPSR, non ATEX. Consisting of complete mill with motors Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindric ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery This used wet agitated ball mill Alpine 132 AHM has been used in recent years as an exhibition machine and demo machine for customer trials. The machine is in excellent condition and is sold with many accessories. Due to its size it´s perfect for lab scale production and R&D tests. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close ci ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery This used Alpine wet agitated ball mill 90 AHM has been used in recent years as an exhibition machine and demo machine for customer trials. The machine is in excellent condition and is sold with many accessories. Due to its size it´s perfect for lab scale production and R&D tests. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close cir ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant New mill never used, in former design. ACM 40 EC Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindrical classifying wheels. • Cool and gentle grinding thanks to high air fl ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Description This is a long gap mill type LGM 4, which can be used for grinding and drying. Origin and Condition The long gap mill was used for several years in our pilot plant as an experimental machine. During this time various products were ground and dried. Technical data Drive power: 18,5 - 55 kW Air volume: 2500 Nm³/h Evaporation capacity: 120 kg/h

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Classifier jet mill Hosokawa Alpine 630 TFG specifically designed for toner grinding, can be used together with the Alpine 250 TTSP air classifier to produce the perfect product. Design: non PSR Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Wear protection: without Scope: 630 TFG with 18,5kW motor, process gas distributor, rotary valve, filter, rotary valve, blower, control cabinet

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, gr ...

Three-roller Manufacturer: Joseph Vögele AG Type: PW 3103 Item #: 713345 Year of construction: 1965 LWH: 550 x 850 x 1200

Perforated disc mill Manufacturer: Karl Schnell Type: 062-F28-248 N°: 42686 Power: 21 kW with funnel and discharge chute Control cabinet with on-off button Plug connection Diameter perforated disc: 6 mm Cutting knives as good as new LWH: 1000 x 900 x 1670 mm Weight: approx. 500 kg

Perforated disc mill Manufacturer: Karl Schnell Type: 080 F 248 N°: 42942 Power: 55 kW with funnel and connector Diameter perforated disc: 6 mm Cutting knives as good as new LWH: 1000 x 900 x 1550 mm Weight: approx. 600 kg

Unused pearl mill made by KOFAMA, model MS-25 Ex

Processing plant Manufacturer: Koruma Type: Disho Lab-15 Machine no.: 6023 Year of construction: 2000 very good condition with scraper mixer with control cabinet & touch panel Container lid swiveling LWH: 1500 x 900 x 1600 mm

Corundum disc mill Manufacturer: Koruma Type: T-3 Item #: 564 Year of construction: 1974 Power: 13 kW very good condition with funnel with outlet chute (coolable) with cable & plug LBH: 700 x 500 x 1350

Laboratory mill: Coarse grist mill MIAG from HINZ, Braunschweig Adjustable conical grinder ø 60 mm Drive 0,22kW - 1300 1/min, hinged for quick cleaning, with outlet tank Very solid, older model, can be used immediately

Hammer mill Mikropul Cologne Type 3SCB Serial number: 610098002 Year of construction: 1979 Electric motor 30 to 75 Kw can be used Height: 1200 mm Width: 1200 mm Depth: 1000 mm Inlet: 170 mm x 170 mm Outlet diameter: approx. 500 mm Roller: 400 mm x 350 mm Changes and errors in the technical data, data and prices as well as intermediate sale reserved.

Manufacturer: Mineralwerke Type: PZ 250 M4 Voltage: 380 V Power: 55 kW Weight: 1950 kg

Qty. 1 Second-hand 4-Hi reversing rolling mill – Electrical equipment and cooling unit are not included! Mfc.: MINO Type: 4-Hi Reversing Mill LLQ500 Built: 1970 Revamped: 2011 by MINO Strip width: 420 mm Thickness: 0.2 – 4.0 mm Speed: 20 – 400 m/min. Coil weight: 8.0 T Coil: ID 500 mm Coil OD: 1800 mm Rolled material: Carbon steel (can be used for other applications too)

Molteni Pearl Mill MS.15 Explosion protected version Grinding tank 15 l Double jacket Power 17,5 kW Very good operational condition, directly from production!

Inlet opening: approx. 100 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knives: 2 Rotor blades: 3 Propulsion: 30 kW Feed opening: approx. 100 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knives: 2 Rotor knives: 3 Drive: 30 kW

Bead mill Manufacturer: Netzsch Type: LMK-4 Item no.: 840490 Year of construction: 2001 Volume: 6 l Operating pressure max.: 10 bar Operating temperature: max. 50 °C Engine power: 15 kW with operating instructions with various spare parts (grinding chamber, GLD, etc.) with control cabinet and control system Mill & control panel in EEx protection Ceramic grinding chamber with pressure gauge, temperature monitoring, barrier pressure station Machine in excellent condition LWH: 1200 x 600 x 1550 mm LWH control panel: 600 x 600 x 1750 mm

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...