7 axis used for sale

Refrigerated centrifuge, Varifuge 3.0 R, Elec: 230 V / 50 Hz / 8 A , Maximum speed: 4000 rpm, Dimensions (mm): 555x670 H 695, Internal dimensions (mm): Diameter: 460 mm Height: 200 mm, Maximum temperature (°C): 40 , Refrigerated gas: R134a

engine: diesel engine CAT C9.3 Stage V power: approx. 280 kW / 381 hp shafts: 7/7 discs with 5 knives per disc multipurpose (reconditioned) and breaker bar with combs (reconditioned) Version: - Mobile Hook Lift Frame - wheel axle with full tires and drawbar - Permanent overbelt magnet - Water sprinkling system - Remote control weight: approx. 21 t

Polar 78X Type: guillotine cutter Year: 2008 Equipped with: Cut control system with display Programmable back gauge positions Motorized back gauge Hydraulic clamp Air table Optical cutting line Light curtain safety system Fully automated operation Side tables Technical details: Cutting width: 78 cm Max. pile height: 12 cm Feed depth: 78 cm Machine details: Net weight: 1,350 kg Width without / with delivery tables: 158 / 198 cm Installation depth: 202 cm Height: 157 cm

total power requirement:413 kW Induction hardening machine Rotary table Eldec: Z (servo drive 750 mm Y (electromechanical) 300 mm X (electromechanical) 200 mm Maximum part diameter 600 mm Maximum workpiece weight 500 kg High frequency generator type HFG 200 Medium frequency generator type MFG 30

adjustment drive of the grinding spind.slide:0,0025 - 0,05 mm total power requirement:100 kW adjustment of grinding head slide:150 mm weight of the machine ca.:17 t grinding spindle drive:2 x 37 kW grinding width:30-150 mm peripheral speed:34 m/sec workpiece speeds:60 - 300 mm/Sek. grinding height:70 mm grinding wheel diameter:750 mm grinding tools:750 x 75 x 350 mm grinding wheel turning speeds:870 U/Min. max. workpiece diameter:250 mm

x-travel:700 mm y-travel:450 mm z-travel:500 mm total power requirement:23,4 kW weight of the machine ca.:3100 kg dimensions of the machine ca.:3200 x 4000 x 2500 mm tool taper:ISO 40 feeds:0,2 - 0,6 - 0,12 mm/U spindle speeds::20 - 3150 , direkt programmierbar /min feed range:1 - 3000, in B=0,01 - 3 U/min rapid traverse in x-y-z axis:6m/ min, B = 7,6 U/min work table::NC Rundtisch(B-Achse) D=630 mm, 9T-nuten control:CNC432

bore capacity in steel (diameter):100 mm max. pitch circle:7000 mm number of spindles:2 bore spindle turning speed range:1 - 3000 U/min high speed spindle taper ISO:50 bore slide stroke:900 mm feed speeds:1 - 6000 mm/min max. workpiece weight:18000 kg total power requirement:125 kW dimensions of the machine ca.:13 x 11 x 5,1 m with CNC SIEMENS 840 D Workpiece clamping up to dia. 7000 mm The machine is equipped with 2 drilling spindle supports and through spindle coolant (50 bar)both supports can drill simultaneously. Spindle taper SK 50, 2 stages 1 -600 rpm 1650 Nm and 1 - 3000 rpm. 300 Nm Chip conveyor and coolant device

nominal force:315 t stroke:300 mm no. of strokes:36 /min distance between columns:540 mm distance table/ram, max. stroke up, adjustment up:750 mm table surface area:530 x 630 mm blow die to die:630 t Allowed max. force:500 t ram surface:450 x 560 mm spindle diameter:180 mm power capacity:18,0 kW weight:13,0 t Dimensions (WxDxH):2,5 x 2,0 x 4,0 m

Disinfecting washer for laboratory., Upper basket for injection, Lower basket, Maximum cold water temperature (°C): 20 °C , Maximum hot water temperature (°C): 70 °C , External dimensions (mm): 730x900 H 845 , Interior dimensions (mm): 500x540 H 600

NOACK Blistering machine type DPN 760, This equipment is ideally designed to condition small batches., Sold with a very wide range of formats., Elec:: 380V / 50 Hz , Air intake:: 8 bar max , Maximum cadence per minute : 240 , Maximum blows per minute: 4, Maximum forging surface area (mm): 155x138 , Maximum forming depth (mm): 25 , Dimensions (mm): 2900x690 H 1590, Weight (Kg): 1017 Kg

