128,649 used machines on RESALE, but how to find them? Machine Search
Double Knife Guillotine Manufactured by Monguzzi/Fisher+Ruckle Model: TRM-2L-3800
Complete Veneer Peeling Line Working Length: 3300 mm
Battenfeld Calzoni Hydromotor MRE5400/5401/33800 A1640538
Laminator 380 Plus • Automatic feeder with suction head • Inlet stacker • Automatic sheet separator • Film trimming device (includes cutting and trimming blade) • Chrome plated rolling roll •Touch screen • Anti-bend system • Fans for cooling after the grille • Stamping system included used foil rewinder • Hydraulic rolling roller pressure Specifications: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 – 42 μm Film mandrel shaft: Ø75 mm Maximum film reel diameter: Ø340 mm Material Weight: Digital printing paper: 135 – 350 g/m² Other paper: 157 – 350 g/m² Maximum format: 390 x 520 mm Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Top rolling roll diameter: Ø120 mm (chrome plated and polished) Lower rolling roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC – 5 ...
Folding machine 360 Touch screen Electronic variable speed drive Flat pile feeder, with head suction Compressor Rotary Suction Double Sheet System Antisound covers Stream delivery Machine specially designed for the folding of brochures, allows a minimum fold of 20 mm Spiral rollers (to avoid wrinkles) similar to MBO Module to launch the narrow folds to the 2nd unit (if machine has 2nd unit) Vertical delivery stacker for optional microfolding Technical specifications Max. Format: 360 X 850 mm Min. Format: 85 X 100 mm Min. Folding: 20 mm Max. Speed: 180 m/min Paper thickness: 40-250 grms Weight: 1500 kg Can be configured from 4 to 12 buckles in a single unit (Also available model 470)
SCHLEUNIGER WireTwister 3300 AD wire twisting machine built in 2016 in China offers unparalleled twisting performance, thanks to the use of high-quality components and high-tech solutions. The machine, designed for the production of twisted pair cables, is also very simple and convenient to use. The ends of the untwisted wires are simply loaded into the holders and the twisting head respectively. The SCHLEUNIGER wire twisting machine pulls the wire very accurately to the programmed position, after which the head twists the wires with programmable tension control. At the end of the process, the holders automatically eject the twisted pair into the integrated storing channel and the taker returns to its initial position. The SCHLEUNIGER WireTwister 3300 AD wire harness machine is brand new and originally packaged. The photos and video shown in the offer are for reference – they repres ...
Double grinding machine TS 300 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm 230 - Speed (1/min): 1250 - Three-phase motor 400 V / 2.2 kW: operating mode S2-30 min (short-term operation) - Extraction motor 0.55 kW, suction power 350m³/h - Weight (kg): 90 Shipping time:immedia ...
Used storage heater Manufacturer Seipp Type UAGG 390- heats workpieces and ball bearings up to XXX kg With various yokes in different sizes Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturer, mechanical engineering, transport sector Voltage / Frequency / Power: 380 V / 50Hz / 35A Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearing max. xxx kg (other workpieces xx kg) Inner diameter 15/120 mm Outer diametermax. xxx mm Width max. xxx mm Automatic temperature: Magnetic sensor, control range 60 °C to max. 160 °C Aperture priority: Bays: Edge length 80mm, 70mm, 60mm, 40mm, 30mm, 20mm, 15mm - Induction heater - induction heater Special price
Servo Electric punching head Large format 3000 x 1500mm With Sheet Master & Duplex carts Year: 2015 Just under 19,000 hours! With tooling
Make: YORK Type: YCSA-150-TP-380T BLUE FIN Year built: 2010 Power: 155kW Coolant: R410A 4 pieces Copeland Scroll compressors 4 pieces of fans 2 circles With WILO circulation pump 1 condenser is leaking! Price on request Contact details can be found under Contact
Key data: 530 mm, 500 mm, 4000 1/min
Machine Details Stock-No. 1105-04005 Type of machine CNC Lathe Make COLCHESTER Type TORNADO 300 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 530 mm turning length 500 mm control FANUC OT total power requirement 22 kW weight of the machine approx. 3.3 t Additional information GOOD MACHINE CNC CONTROL FANUC OT Cuck Taikstock VDI 40 Turret 12 P Chip Convoyer echnical information Swing over bed 530 mm Swing over cross-slide 330 mm Distance centre tot centre 500 mm Max longitudinal travel Z-axis 20 m/min Max cross travel X-axis 10 m/min Spindle cone A2-8 Dia of spindle bore 90.5 mm Power on the spindle 22 kW Number of speeds 4000 rpm Command Fanuc Total power needed 53 kVa Length 3500 mm Wid ...
