5000 ton used for sale

BETOMIX PADDLE MIXER Concrete/BETON Mixer. Two Engines Two Gearboxes

Height adjustable

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Ladies and gentlemen, we may, on the basis of our general terms and conditions of delivery and payment for the trade in used machinery and equipment, offer you the following: Ladies and gentlemen, Offer: 1 piece br. Aluminium continuous casting plant, Make: SMS 3200 tons Price: € net, on request from the location. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection i ...

gebr. Wooden tongs / tree pliers / pipe wrench

Electric chain hoist with travel motor for steel beams, hoisting capacity: 1.000 kg, hoisting speeds: 5,4 m/min. (fast); 1,4 m/min. (slow), incl. Pedestrian control, without steel beam. Brake and drives revised / function checked.

8 piece welding pliers 1 piece welding control Manufacturer: Düring

- Wafer size: D = 30 mm, L = 130 mm - 12 pieces

OCE TONER, FUSER OIL AND STAPLE CARTIDGES Description: Number of pieces: Oce C2 toner yellow: 3 Oce C2 toner black: 2 Oce C2 toner green: 3x Oce C2 toner Cyan: 4 Oce C2 toner blue: 4 Oce C2 toner Red: 3x Oce C2 toner Magenta: 3x Oce F3/F11 toner 5x Oce S2 Spaple Cartidges 3x 5000 Oce S3 Spaple Cartidges 3x 5000

- Wafer size: D = 40 mm, L = 97 mm - 10 pieces

Steam capacity at 102 ºc of nutritious water --- 10000 kg / h Heat efficiency --- 6.5mW Permissible excess pressure --- 13 Bar Working pressure --- 12 Bar Water content --- 19 m³ Total water content --- 22.6 m³ Transport weight ---- 21,3 t Working weight --- 40.6 t Fuel --- Gas and diesel Manufacturer of water --- Weishaupt Type of water --- Weishaupt G 70 / 2A Water adjustment --- Modulated The heat is the voltage of the current volume --with full fire chamber --- 1.02 mW - without full fire chamber --- 1.21 mW Boiler efficiency - at 100% productivity --- 90% - at 50% productivity --- 90.5% Boilers are still running and video is available on request

- Pneumatic Nietzange Model CP 0351 ESVEL Compression Riveter by Chicago Pneumatic Used

Qty. 1 Second-hand JCO pipe press bending line Mfc.: Samyul, ROBO, Shinsung, ChangSong, Rotech, FANUC, Hyupshun, Ingersoll Built: 2003, 2008, 2009, 2013, 2014 Plate material: Mild steel Plate dim.: 16.0 x 5.2 x 0.08 m – L x W x T Pipe dia.: Φ400~Φ1650 mm Pipe Length: 6.0m ~ 16.0 m Scope of supply: JCO Hydraulic Press Tack Welder Machine Sealing Welder Pipe Heating & Rotating Device Inside Welder Outside Welder Calibration Presses Milling Cutter Cutting Machine Bevelling Machine Compressor

350 Ton Crawler Crane KOBELCO”, Model CKE4000C Mastertech (2007) Max. Lifting Capacity - 350 t /6.0 m Boom Length - 18 m to 78 m Main & Aux. winch Max . Line speed: 130 m/min (5th layer) Wire Rope: 28 mm Brake Type: Spring set hydraulically release brake Working speed Swing Speed: 1.3 min-1 {rpm} Travel Speed: 1.0/0.4 km/h Power Plant HINO”, Model K13C-UV Engine Output: 295 kW/2,000 min-1 {rpm} Fuel Tank Capacity: 600 liters Hydraulic System Main Pumps: 6 variable displacement pump Max. Pressure: 31.9 MPa {325 kgf/ cm2 } Self-Erection Device Weights Operation Weight: Approx. 346 t Counterweight: Std. 120 t (Upper) + 41 t (Lower) Transport Weight: 60.0 t (Main machine) Ground Pressure: 150 kPa {1.52 kgf/cm2 } Make KOBELCO Year 2007 Capacity 350

