700 kw used for sale

Creasing & Perforating machine Kroll Model 700 Year 1960´s Working width 700 mm Tools some tools, but not worth mentioning Available direct

roll diameter: 700 mm roll length: 2200 mm rolls drilled: Kernbohrung Nip adjustment: hyraulisch 0 total power requirement: 160 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4

Renner piston compressor RIKO 700/270 ST KT Product name: Piston compressor Model: RIKO 700/270 ST-KT Manufacturer: RENNER Device Number: 1008851 Product number: 04837 Year of construction: 2021 Condition: As good as new technical details: Effective delivery quantity: 570 Container capacity: 270 Ltr. Intake capacity: 700 l/min Maximum pressure: 10 bar Sound pressure level LpA: 78 dB(A) Cylinders/steps: 2/2 Weight: 227 kg Temperature range: -10°C to +80°C 1 x pressure gauge tank pressure automatic pressure switch 1 x manual condensate drain by ball valve incl. refrigeration compressed air dryer RKT +0035 (refrigerant 134a) incl. automatic steam trap D03 for the compressor Stand-standing unit with rubber feet Engine data: Motor power: 4.0 KW Power supply: 400 V / 50 Hz Speed: 940 rpm Transport dimensions: L x W x H: 1,490 mm x 506 mm x 1,323  ...

Milling Machine MAHO MH 700 C CNC- 5 axis CNC- Phillips 432 X/Y/Z- 700/450/500 mm B axis CNC Universal table 820x480 mm 5th axis- CNC/NC dividing head ISO 40 spindle adapter Quill stroke of spindle 100 mm Universal table: -swiveling of the Horizontal X/Z axis 30 degrees -swiveling of the vertical Y axis 360 degrees Spindle speeds infinitely variable 20-3150 rpm

New bellows probably Maho 700 old version

Heraeus Vötsch Climate Test Chamber Here we offer you Heraeus Vötsch climate test chamber. Temperature Climate Test Chamber Air Cooled Standard: Touch panel and independent, adjustable temperature limiter 32 Bit S! MPAC control with touch panel Potential-free contact for test material shutdown Independent, adjustable temperature limiter tmin/tmax Psychrometric humidity measurement system Interface TCP/IP 1 pipe feedthrough 50 mm Refrigeration circuit air-cooled Coolant R23 & R404A Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity spatially ±0.5 to ±2.0 K Change speed heating 3.5 K/min Change speed cooling 2.5 K/min Services for climate tests: Humidity range 10 to 98% Test room dimensions: Width 470 mm Depth 345 mm Height 400 mm External dimensions: width 760 mm depth  ...

Storage tank for wine, beer, sparkling wine, water, fruit juices, oil etc. approx. 4.700 liters used – in very good condition Measurement and Weight: Total Height 2650 mm Cyl. Height: 2000 mm Diameter: 1750 mm Material: V2A - AISI 304, 1.4301 Surface: outside marbled 2B=IIIC Tank upper body: with hinged cover 50% with handle with thread connection DN 50 with 3 cran eyes Tank cylinder: with 2 x handle for mounting with thread connection DN 50 with butterfly valve DN 50 Lower bottom: with rest outlet with butterfly valve DN 50 drawn to the front with 3 calotte feet with variable height

suitable for thermal oil heating 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Storage tanks / transport tanks with cooling jacket made of V2A NEW TOTAL LIST Content: 700 litres, 900 litres, 1100 litres Cat-No.: Content Liter: 20-00009L-1 700 20-00009-2 900 20-00009-3 1100 Material: V2A - AISI 304, 1.4301 Surface: outside marbled III C Tank top: with 4 x crane eyelets with threaded welding nozzle DN 40 with thread DN 150 Tank cylinder: with manhole front 530 x 420 mm with cooling jacket Underbody: with residual drain DN 50 (disc valve DN 50 at extra charge) with 4 x feet

