40 bar used for sale

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , Generator KVA: 400 , Generator Hz: 50 , Generator Volts: 380 , Generator Amps: 608 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/cummins-kta1150-g2-generator-4 00kva-used/734, , = More information =, , Empty weight: 2.500 kg, Type number: KTA1150-G2 GENERATOR 400KVA

Engine Brand: JOHN DEERE, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 120 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/john-deere-4045hrt90-new/2 2398, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 4045HRT90; Transport weight [kg]: 710

Engine Brand: MERCEDES, Condition: USED, Engine Injection Type: MECHANISCHE INJECTIEPOMP , Engine Aspiration Type: TURBO , Bore: 128 mm, Stroke: 142 mm, Engine Capacity: 14618 cc, Qty Cylinders: 8 Qty, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Orange , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 254 Kw, Rated Speed: 1900 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mercedes-om442-901-400-use d/330, , = More information =, , Type: Engine, Year of construction: 1010, Type number: OM442.901-400; Transport weight [kg]: 1090

Engine Brand: MERCEDES, Condition: USED, Nominal Power @ Nominal Rpm: 254 Kw, Engine Injection Type: MECHANISCHE INJECTIEPOMP , Engine Aspiration Type: NATUURLIJK AANGEZOGEN , Bore: 125 mm, Stroke: 142 mm, Engine Capacity: 20900 cc, Qty Cylinders: 12 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mercedes-om-404-901-000-us ed/806, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: OM 404.901-000; Transport weight [kg]: 1950

grinding length:400 mm workpiece weight:250 kg weight of the machine ca.:4,1 t swing diameter:250 mm grinding spindle speed:2387, 2938 U/min

Engine Brand: JOHN DEERE, Conditie: RECONDITIONED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Engine Condition: Rebuild , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: No , Starter Voltage: No Starter Present , Rated Power: 74 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/219444, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 4045TF270; Transport weight [kg]: 400

x-travel:1120 mm y-travel:370 mm z-travel:410 mm total power requirement:14,5 kW weight of the machine ca.:3850 kg dimensions of the machine ca.:3,5 x 3,5 x 2,2 m Table dimensions:400 x 1600 mm spindle taper ISO:50

diameter:400 mm total power requirement:110 V, 125 W weight of the machine ca.:72 kg

grinding diameter:4000 mm centre height:310 mm weight of the machine ca.:17 t dimensions of the machine ca.:10.5 x 3.6 x 1,9 m

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/john-deere-4045hf485-used/ 774, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 4045HF485; Transport weight [kg]: 745

Engine Brand: JOHN DEERE, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 86 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/john-deere-4045hfc92-new/2 2396, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 4045HFC92; Transport weight [kg]: 500

Bread slicer Band slicer PS Mako Slicer 400 - Ribbon bread slicer - Manufacturer: PS Mako - Type: Slicer 400 - Operating voltage: 400 volts - Rated current: 8A - Year of construction: 2002

Horizontal broaching machine RAWT 25 x 4000 x 500 company Hoffmann Year of manufacture 2000 Max. Operating pressure: 70bar, filling quantity hydraulic fluid: 630l, with loading gantry and sliding guide with carriage Find more here - /

The Maho MH400 is a CNC (Computer Numerical Control) milling machine designed for precision machining of metal and other materials. 1. Machine dimensions: The Maho MH400 has a compact design with dimensions of 3.5m x 2.3m x 2.5m (length x width x height) and a weight of around 4,000 kg. 2. Work envelope: The machine has a work envelope of 400mm x 375mm x 250mm (X,Y,Z) that allows for the machining of a variety of complex parts. 3. Spindle speed: The machine has a maximum spindle speed of 4,000 RPM and can deliver up to 3.0 kW of power. 4. Control system: The Maho MH400 is equipped with a Heidenhain TNC 124 CNC control system that allows for precise control of the machining process. It has a user-friendly interface that allows for easy programming and operation. 5. Tool magazine: The machine has a tool magazine that can store up to 16 tools. It can automatically change tools during t ...

