used Folding box cartoning machines for sale

Used riser A+F AUTOMATION - Trays with round inlet - with NORDSON glue device Sightseeing and test run are possible by arrangement.

Used folding box cartoner from 1999 from the company BFB. Cartoner was in use until last year. A tour of the facility would be possible. Further information is available on request.

Intermittent motion cartoner for folding boxes. Machine incl. feeder for pre-folded leaflets, inkjet printer (year: 2005). Output: max. 75 cartons/min.

Bradman Lake X/S 2-60 carton erector Serial: 6088 0800 3 phase 16a plug

Vertical cartoning machine type VC! Compact rotary machine, capacity up to 40 folding cartons/min, plug-in closure. Machine is partially overhauled, i.e. completely new control cabinet, mechanically partially overhauled The following folding carton dimensions can be processed: Width: 20-80mm Depth: 15-60 mm Height: 60-200 mm The machine is set up to the customer's format(s) and delivered ready for use. The following additional facilities are possible: Brochure feeder, hot stamping No sales to dealers

Cartoning machine, new for immediate delivery, Format range: A 20 - 115 mm W 15 - 75 mm C 35 - 200 mm

Availability: as of now Condition: fully functional Performance/Speed: 40 cartons per minute Format sizes: see picture Gluing device: Nordson 3100-2EAV 2D/R This machine can be used to form boxes of various sizes from cut sheets of cardboard, gluing the edges of the formed box with hot glue sprayed with a gun. The FM80I moulder is equipped with a glue unit to close the bottom of the box.

DOUBLE LANES CARTON ERECTING MACHINE Can mount the same box on two strips at the same time German servo motor system German Siemens and Schneider electrical system PLC touch screen Glueing system with motor control Capability to work in different ways with plate Gathering system at delivery unit can be adjusted and connected according to job Voltage: 380V/50Hz Covering area: 4.0 1.4M The total power: 8Kw Maximum production speed: 400pcs/min Air pressure: 0.6Mpa (Dry and clean compressed air) Materials: Paper board 200-600gsm; corrugated board paper with thickness not exceed 1.5mm Blank length(L): 100mm – 450mm Blank length(B): 100mm – 450mm Height of side flaps(H): 15mm – 260mm Height of side flaps+lid(HI): 50mm – 260mm Conicity: 5°-40°

Dong Sung folder gluer Typ: 1FG-400 Farmacutical Age: 2002 Straightline 1 point gluing Barcode reader Free of damages. Available immediately

Carton erector Connection values: 400 V / 50 Hz / 3 Ph Rated current: 11 A Power: 3.7 kW Control voltage: 24 V Condition: fully functional Availability: as of now Machine dimensions (LxBxH): approx. 1950 x 1650 x 1960 mm

The type 221 fully automatic case erecting machines are designed to handle average sized cases in a wide variety of styles. The machines seal with either self-adhesive tape and are extremely simple to use. They are versatile, reliable and efficient. They also have a small footprint and offer great value for money. CASE DIMENSIONS The standard type 221 case erecting machines can handle cases between 200-500mm length, 150-400mm width and 175-600mm height. SPEED Up to 16 cases per minute Machine is ready for immediate use and available

Machine Length: 3150mm Machine Width: 1700mm Machine Height: 1200mm Machine Weight: Approx 0.5t MATERIALS All grades of Singlewall Corrugated up to 300 300 B/C Double Wall KEY BENEFITS Handles short runs economically Set up in 15 seconds 600 boxes per hour British designed and built

Continuous motion horizontal cartoning machine suitable for packing blisters in folding boxes. Machine incl. 90° blister feeder, booklet feeder from magazine, GUK-leaflet folder, type FA21/4 SVA/21, code reader LAETUS type Argus 6012, coding device, PLC SIEMENS type Simatic S7-300. Speed: Up to 260 cartons/min.

