129,003 used machines on RESALE, but how to find them? Machine Search
Packaging machine Paper machine, Upmatic 4000 PA for pack sizes from 1.5 kg to 10 kg Dimensions of the paper bags 600 x 300 x 180 mm to 600 x 300 x 180 mm Capacity for quantities of 5 kg: approx. 20 bags/min. 230 V / 400 V at 50 Hz Power consumption approx. 3 kW Air pressure 3 bar Air consumption approx. 390 l/min. Weight 700 kg Dimensions 2785 x 1890 x 2200 mm Controls Moeller PS4-341 Control panel MV4-150-TA1 Magazine capacity: 300 paper bags Documentation available Upmatic Computer Scale 2007 Computerized Partial Batch Weighing Machine Weighing range 1.0 to 25 kg Power capacity for quantities of 2.5 kg approx. 30 cycles/min. 230 V / 400 V at 50 Hz. 3 phases + neutral conductor Power consumption approx. 4 kW Air pressure 6 bar Air consumption approx. 2.6 litres/cycle Weight approx. 1100 kg Dimensions 2425 x 1777 x 2053 mm Control, control panel Moeller MI D ...
Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/400 Year 1983 - Serial-No. V 6.83.1891 Mobile on mobile frame After sealing - automatic transport into tunnel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Computer, on-board computer, organizer -Type: Organizer 2 Compilot 400 -Number: 2 organizers available Price: per piece -Weight: 0.8 kg
Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 Universal Year 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Technical data: Manufacturer: Gildemeister Type: NEF 400 Year of Make: 2007 Control: Siemens 840D ShopTurn Travel X/Z: X 220 mm, Z 700 mm Operating hours: 31,812 h Working spindle Spindle bore: 65 mm Speed: 4,000 rpm Power: 15/12 kW Torque: 400/320 Nm Rapid traverse X/Z: 15 m/min Circumferential diameter over bed: 400 mm Turning length: 650 mm Tool turret Direct recording: 8x Shaft cross-section: 20 x 20 mm Shaft diameter for drill rods: 25 mm Tailstock Tailstock: MK4 Quill stroke: 40 mm Dimensions and weight Dimensions: 2,100 mm x 1,750 mm x 1,710 mm Weight: 2,800 kg Condition Condition: Used Functional: Tested and fully functional
Prägepresse / Hot Foil Stamping Press Gierlich P 4000 Serial-No. 8296 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Universa 400 Standard Bj 2004 Compact 450 SO Bj 2005 MGZ 400 Hand Feeder Bj 2004 Immediately available from stock
Vollautomatische Einschweißmaschiene mit Einschweißtunnel - Automatic Foil sealing machine Kallfass Universa 400 NT - Universal 450 N Year 2000 - Serial-No. S 04.00.9 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Key data: 320 KW, 400 kVA
Currently we offer a: FG Wilson generator set Type: S400 Engine Scania DSC 12 Generator S-Star Power: 400 KVA / 320 KW Hz 50 150 RPM AVR Control: MX321 Year of manufacture 2001 Hours 1001 You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Centrifugal pump, water pump -Max. Delivery rate: 432 l/h -max.: 40 m -Motor power: 200 watts -Dimensions: 375/95/H95 mm -Weight: 4.1 kg
Key data: 320 KW, 400 kVA
We currently offer: Number 31 Tessari generator set Engine Iveco Alternator Iveco Power: 400 KVA / 320 KW Hz 50 RPM 1500 IP 22 AVR Control SX440 Hours: 7837 Year of construction 2002 Metrics: L: 5.30m B: 1.75m H: 2.60m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Thyristor -Type: KT 201/400 -Price: complete -Number: 99 pieces -Weight: 0.3 kg
Thyristor -Type: T 15-406 Price: complete Quantity: 14 pieces -Weight: 0.5 kg
We currently offer: Number 34 Iveco generator set Generator mecc old Type: ECO40 Power: 400 KVA RPM 1500 Hz 50 IP 23 Year of manufacture 2018 Hours: 10503 Metrics: L: 3.30m B: 1.65m H: 2.15m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Number: 65x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 3.7 kg
Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 18 mm -Drain: Ø 60 mm -Number: 26 available -Price: per piece -Dimensions: 540/440/H300 mm -Weight: 4.3 kg
roll diameter: 400 mm roll length: 1000 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 45 kW Condition: used, overhauled Specification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rollers - roller diameter: 400 mm - roll length: 1000 mm - Rolls: with core bore, with central chamber for water cooling - Fixed friction between the rollers - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with new Johnson-Fluiten slewing rings, for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit: NEW - Manually tiltable steel guide plates with mechanical safety lock with mechanical safety interlock - Stainless steel roller container for holding the mixture - bi-directional safety belly bars - Safety brake for NOT stop - ...
