Bending Machines used for sale (63)

Technical data: 4 bending rolls Max bending range: 3,000 mm external switching and Control Panel, as well as counter holder

: neu : ca. 4 Wochen ab Auftragse : Italien : 15330 €: 294.34 €: 22 to: 200 mm: 150 x 10 mm: 1100 x 630 mm: 120 mm: 55 mm: 4,6 - 8 mm/s: 70 mm/s: 45 l: 1.5 kW: 925 mm: 1200 mm: 900 mm: 1050 mm: 630 kg2 holder pins, height 110 mm (higher ones on request)Manual stop 500 mm with millimeter scaleAdjustable speed2 handwheels for adjusting the stroke and retraction pointPrecise hydraulic stroke adjustment, even under pressureTwo-hand operationHuge range of tools, prices on requestALTERNATIVE:Version with CNC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 kNstroke length max.: 285 mmworking feed: 9 mm/secreturn speed: 20 mm/sec: 660x1250 mmwork height max.: 930 mmtoolpiece height max.: 250 mmtotal power requirement: 4 kW: 200x26 mmbending capacity max. - round: 60x5,0 mmDomestic equipments:- semi-automatic NC control (99 programs with 16 steps each)- incl. bending bolt (without punch)- Incl. tool holder for dies- incl. foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090089 : prompt, Zwischenverkauf v : Türkei : 8900 €: 171.77 €: 1 : 20 to: 185 mm: 200 x 12 mm: 480 x 1060 mm: 200 mm: 80 mm: 10 mm/s: 10 mm/s: 2.2 kW: 930 mm: 1150 mm: 480 mm: 1200 mm: 530 kgProgrammable stroke and retraction pointAdjustable speed and pressureManual jog operation and automatic operating modeHolding pins and tools hardened and ground3 holder pinsBending toolManual stop 400 mmFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 12900 €: 247.68 €: 40 to: 285 mm: 200x24 mm: 660x1250 mm: 250 mm: 80 mm: 10 mm/s: 10 mm/s: 4 kW: 930 mm: 1250 mm: 650 mm: 1250 mm: 1100 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 7300 €: 140.89 €: 10 to: 185 mm: 150x8 mm: 450x900 mm: 150 mm: 60 mm: 10 mm/s: 10 mm/s: 1.1 kW: 915 mm: 900 mm: 450 mm: 1130 mm: 250 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

consisting of three rollersWorking length: approx. 1500 mmReference: STS - Lot 6 Auction-ID: A7-49056-247

sheet width: 4200 mmplate thickness: 14 mmpre-bending: 10 mmroll diam. toproll: 340 mmroll diam. bottom roll: 310 mmspeed: - m/minControl: Davi CNC total power requirement: - kWweight of the machine ca.: 11 tdimensions of the machine ca.: 6,5 x 1,75 x 1,65 m- DAVI CNC control- pre-Bending- Hydraulic 4-roller drive- Side roll diameter: 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: max. 16 mmsquare edge steel: 16 mmround bar steel: 16 mmweight: 45 Kg: 180 °dimensions: 0,4 x 0,4 x 1,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 x 5 mmsquare edge steel: 16 x16 mmround bar steel: 18 mmL-beam: 100 x 8 mmdimensions: 400 x 290 x 280 mmweight: 35 KgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30 x 8 mmsquare edge steel: 12 mmround bar steel: 15 mmweight: 0,025 t: 51 x 31 x 22 cmdimensions: 135 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standard configuration? Stable machine frame as a welded, all-steel construction? Ram (press beam), highly resistant to torsional forces? Electrohydraulic downstroke drive via proportional valves? Modern block hydraulics? CNC backgauge with rack-and-pinion drive, for X and R axis, safe adjustment of stop fingers from the front? Modufix upper tool clamping system, manual? Lower tool holder for single-V dies, manual clamping, programmable shifting? Control system: 2D/3D graphic control, Delem DA 69 with 12 color screen (LCD)? Safety equipmentAdditional equipmentCrowning options ? CNC crowningBackgauge system options? 4-axis backgauge system ? 2 additional clip-on stop fingers Tool clamping and angle messuring system? Upper tool claming, hydraulic ? Lower tool clamping, hydraulic? ACB PreparationMaterial handling options? 2 front support brackets

sheet width: 2500 mmplate thickness: 30 mmpre-bending: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 2210015Type of machine Hydr. 3-roll bending machineMake HAUSLERType RMA 2500/30Build in 1962Type of control conventional Additional informationmax. widht 2500 mmMax. plate thickness 30 mm3 rollsdiameter upper oll 450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.