128,272 used machines on RESALE, but how to find them? Machine Search
dimensions of saw-band: 4640x34x1,1 mm : 15-100 m/min : 515 mm capacity 90 degrees: round: 330 mm capacity 90 degrees: square: 320 mm capacity 90 degrees: flat: 510x320 mm : 320 mm : 320 mm : 350x320 mm : 230 mm : 230 mm : 230x310 mm : 320 mm : 320 mm : 380x320 mm : 250 mm : 250 mm : 250x320 mm total power requirement: 4 kW Weight: 1190 kg Overall size: 2000x1200x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suction: 580 l/min. Filling capacity: 470 l/min On / switch-off: 13/15 bar Heads / stages: 2/2 container volume: 90 l voltage: 400 V / 50 Hz engine output: 4 kW turning speeds: 915 U/min Sound power level: 95 dB dimensions: 1110 x 495 x 1000 mm weight: 111 kg - easy to move thanks to castors and long handle - mobile, V-belt driven piston compressor - Compressor for work up to 15 bar - equipped with filter pressure reducer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MAIN MOVEMENTS Maximum drilling depth - Z-axis: 500 mm Table, longitudinal movement - X-axis: 300 mm Table, vertical movement - Y-axis: 300 mm Drilling slide, piece support - W-axis: 50 mm DRILLING SPINDLE Drilling diameter without pre-drill, optimal: 3 – 12 mm Distance between the bits: 250 mm Drilling spindle, rotation speed min - max: 0 - 6.000 rpm Drilling spindle motor power: 7.5 kW (S1) Cannon drill holder, for diameters less than 6 mm: Ø 10 x 40 mm Cannon drill holder, for diameters greater than 6 mm: Ø 25 x 70 mm CLAMPING TABLE Fixed clamping table, surface dimensions: 500 x 600 mm Maximum load capacity of the fixed table: 1.000 kg Standard type clamping slots: 18 mm OIL Cutting oil flow rate: 50 lt./min Cutting oil pressure: 90 bar Hydraulic pump motor power: 7.5 kW Hydraulic pump motor capacity: 600 lt Adjustable temperature: 27°-30°C DIMENSIONS AND ...
table diameter: 715 mm table load: 500 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-110 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 675 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used packaging machine by Multivac model R 530. New 2007. Throughput up to 10 bars/min (8 pcs/min). Format Wedges Film machine : - bottom hard width 450 mm, thickness 400 µm - upper soft width 450 mm, thickness 88 µm Included: - templates for product insertion - traverse for printing on packaging with Hitachi printers - spare cutting bar sharpened by Multivac packed in a box - spare sealing plate - spare seal for sealing mould - inserts for changing the depth of the extruded film - basic set of spare parts - documentation and instruction manual Media connection : - current : 400v Rated power 20.5kW Rated current 47A - Air: Pressure min. 6-7 Bar - water: pressure approx. 3 Bar flow rate 2l/min Dimensions: L 9600mm W 1100mm H 2070mm
Material conveyor belt LT-500 | Inclined conveyor belt for material feeding for granulators and other applications. Movable, very stable design, height-adjustable at the outlet. Working width: 500 mm Working length: 4000 mm Working speed: 15 m/min. Maximum head: 2200 mm Gearbox: Bonfiglioli 0,75 kWt Weight: 320 kg
XYZ SMX 5000 CNC bed milling machine was built in 2016 in the UK. The machine for precision machining of workpieces with a maximum weight of 850 kg is made from a uniform cast iron, which guarantees excellent rigidity and stability during even the most intensive machining. The enclosed workspace includes a large work table with a length of 1930 mm and a width of 355 mm, a reliable spindle and a tilting work head. All this is complemented by a CNC control with integrated CAD functions, which significantly simplifies everyday machining. The XYZ Machine Tools SMX 5000 CNC milling machine weighs 3570 kg. Technical specifications of the XYZ SMX 5000 milling machine - feed in the X/Y/Z axis: 1500/600/580 mm - rapid traverse in X,Y,Z axis (CNC): 6.3 m/min - rapid traverse in X,Y,Z axis: 3.8 m/min - work table dimensions (L x W): 1930 x 355 mm - maximum workpiece weight: 850 kg - number ...