HEXAGON ROMER Absolute Arm RA-7512-4 – Mobile 3D Coordinate Measuring Device Description: Mobile 3D coordinate measuring arm HEXAGON ROMER Absolute Arm RA-7512-4 for precise three-dimensional measurement of components and workpieces. Technical Data: Manufacturer: HEXAGON METROLOGY Model: ROMER Absolute Arm RA-7512-4 Year of Manufacture: 2016 Date of Manufacture: 03.08.2016 Serial Number: 7512-4242-FA Country of Manufacture: France Axes: 6 Measuring Range: 1,200 mm Single Point Repeatability: 0.010 mm Probing Error MPEP: 8 µm Length Measurement Error MPEE: 5 + L/65 µm, max. 15 µm Power Supply: 15 V DC / 3.0 A Note: Technical data according to general manufacturer documentation. All information without guarantee. Current accuracy and calibration not confirmed. For further details see photos.

width: 700 mm height: 1.510 mm depth: 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1100 mm width: 700 mm height: 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 750 mm plate depth: 1.200 mm plate height: 180 mm T-Slot Fixture Plate / Machine Face Plate with Center Bore The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 760 mm plate depth: 1.260 mm plate height: 110 mm T-Slot Fixture Plate / Machine Table / Clamping Plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 750 mm plate depth: 1.110 mm plate height: 80 mm T-Slot Fixture Plate / Adapter Plate with Center Recess The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 750 mm plate depth: 1.010 mm plate height: 110 mm T-Slot Fixture Plate / Adapter Plate with Center Bore The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 750 mm plate depth: 1010 mm plate height: 115 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 760 mm plate depth: 1.210 mm plate height: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 750 mm plate depth: 560 mm plate height: 90 mm diameter: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 710 mm plate depth: 500 mm plate height: 100 mm diameter: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 750 mm plate depth: 450 mm plate height: 70 mm diameter: 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 780 mm plate depth: 600 mm plate height: 70 mm diameter: 120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 600 mm plate depth: 400 mm plate height: 70 mm diameter: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 1.700 mm plate depth: 1.200 mm plate height: 80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 900 mm width: 570 mm height: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Almost unused used CNC rotary axis from ISEL Automation ! By exception, a competitor's product. From a payment of a complete CNC fraes machine from ISEL due to the switch to a T-Rex CNC Fraes machine from CNC-STEP Top exact product, solid, stable processing. A few years old but top in shot. 100mm Holder for chuck 23mm Throughlet Height 320mm Width: 21 0mm Stabile cast aluminum discharge 4 Screw fasteners on the foot step motor 6.0 Ampere ! Controltable up to 48 volts Please also note our other CNC machines offers;

Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripperREXROTH INDRAMAT Type: MKD0771B-061-KP1-KNIdent No. 247238 0001Year of construction: 2000Axis movement: 2400 mmCarriage length: approx. 500 mmTotal length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders)- Standard linear guide 65 x 25 mm- basic profile made of steel- ball screw 32 x 10 mm- pneumatic with position indicator- Permanent Servo Motor Type:

Pinion shaft, robot 7th axis, AD138mm, 23 teeth, MG1-02634, ABB, new Attention: This is an original product and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, - is in the original packaging, - We will be happy to measure the pinion shaft for you 12 months warranty We give you a 12-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. Our terms and conditions apply, see our website. Austrian law  ...

5-axis controlled milling centre Control: E 160 CNC Work piece clamping: 2 axis cradle type with tool-taper clamping Indexing of work piece cradle (A/B) full rotary and tilting controlled Traverses: X 1050 mm Y 420 mm Z 420 mm Spindle motor rating: 9 kW Spindle speeds to: 4000 rpm Gear steps 2 Torque: 450 Nm Pick up magazine tool positions: 15 with 2 places for extra large tools Tool taper: ISO 40 Equipped with: 2 Axis clamping system for parts, taper ISO 50; Vertical milling head ISO 40; Full guarding; Pick up magazine for 15 tools; VERY LITTLE USAGE AND ONLY WITH CUTTING OILS; Excellent

Linear axis for KUKA KR6/16 KUKA KL1000 CV high Built in 2007 Length 4500mm .

Linear axis for KUKA KR15, KR6 Length 2m .

Rice Robotics incl 2 x 2 axis robot control cabinet / control absolutely mint condition Year 2009 (ca 300 hours run) Height approx. 2.0 m Width ca of 4.0 m consists of: 2 columns 1 driving beam 2 x 2 axle robot 2 Robotics control cabinets Switching and control documents

Bellows for Mikron Fraesmaschine WF3 (WF3SA)Z-Axis

FMS SYSTEM; Machining Cell consisting of: Two 5-Axis Machining Centres 12-Pool Pallet System (630 mm X 630 mm); Pallet Storage System X= 750 mm, Y= 860 mm, Z= 850mm; B= 0,001°; 334 Pos. ATC Spindle Taper HSK-A100; Spindle n= 11.000; Spindle 25 kW; Feeds 32.000mm/min; Chip-conveyor; Coolant System Serial No. 1283-01 (2001) Siemens 840D; and Coolant System Serial No. 1024-98 (1999) Siemens 840C FR: À VENDRE MAINTENANTFMS SYSTEME ; 12 Pos. Piscine à palettes (630 X 630mm) ; 2x horloge MCM 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS ; X= 750, Y= 860, Z= 850.mm ; A= .. ? ? B= 0,001° ; 334 Pos. ATC ; cône de broche HSK-A100 ; broche n= 11.000 ; broche 25 kW ; avance 32.000mm/min ; convoyeur à copeaux ; système de refroidissement n° 1283-01 (2001)Siemens 840D ; et système de refroidissement n° 1024-98 (1999)Siemens 840C

