5000 ton used for sale

Product number: 1993B Type: GoldFryer TBM630/5000TH Serial number: 10050409 Year of construction: 2005 Belt width: 630 mm Frying length: 5000 mm Heating: thermic oil Power: 3 x 400V, 50Hz, 11kW Dimensions: 9100 x 1900 x 2900 mm Teflon infeed, hold down belt, circulation pump, electric hoists, oil level control, CO2 fire surpression system

turning diameter over bed: 1090 mm turning diameter over slide rest: 690 mm turning length: 5000 mm spindle bore: 146 mm spindle taper: DIN 55027/15 turning diameter in the gap: 1250 mm bed width: 700 mm quick change tool holder: Größe D1 spindle turning speed range: 3,5 - 1000, stufenlos U/min feeds - longitudinal: 1-3000 mm/min feeds - cross: 1-3000 mm/min rapid travel - longitudinal/face: 6000 mm/min thread - mm pitch: 0,5 - 480 mm thread - inch: 60 - 1/16 Gang / inch. thread - module: 0,125 - 120 voltage: 400 V / 50 Hz main drive: 30 kW Control: total power requirement: 35 KVA weight of the machine ca.: 7,2 t dimensions of the machine ca.: 7,2 x 1,75 x 1,9 m • new heavy duty lathe with infinetely variable rotation speed via frequency converter, • at basic price with normal accessories according to list, • possible special acccessories according to separate make-up. The dat ...

Filter capacity: 16,3 m² Motor output: 5,5 kW : 5000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3.400 mm y-travel: 1.250 mm z-travel: 2.000 mm Control: TNC-430PA table-size: 4.700 X 1.200 mm V- travel: 500 tool taper: ISO 50 milling head -swivable: 0.001º/0.001º Grad main drive: 37 kW Chip coveyor: inkl handwheel: HR-410 Tools changer: 60 pos. milling head: Automatic Head 45º weight of the machine ca.: 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 5000 mm turning diameter over bed: 4000 mm turning dia. in gap: 5000 mm spindle bore: 104 mm turning speeds: 1,4 - 71 (18x) U/min total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw face plate Ø 3.150 mm modular lathe! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3000x1500mm

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; heat deflector; Stand-standing device. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Cutter Kilia 5000 Express 500 liters vacuum cooking fast cutter, knife shaft with 6 fixed programmed speeds, 4 forward and 2 backward, infinitely variable bowl drive, electronic thermometer, electronic tour counter, hydraulic noise protection cover, hydraulic knife cover, hydraulic ejector, knife head 8-piece, separate control cabinet made of stainless steel

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Mecman type: 167-05 5000-1 -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Stroke: 370 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 63/63/600 mm -Weight: 2.75 kg

Cooking length 4,000 mm Track width 600 mm completely stainless steel steam-heated with electric lifting device Temperature distribution in 2 zones Dimensions (L x W x H) : ± 5,000 x 1,550 x 2,200 mm infinitely variable speed

Standard configuration ? Solid machine frame with integrated laser unit ? CO2 laser TLF 2700, radio-frequency excitation, chiller ? Motors: maintenance-free 3-phase servo motors ? NitroLine High pressure cutting ? High-speed processing with SprintLine ? Programmable cutting gas pressure ? Laser cutting head with 5 lens, DIAS III ? Cutting head-quick change device ? ControlLine ? Laser power control ? Laser logbook function ? Automatic shutdown ? Work area lighting ? Sinumerik 840D control: Open PC-based control system, easy to use, Online help, diagnostic functions, maintenance logbook, technology data,Teleservice, 3.5 floppy drive, RJ45/BNC network connection ? Safety: Multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, multi-chamber exhaust system and compact dust extractor, safety cabin with Macrolon panels ? Part removal station PRS 3001  ...

roller conveyor, conveyor track, roller conveyor belt, roller track -Roll width: 2000 mm -Conveyor length: 5000 mm -Roller drive: via conveyor chain