Marver MV S-400 semi-automatic cutting table for flat glass Find more here - / Contact us at -

2017 TLM Prime 400 Welding machines flow packer Product filling from above, stable steel construction[1] powder-coated; guides and components thatcome into contact with the product made ofstainless steel; color RAL 7035 light gray and RAL1021 rapeseed yellow; stable, transparent protective cover made ofpolycarbonate Safety cover overwelding system and control panel; manual filling intopre-tensioned bags on the forming shoulder; automaticoperation via photocell control; motor drivevia stepper motors (2 pieces); adjustable (standard)or fixed shaping shoulder adapted to the product; Product is pulled and welded via a roller system (take-off roller/welding roller); adjustableheadroom height; Product infeed belt/ welding system adjustable at an angle of 45° - 80°; max. product thickness100mm; Latest Mitsubishi system for optimizing the rolling movement of the axles; control panel typeMits ...

2008 HEINRICH SCHNEIDER PMS 400 Measuring machine Type: PMS 400 Year of construction: 11/2008 Magnification: 1.5x Voltage: 240V AC Frequency: 50/60 Hz Power: 1 kW Technical data: see pictures Find more here - / Contact us at -

Key data: 420 mm, 1524 mm, 3300 1/min

Stock number: 3963 CNC LATHE Manufacturer: MAZAK, Type: INTEGREX 400 III-S Machine NO.: 173882, Year of manufacture: 2005 Specifications: Max. circumferential diameter 420 mm dia. Max. turn. About Bed 850 mm Dia. Turning length 1524 mm Main motor power 30 kw Main spindle speed range 3300 rpm Drilling through drawing tube 102 mm dia. C axis - head spindle movement 0.001 degrees Y axis +/- 115 mm B Axis Movement -30/+195 degrees B axis spindle speed 12000 rpm B axis spindle effect 18.5 B axis tool system Capto C6 Sub-spindle C axis - counter pindle movement 0.001 degrees Engine power sub-spindle 26/22 Kw Total Power Consumption 99.9 kva Control Mazatrol 640 Fabr. Spindle Hours 7167 Hours Controlled in 6 Axes Accessories: ATC Tool magazine with 40 stations Hydr. Chuck main spindle 300 mm dia Hydr. Chuck Subspindle 300 mm dia  ...

Drive: . kW Capacity: . kg/h material: . 5 pieces Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: 180 mm Cutting height: Ø140 mm Motor output: 2,2 kW Cutting height at 45°: Ø120 mm Dimensions (L/W/H): 700x950x1750 mm machine weight ab.: 180 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dematic incline belt conveyor 10300-500-400 RA2347 Conveyor length (FL): 10300 mm (800 mm forward run, 8400 incline segment and 1100 mm arch) Outer width/nominal width (NB): 500 mm Outer width/nominal width with motor: 750 mm Belt width (GB): 400 mm Profile height: 135 mm Climbing belt with curved section Infeed conveyor with overdrive Arched section with 2 adjustable bends Rubberized drive drum Drive: SEW 400 V 0.55 kW Optionally available supports side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: very good (used) Conveying length in mm: 10300 (800 + 8400 + 1100) Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Berat ...

Dematic conveyor system Accumulating roller 40000-500-440 RA2344 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 40000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Stowage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.3 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side  ...

