4 up thermal used for sale

grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm Working height: 92 mm all threads on clamping surfaces M12 x 1.75 holes (top): Ø 20 / 50 mm holes (bottom): 1x Ø 32 mm, 2x Ø 25 mm, 3x Ø 18 mm bore with driver: Ø 130 / 200 mm holes (holder): 2x Ø 36 mm used, tested ! Dimensions: 490 x 400 x 95 mm

Grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm Working height: 92 mm all threads on clamping surfaces M12 x 1.75 holes ( top ): Ø 20 / 50 mm fixing bolt ( top ): Ø 50 x 10 mm holes ( bottom ): 1x Ø 32 mm, 2x Ø 25 mm thread (bottom): 4x M16 x 2.0 bore with driver: Ø 130 / 200 mm holes (holder): 2x Ø 36 mm spare part for machining center HECKERT CWK400 D ! used, tested ! Dimensions: 490 x 400 x 105 mm

Pneumatic cylinder, standard cylinder, double-acting FESTO DNC-63-450-PPV-A 163400 stroke: 450 mm piston diameter: Ø 63 mm rod diameter: Ø 20 mm rod thread: M16 x 1.3 5, Length: 30 mm pmax: 12 bar used, tested ! Dimensions: 645 x 74 x 74 mm

Pneumatic cylinders, round cylinders, double-acting NORGREN RA/8063/M/400 stroke: 400 mm piston diameter: Ø 63 mm rod diameter: Ø 20 mm rod thread: M16 x 1.20 5, Length: 30mm pmax: 1.0 -16.0 bar New ! Dimensions: 600 x 76 x 76 mm

Pneumatic cylinder, round cylinder, double-acting CKD CMK2-C-40-450 stroke: 450 mm piston diameter: Ø 40 mm rod diameter: Ø 14 mm rod thread: M12 x 1,1,25, length: 20 mm pmax: 0.1 - 1.0 MPa ( 1 - 10 bar ) 2x mounting kit M1-LB-30 mounting thread: M26 x 1.5, length: 15 mm New ! Dimensions: 590 x 43 x 46 mm

Pneumatic cylinder NORGREN RA/8160/M/400/H stroke: 400 mm Rod diameter: Ø 40 mm pmax: 16 bar Pivot: Ø 40 mm New Dimensions: 750 x 280 x 180 mm

Pneumatic cylinders, standard cylinders FESTO DNG-40-400-PPV-A 36343 DSBG-40-400-PPVA-N3 1646557 stroke: 400 mm rod diameter: Ø 16 mm pmax: 12 bar New ! Dimensions: 565 x 55 x 55 mm

Fittings with plug-in connection REXROTH MECHMAN Series QR1 Standard 10 x straight fitting 212 100 405 0 10 x elbow fitting 212 200 405 0 thread: M5 hose diameter: Ø 4 mm fitting set consists of - 20 fittings ! New ! Dimensions: 60 x 60 x 65 mm

Belt cylinder NORGREN M/146025/L3/450 stroke 450 mm Piston diameter Ø 25 mm 2 - 10 bar sled1: 130 x 32 mm sled2: 130 x 75 mm used, tested ! Dimensions: 650 x 95 x 75 mm

pneumatic cylinder, standard cylinder, double-acting, with flexo coupling FESTO DNC-50-400-PPV-A 163379 stroke: 400 mm rod diameter Ø 20 mm rod thread: M16 x 1,5 pmax.: 12 bar with flexo coupling FK-M16X1,5 used, tested ! Dimensions: 740 x 65 x 65 mm

Pneumatic cylinder, standard cylinder, double-acting FESTO DNN-40-450-PPV-A 1191R stroke: 450 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25 pmax.: 12 bar New ! Dimensions: 620 x 55 x 55 mm