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Manufacturer: Danfoss, frequency converter VLT 5000 -Type: VLT 5000 T/C VLT5003PT5B20STR3DLF00A00 C/N: 175Z0046 -Max. power: 3.1 kVA -Dimensions: 260/85/H395 mm -Weight: 6.4 kg

SHREDDER KOMPTECH TERMINATOR 5000 E incl. control cabinet

Control unit, control element, interface, contactor -Manufacturer: Jungheinrich, Contactor control unit from order picking forklift type: ECE 20 -Type: 5000 7894 -Voltage: 24 V -Dimensions: 150/100/H100 mm -Weight: 1.4 kg

Machine for the processing of large-area composite panel materials With this machine you are able to process portrait panel semi-finished products that are otherwise difficult to process We offer you a technology that has already proven itself in practice and works. With this technique you can process semi-finished products up to a maximum height of 220 mm precisely and accurately The technical parameters are queried and measured as required.

Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.

x-travel: 4300 mm y-travel: 1000 mm z-travel: 1050 mm total power requirement: kW weight of the machine ca.: 35 t dimensions of the machine ca.: m Brand: ANAYAK Type: HVM-5000 Build in : 1997 CNC Control HEIDEHAIN, TNC 426 Tablesize: 5000 x 1000 mm X= 4.300 mm Y= 1.200 mm Z= 1.050 mm Toolchanger for 40 tools Tools: BT 50 CNC Controlled head 2,5 degrees Cooling trough the spindle Number of controlles axes: 4 machineweight 35.000 kg Moveable column The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1250 x 2500mm with SheetMaster loading/unloading - Lots of tooling

Arburg April 2014 model 920H 5000-4600 500 ton Can be inspected and seen in production

Year: 2004 - technically efficient, ready to work - after full service - contour milling machine (rounded corners)

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 610 mm -Length: 5 m -Transport dimensions: Ø 280 x 610 mm -Weight: 32 kg

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

Fat baking plant, Fabr.Reimelt, type EL 8/5000 8 rows, Lstg. approx. 5,000 Berliners/h

Manometer, test manometer, saw tension gauge -Manometer: Saw tension gauge -Type: 0 to 5000 kgs/cm² -Mounting: see photos, bore Ø 16 mm -Dimensions: 70/60/H160 mm -Weight: 1.0 kg

Crane block, crane hook, load hook, single hook, bottom block -Crane hook: Crane hook load capacity 5 t -Rope groove: Ø up to 22 mm / see photos -Dimensions: 630/297/130 mm -Own weight: 32.6 kg

Ref. -No.: 10201 Manufacturer: AXA Year of construction: 2007 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 5000 mm Y-Travel: 600 mm Z-Travel: 800 mm Machine length: 9400 mm Machine width: 3500 mm Machine Height: 3300 mm Table Dimensions (Lengthxwidth): 6325 x 1050 mm Swivelling: +/-90 ° Numbers Of Tools In Magazin: 120 Turning Speeds: 30-9000 RPM Tool changer: SK 50 Drive Capacity - Spindle Motor: 45 kW Weight Of The Machine Ca.: 23 t Tool change time: 6 s Vertical working height: 0-740 mm Working height horizontal: 250-1050 mm Space requirement (LxWxH): 11000 x 5090 x 3300 mm Feed rate: X/Y/Z: 40 m / min

NNP 5000L Holding tanks 2004, stainless, 5000l capacity holding tanks, insulated, level detection, three in stock

One used KOCH cold rolling line Tecnicl datas: Block: 1 Drawing drum diameter: Ø 700mm Usage: Structural steel wires Run-in strength: 400 - 450 N/mm² Inlet diameter: 5.5 mm - 11.5 mm Finished wire diameter: 5.0 mm – 10.0 mm mainly consisting of: - Mecanical descaler, - Driven brush descaling - Wire lubricant application device, - drawing machine KOCH KHZ 5000 - Spooler KHS 1250 and - Control panel and control cabinet

Used stainless steel, 5000 L volume. Process tub, complete with curd cutting harps. It was used for the production of granular cheese.