Murrelektronik Cable

Machine details 1105-02951 Machine type Machining Center - Vertical Make FAMUP Type MCX 700 P Built 1998 Control type Cnc Location Haguenau Origin Italy Delivery Right away Freight base EX WORK Technical details x-Way 700 mm y-way 500 mm z-way 640 mm Control FANUC OM Spindle speed 8000 rpm Spindle motor 22 kW Speeds x/y/z 40 mm/min Table size 600 x 450 x 2 mm Tool change time 1.5 sec Tool magazine: 30 SK 40 Total performance requirements 25 kW Machine weight approx. 5.5 t Information contrOL FANUC OM SPINDLE 22KW 8000 U/MIN spaenefoerderer

X-travel: 700 mm Y-travel: 550 mm Z-travel: 450 mm Control Heidenhain Atek HS Plus Spindle taper HSK 40E Spindle speed 42.000 rpm ATC 24 positions Clamping table 900 x 550 mm Weight of the machine ca. 6,5 t VIDEO: abcs://youtu.be/V4PdQu-AYcA

Code 0739 DESCRIPTION CNC Universal toolroom milling machine Make Maho Model MH 700 C S/N 75915 Year 1984 Control Philips CNC 432 Table 900 x 500 mm Longitude ( X – axis ) table 700 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) spindle 500 mm Spindle out ( H/V ) 100 mm Max. distance table / spindle horizontal 700 mm Max. distance spindle / table vertical 500 mm Spindle taper 40 ISO Speeds 20 – 3150 rpm Feeds X-Y-Z 1 – 3000 mm/min Rapides 6 m/min Spindle motor 8 kW - 380 Volts Accessories Table 900 x 500mm Condition Machine is in good condition

20121 - MARINE GEARBOX TK 600S - 571 HP AT 2100 RPM - RATIOS 1.97,2.53, 2.75,3.04, 3.42 Brand Gearbox TK Model Gearbox 600S-1 Ratio 1.97,2.53, 2.75,3.04, 3.42 Power 571 HP RPM 2100 RPM General condition BRAND NEW Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 1 Flexible coupling YES AND ALU. FLANGE Controls NO SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS Weight (kg) 600 KG

ZERMA GSE 700 plastic granulator machine manufactured in 2018, is used in the processing of lightweight plastics such as PE, PP or PVC. The granulator has a specially shaped hopper with splash protection, inside of which there are fixed knives and a rotor with knives arranged in a ‘V’ shape. The rotor is driven by a slide-rail-mounted electric motor with tension-screw adjustable V-belts. The ZERMA GSE 700 plastic granulator machine can even cope with larger pieces of plastic, such as lumps and film rolls, thanks to the use of a deflecting wedge and block knives to prevent the rotor from blocking. All of the machine’s components are mounted on a base frame, fitted with mounting pads to dampen noise and vibration.

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle w ...

Oven 700 1.3x1.3x1.5m Auto door PLC top quality Giessereianlagen Giessereimaschine Giessereimaschinenbau Giessereitechnik Giessereizubehör Glasschmelzöfen H aubenöfen Herdwagenöfen Hochtemperaturöfen Induktionsanlagen Industrieöfen Industrieofenanlagen Industrieofenbau Kammeröfen Keramikbrennöfen Kippofen Kupolöfen Laboratorien Laboröfen Lötofen Maschinen Muffelöfen Nachverbrennungsanlagen Öfen Ofenanlagen Ofenbau Ofenbauzubehör Prozessanlagen Prozesssteuerungssysteme Pyr lyse Pyrolyseöfen Regelungstechnik Retortenka meröfen Retortenofen Rohrofen Salzbadöfen Schmelzofen Sinteröfen Thermoprozessanlage Thermoprozesstechnik Vakuumglühofen Vakuumkamme fen Veraschungsöfen Versuchsofen Vorwärmofen Wachsausschmelzverfahren Wannenofen Wärmebehandlung Wärmebehandlungsöfen Wärmebehandlungsverfahren Wärmerückgewinnungsanlagen Warmhalteofen Poreba Gurut ...