Pneumatic cylinder, standard cylinder, double-acting FESTO DNC-40-400-PPV 163361 stroke: 400 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25 pmax: 12 bar spare part for machining center HECKERT CWK400 D !, among others! used, tested ! Dimensions: 565 x 54 x 54 mm

Linear actuator FESTO DGPL-40-400-PPV-A-B-KF-GK-SH 175136 stroke: 400 mm piston diameter: Ø 40 mm Carriage: 167 x 82 mm pmax: 8 bar New ! with documents ! Dimensions ( Linear actuator ): 700 x 97 x 91 mm Dimensions ( packaging ): 730 x 200 x 150 mm

Pneumatic cylinder, standard cylinder, double-acting, 2 pieces FESTO DSNU-25-450-P-MH-R3 193991 stroke: 450 mm piston diameter: Ø 25 mm rod diameter: Ø 10 mm rod thread: M10 x 1,25, length 20 mm pmax: 10 bar New ! Dimensions ( pneumatic cylinders ): 570 x 40 x 32 mm Dimensions ( packaging ): 570 x 70 x 40 mm

Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table, spotting plate PAGUS working surface: 400 x 400 mm height: 100 mm used, tested ! Dimensions: 400 x 400 x 100 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate HAHN & KOLB, IFA ASCA Working surface: 400 x 400 mm DIN 876 height: 100 mm used, tested ! Dimensions: 400 x 400 x 100 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate PAGUS working surface: 410 x 410 mm height: 105 mm Heavy version Dimensions: 410 x 410 x 105 mm

fitting to Orion or Zenit filters, without seals Number available (price per tank): 70 material: NORYL  40x 40 customs no.: 84212200 More then 300 machines new and second hand on our seema .de

Clamping bracket STANKO clamping surface: 400 x 400 x 64 mm bridge width: 30 / 88 / 90 / 87 / 33 mm Groove width: 18 / 32 mm Groove depth: 35 mm Mounting surface: 400 x 270 x 35 mm 2x slotted hole: Ø 20, Length: 120 mm used, tested ! 85 KG (heavy duty) Dimensions: 400 x 400 x 270 mm

Compact cylinders, pneumatic cylinders, double-acting FESTO DNC-32-400-PPV-A 163315 1376429 piston diameter: Ø 32 mm stroke: 400 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm max. 10 bar with flexo coupling: FK-M10X1,25 ( 6140 ) used, tested ! Dimensions: 625 x 45 x 100 mm

Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours

Description: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 550 x 450 x 195 mm, weight approx.: 90 kg

Description: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 250-450 mm, Depth: 200mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 365 x 160 x 70 mm, weight approx.: 5 kg

Description: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range 250-450 mm, dp 1500 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 920 x 175 x 50 mm, weight approx.: 6 kg

Overcurrent relays, thermal relays, three-pole EAW, ELECTRICAL SWITCHGEAR OPPACH Type 4RTSP ( Type4RTSP ) TGL 5353 10 - 16 A 500 V AC for mounting on power contactors ! New ! Dimensions: 115 x 65 x 105 mm

Mobile isolation transformer, solid rubber distributor, on chassis ELSPRO series NÜRNBERG 3680002/K Power: 4000 VA Primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / primary voltage: 2000 VAbr /br / 30 V 1AC Secondary voltage: 230 V 1AC 16 A 50 - 60 Hz IP54 with thermal circuit breaker: 16 A Cable length: approx. 2.3 m New ! Dimensions: 620 x 460 x 1120 mm

Refrigeration unit, heat exchanger, cooler, chiller PHÖNIX HOCHVACUUMTECHNIK RUDOLSTADT KRY 450mb Cooling capacity: 0.4 kW at circulation temperature 32 °C Thermal output: approx. 1.0 kW Machine cooling: 1250 m3/h Air Connected load: 2.1 kVA Operating voltage: 400 V 3AC 50 Hz Control voltage: 24 V DC back-up fuse: 3x 16 A rollable, 2 swivel castors with parking brake, 2 fixed castors used, tested ! Dimensions: 1400 x 950 x 950 mm