LHS Lagertechnik, supplier of new and used storage technology. We provide you with racking systems, industrial trucks, accessories and other warehouse inventory. In this ad, you will buy as follows: - 1 piece electric pallet truck - Manufacturer: Jungheinrich / Type: ESE 533 - Year of manufacture 2015 / Serial number: 91594090 - Hours: 10887, 12579, 14044 - Lifting capacity: 3,300 kg - Lifting height: 115 mm - Operating length: 4,895 mm - Operating width: 1,000 mm - Fork length: 3,600mm - Net weight: approx. 3,500 kg - Battery: 48 Volt 1000AH / 10 EPZB1000SC - External charger included NEW UVV test If required, 2 additional ESE 533 pallet trucks are available. Price gross incl. 19% VAT ex warehouse Kaarst, invoice with stated VAT will be issued Self-collectors welcome / Free loading / Shipping can be organized nationwide with low-loader & ground-level unl ...
Cutting height: 205 mm Motor output: 11 kW cutting width: 450 mm Cutting length: 5200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
arm length: 4000 mm weight max. in kg: 500 kg swivelling range: . Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 44 with wall bracket The techn. Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 t stroke: 7000 mm clamping width: 17508 mm Height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Overhead traveling crane number: 94283910About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
LHS Lagertechnik, supplier of new and used storage technology. We provide you with racking systems, industrial trucks, accessories and other warehouse inventory. In this ad, you will buy as follows: - 1 piece electric pallet truck - Manufacturer: Jungheinrich / Type: ESE 533 - Year of manufacture 2015 / Serial number: 91594091 - Hours: 12579 - Lifting capacity: 3,300 kg - Lifting height: 115 mm - Operating length: 4,895 mm - Operating width: 1,000 mm - Fork length: 3,600mm - Net weight: approx. 3,500 kg - Battery: 48 Volt 1000AH / 10 EPZB1000SC - External charger included NEW UVV test If required, 2 additional ESE 533 pallet trucks are available. Price gross incl. 19% VAT ex warehouse Kaarst, invoice with stated VAT will be issued Self-collectors welcome / Free loading / Shipping can be organized nationwide with low-loader & ground-level unloading / Pleas ...
Cooling capacity: 3000 kcal/h coolant: dest. Wasser tank: 7,7 l volume capacity: 3 l/min operating pressure: 3,25 bar connected load: 0,5 kVA connected load frequency: 380 V • water circulation for destilled water or for water with anti-freeze and anti-corrosion protection, new-valued, was only used for testing purposes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
LHS Lagertechnik, supplier of new and used storage technology. We provide you with racking systems, industrial trucks, accessories and other warehouse inventory. In this ad, you will buy as follows: - 1 piece electric pallet truck - Manufacturer: Jungheinrich / Type: ESE 533 - Year of manufacture 2015 / Serial number: 91594092 - Hours: 14044 - Lifting capacity: 3,300 kg - Lifting height: 115 mm - Operating length: 4,895 mm - Operating width: 1,000 mm - Fork length: 3,600mm - Net weight: approx. 3,500 kg - Battery: 48 Volt 1000AH / 10 EPZB1000SC - External charger included NEW UVV test If required, 2 additional ESE 533 pallet trucks are available. Price gross incl. 19% VAT ex warehouse Kaarst, invoice with stated VAT will be issued Self-collectors welcome / Free loading / Shipping can be organized nationwide with low-loader & ground-level unloading / Pleas ...