Heavy Belt Conveyor GUF-P 2004 Heavy-duty belt conveyor for applications with particularly high loads and bulky material to be conveyed. -Heavy -Strong -Resilient Conveyed material: bulk material, general cargo loose, carton Transport distance: Straight & incline up to 20° Conveying speed: up to 60 m/min Total load usual: up to 200 kg Deflections: 01, 09 with roller ø 105 mm Belt body profile: mk 2004 Product data: Manufacturer: Maschinenbau Kitz Type: GUF-P 2004 BC 4300/700 Conveyor length: 4300 mm Conveyor width: 700 mm Height: 900 mm Propulsion: SEW Eurodrive Motor SF57 DT80K4 400 V 0.55 kW More items - new and used - can be found in our shop! International shipping costs on request!

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle wit ...

Used vertical wrapping machine by Ulma model VTC 700. New 2008. Vertical Fulfillment Wrapping Machine (VFFS) that forms a package with three seals. Designed for continuous packaging at high production speeds of up to 140 cycles/min. The VTC 700 machine is specially designed for continuous wrapping of many different types of products. The machine is extremely flexible in terms of changing the moulding size to allow for different portions and has the versatility to adapt to any type of film. Combine these features with the level of electronics specification and you have one of the most technologically advanced machines available on the market. Standard features: - Stainless steel version. - Servo-driven cross seal jaws (2 servo motors). - Servo driven film transport (2 servo motors). - Open front frame design. - Film spool holders with pneumatic wedges. - One-piece and eas ...

Refrigeration display case / sales counter Model Jamaica 700 with 3 glass shelves Circulating air cooling Temperature +5 to +15°C adjustable Dimensions: 700 x 865 x 1360 mm, WxDxH Connection 230V, 400 watts Used equipment cleaned Visit our great sales shop!

table diameter: 1300 mm table load: 7.000 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 0,9 UpM T-slots: 6 x M24 Tilt Angle: 90-180-100 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 3.050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 1.750 kN injection volume: 318 cm³ screw diameter: 45 mm platen size: 700 x 700 mm daylight between platens - max.: 460 mm Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Perfect binder line WOHLENBERG GOLF 370 consist of: Gathering machine WOHLENBERG SPRINTER 7000 1994.year 16 automatic station with double and mis control (4 unit x 4 station) hand feed station criss-cross delivery pumps, documentation conected to Binder WOHLENBERG GOLF 6000 1994. year Max size of book 370 x 320 x 50 mm opticontrol for book size on enter proces vibrator for book block milling and rughering station extraction sistem with 2 bags hot melt side unit with 2 disc hot melt spine unit with 2 rolers PUR melt spine unit with 2 rolers and PUR Nordson melter 20 kg PUR station for cleanig cover feeder with duble and mis sensor control 15 clamps 1 x press station for conection of cover and bookblock 2 x press station for forming spine and side of book delivery table pumps, spare parts, dokumentation ...

New 250 KW 294 KVA water-cooled three-phase motors EMOD WKASYG 315L4-700 (5 pieces) for sale. 4.500 € for each generator plus VAT. FCA freely charged in D-Bergisch Gladbach. Brand: EMOD Type: WKASYG 315L4-700 Year of construction: 2018 Voltage: 400 V rpm: 1510/ min Engine number: 8359010 Weight: 2.322 kg Rated voltage: 400 D Rated current: 425 A Rated power 250 kW/ 294 KVA Operating mode: S1 Engine protection: KALTL. : 3155°C Design: B3 Wave: 80170 KLK location: 0° Protection class: IP55 Frequency (Hz): 50 Condition: Completely new