Kat-No 09-1020 Flat bottom tank/storage tank made of V2A 40,000 litres in very good condition! Standard equipment with: • with manhole front DN 400 x 300 mm • with residual drain DN 50 mm (DIN 11851) • with 2 x connections on the manhole DN 50 mm (DIN 11851) • with level indicator DN 10 with shut-off valve • with connection cover for agitator • with filling pipe DN 30 mm • with 2 x transport eyelets •with central threaded connection socket Dimensions and weight: Diameter:2800 mm Diameter Cyl. with filling pipe upwards:3000 mm Total height:6700 mm Weight approx:3 to For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermedia ...

Composite plant Linde New VPM 305-4640 R 404A Composite with 3pcs.Bitzer compressor Type:4FC-3.2Y 4OS

Cat.-Nr. 10-1460 in a very good condition Tecnical Details: Production Capacity: 40 boxes/minute Year of Construction: 2008 6 Cups/Tray = 240 Cups/Minute = 14.400 Cups/h each Cup 125 g Measurements: Packing Sizes – LxWxH: 698,5x168,0x1,5 mm Lid – LxDxH: 95,5x95,5x9,0 mm Cup – DxH: 92,5x42,0 mm Machine Measurements: LxWxH: 7500x7400x3000 mm Weight: approx. 6800 kg Operating Instructions available Original Price: Euro 655.000,00 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

Ladies and gentlemen, we offer: Biomass Container Heating incl. storage container with hydr. Shear floor discharge Plant complete with saemt installations Heating capacity 450 kW reachable by conversions now 480 kW Hot water production Fuel: coarse, moist spaene, wood chips up to 40% HF Best measurement results: Dust content 0.04 g/m3 at exhaust temperature of 170 degrees C For more information and pictures we are available. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any w ...

Manufacturer PWH Flow capacity 400 m3 hour of bulk material Grit 0 to 30 mm Bulk weight 0.84 to 0.90 to / m3 Water content 18% Heap height 12 meters Operating voltage 380 V Control voltage 220 V Bucket capacity: 100 litres • Number of shovels: 8 pieces • Bulk per minute: 60 • Theoretical power: 360 m3/h • Effective power: 280 m3/h • Bucket wheel diameter: 3.45 m • Circumferential force (wheel): 15,000 N • Cutting speed on the knife: 1.35 m/sec • Removal height (heap height): 12 m • Discharge of the lowered wheel: 11 m • Lifting height on the paddle wheel: 6 m • Lifting speed on the paddle wheel: approx. 3 m/min • Senovice speed on the paddle wheel: approx. 3m/min • Swivel speed: approx. 12 m/min • Angle of rotation of the trolley (suspension): 360 • Angle of rotation of the trolley

Special items deep drawing film Under film white 150 my 432 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Upper foil white 70 my 415 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Roller core: 76 mm suitable for feta cheese packaging or similar Prices on request

