40 bar used for sale

Available in stock 1 x Used Fuel Injector Nozzle Tester (400 bar). The equipment is used but in good working conditions.

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank, compressed air storage -Compressed air tanks: compressed air storage -Type: CMBB container Ø 200 x 400 mm -Contents: approx. 12 L -Operating pressure: 11 bar -Technical data: see photo type plate -Dimensions: 500/270/H235 mm -Weight: 6.5 kg

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 5.750 Litre Measurement and Weight: Total Height: 4400 mm Tank Body Height: 3325 mm Diameter: 1600 mm Weight: 2110 kg Uni 3750 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure cooling jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Jacket and walls 9 mm. On cylindrical part of a cooling jacket as double jacket about 2.500 mm high. Container outside approx. 100 mm isolated, with screw stainless steel metal cover. Tank upp ...

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Orsta, universal unit -Motor: 1.1 kW/1410 rpm -Nominal pressure: 63 bar -Liter output: 6.3 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 380/750/H640 mm -Weight: 72 kg

Hydraulic pump, high-pressure pump -Max. pressure: 500 bar -Hydraulic connections: 7 -Pressure gauge up to: 600 bar -Pressure: can be switched on/off via foot switch -Pressure: mechanically adjustable -Motor power: 0.15 kW at 1370 rpm

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, pressure gauge with glycerin filling, unused, original packaging -Type: RKG 63-3,r 0-100 bar G1/4 A -Quantity: 1x pressure gauge available -Cardboard dimensions: 95/95/H75 mm -Weight: 0.3 kg

Qty. 1 Second-hand Shot-Blasting Line Mfc.: COGEIM – SAS Eng. Built: 2016 Dismantled and in storage Type: 4 Turbines Material to be processed: Bars’ length: min. 6.000 – Max. 12.000 mm Approximate work pieces dimensions and weight: Dimensions: round Ø 30 - 110 mm No. of simultaneously processed bars 7 up to Ø= 60 mm; 4 for bigger diameters

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer -Manufacturer: Timmer, Bourdon tube manometer -Type: M-SH-40-0/10-1/8-KU-bar/psi -Item No.: 18245004 -Screw connection: see photos -Number: 20x pressure gauges available Price: per piece / from 2 pieces €7,-/piece -Cardboard dimensions: 45/45/H45 mm -Weight: 0.1 kg/piece

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Wika, Bourdon tube pressure gauge, unused, original packaging -Type: 111.10.100 25 bar G1/2A -Item No.: 9021850 -Number: 14x pressure gauges available -Price: per piece -Cardboard dimensions: 145/105/H45 mm -Weight: 0.2 kg

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Wika, Bourdon tube pressure gauge, unused, original packaging -Type: 111.10.100 25 bar -Item No.: 9012605 -Screw connection: see photos -Number: 4x pressure gauges available -Price: per piece -Cardboard dimensions: 145/105/H35 mm -Weight: 0.2 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, pressure gauge with glycerin filling, unused, original packaging -Type: RKG 63-1,r 0-16 bar G1/4 A -Number: 7x pressure gauges available -Price: per piece -Cardboard dimensions: 95/95/H75 mm -Weight: 0.3 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, Bourdon tube pressure gauge with glycerin filling, unused, original packaging -Type: RChG 63-3, Rh 0-4 bar G1/4 A -Number: 4x pressure gauges available -Price: per piece -Cardboard dimensions: 95/95/H75 mm -Weight: 0.3 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, Bourdon tube pressure gauge, unused, original packaging -Type: R 100-1 rFr 0-2.5 bar G1/2 A -Number: 2x pressure gauges available -Price: per piece -Cardboard dimensions: 140/135/H110 mm -Weight: 0.6 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, Bourdon tube pressure gauge, unused, original packaging -Type: RCh 100-3 rFr 0-1.6 bar G1/2 A -Number: 5x pressure gauges available -Price: per piece -Cardboard dimensions: 140/140/H105 mm -Weight: 0.8 kg/pc.

Rotary Lathe with Staylog Bar and Longitudinal Cutting System

Sparkling Pressure Tank / Steel Pressure Tank Storage Tank / Pressure Tank with red food safe munkadur coating, HORIZONTAL with new KIESELMANN Sparkling pressure fitting Operating pressure 8 bar Volume: 5.000 Litres Measurement and Weight: Total Length: 2800 mm Cyl. Length: 2045 mm Diameter: 1600 mm Weight: approx. 1220 kg Operating pressure: 8 bar, Test pressure: 10,4 bar Operating temperature: -10+50°C Tank lining: EMS 277 Inspection book, Documentation available Tank-Description Container with torispherical bottoms. Bottoms 8 mm wall thickness, jacket wall thickness 8 mm. Top of the tank: • with 1 flange DN 25 Tank body: • with forward drawn manhole oval front 440 x 350 mm swiveling with holder • with new KIESELMANN Sparkling pressure fitting with manome ...