Key data: 850 KW

2 X MTU 8V 4000 L63 Trigeneration Plants Hours: 34,000 Year: 2013 Fuel: NAT GAS Control Panel: MTU Capacity: 2 X 850kW Voltage: 400 HZ: 50 Service History: At 21,000 hours, major maintenance was performed relating to: pistons, liners, turbo overhaul, and intercooler replacement. At 42,000 hours, another maintenance is scheduled identical to the 21,000-hour one + connecting rod replacement. At 31,500 hours, the generator was overhauled with bearing replacement. The "exchange" overhaul is scheduled at 63,000 hours. STOPPED IN MARCH 2024 Scope of supply: Complete Trigeneration Plant. The trigeneration plant consists of two endothermic engines fueled by methane gas, each having the following main characteristics: • Chemical power input 2,130 kW • Electrical power 849 kW • Engine jacket heat recovery 511 kW at 78/90°C • Diathermic oil boiler from exhaust ...

Granit marble ATELIERS MAITRE Length: 2000 mm Width: 1200 mm Thickness: 400 mm Height on feet: 910 mm Class 2 Weight: approx 2 T

Philips Practix 400 mobile X-ray machine with Varian RAD 68 0.6/1.2 tube • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • The offer is subject to prior sale.

Product number: 3089J Type: Platino 400 Serial number: E013928 Year of construction: 2012 Belt width: 400 mm Height setting: 2 - 51 mm Compressed air: 6-10 Bar, 0.7 l/min. Power: 3 x 400V, 50Hz, 3kW Dimensions: 2250 x 1100 x 1550 mm Weight: 600 kg

Robofil 4030SI-TW Wire EDM Machine Year of manufacture 2001 Technical details on request

Thermal press machine HIX Basic B 400 in production ready condition.

heavy gear, for interrupted cutting Cutting height 125 mm Cutting length 400 mm Mitre right + left by 60°

Key data: 400 , 800 , 1000

Center distance 6000 mm Height of centers 400 mm Max diameter on the bench 800 mm Max diameter on the carriage 520 mm Max diameter in the recess 1100 mm Bar passage 130 mm Undercarriage stroke notes 340 mm TURRET Standard BENCH Max weight between tips 3500 Kg Max weight on steady rests 4500 Kg Pallet width 520 mm TAILSTOCK Steerer diameter 115 mm Steerer stroke 380 mm Cone cm6 HEAD Spindle power 25 Kw Spindle speed 5/1000 Rpm 11" cam-lock spindle attachment Spindle torque 560 Nm GiVi axis display measurements Self-centering 500 Use and maintenance books Yes Wiring Diagrams Yes Protections yes Ready for availability Visible in the warehouse in operation

Manufacturer: ATM Type of Machine: Scrap Baler 40x40 Year of Manufacture: 2013 Find more here - / Contact us at -

For sale Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line . year: 2014

Manufacturer: HAVER NIAGARA Model: T-Class U 400x800 1D Year of Manufacture: 2023 Type of Machine: Screening Machine/ Vibrating Screen Find more here - / Contact us at -

Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Work belt width 400 mm Strap type made of acid-resistant steel

X-Hub 4000mm Y-Hub 900mm Z-Hub 950mm Weight: 18.500kg Headstock Range: 100 – 12,000 rpm Spindle design: SK40 Tool Stations: 66pcs. Control Type: iTNC530 Release date

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm control: MSX 501 Mori Seiki work table:: table surface area: 700 x 450 mm max. table load: 350 kg number of T-slots: 4 T-slot - width: 18 mm T-slot - distance: 100 mm Main spindle: Number of revolutions: 12.000 U/min power capacity - main spindel: 18,5 / 15 / 11 kW tool taper: BT 40 max. Torque: 110,5 Nm diameter of forward milling spindle bearing: 70 feeds: rapid travel x/y/z: 20.000 mm/min feed speeds: 1 - 20.000 mm/min Tipp feed: 15 Steps / 0 - 1.260 mm/min Tool-Presetter:: Number of Toolpositions in magazine: 40 Pos. Max. mould width: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 250 mm max. tool weight: 8 kg change-time chip to chip: 2,8 sec change-time tool to tool: 1,0 sec total power requirement: 34 kVA weight of the machine ca.: 7,2 t dimensions of the machine ca.: 2,8 x 3,0 x 2,9 m Documents: Chip conveyo ...