- Capacity: 2000 cartons/hour - With large cardboard magazine for great autonomy - Equipped with hot glue device - With twister at the exit to set up the boxes - Set up for many different carton formats - Machine in very good condition

- Capacity: 2000 cartons/hour - With large cardboard magazine for great autonomy - Equipped with hot glue device - With twister at the exit to set up the boxes - Set up for many different carton formats - Machine in very good condition

Sideloading cartoning machine for closing blister in corresponding folding cartons. Machine incl. GUK-leaflet folder, RONTECH booklet-feeder (built in 2015) etc. Cartoner is in line with the blister machine, type CP 400.

- Hourly output: up to 2000 cartons - With NORDSON hot melt device - Machine in good condition

Clocked running folding carton cartoning machine. System incl. blister feeder, coding device, bad ejection, vacuum pump, inline image recognition system,. Controller: SIEMENS, type Simatic S7-300. Capacity: up to 150 cartons/min. Intermittent motion cartoner for folding boxes. Machine incl. blister feeder, coding device, rejection of faulty products, vacuum pump, inline-image recognition system LAETUS, PLC: SIEMENS, type Simatic S7-300. Output: up to 150 cartons/min.

Used riser SCHÄFER & FLOTTMANN - with NORDSON glue device ProBlue 7 Further information on request. Sightseeing and test run are possible by arrangement.

Signature RotoBraille Age: 2015 With high speed ejection cameras for bad boxes (where Braille letter was not embossed correctly) Very nice condition- Free of damages and ready to go. Machine has pre-makeready table There are 8 top and 8 bottom drums- 4 with four lines and 4 with five lines. Detection system IN-sight.

TETRA PAK CARDBOARD PACKER MODEL TCBP70 VERSION 110 U-FORM YOM 2007 WRAP AROUND CAN BE COMPLETED BY THE TETRA SHRINK

Folding carton boarding machine Uhlmann C 100 LB • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Product feed for blister via blister stack shaft • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding carton code, 1x brochure absence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color Tuach Panel - Code reader Cognex - Validation documentation

Uhlmann C 130 horizontal cartoning machine - Fully automatic blister strip packaging and simultaneous feeding of package inserts - max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel 10-year spare parts procurement warranty Mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Cognex 1D Barcode and 2D Matrix Codes Reading System for Leaflet and Carton Code - Luminizens control, presence control for package inserts in folding boxes - Embossing station - Brochure insertion -Vacuum pump

Uhlmann C150 Horizontal Cartoning Machine Blister Packing, - Fully automatic blister packaging and simultaneous feeding of package inserts - max. output 150 FS/min - depending on product Folding carton format range: Min.: 30 x 15 x 70 mm, max: 100 x 85 x150 mm Brochure size: Min: 100 x 80 mm, Max. 210 x 300 mm - Operating voltage 400 V .- Connected load: 4 KW - GUK brochure folder 4-fold folding - PCE code reading - Luminizens control, presence control for package inserts in folding boxes - Embossing station - Brochure insertion - Venturi nozzle Mechanically overhauled Optional: - New hardware and software PLC Mitsubishi control and 8 inch color touch panel - Cognex 1D Barcode and 2D Matrix Codes Reading System for Leaflets and folding carton code -Remote maintenance - 10-year spare parts procurement warranty

Uhlmann C 100 horizontal cartoning machine -fully automatic blister Strip packaging and simultaneous feeding of leaflets -Max power 100 FS / min Format: L = 70 x 150 mm B = 30 x 100 mm H = 15 x 85 mm Accessories: -GUK leaflet folding apparatus 4 Pocket fold -Laetus Argus 6012 control unit for prospectus leaflets and folding box code -Luminizenskontrolle, presence control for leaflet in folded box -Switching to blister double stack -prolonged discharge conveyors for labelling area -Stamping station -Prospectus before insertion -Vacuum pump -4 point pad blister tray Overtaken by 2015

DESCRIPTION: • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Centrally adjustable cup chain • Product feed for blister via blister stack shaft • Monitoring of packaged goods height in cup chain • Code reading Laetus Argus 4 for 2x brochure code (front + back), 1x folding carton code, 1x brochure presence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with anti-ejection control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz

The machine is complete Light or low refurbishment required