5 axis used for sale

M. No.: 6386927 Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife Hydraulic precision drives for knives and press beams Continuously adjustable pressing pressure with display 99 memory programs with up to 99 steps

Transnorm belt curve conveyor right GKF 90°-700-500-IR450 - NEW RA2312 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 450 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,67m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2020 Optionally available: Supports Sideguides Sideguides Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2020 condition: new Nominal / inner radius in mm: 450 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 0,67 scope of d ...

Roller conveyor, conveyor track, roller conveyor belt, roller conveyor -Roller conveyor: not driven -Roll width: 590 mm -Roller diameter: 50mm -Roller spacing: 275mm -Dimensions: 1200/620/H1110 mm -Weight: 61.5 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø90 x 30mm -Item No.: 858 762 65 -Heating power: 500 W -Voltage: 220 V -Dimensions: 230/160/H80 mm -Weight: 0.4 kg

WITH BASE CABINET Ser. No.: 12075 Book format: 320 x 220 mm (Max. 320 x 300 mm) Cover format: Cover size: 330 x 480 mm (Max. 330 x 680 mm) Book thickness: 2 - 50 mm Cycle speed: up to 300 cycles per hour Heat-up time: 30 - 40 minutes Equipment / Additional information: Adhesive: Planamelt R 1323-2

Specifications: Max. sheet width: 2500 mm Max. sheet thickness: 8 mm Weight, approx.: 6400 kg

Adjustable gearbox, variable speed gearbox, spindle gearbox, DISCO variable speed gearbox -Manufacturer: Lenze, DISCO adjustable gearbox -Type: 11 511 03 00 0 -Speed range: 1000-167 rpm for motors up to 0.37 kW / 1380 rpm -Dimensions: 228/163/H185 mm -Weight: 13 kg

Internal micrometer screws, micrometer screw, inner diameter, internal fine measuring instrument, cylinder gauge, -Handover: in its current condition as inspected -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Steel cabinet with 2 shelves -Width: 505 mm -Depth: 505 mm -Height: 870 mm -Door: lockable, without lock -Weight: 28 kg

Key data: 243 KW, 2200 1/min

We offer completely overhauled Scania DC/DI12-54/56A industrial engines in exchange. These engines have been certified by the Scania Service Partner overhauled with test bench certificate.We sell all engines in exchange.We sell for a surcharge even without returning old parts from the factory zeven/Germany. If you have any questions, please contact: MIW GmbH Engine Repair Plant Nord-West-Ring 8 27404 Zeven Geramny Phone:0049(0) 4281-950583 Mail: infoatmiw-zeven.de

Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel -Manufacturer: SIEMENS, Operator Panel OP20/240-8 -Type:6AV6 542-0BB15-2AX0 -Dimension: 250/235/H45 mm -Weight: 1.1 kg

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch -Manufacturer: Phoenix Contact, FL Switch Industrial Ethernet Switch -Type: SFN 5TX -Order No.: 2891152 -Voltage: 24VDC -Dimensions: 130/75/H30 mm -Weight: 0.3 kg

Tip height: 265 mm Center width: 1500 mm Circumferential Ø: over bed 540 mm Spindle bore: 65 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 9 - 1800 rpm Feeds: longitudinal/flat 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space requirement: 4580 x 1250 x 1330 mm Weight: 3200 kg

Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Input: 3x 380..500 V~ -10% 6% 50/60 HZ -Output: 3x (0-220/240) V~ 0..180 Hz 9.5A~ 400V -Dimensions: 100/340/H270mm -Weight: 4.7kg

Interface converter, converter, module converter, FL Comserver, interface converter, interface converter, interface converter, -Manufacturer: RSF, Converter -Type: ZEV 5 Ord.-No. 14 369 519 -Number: 3x converter available -Price per piece -Dimension: 230/60/H35 mm -Weight: 0.3 kg/pc.

Cutter ALPINA 500 VACUUM After capital renovation. 3-month warranty on parts. All bearings and sealings in this machine are new. General overhaul of the vacuum pump, actuators and hydraulic pump. New electrical cables. New hydraulic cables. New control panel and controls. New set of knives. Delivery time: 4 weeks - now during renovation. 15% prepayment.

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, geared motor with brake -Type: SK 530SU-80S/4BRE8 -Speed: 93 rpm -Power: 0.55 kW / 1380 rpm -Shaft: Ø 25 x 45 mm -Protection class: IP54 -Brake: 8 Nm -Dimensions: 435/200/H240 mm -Weight: 21 kg

Workbench, work table, assembly bench -Workbench: with drawers, solid construction -Width: 1255mm -Depth: 700mm -Height: 880mm -Drawers/cabinet doors: each 2x, lockable/without lock/key, see photos -Weight: 98 kg

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact power supply Quint Power -Type: Quint-PS-3x400-500AC/24DC/10 -Order No.: 2938617 -Dimension: 130/85/H130 mm -Weight: 1.1 kg

Dough laminator Dimensions: 2550x1000x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 500x1980mm Distance with adjustable roller: 1-45 mm Weight: 220kg