Product Identifier: FVB-1, 2400 dpi, Fiery EXP50 RIP, Speed: 50 Pages/Minute, Resolution: 600x600 dpi, Paper Capacity: Dual 2000 Sheet Paper Drawer

Used line for processing green bean by Femia. New 2007. capacity: 5000 kg/h. The line consists of: 1. Descaler. 2. Rinser. 3. Rod splitter. 4. Rod cutter. 5. Aerator. 6. Vibrating distributor. 7. Bean tip cutters. 4 pcs. 8. Conveyors.

One used KOCH KEG 5000 line with automatic spooler to produce cold rolled wire on spools and coils - Inlet Wire Dia: max. 16.0mm -Final Wire Dia: 5.0 – 14.0mm -drawing capstan: 700 mm dia with hardened steel rings - drive: 160 kW

Complete solution for the transport of bulk materials such as shredded material, wood chips, wood pellets, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm (customizable) Rising area 5,000mm (customizable) Angle in bend 35, 40 or 45° Feed height: horizontal (individual) Drop height individually adjustable Construction: height-adjustable (to be moved) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Propulsion: Motor 1.1KW ( adjustable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 cleats - 400mm pitch 2-ply particularly transversely stable Permanently mounted overbelt magnetic  ...

x-travel: 4.300 mm y-travel: 1.500 mm z-travel: 1.800 mm Control: HEIDENHAIN TNC 530 table-size: 5.000 x 2.250 mm T-slots: 9 T-slot - distance: 250 mm T-slot - width: 28 mm rapid traverse: 15.000 mm/min feeds: 10.000 mm/min milling head: 45° Automatisch UAD milling head: 0,1 º- 0,1 º conus- taper: ISO-50 DIN 69871 AD-50 number of spindle speeds: 60 - 6.000 U/min/rpm transmission ratio: 2 spindle drive: 28 kW Internal cooling system: 20 bar chip conveyor: Inkl. handwheel: Inkl. total power requirement: 36 kW weight of the machine ca.: 40.1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Müro paper milling machine A4; with frame; suitable for Müro 5000/A4. Müro paper mill; with frame; used for Müro 5000/A4.

Original Danfoss frequency converter 1,5 kW 2,2 kW and many more

x-travel:760 mm y-travel:760 mm z-travel:760 mm total power requirement:43 kW weight of the machine ca.:11,5 t dimensions of the machine ca.:2,7 x 4,73 x 2,87 m max. table loading capacity:500 kg

Surplus/Never used or installed, High suction pressure compression unit of 5000 PSI, speed of 1000 RPM, 3550 HP, 10 MMSCFD flow rate. This compressor package consist of: One (1) Caterpillar G3612 LE, one Ariel Compressor JGD/6, Murphy Controls, Cooler and all auxiliary components. This unit was manufactured in 2015, but the project was cancelled. The compressor unit was never used or installed, having undergone a preservation maintenance in 2019. Recently inspected by Enerflex. It was found in excellent conditions!

We offer for sale our Trumatic 5000R laser punching press. The machine is used and in very good condition. Basic data from the nameplate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Ujznvnkmpx Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - Work surface 3070x1660mm - Max. sheet thickness 8mm - Axis of rotation of the tool head C1 and C2 - Form function - Thread function - Multibend function - Pneumatic press - Automatic sliding of details 500x500mm - Water-cooled servo motors Additional equipment of the machine: -Light barrier Softpunch function - Details of the slide sensor - Device for blowing out small details - Chi ...