Rated power at 50%ED: 63kVA Short-circuit current: 31kA Electrode force: 730daN / double stroke Extension: 500mm --- - Electrode arm top-straight D45/25/500g - Electrode arm bottom-straight D45/2/500g --- Welding control: MPS 10 (5-times, 8-program) --- Spring pull on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Type: New Boiling Melting Fat 300 Liter Completely stainless steel Integrated mixing system Double insulating wall Possibility of boiling the mass Volume: 300 liter Machine dimensions in cm: Length: 161 Width: 124 Height: 123 Delivery time: 1 working day after advanced payment
complete device Flow temperature max 55 C° Engine 1.05kW-230/400V 50 Hz was attached to DMG MORI we have even more suction systems. Please ask.
Compact bridge sawing machine with five CNC controlled axes - sawing / drilling / milling / grinding and polishing with a single machine. A universal machining centre for the processing of natural stone, e.g. granite, marble, travertine and basalt – artificial stone – ceramic slabs CNC control with 15" touch screen and color screen, the five interpolating axes allow for complex machining. Many software tools are included in the scope of delivery, for quick and easy programming (so-called "macros", i.e. pre-programmed editing programs) of – longitudinal and cross-sections – 45° oblique cuts – circular cuts – ellipse cuts – arc cuts – software for drilling – special software for machining kitchen worktops – special software for ceramic processing (tiles + slabs) – special software for engraving work. Remote control console for the control of manual movements, f ...
Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-3015-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...
TECHNICAL DATA: Max working length mm: 3100 Min workable length mm: 500 Tilting blade: 0-45 ° Blade diameter max mm: 300 02 Saw aggregates Ø 300 + 02 Scoring aggregates - Ø 120 Central Saw Aggregate Automatic destacking 4-axis numerical control Total electric power KW: 10 Weight Kg: 2200
The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system ...
Watson Marlow 323S/D Peristaltic Pump Factory price 9890 The 323 Series pumps feature a chemical-resistant ABS top and IP31 protection, as well as a membrane keypad to control the pump and a digital LCD to display the speed. 323S High Performance Pumps with Manual Control Universal pump for precise dosing or transfer tasks Flow range: 0.1-2000mL/min. Speed range: 3 to 400 rpm (adjustable in 1 rpm increments) Display Type: LCD Reversible yes The 323 Series pumps feature a chemical-resistant ABS top and IP31 protection, as well as a membrane keypad to control the pump and a digital LCD to display the speed. Dimensions (L x W x H) 230 x 230 x 132 mm Condition: used You can find more laboratory equipment - new and used - in our shop! International shipping costs on request!
Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may vary
STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5
3000 x 1500mm Truflow 5000w Auto nozzle changer Auto pallet changer
EUROMETAL HGS 6×3200 NC hydraulic guillotine shears built in 2012 are used for precision sheet metal cutting with a maximum thickness of 6 mm. The machining process is performed by precision cutting knives with an option to adjust the gap between the blades while the upper cutting knife is mounted on a swing beam. This solution allows the machining of both steel sheets and workpieces made of non-ferrous metals. The simple design with efficient hydraulic system additionally ensures trouble-free operation throughout the entire lifetime, while at the same time maintaining the highest cutting quality. The EUROMET HGS 6×3200 NC guillotine shears weigh approximately 6600 kg. Technical specifications of the EUROMETAL HGS 6×3200 NC guillotine shears - maximum workpiece length: 3200 mm - maximum workpiece thickness: 6 mm - cutting angle: 1°30′ - stroke rate: 14/min - cutting blade l ...