Table dough laminator Ital Form Dimensions: 2350x870x620mm Electrical power: 0.4kW Voltage: 220V 50Hz Distance with adjustable roller: 1-35 mm Weight: 150 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Kramp, hydraulic unit -Motor: Type EM100LB4-B14-500 3.0 kW / 1400 rpm -Individual components: see photos -Dimensions: 710/350/H340 mm -Weight: 53.1 kg

Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Face plate: Chuck size Ø 560 mm -Bolt circle: Ø 235 mm -Groove width: 22 mm -Through hole: Ø 140 mm -Intake: short taper 11 -Weight: 109 kg

drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, metal cabinet -Tool cabinet: steel cabinet with intermediate shelf -Width: 1055 mm -Depth: 510 mm -Height: 725 mm -Door: lockable, without key -Number: 1x cabinet available -Price: per piece -Weight: 48 kg

Table dough laminator Ital Form Dimensions: 2350x910x650mm Conveyor belt size: 500x1980mm Distance with adjustable roller: 1-40 mm Electrical power: 0.55kW Voltage: 380V 50Hz Weight: 130 kg

Key data: 45 °, 3500 mm, 1350 mm

Basic Cutting length 3500 mm Cast iron sawing unit type Z5 Max. saw blade (not incl.) 500 mm, max. 350 mm with scoring saw blade Scoring unit 120 x 20 mm Cutting height 90°: 175 mm, 45°: 120 mm 3 speeds: 3000/4000/5000 t/min 8D9Kjux2Mt Cutting width between saw blade and Z4 rip fence 1350 mm Z5 Cross Table (1505x760 mm) with Telescopic with Z5 Mitre Stop with 2 Folding Stops Comfort Pack on Cross Table with Extendable Workpiece Roll Frame table with extendable support and degree grid index system with length compensation Motorized height adjustment and inclined position of the saw blade incl. special accessories: Motor 9.2 kW Start/stop in the sliding table

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 500 liters Machine dimensions in cm: Length: 178 Width: 102 Height: 155 Electric power: 3 kW

Packaging machine BVM Compacta 5022 EMS; overhauled by BVM customer service; Welding width 500mm; Passage height 220mm; Conveyor belt approx. 3m with seesaw belt; Shrink tunnel SC 4530SD with plastic link belt and water cooling; Discharge belt 2m not overhauled is free of charge; 2 machines available. Packaging machine BVM Compacta 5022 EMS; rebuilt by the support of BVM; sealing width 500mm; hight 220mm; infeed belt 3m with rocker band; shrink tunnel SC 4530 SD with plastic band and water cooling unit; outfeed belt 2m for free but not rebuilt; two machines on stock.

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1000 liters Machine dimensions in cm: Length: 214 Width: 133 Height: 190 Electric power: 5 kW

Battenfeld HM 500/3400 Clamping force: 500t Year of construction: 2007 Shot capacity: 1937g Injection unit .../3400 Screw diameter: 85 mm Injection pressure: 1574 bar Shot capacity: 1937 g L/D ratio: 22 Clamping unit 500/... Clamping force: 500 t Plate size: 1590 x 1470 mm Distance between tie bars: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg Equipment: -1 x air valve -2 x core pull on the closing side, NW 6 -Interface for robot according to EUROMAP 67 -Integrated temperature control for the feed zone -Core pull movement and parallel ejection via DFEE auxiliary pump -Wear- and corrosion-protected plasticizing unit package -Potential-free contact parallel to the dosing unit

Vacuum machine, single chamber Efficient vacuum machine of exceptional quality for vacuum packaging of meat, cured meat products, fruits and vegetables Ideal for fast food facilities, hotels, restaurants and other catering facilities Dimensions: 540 × 490 × 540mm Heaters: 2 x 40 cm Electrical power: 1.5kW Weight: 59 kg

Working width: 630 mm Working height: 3 - 250 mm Motor output: 7,5 kW Feed speed: 7 und 14 m/min. Dimensions (length / width): 2700 x 1700 mm weight: ca. 1.450 kg Dust suction hood: 2 x 160 mm COMBINED PLANNING AND THICKNESSING MACHINE 546|100 Manufacturer description Solid German mechanical engineering Convenient planing and thicknessing without machine conversion, dimensionally stable and precise dressing tables, as there is a folding up omitted, for planing widths up to 630 mm and dual operation up to 315 mm each PANHANS solid steel cutter block with 4 Tersa reversible knives SURFACE PLANE: Table length 2555 mm, planed with toothed table lips Electromotive adjustment of the feed table via button with digital display the chip removal max. 5 mm Dressing fence can be inclined up to 45°, in an extremely smooth-running steel guide stored Dressing ruler, anodised, with swiveling auxiliary  ...