5-axis controlled fraescenter Control: E 160 CNC Travel distances: X 1,050 mm Y 420 mm Z 420 mm spindle holder: ISO 40 spindle drive power: 9 kW spindle speeds: 4,000 rpm. Gear levels: 2 spindle torque: 450 Nm tool magazine positions: 15-speed pick-up magazine Zubehoer: 2-axis clamping device for parts, ISO 50; Vertical frause head ISO 40; Full cladding; tool magazine pick-up for 15 tools; SEHR WENIG USED; WORKING ONLY WITH OeL !; Excellent

Capacitive: 60 kg 6 axes simultaneously controlled by Fanuc Teach-In System ; Very good

Capacity : 60 kgs. 6-axis simultaneously controlled by Fanuc Teach-In System ; Very good

Special machine / testing machine / 2-axis handling system Testing machine from the field of fuel cells / plastic films, built in 2004. In the past, the handling device was used for the electrical testing of fuel cell membranes using a pneumatic press. This press is no longer available, so the machine can no longer be used for this purpose. The handling device is very well suited as a base carrier for new applications in testing technology. Special-purpose machine manufacturers can use the handling system as a cost-effective base carrier for setting up an automatic testing system and thus secure cost advantages over the competition. Thanks to the on-site retrofitting with a high-quality camera, the handling system can assess the test specimens and sort them into different quality levels with the different suction plates. Thus, with this handling device and a camera sy ...

Yaskawa Motoman UP130 6-axis robot with Motoman Xrc control Robot: Motoman YR-UP130-A00 Hand controller :Yasnac Mrc Year of construction: 2000 (6th month) Robot controls: Motoman Xrc ERCS UP130-RE00 Hand control: Yasnac Mrc Year of construction: 2001 - Axis: 6 - Load capacity: 130 kg - Arm extension: 2650 mm - Repeatability: 0.2 mm - Robot weight: 1300 kg - controller Xrc - cables, plugs, plugs Structure: vertically articulated type Axis types: S-axis 130 ° / s (2.27 rad / s) L-axis 130 ° / s (2.27 rad / s) U-axis 130 ° / s (2.27 rad / s) R axis 215 ° / s (3.75 rad / s) B-axis 180 ° / s (3, 14 rad / s) T-axis 300 ° / s (5.24 rad / s) Movement areas. Fsbmofhkfijafvpxopk S axis 180 ° L axis + 76 ° - 60 ° U axis + 240 ° - 130 ° R axis 360 ° B axis 130 ° T-axis 360 °

Linear drive, spindle axis, stroke 1135, EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Festo spindle axis, linear module, liner drive, linear slide EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Overall dimensions: 1625x130x110mm, approx. 55kg, slide 300x70mm, stroke 1135mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded i ...

Wiring harness axle 1-3, 3HAC050554-001, ABB, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Laser Prima Industrie mod. Platinum 1530 Year 2008 CNC Primach P20L Working hours about 25.000 Visible running.

Axis control, electronic handwheel, control unit -The electronic handwheel was removed from a CNC machining center make: Hitachi Seiki type: HC400. Other spare parts available. -electronic handwheel for Hitachi Seiki type: HC400 -Dimensions: 170/120/H80 mm -Weight: 0.6 kg

Laser Salvagnini L5 FIBER 3 KLW Year 2011 with automatic stacker Unloading robots Visible in operation Available January 2024

Rotary axis drive, drive, limit switch -Manufacturer: Telemecanique -Type: ZCE01 -Quantity: 5 available Price: per piece -Minimum order quantity: complete -Weight: 0.05 kg

1x Linear robot Reis RL80-13 incl. 2 control cabinets absolutely mint condition Year of construction 2009 there are 2 robots on each beam, a two-axis robot and a three-axis robot the system is dismantled, complete with control cabinets the glass gripper and the Zimmermann & Schilp non-contact glass lifting system are not part of the range of products there are 2 of these double robot systems available incl. loading

Control: iTNC 530 Max.travel range: X 500 mm Y 450 mm Z 400 mm A +5 / - 110? - manual C nx 360? - manual Spindle speed ? 10000 rpm Taper ? SK 40 Tool changer ? 16 positon measuring probe for parts set up 3 axis + 2 axis (dividing head) Tool pr

Control: iTNC 530 Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Twin Pallets Coolant tank:2500l With spindle cooling, mea