bore capacity in steel (diameter): 25 mm throat: 240 mm bore stroke: 110 mm turning speeds: 125 - 2850 U/min : 310 x 320 mm distance drilling head - clamping area: max. 650 mm total power requirement: 0,75 / 400 kW / Volt weight of the machine ca.: 0,175 t dimensions: 0,95x0,8x1,75 inkl. Tisch m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 370 mm bore stroke: 200 mm spindle taper MT: 4 MK table:: 580 x 460 mm column diameter: 160 mm turning speeds: 75 - 2020 U/min feeds: 0,1 - 0,2 - 0,3 - 0,4 mm/U total power requirement: 1,5 kW weight of the machine ca.: 700 kg. range L-W-H: 1,1 x 0,6 x 2,35 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Belt conveyor, Herber, approx. 3.63m long – used - Price ex location (net): only 795.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos45 Manufacturer: Herber Type: GF-210-NB-500 MA Year of Make: 2010 Length: approx. 3.63m Nominal width: approx. 500mm Element width: approx. 60cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony
capacity 90 degrees: round: 510 mm capacity 90 degrees: square: 480 mm : 610 x 450 saw band length: 5320 x 34 x 1,1 mm band speed: 15 - 100 m/min table height: 820 mm total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,8 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press force max.:: 1.000 kN heating plates:: 500 x 500 mm electrically heated:: °C heating power:: kW piston stroke:: ca. 500 mm no. of stages:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: -- mm cross-section heigth:: -- mm feed:: -- mm speed of feed:: 0,4 - 20 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Belt conveyor, Herber, approx. 4.10m long – used - Price ex location (net): only 825.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos46 Manufacturer: Herber Type: GF-210-NB- 500 MA.bl Year of Make: 2010 Length: approx. 4.10m Nominal width: approx. 500mm Element width: approx. 60cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony
Ascend conveyor / belt conveyor, Herber, approx. ?.10m long – used - Price ex location (net): only 825.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos47 Manufacturer: Herber Type: GF-210-NB-500 MA Year of Make: 2010 Length: approx. ? Nominal width: approx. 500mm Element width: approx. 60cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony
Machine Details Warehouse number 1105-03364 Machine type lead and pull spindle lathe Make CAZENEUVE Type HB 525 X 1000 Year of construction 1965 Conventional control type Storage location HAGUENAU Country of origin France Delivery time Immediate Freight base EX WAREHOUSE Technical details Turning diameter over bed 500 mm Turning diameter via support 220 mm Turning length 1000 mm Spindle speeds 25-2000 rpm various accessories YES Information IN GOOD WORKING CONDITION LOT OFF ACCESSORIS WITH MULTIFIXE TOOL HOLDER SYSTEMS
round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1025 mm, 1540 , 1090
Machine type: EVP 550 Manufacturer: ERBA Power kW: 4.0 Total volume: 585 lt. Description: The EVP 550 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has a fully automatic PLC process control (optional) and, on request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligat ...
centre distance: 5000 mm turning diameter over bed: 4000 mm turning dia. in gap: 5000 mm spindle bore: 104 mm turning speeds: 1,4 - 71 (18x) U/min total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw face plate Ø 3.150 mm modular lathe! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
container volume: 600 l internal dimension: 1500 x 740 x 780 mm dimensions of the machine ca.: 1900 x 810 x 860 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 4000 mm, 5000 mm
Specifications Control SIEMENS SINUMERIK 840 Dsl Main dimensions and travels Face plate diameter 4,000 mm Circumferential diameter (max.) 5,000 mm Workpiece height (max.) 5,000 mm Total height of the machine 9,250 mm Maximum workpiece weight 80,000 kg Table base Y Horizontal table displacement 2,500 mm Crossbar Vertical adjustment of the crossbeam 3,200 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support - 2740 + 2740 mm Vertical displacement of the chisel slider 1,800 mm Cross-section of the chisel slider 250x210 mm Side Support (Right) Vertical adjustment support -25 + 2170 mm Horizontal displacement of the chisel slider 1,000 mm Cross-section of the chisel slider 250x210 mm Turning diameter max./min. 4,500/2,500 mm Main Drive: Main motor power 100 kW Face plate speed range 0.63 – 63 rpm. Maximum torque at the ...