saw blade diameter: 400 mm capacity 90 degrees: round: 135 mm capacity 90 degrees: square: 130 mm : 200 x 80 mm saw blade turning speeds: U/min total power requirement: kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,0 x 1,8 x 1,95 m Automatic circular saw with - Feed type RB 1500 - Roller conveyor 1500mm Good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Workspace Workpiece, weight (max.) 500 kg Table dimensions 813 mm x 406 mm Distance spindle nose - table surface 580 mm Dimensions magnetic clamping plate 800 mm x 400 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel Travel X-axis 910 mm Y-axis travel 450 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 3.6 m x 2.4 m x 1.9 m Weight 3400 kg
approx. 500 pieces, storage box / tray, SSI Schaefer, type MF 4060 (40 x 30 x 6cm) - used - : Price per unit ex location (net): 2,50 € We reserve the right to purchase a minimum quantity! Manufacturer: SSI Schaefer Type: MF 4060 PP Year of manufacture: unknown External dimensions L x W x H 396 x 297 x 60 mm Internal dimensions L x W x H 366 x 267 x 42 mm Usable height in stack 27 mm Capacity 4.1 litres Content load (max.) 20 kg Color: Blue Condition: good, Available: immediately Location: CZ, Bor, later camp Frankenberg / Saxony
Key data: 2400 KG
Technical data of the pallet rack crossbar: Shelving system: Galler Type: Omega The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: grey IPG profile: 145 x 65 mm Agraffe: 5 HK (hooks) Clear width: 4,295 mm Max. load per pair of trusses 2,400 kg, with the same weight. Distributed load 02x Locking pin, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery can be queried from us
Used Alfa Laval Clara 20 HF - LAPX404 SGP centrifuge. New: 2014 Condition: very good Complete technical documentation Worked in food standard (vegetable proteins) Worked 328 h
Key data: 1200 KW
Output power 1286 kw Voltage 400 V Frequency 50 Hz Generator Stamford , Base rating 1416 kw
faceplate diameter: 400 / 450 mm bore: 100 / 120 mm faceplate - height: 120/165 mm short taper: Din 55022 7 Gr. 11 Four-jaw face plate. Short taper - design, according to DIN 55022/27, size 11, with 6 studs, reversible top jaws, Baking individually via threaded spindles only individually adjustable. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 803; Engine: Perkins 404D-22TG; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : 32A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
Key data: 45 °, 3200 mm, 1500 mm
Connected load 380V Main motor 7.5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram protection device with wide and narrow hood Scoring unit manual adjustment Electric height adjustment Electric swivel with Siko indicator Extraction connection 1x100mm 1x120mm
Transnorm Belt conveyor 3200-500-400 RA2335 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1995 Condition: good (used) Motor: fully functional conveyor length (FL): 3200 mm nominal / external width (NB): 500 mm belt width (GB): 400 mm overall height (BH): 65 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 0.175 m/s, Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1995 condition: good (used) Conveying length in mm: 3200 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,10 Conveyor speed m / s: 0,175 scope of delivery: without supports and side ...
; Gross weight [kg]: 9613; Engine: Cummins KTA50-G3; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger
Key data: 3600 mm, 4200 mm, 4800 mm
Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,600 mm Circumferential diameter (max.) 4,200 mm Workpiece height (max.) 4,800 mm Total height of the machine 8,700 mm Maximum workpiece weight 80,000 kg. Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam in 100 mm increments 2,800 mm Crossbeam Support (Right) Horizontal adjustment support - 1,800 to + 2,200 mm Vertical displacement of the chisel slide valve 1,500 mm Cross-section of the chisel slide 240x240 mm Tool stations 20 pcs. Side Support (Right) Vertical adjustment support 2,800 mm Horizontal displacement of the chisel slide valve 1,000 mm Cross-section of the chisel slide 240x240 mm Turning diameter max./min. 4500/2500 mm Tool Changer Main Drive: Main motor power 105 kW Face plate speed ...
clamping force: 4.000 kN injection volume: 4.000 cm³ screw diameter: -- mm platen size: 800 x 710 mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - heating platen size: 800 x 710 mm - ejection device: 2-layer Injection unit: - Injection volume max.: 4,000 cm³ - Original screw 1005.10.008 B/c The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 4.000 kN injection volume: 2.700 cm³ screw diameter: -- mm platen size: -- mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - ejection device: 2-layer - Brush system: 2-layer Injection unit: - Injection volume max.: 2,700 cm³ Two identical systems are available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 29000 ( 25000 + 4000 ) Nominal / outside widt ...
Mitutoyo U-Clamp Gauge as good as new unused Mod. 105-408 Gauge 1000-1100 mm in the original List price 3450 €
Digital Screw Gauge from Mitutoyo 400-425 mm Overgrip new in the original wooden box with test certificate
bookpress Make Hercules Model 4030 Year 1950's Size 300 x 400 mm Available Direct
Packaging machine Kallfass Universa 400 ECO; cleaned and tested; Welding width 450mm; Passage height 200mm; Max. Film width 600mm; Min. Product length 80mm; Foil perforating unit; Stepless speed control of the belts; permanently heated welding punch; Counter 418,000. Packaging machine Kallfass Universa 400 ECO; cleaned and checked; sealing width 450mm; hight 200mm; max.foil width 600mm; min.product lenght 80mm; foil perforating tool; dajustable in speed of the trnasport belts; permanently heated seal bar; counter 418,000.