Roller conveyor, conveyor track, roller conveyor belt, roller track -Handover: in current condition as seen -Conveyor rollers: 1 piece is missing, see photos -Roller conveyor: not powered -Roll width: 740 mm -Diameter roll: 90 mm -Center distance: 610 mm -Total dimensions: 6020/960/H845 mm -Weight: 400 kg

Oven, doors single-sided, electric Dimensions: 3,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 54 kW Auxiliary heating: electrically indirect via thermoblock

Rexroth Type : 4281. 14 . 09903 . 97 3622-505045314 Kind. . No. 1190103 Stiebel Gear Type :4281.14.09903.97 Type.nr : 3622-505045314 Art.no : 1190103 From stock

Oven, doors single-sided, gas Dimensions: 4,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Recirculating air: Q = 12000 m³/h P = 2 x 2.2 kW Heat output: 69 kW Auxiliary heating: Gas indirectly via thermoblock

Table dimensions: 1.300 x 570 mm Courses (X/Y/Z) 1.050 X 570 X 510 mm - Number of tool stations: 30 - Rapid Traverse (X x Y x Z): 36 x 36 x 30 mm/min - Max. spindle speed: 12.000 rpm - Operating hours: 5.456 - Axes: 3

Offset printing machine Ryobi 526 GXP Year of Make: 2006 Format: 375 x 520 Print Count: 65 million Print Turn: 2-4 PDS E Autoplate Double sheet inspection Alcolor Dampening Mechanism Ryobimatic all washing facilities Technotrans Grafix Shed Feeder in production

- Auto power-off - Air blower - Chip conveyor - Spindle cooling (oil cooler) - 30 ATCs - Travel (X x Y x Z): 1.020 x 540 x 530 mm - Control: Fanuc 18iMB - Max. spindle speed: 12.000 rpm - Spindle type: BT 40

Variator Pulley, Vario Adjustment Pulley, Vario Belt Pulley, PIV Gear, Vario Gear, Variable Speed Pulley, Variable Pulley, Expansion Pulley, V-Belt Pulley Adjustable -Manufacturer: VEB, Vario belt pulley type E 502.22 -Outer pulley diameter: 220 mm -Inner diameter: 22 mm -Dimensions: Ø220 x 140 mm -Weight: 5.4 kg

turning diameter over bed: ? mm turning diameter over slide rest: ? mm turning length: ? mm total power requirement: ? kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,511,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with LoadMaster - Laser Type: fiber TruDisk 5001 - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 900 kg - Simultaneous positioning speed: 265 X+Y m/min - Laser Output: 5 kW - Maximum material thickness brass: 10 mm - Maximum material thickness cupper: 10 mm - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 25 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 60.443 h - Beam ON Working hours: 26.620 h - Weight: 12.000 kg - Electric consumption entire unit: 25 kW - Dimensions (long x wide x high): 8.800 x 4.800 x 2.400 mm

Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, valve amplifier, valve control, prop. amplifier -Manufacturer: Rexroth, Prop. Amplifier -Type: VT 5004 -PCB: VT 3002 -Dimensions: 200/60/H140 mm -Weight: 0.4 kg

Gear, gears, spur gear, spur gear -Manufacturer: PTI, gear, spur gear module 5 18 teeth -Type: M5 Z18 -Shaft holder: I pilot hole Ø 20 mm -Tooth width: 50 mm -Quantity: 2x gear available -Price per piece -Total dimensions: Ø 100 x 75 mm -Weight: 3.0 kg/pc.

B&A REF: 8759 TON: 200 SHOT WEIGHT: 297 SCREW DIAMETER: 50MM STROKE VOLUME: 353CM3 INJECTION PRESSURE: 2050AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, compact cylinders -Manufacturer: Festo, compact cylinder type ADNGF-25-50-PA 554236 -Stroke: 50mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm -Quantity: 1x cylinder available -Dimension: 105/40/H40 mm -Weight 0.3 kg

Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch, level switch, magnetic lock switch -Manufacturer: Igema, magnetic lock switch -Type: M 510-60 -Voltage: 6-230V AC / 6-42V DC -Quantity: 2x switches available -Price per piece -Dimensions: 110/50/H170 mm -Weight: 0.4 kg

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

Key data: 300 mm, 500 t, 350 mm

Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy.

Automatic loading up to 6.5m LoadMaster tube 6,5m with bundle cavity Minimal scratches for LoadMaster tube 6,5m Tube diameter 15mm LoadMaster Tube 6,5 (12mm semi-automatic) Ejection station 3m (incl. conveyor belt) Piece length +1,5m Workpiece tray Nitroline FocusLine ControlLine Laser power control Programmable cutting gas Lens cutting head with 150? focal length SeamLine Tube with interior detection Adaptive clamping technology - feed station Adaptive clamping - sliding chuck - Max. outside diameter of round tubes: 152 mm - Max. outer circle diameter of rectangular tubes: 170 mm - Max. raw material length for automatic loading: 6.500 mm - Max. finished part length: 4.500 mm - Max. workpiece weight: 20 kg - Laser Output: 2 kW - Laser Type: fiber TruDisk 2001 - Maximum material thickness brass: 3 mm - Maximum material thickness cupper: 3 mm - Maximum material t ...