All spare parts are sold individually or as a complete set. Those who purchase everything will receive an attractive discount.

turning diameter: max. 420 mm turning length: 1250 mm control: INDEX, C 200-4 D swing diameter: 630 mm travel x1: 320 mm travel z1: 1250 mm travel x2: 170 mm travel z2: 1250 mm travel x3: 320 mm travel z3: 1250 mm main spindle speed: max. 3000 U/min main spindle drive: 53 kW spindle passage: 102 mm spindle head: DIN 55026 Gr. 11 max. torque on the spindle: 675 Nm sub spindle - spindle speed range: max. 3000 U/min sub spindle drive: 53 kW sub spindle - spindle passage: 102 sub spindle - spindle head: DIN 55026 Gr. 11 sub spindle - spindle torque: 675 Nm travel sub spindle: 1250 mm feed power: X1 14000/Z1 14000 N rapid traverse: X1 20/Z1 40 m/min feed power: X2 8600/Z2 14000 N rapid traverse: X2 20/Z2 40 m/min feed power: X3 14000/Z3 14000 N rapid traverse: X3 20/Z3 40 m/min numbers of turret head positions: Rev. 1 = 12 numbers of turret head positions: Rev. 2 = 10 numbers of turret head p ...

turning diameter: 120 mm turning length: 380 mm control: Fanuc 18 iTB max. swing diameter: 300 mm : : 8000 min/-1 : 7,5 kW : 26 Nm spindle nose: 100 mm spindle passage: 32 mm A-Axis: : 8000 min/-1 : 5,5 kW : 23 Nm spindle nose: 100 mm spindle passage: 32 mm : : 12 pos. tool taper: VDI 16 Sub Spindle: x-axis: 400 mm z-axis: 400 mm feeds:: rapid traverse: 12 m/min total power requirement: 20 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 2 x 1,7 m 2022 New glass scale Heidenhain and replacement of smaller parts, new FANUC CNC Keyboard CNC - Ultra precision turning centre (X-, Z-, E-, C-Axe) - CNC control Fanuc 18iTB - Main and counter spindle - SAUTER tool turret 16-fold (0.5.480.510) VDI 16 - Linear tool slide - automatic doors - Chip tray - Coolant system with fine filter (high Pressure Pump) - 3 jaw chucks - Various clamping devices/pressure collets - Vari ...

pressure: 400 t throat: 1140 mm stroke: 600 mm table surface area: 2000x1000 mm Plate: 4000x1000x300 mm ram head dimension: 2000x1040 mm Cylinder: 300 mm Daylight: 650 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,9x4x4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3500 mm turning diameter: 4000 mm centre distance: 16000 mm turning speeds: 0,71-33,5 U/min Rest: 2 tailstock quill taper MT: max. workpiece weight -without tailstock: 6300 kg max. workpiece weight between centres: 18000 kg Plate area: mm total power requirement: 31 kW weight of the machine ca.: 60 t dimensions of the machine ca.: 22x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: 275 mm max. module: 6 Overall size: 300x330x245 cm weight of the machine ca.: 5,5 t dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min Specification: Max wheel diameter: 400 mm Min module: 1 Max module: 6 Table diameter: 370 mm Max wheel diameter: -With counterstay: 340 mm -Without counterstay: 400 mm Max axial offset: 275 mm Max tangential adjustment: 100 mm Tooth helical angle: 45 degrees Max cutter diameter: 145 mm Max hobbing length: 170 mm Hob turning speeds capacity: 63-180 U/min Feeds infinitely variable axial: 0,2-10 mm/U Feeds infinitely variable tangential: 0,1-5 mm/U Radial for spur gears: 0,1-4 mm/U Radial for worm gears: 0,025-1 mm/U Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/U Radial for worm gears: 100 mm/U Motor power: 7.4 kW The data for t ...