Key data: 700 , 121 , 35

Manufacturer: Arburg Type: 320 KS 700 - 250 Year of construction: 2001 Control: Selogica Locking type: Knee lever Closing force: 700 kN Tie bar spacing: 320 mm x 320 mm Plate size: 476 mm x 476 mm Tool height: min 200 mm max 400 mm Opening distance: 250 mm Plate spacing max.: 650 mm Screw: 35 mm Stroke volume: 144 ccm / 121 gram PS Injection pressure: 1820 bar general Engine: 15 kW Heating: 6.1 kW Dimensions: 3.3 m 1.45 m x 1.6 m Weight: 2190 kg Screen text: German Optional extras Robot interface funnel

Milling machine 4-axis (15995740874) DMG Milltap 700 (2015) Spindle 24,000 1/min NC parts apparatus Lehmann EA-510. L Tool magazine 25 places Renishaw Measurement Kit Rinsing gun Milling machine 5-axis (15995747284) DMG Milltap 700 (2015) Spindle 24,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Rinsing gun Renishaw Measurement Kit Milling machine 5-axis (15995765944) DMG Milltap 700 (2018) Spindle 10,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Renishaw Measurement Kit Automatic front door Automation interface including automation door on the right Milling machine 5-axis (15995734744) + WH3 (770200062R) DMG Milltap 700 (2014) Spindle 10,000 1/min Swivel rotary  ...

power capacity: 29 kW volt: 129 V ampere: 29 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

7000 m² mezzanine, as good as new Used goods, good condition, see pictures Column grid 580 x 520 cm Ground floor: Height lower edge: 490 cm Height top edge: 540 cm Load capacity: 750 kg/m² 1st floor: Height lower edge: 340 cm Height top edge: 380 cm Load capacity: 500 kg/m² 3. Floor ceiling possible Price on request Partial sale and CAD planning possible. Transport and assembly possible. All plans and statics available. Subject to change. As long as stocks last. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

power capacity: 23 kW volt: 127 V ampere: 33 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torque: 12 Nm volt: 144 V ampere: 11 A power capacity: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 350 mm roll length: 700 mm rolls drilled: peripher Nip adjustment: hydraulisch 0 total power requirement: 2x 15 kW Condition: new, with CE mark, Specification: Two Roll Mill 350 x 700 mm - new - cylinder diameter: 350 mm - cylinder length: 700 mm - cylinder boring: peripherally drilled - cylinder bearings: with grease lubrication - 2 cylindera chromed - nip admustment: hydraulically - new hydraulic unit - tipper guiding plates of nylon-polyethylen-material - stainless steel tray - bi-directional bars - AC brake motors: 2 pcs, each 15 kW, 400 V, 50 Hz - bevel gearboxes of transmission: 2 pcs - painting: with RAL colours acc. to customer’s specification - complete machine protection with stainless steel carters - new electric cabinet - new electrical system - new machine on-board system - new control panel Touchpanel 7 - PLC system: 1 piece, brand Siem ...

Description of the chip press: Powerful metal chip press with chip shredder for long turnings. The area of application is the processing of large quantities of milled and turning chips. Materials: aluminum, steel, cast iron Drip pan as oil tank Geared motor for optimal agitator operation Hydraulic Compression Cylinder Hydraulic press cylinder with two coaxial sections Diameter of briquettes 60 mm Automatic briquette length adjustment with displacement transducers Inductive Proximity Sensors Pre-compaction cylinder in conjunction with special compression hydraulic cylinder that compacts the material in the bushing-bulkhead unit Briquette ejection system, consisting of a compression chamber and a bulkhead with special anti-wear treatment Highly efficient closed-circuit oil cooling system consisting of an air/oil heat exchanger Hydraulic system with B ...

: 300 mm : 500 m³/h : pa Filter capacity: m² : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

85,700 litre wine tank/storage tank RSM, round, made of V2A Cat No.: 24-0149 Condition: New Pieces: 5 KK UNI-ACKER Dimensions: Overall height: 12,850 mm Diameter: 3,000 mm Sheath height: 12,000 mm Thickness: Bottom 3 mm Sheath 3-2 mm Lid 3 mm composed of: Flat floor for concrete base 3% inclined incl. ground anchoring ring in accordance with European regulations in the event of earthquakes and storms (parts of the anchor ring must be welded on site by the customer). Nozzle DN100 DIN 11.851 in the lid (for mounting light on the customer's side, light not included) Dome Ø 400 mm in 1.4404 with jointvery stable Solid door Laveggi A4 (edge thickness frame 12 mm) without swivel arm Double-jacketed laser-welded 2xh 1250x9330 à 8.75m2 with parallel connection 2" Connector Thermometer connection NW20 with sleeve Cleaning line NW 50 with connection  ...