Toner, Laser Jet 2100, Canon EP-32 -Order Code: 57210PB -Replaces: C4096A -Complete price -Weight: 4 kg

Ermak Power-Bend Pro 135 Ton CNC Press Brake Folding length: 3100 mm 135 Ton Machine is in good working condition

Manufacturer Durma Model RP6 12530 Year 2007 capacity 30 Ton Machine is in good condition

Engel Victory 3550/500 tech Injection Moulding Machine Machine is without column Robot and dryer are not included in the price CC200 control system Number of working hour : 31 000

We sell 6 x HP Laserjet M551 CE400Y (black) 8 x HP Laserjet M551 CE403YC (magenta) 7 x HP Laserjet M551 CE401YC (cyan) 8 x HP Laserjet M551 CE402YC (yellow) 9 x HP Laserjet CP3525 CE250XC (black) 9 x HP Laserjet CP3525 CE253YC (magenta) 9 x HP Laserjet CP3525 CE251YC (cyan) 10 x HP Laserjet CP3525 CE252YC (yellow) 5 x HP Laserjet CP3505 Q6470AC (black) 5 x HP Laserjet CP3505 Q7583AC (magenta) 5 x HP Laserjet CP3505 Q7581AC (cyan) 5 x HP Laserjet CP3505 Q7582AC (yellow) 3 x HP Laserjet CP2025 CC530AC (black) 4 x HP Laserjet CP2025 CC533AC (magenta) 1 x HP Laserjet CP2025 CC532AC (yellow) 3 x HP Laserjet M725 CF214XC (black) 1 x HP Laserjet 4015 CC364XC (black) 4 x HP Laserjet 3005 Q7551XC (black) Total count: 102 In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only  ...

Used pallet rack - approx. 3,500 x 11,300 x 1,100 mm - heavy duty rack rack 2.2 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well a ...

Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K Year of construction 1994 Operating hours 42,.650 hours, stand September 2022 Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm Filling volume 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm, lenght variable Drive power 2 x 30 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 16 tons/hour bulk weight of 50 kg/cbm approx. 25 tons/hour bulk weight of 100 kg/cbm approx. 47 tons/hour Bale weight with a bale length of approx. 1.2 m approx. up to 1400 kg, depends on material Filling volume hydraulic oil tank 1,200 l SPS controller (manuf., type) Telemecanique TSX 47 Effektive transport dimensions only baler 11,850 x 2,600 x 3,470 mm (l x w x h) Transport weight baler 38.5 tons Condition of the baler: The machine was  ...

Column Mounted Crane 2 T MANUTENTION CONNECTION type PFSP Capacity: 2 Tons Arm travel: 2000 mm Year of construction: 2001 Column diameter: 400 mm Max height under hook 2200 mm Column height: 3100 mm Height under beam 2800 mm Electric hoist 2 T

Rotating crusher for excavators from 5-10t Manufacturer Rent Demolition Type CR7 Rotating Crusher (Unused) Year of construction 2023 Similar sold items Divide Functions to fit 5-10 tons excavator

Span 177 Meter ; Lifting Height 74 +12 Meter; 2 x 300 Ton Hoists; Main Hoist 350 ton, Auxiliary. Hoist 350 Ton ; Service Crane 6,3 Ton (2008) Capacity: Span 177 Meter ; Lifting Height 74 +12 Meter Make KONE-WIA Year 2008

60/5 Ton x 60 Meter DOCKYARD- & QUAY CRANES LIEBHERR BOS 6000-60 Litronic (2007) Main hoist - 60 Ton Auxiliary- 5Ton Rail Span - 8 Meters Rail is Excluded (Part of the structure). Capacity: 60/5 Ton x 60 Meter Make LIEBHERR Serial 162845 Year 2007