Cast iron beds Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T
distance between spindle and coloumn 1600mm max drilling diameter 50mm machine in good conditions cube included
Key data: 2400 KW, 3000 kVA, 400 V
ENGINE: MTU 20V4000G63 FREQUENCY (HZ): 50 VOLTAGE (V): 400 POWER: 3000kVA / 2400kW CYLINDERS: 20 STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 24500kg DIMENSIONS L/W/HEIGHT (MM): 830029502550 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with ...
Multiskan FC Microplate Photometer with Incubator A wide range of applications, from enzyme kinetic studies to Lowry assays The Multiskan FC covers a wavelength range of 340 to 850 nm, allowing for a wide range of applications, from enzyme kinetic studies to Lowry assays. The device takes fast and accurate measurements. For example, the complete measurement of a 96-well plate is possible in less than seven seconds. The device is equipped with a linear shaker as standard. An incubator model reaches incubation temperatures up to 50°C and is capable of reading 384-well microplates. SkanIt software supports the optimal use of the device through a visual workflow, effortless data analysis, and export capabilities. Characteristics In addition to the common features of all microplate readers, the Multiskan FC offers: SkanIt Software The SkanIt software can be used to control the ...
Manufacturer: Kemppi (Finland) Power: 5 - 300 Amp semi-automatic electrode welding machine Welding pliers new! (length approx. 4.70 m) Ground cable new! (length approx. 3.70 m) Connection cable 5 pole new! (length approx. 2.90 m) Note: There are 3 equivalent devices in stock! The price refers to the unit price! (Changes and errors in the technical data and prices reserved!)
The scope of delivery includes: 01x Wire mesh, used Material colour: sendzimir galvanised Version: laid up Total depth: approx. 1,218 mm Inner depth: approx. 1,203 mm (bearing rod direction) Column depth: approx.: 1,200 mm Clear span: approx.: 1,095 mm Width: approx.: 1,370 mm Truss support: approx.: 54 mm Mesh size (1): approx.: 130 x 55 mm Mesh size (2): approx.: 110 x 55 mm Material thickness wire: approx.: 4.00 mm Number of bars: 11 pcs. Dimensions: 1.095x50x1.5mm Weight / piece: approx. 13.07 kg General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
• Height: 850 - 1000 mm • max length: 2400 mm (extendable) • max. static support load: 225 kg • Dimensions (LxWxH): 1600 x 600 x 850 mm • Weight: 30 kg • Electrical connection: 230 V / 50 Hz • for crosscut saws, belt grinders, cutting saws, etc. • Installation and adjustment without tools • foldable feet for space-saving storage or transport • Quick clamping ssystems enable quick conversion, e.g. for cutting down long workpieces The list price for this work table is € 139.00 (plus VAT). (Changes and errors to technical data and prices reserved!)
Demo Machine Specifications: Dimensions - 1300 x 1560 x 1210 mm, (with built-in drive and control cabinet) Dimensions of the packed machine - 1500 x 1800 x 1320 mm, External dimensions of the mill drum - Ø870 x 1120 mm, Distance between bearings - 1260 mm, Height of the drum axis - 860 mm, Operating capacity - 600 dm3, Weight of the machine - 641 kg, Installed power - 5.5 kW, Input voltage/frequency - 400V/50Hz, Connector - 32A; 400 V Milling time range - 1s... 99h59min, Mill installed on a steel frame, Drum made of 10 mm steel without inner lining. including first filling 80 mm steel balls Technical specification: Dimensions - 1300 x 1560 x 1210 mm, (with drive and control cabinet installed) Dimensions of the packed machine - 1500 x 1800 x 1320 mm, Mill drum external dimensions - Ø870 x 1120 mm, ...