Bus node, brand new, CPX-FB14, 526174, Original Festo, new Special price ! Attention: Original Festo product, no replica from.. The parts were taken from a brand new valve assembly in its original packaging and are completely as new. We still have several identical and many other Festo components, but the quantity is ending. Buy more than 1 position there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law a ...
faceplate diameter: 510 mm max. pitch circle: 171,4 mm camlock: Gr. 8 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 550 mm y-travel: 1200 mm z-travel: 450 mm control: 85er 8bit total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3.400 mm y-travel: 1.250 mm z-travel: 2.000 mm Control: TNC-430PA table-size: 4.700 X 1.200 mm V- travel: 500 tool taper: ISO 50 milling head -swivable: 0.001º/0.001º Grad main drive: 37 kW Chip coveyor: inkl handwheel: HR-410 Tools changer: 60 pos. milling head: Automatic Head 45º weight of the machine ca.: 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Analog module, brand new, CPX-4AE-P-D10, 560362, Original Festo, new Special price ! Attention: Original Festo product, no replica from.. The parts were taken from a brand new valve assembly in its original packaging and are completely as new. We still have several identical and many other Festo components, but the quantity is ending. Buy more than 1 position there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Aust ...
With matching spacer rings according to photos. Scope of delivery according to photo 1.
Backhoe loader, multifunction device with engine damage otherwise good substance, new tyres at the rear
The container has two saddle feet, a manhole DN 600 with dome lid, is used and emptied inside and professionally cleaned. Dimensions: D = 2.50 m - L = approx. 10.70 m On request, the container can be completely equipped with an extinguishing water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - consisting of: - 1 suction line DN 125 with A-fixed coupling according to DIN 14319 with special closure for fire brigade tricant keys incl. a ball valve 4", - 1 pcs. sleeve incl. ball valve welded into the highest point of the suction line (for ventilation of the suction line), - 1 pc anti-vortex plate mounted on suction line, - 1 pc sign "Extinguishing water extraction point", - 1 pc vent pipe DN100 with hood, - 1 pc bearing tube with dipstick for measuring the level, - 1 pc dome lid with screws an ...
Electronic module, brand new, 533360, Original Festo, new Special price ! Attention: Original Festo product, no replica from.. Current market price: approx. € 94 Excl. VAT The parts were taken from a brand new valve assembly in ist original packaging and are completely as new. We still have several identical and many other Festo components, but the quantity is ending. If you buy more than 1 item you will get a great discount. If you have a UID number, we will gladly issue an invoice without VAT. 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms ...
x-travel: 3500 mm y-travel: 900 mm z-travel: 1000 mm Control: heidenhain tnc 415B total power requirement: 22 /spindel kW weight of the machine ca.: 16.5 t dimensions of the machine ca.: 7.2x3.9x3.2 m Make SORALUCE Type Soramill SL 5000 Built in 1995 Control type HEIDENHAIN TNC 415 B Table size (mm) 5000 x 800 mm X out (mm) 3500 Y-off (mm) 900 Z-off (mm) 1000 Maximum table load 12,5 ton Speed (RPM) 20-. 2,000 Tool holder ISO 50 Feed along (mm/Rev) 5 - 10000 mm / min. Rapid traverse 12 mtr/min. Gesamtleistung(kW) 22 Length (mm) 7250 Width (mm) 3900 Height (mm) 3200 Weight 16500 kg Additional information Automatically indexierender Swivel Head with 2 x 144 positions (2.5 ° pitch) in two levels above the control programmable Cooling medium institution The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Differential pressure gauge, A2G-15, -50/0/50Pa, Wika, mint condition -30% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Differential pressure gauge, A2G-15, -50/0/50Pa, Wika, - Output 4-20mA - Max. Pressure 20kPa 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court ...