Inv. Num. : 8115 Type: PEKR 400 Producer: Richter Created: 1961 Parameters: Compressive force: 400 t Stroke length: 10-220 mm Maximum stroke rate per minute: 30 1/min Adjusting the ram: 160 mm Motor power: 30 kW Max. sheet thickness: 26 mm One hole in the table: 400/255 mm Machine height: 3750 mm Machine length: 2400 mm Machine width: 3250 mm Machine weight: 42000 kg
grinding length: 4000 mm grinding width: 1100 mm workpiece height: 1100 mm total power requirement: kW weight of the machine ca.: 21 t dimensions of the machine ca.: m Modernisierte Präzisions-Flach-und Führungsbahnschleifmaschine aus Überholungsbetrieb. Geschliffen wurden unter anderem Betten für neue KERN Drehmaschinen. -Digitalanzeigen nachgerüstet -Umbau auf Kugelrollspindeln in der Querachse -Schleifspindel für Umfangsschliff -schwenkbare Schleifspindel für Untergriffe -Originalschabbild in der Längsachse -Elektrik erneuert -Aufspannfläche 4300 x 1500 mm Bei Nutzung einer Grube können wesentlich höhere Werkstücke geschliffen werden! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pelletizing Mixing Conditioner Pellet Mill Amandus Kahl Diameter 400 mm, length 2500 mm, stainless steel, as good as new
Machine type: MIG/MAG welding machine Make ESAB Type LAN 400 Connection voltage 3 x 400 volts Adjustment range 45 – 400 amps Duty cycle 60% ED at 400 amps 80% ED at 355 amps 100% ED at 315 amps Current setting 40 switching levels 3 chokes for the ground cable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feeder 4-roller drive Fuse 20 Ampere Dimensions L x W x H 900 x 700 x 990 mm Weight 192 kg Age approx. 15 years Condition workshop tested, good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 Piece Instruction Manual Warranty: 6 months from the date of delivery List factory price from stock €6,900.00 + VAT Pr ...
Maximum force ton-force 400 Slider stroke length mm 400 Slider strokes per minute 25 Maximum distance between table and slider (in lower position of slider) mm 470 Size of adjustment of distance between down-stamp a plate and slider mm 160 Table overall dimensions: mm ·from front to rear 1000 ·from left to right 1000 Slider overall dimensions: mm ·from front to rear 800 Main electric motor power kW 40 Press overall dimensions mm ·length 3470 ·width 3140 ·height 5940 Press weight kg 32600
Finger conveyor belt Kallfass MGZ 400; cleaned and tested; Length 2000mm; Width 400mm; suitable as a single belt or for connection to Kallfass machines; Inlet sensor. Nipper feeder Kallfass MGZ 400; cleaned and checked; lenght 2000mm; width 400mm; used for stand alone or to connect with Kallfass machines; Infeed Sensor.
x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm Control: Heidenhain type: TNC 355 table surface area: 800x500 mm universal head: : spindle taper ISO: 40 total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding machine Löwer type HBS 400 Technical data: - Grinding width max. (mm): 390 - Grinding height max. (mm): 390 - Sanding shoe from above: 1 - Grinding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Transport carpet: for material feed - Feed speeds (m/min.): 6/11/16 - Connection for suction diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic abrasive belt clamping - Special HBS sanding shoe: for conforming grinding with thickness differences of up to 4 mm or crooked workpieces - Selector switch adaptation grinding / calibration - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness scanning - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant
Used boiling kettle BASTRA, 400 L - Heating type: Electricity - With separate MC 30 control - Boiler capacity: 400 litres The unit has been serviced annually and is in good condition. More pictures and information on request. Visits and test runs are possible by arrangement.
turning diameter: 500 mm turning length: 1100 mm control: Pfillips 432 turning diameter over slide rest: 420 mm spindle turning speed range: 3000 U/min spindle passage: 82 mm Tool changer: 12 tool taper: VDI 40 total power requirement: kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications Maximum pressure: 45 tons Year of Make: 2017 Pressing force: 6.9 kg/cm² Number of bindings: 3 Channel cross-section: 900 × 720 × 600 - 1200 mm Dimensions of the tailgate: 820 × 1250 mm Bale weight: 250 - 400 kg Weight: approx. 7 t Power connection: 400 V Bale tying: automatic Theoretical throughput 174 m3/hour Theoretical throughput to density 20 kg/m - 3.48 tons/hour Theoretical flow rate to density 50 kg/m - 8.7 tons/hour If you have any questions, please call us: +48 696 072 985
table length: 8000 mm table width: 2500 mm burner heads: 1 control: Selectron CNC 96 output: 4 kw total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length in total: 3200 mm band width: 270 mm conveying height: 0: 2500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