20098 SCANIA DI 13 080 M - 300 HP - 1600 RPM SN 6862812 Engine Info Listing ID 20098 Make SCANIA Model DI 13 080 M Serial No. Cylinders 6 V / Inline LINE Power 300 HP RPM 1600 RPM General Info Condition Runner Application Marine Weight (kg) 1700 KG Cooling WATER COOLED
COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE
Flexo Lombardi machine (print width 330 mm/web width max. 350 mm, 7 UV inks) Number of colors: 7 Print width: 350 mm Year of Make: 2019 Anilox rollers: 10 pieces Printing rollers/magnetic cylinders 4 sets 85z, 98z, 109z, 127z Printing plate thickness 1.14mm Pre-installation, video control, centrally controllable from the monitor and on the individual units, cooled rollers, movable laminating and printing sections from the gluing side, one punching station) The machine is in very good technical condition. You are welcome to arrange a viewing. If you are interested, I will be happy to send you more information and photos. Specyfication: Voltage/Power supply frequency 400 Volt / 50 Hertz Power capacity with UV drying system Kw 102 Mechanical speed 200 m/min Number of operators allowed 1 Max reel width mm 350 Max reel diamet ...
Key data: 1000 , 194 , 45
Manufacturer: Arburg Type: 420 C 1000 - 350 Built: 1999 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool installation height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 45 mm Lifting volume: 230 cc / 194 gram PS Spray pressure: 1670 bar General Engine: 22 kW Heating: 8.8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 3430 kg Screen text: German
This is a solidly built stainless steel work table open on all sides, 6 adjustable feet, with a shelf and an upstand of 50mm. Due to its solid construction, it is also very suitable for food production companies. The work table is new and unused, still foiled. The price quoted is net plus 19% VAT. OUR USED EQUIPMENT SERVICE FOR YOU: •High-quality brand-name appliances at fair prices •Professional overhaul / inspection & expert cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected •Competent advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 seal SPECIFICATIONS: •External dimensions WxDxH: 3400x700x900mm •Backsplash 50mm •open on all sides •a shelf Condition: New, unused VE ...
Part Number: 7316 SPECIFICATIONS - Track width 350mm - working width of the shaft with saws 355mm - max blade diameter 450mm - max cutting height 170mm - blade bore diameter 70mm - table top dimensions 1850x790mm in advance: -Triggers - 2 slip shafts, smooth, metal - shaft with saws - 3 slip shafts, smooth, metal From below: - guide strip -Triggers -caterpillar - Pulling gear shaft, metal - central lubrication, electric - Infinitely variable feed speed - electric body lifting up/down approx. 1kW - feed motor 2.2kW - main motor 75kW - total dimensions length/width/height 2600x1800x1700mm - weight 2700kg – used multi-rip saw – very good condition Net Price: 68900 PLN Net price: 16000 EUR calculated according to the price of 4,30 euros (With higher fluctuations the price may change)
Key data: 1300 , 166 , 40
Manufacturer: Arburg Type: 420C 1300 - 350 Built: 2000 Control: Selogica Closing type: Hydraulic Closing force: 1300 kN Tie bar ratio: 420 mm x 420 mm Plate size: 605 mm x 605 mm Tool installation height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 40 mm Lifting volume: 182 cc / 166 gram PS Spray pressure: 2120 bar General Engine: 22 kW Heating: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 4080 kg Screen text: German Optional extras Robot interface Core pull x2
Machine Type: Circular Saw Manufacturer: Kaltenbach Type: SKL 350 Year of construction:- Condition: used Offer will only be sent if a complete imprint is provided! Price 1.190 Euro incl. VAT Location Warstein , Germany Reference M-KAL-0724 DESCRIPTION We offer you a used circular saw from the manufacturer Kaltenbach. Technical data will follow. Availability: from 01.08 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
Key data: 800 , 149 , 35
Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1
maximum number of results exceeded
please refine your search