(2007); Max. Roll Length 20 M; Min. Daylight between Roller 960 mm; Max. Ram stroke 1050 mm; Top Roll diam. 500 mm; Bottom Roll 420 mm; 8 sets of Back-up Rolls; Min/Max Bottom Roll Centers 500/800 mm; Pressing Speed 1 to 6 mm/sec. Ram Approach 60 mm/sec; Main Motor 125 HP. Including Spare for Bottom Roller, control panel, panel boxes and conveyors. Capacity: 2200 TON, Working size: 20,000mm x 25t, 5,000mm x 40t

Yom: 2011 Elevating transporter 700 Ton KAMAG U1409-22H HS8E (2011) L/C No.: 5636ILS110510227 Package No.: 01/04 Gross/Net Wt.: 130,000Kg / 130,000Kg Dimension: 24,000 x 7,000 x 1,600 Weight 130,00 Make KAMAG Serial 20102227 Year 2011 Capacity 700

YOM (2008); Max. Roll Length 17 Meter; Min. Daylight between Roller 960mm; Max. Ram stroke 1040 mm; Top Roll diam. 480 mm; Bottom Roll 400 mm; 6 sets of Back-up Rolls; Min/Max Bottom Roll Centers 500/800 mm; Pressing Speed 1 to 6 mm/sec. ram approach 60 mm/sec; main motor 125 HP. Including control panel, panel boxes and conveyors. Weight: 600.000,00 Capacity: 2000 TON, Working size: 17000mm x 35t, 5500 x 40t

YOM: 1997 SHIP’S PARTICULARS: NAME: M/V HHIC-F1 HOME PORT: Manila GROSS TONS: 1380.00 G/T NET TONS: 414 Tons LOA: 67.26 Meters TYPE OF SHIP: ROLL ON-ROLL OFF TRADING: COASTWISE WITHIN SUBIC BAY ONLY TYPE OF SERVICE: COMPANY USE - SERVICE BOAT ONLY MAIN ENGINE: CUMMINS x 2 HORSE POWER: 850 x 2 SERVICE SPEED: 8.5-11 kts

Vibrating tone warning signal -Number: 6 pieces -Type: PA 100 -Price: per piece -Weight: 0.2 kg/piece

Profile steel pliers, section iron grippers TAKRAF ZP 1 ( ZP1 ) load capacity: 1000 kg gripping width: max 200 mm New ! Dimensions: 550 x 455 x 200 mm

Technical data baler: Manufacturer Europress Umwelttechnik GmbH, Germany Type EP5 150 V5 Year of construction 2015 Operating hours 19,173 hours Number of pressed bales 282,961 bales Number of press strokes from the press ram 1,895,112 press strokes Pressing force of main press 150 t Specific pressing force 181.8 N/cm² Dimensions of feed chute 1,000 x 2,000 mm (w x l) Bale dimensions 750 x 1,100 mm (h x w), length variable Drive power 2 x 55 kW + 15 kW + 2 x 0.75 kW Rated current 230 A Cable cross-section supply 120 mm² Tying 5-fold vertical, fully automatic Hydraulic oil tank capacity 4,300 l PLC control Siemens S7 / ET200S Transport weight press 35,800 kg Special equipment: Base plates and side walls made of HARDOX steel Free tamper in front of the counter blade, with cleaning cycle Scope of delivery: 1 piece baler 1 piece control cabinet 1 set of oil collecting pans under the baler 1 ...

Mobile Jaw Crusher in good condition. Approx. 1,500 operating hours.