turning diameter over bed: 560 mm turning diameter over slide rest: 355 mm turning length: 1500 mm spindle bore: 80 mm spindle turning speed range: 25 - 1600 U/min turning dia. in gap: 785 mm metric threading: 0,2 - 14 mm thread - inch: 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 130 mm quill stroke: 120 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 1,20 x 1,5 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 jaw chuck 4 jaw ...
approx. 5.500 pieces, folding box, Euro stacking container, Bekuplast, 600 x 400 x 285 mm, grey - used - : Price per item from location (net): Minimum purchase 3 pallets (min. 384 crates): only 6.-€ (net)! 9 pallets a (min. 1,152 pieces): only 5.- € (net) for complete acceptance: only 4.50 (net)! Manufacturer: Bekuplast Type: Clever-Retail-Box 56 ltr. 63843 Niedernberg Year of manufacture: unknown External dimensions: 600 x 400 x 285 mm (65 mm high when folded) Internal dimensions: 565 x 365 x 275 mm Sides and bottom closed coarsely ribbed sandwich base with welded panel in grey Colour: grey 401 Bottom: Sandwich floor Sides: closed Handles: open Material: PP-C (Polypropylene Copolymer) Industrial: Yes Weight: 2,955 kg 1 pallet packed approx. 2m high = approx. 128 crates, 1 pallet packed approx. 2.40m high: approx. 156 crates Condition: good, wit ...
X-axis: 13,000 mm Y-axis: 4,500 mm Z-axis: 1,000 mm Distance between stand: 6,500 mm C-axis: 190º A-axis: 110º Rapid speed XYZ: 15,000 mm/min. Rapid response AC: 10 tpm CNC control: Siemens 840D Spindle mounting: HSK A63 Spindle speeds: 30,000 rpm. Spindle power: 20 kW Tool changer: 20 positions Torrestool tables: 16 pieces X-axis: 11,500 mm Y-axis: 3,500 mm Z-axis: 750 mm Country of origin Spain Machine dimensions LxWxH: 19,000 x 11,000 x 6770 mm Machine weight: 70,000 kg
Machine Type: CNC Lathe Manufacturer: GILDEMEISTER Type CTX 500 S2 Year of construction 1998 Control CNC Pilot Heidenhain Country of origin Germany Delivery time by arrangement Freight base from location Technical details Turning diameter max. 445 mm Turning length 1,000 mm Control CNC Pilot Heidenhain Circumferential diameter 680 mm Main spindle: Speed range – main spindle 18 - 3,600 rpm/-1 Drive power – main spindle 23 kW Max. torque 650 Nm Spindle nose 220h5 Chuck diameter 315 / 400 Spindle bearing diameter 140 mm Spindle bore 107 mm Tool turret: Number of tool positions 12 pos. Tool holder 40 DIN69880 Travel: x-travel 320 mm z-travel 1,097 mm Tailstock: Quill stroke 120 mm Tailstock mount MK 5 Quill pressure 14 kN Feeds: Rapid traverse X : 24 / Z : 30 m/min Feed force X: 8 / Z: 15 kN Total power requirement 58 kVA Machine weight approx ...
Instrument for gas chromatography AGILENT mod. GC/ MS 7890/5975 Including: Agilent 7890GC Agilent 5975 C MSD EI Source and Diffusion pump Injector Tray etc. Refubished
roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...
Air compressor Planet Air L 550 with dryer KT 700; good condition; 550L/min.; 10 bar; incl. air dryer KT 700. Compressor Plant AIr AL 550; good condition; volume 550L/min.; 10 bar; with air dryer.
floor-plate length: 5000 mm floor-plate width: 1800 mm floor-plate height: 290 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
