Manufacturer:
(Category: 107-659)
Machine almost unused Pressure: 60.0 t Square steel: 35.0 mm Technical specifications Pressure: 60.0 t Square steel: 35.0 mm Angle steel: 120x120x12 mm Round steel: 40.0 mm Punching cross-section in sqmm: Ø28 in 15 / Ø38 in 11 mm Projection: 220 mm Flat steel: 200x20 / 300x15 mm Y0798Jol Knife length: 317 mm Oil capacity: 45.0 ltr. Working height: 940 / 1140 mm Stroke rates per minute: max. 26 Working stroke: 55.0 mm Total power requirement: 4.0 kW Machine weight approx.: 1425 kg. Dimensions HxWxD: 1510 x 590 x 1570 mm
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 951 €: 1 1/2 48,3 mm, 2 60,3 m mm: 3 mm: 2.5 mm: 15 kgThe AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2",) and 60.3 mm (2",).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 1032 €: 1 1/4 42,4, 1 1/2 48,3 mm: 3 mm: 2.5 mm: 15 kgThe AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 4955 €: 3/4 26,9 mm, 1 33,7 mm, mm: 5 mm: 3 mm: 87 kgThe motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",).Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution!The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5760 €: 111.17 €: 3/4 26,9 mm, 1 33,7 mm, mm: 5 mm: 3 mm: 93 kgThe motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",)and notch pipes with an external diameterof 22 mm to 76 mm for sink outflows.Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution!The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.The data for this ad was created ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 853 €: 20 - 76,1 mm: 3 mm: 2.5 mm: 7 kgThe ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm.Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment.ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 788 €: 3/4 26,9 mm, 1 33,7 mm, mm: 3 mm: 2.5 mm: 8 kgThe AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",).The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past.The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