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Smeral Trnava, single-column eccentric press type LEN 25 C -Pressure capacity: 25 tons -Clutch: pneumatic -Stroke: adjustable 8 - 85 mm -Stroke rate: 80-160 strokes/min, see photo of type plate -Table size: 435 x 560 mm -Table recess: Ø 90/180 mm -Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 230 mm -Dimensions: press 1220/1160/H2100 mm / control cabinet 680/355/H970 mm -Total weight: 2569 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Kaiser, punching machine with gripper feed type PO 40 F -Pressure capacity: 55 tons -Stroke: adjustable from 9 to 60 mm -Stroke rate: 70-350 strokes/min -Table size: 590 x 410 mm -Table recess: 290 x 150 mm -Projection: 220 mm -Punching fixture: Ø 38 mm -Insertion height 335 mm -Dimensions: 1905/1540/H2940 mm -Weight: 3720 kg

Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: BBT Presses, single column eccentric press type ER 25 with safety cage -Press guard: Nilson -Clutch: pneumatic -Pressure capacity: 25 tons -Stroke rate: 50/100 strokes/min -Stroke: adjustable 12 - 80 mm -Table size: 520 x 360 mm -Projection: 190 mm -Punching fixture: Ø 30 mm -Insert height: 310 mm -Central lubrication -Dimensions: 1180/800/H1820 mm -Weight: 1418 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press, -Safety cage fully closed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Projection: 190 mm -Strokes: 105 strokes/min -Plunger adjustable: 50 mm -Plunger area 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Projection: 180 mm

Wall jib crane, indoor jib crane, indoor crane, workplace crane -for: spot welding gun -Outreach: 4000 mm -Total height: 1100mm -Swivel range: 270° -with: Crane chassis and cable trailing shoe -Dimensions: 4000/100/H1100 mm -Transport dimensions: 4000/200/H150 mm -Own weight: 100 kg

650 Ton L/D: 19 Screw diameter : 90 mm Screw volume(cm3) : 3140 Stroke : 1350 mm Distance between columns : 950 mm x 950 mm DayLight : 1800 mm Plate size : 1400 mm x 1400 mm All maintenance has been done regularly Only original raw material used on the machine Fully hydraulic

Vessel rotating device, vessel rotating device, welding rotating device, welding rotating device, welding device, welding rotating table, welding rotating device -Container rotating device: Welding rotating device on rail chassis -Drive motor: 7.5 kW -Load capacity: 60,000 kg -Roller spacing: 990 - 2120 mm, wheels Ø 560 x 580 mm -Rolling speed: 0.10 to 3.35 m/min right/left running -Program control device: with hand control and foot pedal -Rail width: internal dimension 1985 mm -Transport dimensions: 3860/2635/H975 mm / 3625/3070/H975 mm -Weight: 6680 kg / 3700 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 11,000/3000/H1070 mm -Load capacity: 150 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel Size: 646/200-480 -Total dimensions: 12,300/3000/H1070 mm -Weight: 12960 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 11,000/3000/H1070 mm -Load capacity: 150 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel Size: 646/200-480 -Total dimensions: 12,300/3000/H1070 mm -Weight: 12200kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 11,000/3000/H1100 mm -Load capacity: 100 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel Size: 646/200-480 -Quantity: 4 pieces of heavy-duty transport trolleys available -Price: piece -Total dimensions: 12,300/3000/H1100 mm -Weight: 12960 kg

Hand screw press, mandrel press, screw press, hand screw press, printing press, balance printing press, 2-column press, column screw press -Manufacturer: Ageo, manual column screw press type 28/510N with solid base frame -Printing capacity: max. 28 tons -Stroke: 315mm -Intermediate size: 510 mm -Table size: 400 x 510 mm, groove width 22 mm -Pitch: 48 mm/rev. -Dimensions: Ø 1600 x H2040 mm -Total weight: 1024 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 6000/2500/H700 mm -Load capacity: 40 tons -Steering: double -Drawbar length: 1180 mm -Drawbar eye: Ø 40 mm -Wheels number: 16 pieces -Wheel Size: 425/150-305 -Quantity: 1 piece of heavy-duty transport trolley available -Price: piece -Total dimensions: 7140/2500/H700 mm -Weight: 3560kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 6000/2500/H600 mm -Load capacity: 40 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 16 pieces -Wheel Size: 425/150-305 -Quantity: 1 piece of heavy-duty transport trolley available -Price: piece -Total dimensions: 7160/2500/H600 mm -Weight: 3600kg