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmMax. torque (40% DC)525 NmTorque (100% DC)410 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Y-Axis PartingTechnology cycle to parting off the workpiece by the Y-axis to ac ...

ESPERA ES 7000 ID.NO. 2106 Espera ES 7000 labeler over + below and extra labeler. Year against 2004. Dimensions 235 x 80 cm H 185 cm.

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter406 mmDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mDrive power main spindle22/18,5 kWRapid feed X / Z30/30 m/minMovements X / Z260/795 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.2500 rpmBar diameter max.102 mmSpindle bore111 mmMax. Turning Length705 mmWeight approx.6400 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pLeft Spindle through-spindle hole dia. 111 mm (spindle speed 2,500 min-1, 22/ 18.5 kW)(Left Spindle) Through-Spindle Hole Dia. 111 mm (4.37-inch) (Spindle Speed 2,500 min-1, 22/18.5 kW) The NLX 2500 adopts a h ...

RECONDITIONED RIERA NADEU 700F-1400 CENTRIFUGE REF.: C5540 Reburfished horizontal axis centrifuge and automatic discharge for the solid-liquid separation manufactured by Riera Nadeu and reconditioned by Comquima. General characteristics: Manufactured by RIERA NADEU Model 700F-1400 Weight 17.655 kg Dimensions: Width: 2,450 mm Length: 3,640 mm Height: 2,980 mm Technical characteristics: Basket diameter 1.400 mm Height basket 700 mm Max. load 690 kg Useful load 550 dm3 Max. rotational speed 1.135 rpm

automatic baler Manufacturer: PAAL Type: KONTI 700 G/S Year of construction 2010 specifications: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 75 kW Throughput capacity (according to manufacturer's specifications): approx. 650 m³/h Capacity at 35 kg/m³: 22.5 t/h Capacity at 60 kg/m³: 36.5 t/h Capacity at 100 kg/m³: 55.5 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,450 kg depending on baled material and bale length Machine weight: up to approx. 47 t

Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

; Gross weight [kg]: 6600; Engine: Cummins KTAA19-G6A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 975

An original control cabinet that was dismantled by the PAAL Konti 600 E/K, built in 2005. It is based on SIEMENS S7 controller. It is also suitable for other models such as: Konti 700 A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Mobile laboratory refrigerator (+1 / +8 °C). Incl. grating and lattice rail. Refrigerator is as good as new. Mobile Laboratory Refrigerators (+1 / +8 °C). Incl. grating and grating rail. Refrigerator is as good as new.

Key data: 700 mm, 420 mm, 380 mm

Specifications: Manufacturer: DMG MORI Type: Milltap 700 Year of Make: 2016 Control: Siemens 840D SL Travel: X 700 mm Y 420 mm Z 380 mm Switch-on hours: 32,722 h Program runtime: 24,284 h Spindle running time: 12,539 h Spindle Speed: 10,000 rpm Tool holder: DIN30 NC swivel rotary table Table load: max. 100 kg Swivel range A: -100/+120° Rotation range C: 360° Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tool Changer Conveyor IKZ Internal tool cooling with high-pressure system Preparation for automation

Type: ST-700 Sealing length: 4 620 mm Vacuum pump: 40 m3/h Machine cycle: 20 - 40 sec. Voltage: 380 V, 50 Hz Electric power: 3.3 kW Machine dimension in cm: Width: 145 Lenght: 65 Height: 98 Delivery time: after advanced payment, 1 working day