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank with red food safe munkadur coating with cooling jacket and with isolation With new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 8.000 Litre Measurement and Weight: Total Height: 4900 mm Tank Body Height: 3625 mm Diameter: 1900 mm Weight: 2100 kg Uni 4850 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Operating temperature: -10 +40 °C Year of construction: 2000 Lining: Akorrosit EL 15 p” On cylindrical part two cooling jacket, test pressure 2 bar, depressurizes, 5,8 m2 cooling surface Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms and jacket 8 mm wall thickness. Container outside completely isolated with ...

Sparkling Pressure Tank / Champagne cooling tank / Storage Tank/ Pressure Tank Overpressure 8 bar, STANDING With new KIESELMANN sparkling pressure fitting Volume: 10.000 Litres Measurement and Weight: Total Height: 3220 mm Cyl.Height. 2050 mm Diameter: 2200 mm Weight: approx. 2250 kg Uni 3950 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Operating temperature : 20°C Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms 12 mm wall thickness and jacket 10 mm wall thickness. Tank upper body: · filling connection DN 50 central in the top · 2 crane eyelets · Flange connection NW 40 · 1 Block flange NW 20 Tank front: · with manhole oval 450 x 350 mm swivelling with holder · with new KIESELMANN sparkling pressure fitting up to 10 bar with manometer, with overpressure s ...

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 11.500 Litre Measurement and Weight: Total Height: 4450 mm Tank Body Height: 4000 mm Diameter: 2250 mm Weight: 3400 kg Uni 4950 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure double jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness and jacket wall thickness inside container 11 mm. On cylindrical part of a cooling jacket about 2,30 m high as double jacket. Container outside approx. 100 mm isolated, with scre ...

Korimat KA 160 autoclave, 240 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine at our facility in 56070 Koblenz, Germany.

Korimat KA 160 autoclave, 120 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine at our facility in 56070 Koblenz, Germany.

We sell a lower foldable tail lift the product group Bär Cargolift folding. Type BC 1000F2-A1A/2408-A0 Operating pressure 220 bar Year of construction 2009 The tail lift is in good condition, is available and can be viewed like in Meersburg, Baden-Württemberg.

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Cold water high-pressure cleaner Welcome to the innovative and compact me-Class! The DYNAJET 280me with up to 280 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service life with maximum running times ...

Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

Cold water high-pressure cleaner with 2.2 kW power 150 bar pressure and 8 l/min. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - Hose reel with 15 m hose The imag ...

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

Hot water generator KENT Duo HotBox 500 bar Description: - Working pressure: up to 500 bar - Flow rate: 2 x 11-56 L/min. - Burner: oil / approx. 90 KW - Tank: approx. 20 L - incl. Automatic Start/Stop Flow - incl. flame control - incl. operating hours counter - Chassis: Black lettered - Hood stainless steel Features: - Powder-coated frame with stainless steel cover - 4 wheel chassis with solid rubber tires - fan motor, - Oil pump - KENT burner boiler with approx. 90 KW heating capacity - Automatic switch-off start-stop flow controlled - incl. E-connection cable - Water inlet temperature max. 60°C Scope of delivery: - Inlet hose Dimensions: (L x W x H in mm) 1000 x 680 x 760 Weight: approx. 190 Kg Shipping possible. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

25x 250 ltr. VA2 transport tanks / transport containers, slightly pressure-resistant, manufacturer: Umformtechnik Hausach, used, round standing, stackable (only empty recommended), dom above NW 125 with safety valve system Stöklin + 2x CO2 valve large NW 40 + small NW 25 system Stöklin, residual outlet with disc valve NW 50, operating pressure 0.9 bar, test overpressure 2 bar, pressure resistant for e.B. overlay with CO2 or CO2 impregnate, ideal also for refilling barriques, Weight/h.: 57 kg, cleaned inside, very stable design, can be driven under with pallet truck or e-ant Diameter: 0.62 m, H: 1.50 m, Price/hour: 550,- € plus VAT ex warehouse Dolgesheim

Storage Tank 920 Litres with cooling jacket in AISI 304 NEW, incl. TÜV Certificate Standard Features: Total Height: 2460 mm Body Height: 1900 mm Diameter: 850 mm weight: approx. 240 kg max.working pressure product space: 6 bar Material of tank: 1.4301 max.working pressure cooling jacket: 1 bar max.working temperature to °C: 130 Surface inside: III C

We are here to provide an L type automatic sealing machine, which is widely used in a variety of industries due to various reasons. Our machine is available in a variety of specifications. A loading and cooling zone is supplied as standard output. A heat-resistant, powder-coated carrier was used. It is very easy to install and easy to use. Conveyor roller made of stainless steel and silicone coated. Power-coated tunnel covers for heavy duty and an electrical control panel are included. Capacity: 50 pieces/min Voltage 380V/50-60Hz/3-phase Main Material: Stainless Steel The internal circuit type is suitable for PVC. PP. POF packaging material. Extra-long shrink tunnel, intelligent temperature controller with figure and closing heat wind inner circuits.