Used machine in good condition. Available for immediate delivery. - Laser Type: CO2 - Max. workpiece weight: 120 kg - Laser Output: 3 kW - Maximum material thickness mild steel: 8 mm - Maximum material thickness stainless steel: 4 mm - Maximum material thickness aluminium: 4 mm - Control: CNC - Weight: 17.500 kg - Dimensions (long x wide x high): 18.725 x 6.635 x 2.500 mm

Large Format 3000x1500 Sort Master / ToolMaster SheetMaster No Grip or shearMaster - Max. workpiece weight: 220 kg - Punch diameter max: 76,2 mm - Axis speed [Y axis] max: 60 m/min - Control type: Siemens SINUMERIK 840 D - Simultaneous positioning speed (X / Y): 116 m/min - Operating hours: n/a - Axis speed [X axis] max: 100 m/min - Punching force: 220 kN - Working area max: 3.050 x 1.550 mm - Material thickness (punching) max: 8 mm - Power: installed max: 9,5 kW - Weight: 19.300 kg - Dimensions (long x wide x high): 7.600 x 8.171 x 2.072 mm

Automatic loading up to 6.5m LoadMaster tube 6,5m with bundle cavity Minimal scratches for LoadMaster tube 6,5m Tube diameter 15mm LoadMaster Tube 6,5 (12mm semi-automatic) Ejection station 3m (incl. conveyor belt) Piece length +1,5m Workpiece tray Nitroline FocusLine ControlLine Laser power control Programmable cutting gas Lens cutting head with 150? focal length SeamLine Tube with interior detection Adaptive clamping technology - feed station Adaptive clamping - sliding chuck - Max. outside diameter of round tubes: 152 mm - Max. outer circle diameter of rectangular tubes: 170 mm - Max. raw material length for automatic loading: 6.500 mm - Max. finished part length: 4.500 mm - Max. workpiece weight: 20 kg - Laser Output: 2 kW - Laser Type: fiber TruDisk 2001 - Maximum material thickness brass: 3 mm - Maximum material thickness cupper: 3 mm - Maximum material t ...

Key data: 5000 mm, 275 mm, 310 mm

Urban AP 5000 F - Travelling column milling machine - Heidenhain track control TNC 410 M, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 2 chip drawers - Swivelling clamping device for 4700 mm workpiece length - 10 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Safety bumper - Machine guard pneumatically vertical opening - Year of construction 2005 - Control on: 26910h - Program run: 9185h - Spindle on: 6557h Defects: - Air hoses of the tensioners have to be partially replaced - Contact cables of the cylin ...

Blockleimpresse / Block Gluing Machine Müro 4 x 5000 A3 WT 2 1 Pressing stations with stack high of 50cm 1 Drying hot air blower Stapelhöhe / Stack high max. 52,5cm Pressenbreite / Press width max. 52,5cm Pressentiefe / Press deep max. 32cm Gewicht / Weight approx 60 KG Power supply 230 V - 1100/2150 W Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Key data: 880 mm, 730 mm, 730 mm

GENERAL Project No.: 905698 Quantity: 1 pcs. Manufacturer: DMG MORI Type: NHX 5000 Control: Siemens 840 D solutionline Year of Make: 2016 Condition: Used machine Approx. (hrs): 26,341 Spindle in approx. (hrs.): 9,666 DESCRIPTION MILL Travel in X 880 mm Travel in Y 730 mm Travel in Z 730 mm Max. rapid traverse speed in X/Y/Z 60/60/60 m/min Max. feed speed in X/Y/Z 6/6/6 m/min Tool holder HSK 63 Max. speed milling spindle 20000 1/min Max. power at ED 10-40/100% 15/11 kW Tool magazine 40 stations Rotating pallet changer (set-up station can be rotated by motor) 2-fold Max. workpiece weight per pallet 500 kg Rotary table NC-controlled Clamping hydraulics OTHER EQUIPMENT IR Workpiece Probes Tool breakage detection by means of a probe Splash protection cladding with fully encapsulated working area Rotating viewing window Lighting in the work area Scrap ...