Mixer Bär AR 40 MK1 40 l bowl– 1 pcs; beater 1 - pcs bowl ang spiral stainless steel; power: 1,1 kW

SCHENCK hydraulic power unit type PP250A B Used hydraulic power unit. Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 250 l/min Tank capacity 1.3 m³ Year of manufacture 1996 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent ...

We offer Adsorption dryer 2 Kaeser DC 75 E Bj. 2016 6-16 bar Bid 1-3 The system is part of a compressed air system in a production hall. It is used built in 2016, and fully functional, in very good condition and is offered - due to restructuring of the use of the hall at our customer. The display will continue to be updated specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption Dryer DC 75 with 2 desiccant containers Bj:2015 - Volume: 133 l - Filling weight: 100 kg - Adsorption center: Activated aluminum oxide Al2O2g - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1038 - Operating hours: 5700 estimated based on compressor hours - Max operating temperature air: 0° C - Ambient temperature 2-45°C - DL entry temperature min/max +2 / +50 °C - Volume flow at 20°C compressed air ...

Debarking machine Bar Gar Bg 90 min 140/ max 900mm motor 22 kw with cententic table block pull with ejection

Entrideting machine Bar Gar BG90 min 140/ max 900mm moror 22kw with cententic table block pull with ejection after renovation with warranty

Entrideting machine Bar Gar Bg9a min130mm/ max 900mm motor 30 kw Rotor on ball or raderlager, rotor with 5 or 6 Formwork knives, switchboard mi control panel

1 gebr. Boiler ------------------------------------ - mounted on frames - - With integrated Eco - Manufacturer : LOOS, Gunzenhausen Type : UL-S 4000 Heating surface approx. : 80 m² Capacity : 3.170 kg/h Bish. Ab. Operating overpressure : 10 bar Increased test overpressure : 19 bar Water content at NW approx. : 5.930 l Water content full approx. : 8.020 l Year of construction : 07 / 2010 CE mark : CE 0036 equipped with Elco oil burner, separate control cabinet, feed water pump, and the existing coarse and fine fittings. Integrated Economizer Type Eco1: Ab. Pressure max. : 31 bar Test pressure : 56 bar Ab. Temperature max. : 238°C Heat output : 92 kW Total volume : 40 ltr

High-pressure pumps are used to clean plants and apparatus, allowing containers, filter cloths from filter presses and pipelines to be cleaned. Name: High Pressure Pump Used Manufacturer: Uraca Type: KD613 Year of construction: 1991 Material: Normal steel Drive motor: 54 kW Dimensions: L 1800 x W 1000 x H 750 mm Empty weight: approx. 2000 kg Speed: 468 rpm Flow rate: 270 liters / min. Condition: Used Tech. Documentation: Yes Price: On request

New hotbox in the industry standard for max. 200 bar and up to 28 liters per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

Hydraulic pump, 0513300201, 140 bar, Bosch, mint condition Please note: This is an original Bosch product and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new! The part comes from the spare parts warehouse of a certified manufacturing company, has been in storage for a long time, has never been used and is in mint condition. Drive shaft d20mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and co ...

Engine Brand: PERKINS, Condition: USED, Working Hours: 7700 Hour(s), Engine Condition: Used , Starter Voltage: 12 Volt , , https://www.hamofa.com/stock/compressors/ingersoll-rand-p70wn-compress or-7-bar-used/42278, , = More information =, , Type number: P70WN COMPRESSOR 7 BAR

Available in stock 1 x Used 1000 bar Two Stage Hydraulic Hand Pump with hose. The equipment is used but in good working conditions.

Solenoid valve, directional control valve, valve manifold, control valve -Manufacturer: bar, solenoid valve type NM-321-H -Solenoid coil: MA 22 -Price: per piece -Quantity: 2 pieces -Dimensions: 135/72/H22 mm -Weight: 0.3 kg/piece

Test pump, pressure test device, measuring device, pressure test pump -Manufacturer: Junginger, mobile extraction device -Pressure display: 40 bar -Dimensions: 790/480/H775 mm -Weight: 47 kg

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Wika, pressure gauge type 233.50.063 16 bar -Art.-No.: 12064394 -Screw connection: G1/4B -Dimension box: 90/100/H70 mm -Weight: 0.3 kg