Cat.-Nr. 09-1020 in a very good condition Standard Features: • with Manhole DN 400 x 300 mm • with Outlet Discharge DN 50 mm (DIN 11851) • with 2 x Connections on Manhole DN 50 mm (DIN 11851) • with Level Indicator DN 10 with Valve • with Connecting Flange for Mixer • with Filling Tube DN 30 mm • with 2 x Transport Hooks • with Connection Thread Measurements and Weight: Diameter: 2800 mm Diameter Cyl. incl.Filling Tube: 3000 mm Total Height: 6700 mm Weight approx: 3 ton For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 11-3231 (tank No. 402) in a very good condition description: outside: marbled – inside: 2B with Gaerspundanschluss with manhole in front 430 x 330 mms with probeer cock with clear expiry DN 65 with rest expiry with Einschweissflansch DN 65 with level indicator with strip and scale with leading holder with level ground with forwards pulled rest outlet Measurements: width: 2,550 mm depth: 5,000 mm height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 11-3234 in very good condition Description: outside: marbled – inside: 2B with fermentation lock with manhole in front 430 x 330 mms with Sample Valve with clear expiry DN 65 with rest expiry with welding flange DN 65 with level indicator with strip and scale with leading holder with flat bottom with forwards pulled rest outlet Measurements: width: 2,550 mm depth: 5,000 mm height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 11-3236 in very good condition cubically, very stable execution Description: outside: marbled – inside: 2B with fermenatation lock with manhole lid in front 430 x 330 mms with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level indicator with ladder rack with flat bottom with forwards pulled rest outlet Measurements: Width: 2,550 mm Depth: 5,000 mm Height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cooling unit Bitzer 4P-10.2Y-40P with condenser condenser for TK or Plus cooling. For more information call 00436641838175 or Info@frigocom.at

Qty. 1 Second-hand extrusion press line Mfc.: SCHLOEMANN Built: 1980 Force: 4000 MT The press was used in the brass and copper application. The press has been reconstructed and changed to aluminium application in 2005. Before the production has been stopped was the press in excellent condition. The plant has been stopped in 2010 due to ecenomical situation. Billet dia.: 8’’(203mm) - 12’’(304mm) Billet length: 1000 mm Main ram: 1400 mm dia Side cylinder: 300 mm dia. (piston head) Exit sıze of and plate: 500 mm Scope of supply: Feeding system Billet furnace Extrusion press Run aut table 45 mt long Cooling table (belt type ) Strecher force: 200-300 ton Die oven Finsihing table and saw Billet furnace ( 2 pieces) one natural gas type one induction type JUNKER Hot saw Operation desk PLC type (need sone ...

; good operational

56 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -Stand 57 / 224 trusses -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 7.00 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory amounted to approximately 550 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commer ...

- max. Hobelbreite 405 mm - min. / max. H obelhöhe 8 / 170 mm - min Werkstücklänge 250 mm - max. Spanabnahme obere Welle 5 mm - max. Spanabnahme untere Welle 5 mm - Drehzahl Messerwelle 4000 Upm. - Messerwellen FI 100 mm, Z 4 - Vorschub stufenlos regelbar 7 - 20 m/min. - Motor obere Welle 7,5 kW - Motor untere Welle 5,5 kW - Vorschubmotor 1,5 kW - Motor Höhenverstellung 0,5 kW - Gesamtleistung 15,0 kW - Absaugstutzen FI 130 mm - Arbeitstisch 482 x 2185 mm - hart vercromte Tische - schnell Wechselvorrichtung für Hobelmesser - Gleitmittelpumpe - elektronische Werkstückstärken Einstellung - Digitale Anzeige der Werkstückhöhe - CE Konformität - Abmessungen L=2200, B=900, H=1700 mm - Gewicht 1900 kg

Abrichte: - Arbeitsbreite 410 mm - max. Spanabnahme 5 mm - Gesamtlänge der Tische 2200 mm - Aufgabetischlänge 1070 mm - Abgabetischlänge 1070 mm - Arbeitshöhe 900 mm - gleichzeitiges öffnen der Tische - großer Abrichtanschlag 1200 x 160 mm - Abrichtanschlag schwenkbar bis 45C - gezahnte, auswechselbare Tischlippen - Messerwellenabdeckung Brückenschutz Dickenhobel: - Abmessungen Dickentisch 774 x 410 mm - min. / max. Arbeitshöhe 3 / 240 mm - max. Spanabnahme 5 mm - min. Werkstücklänge 180 mm - Dickentisch mit 4 Säulenführung - Dickentisch mit elekrischer Höhenverstellung und Digitalanzeige der Hobelhöhe - Vorschubgeschwindigkeit 7 / 14 m/min. - 4-Messerwelle, FI 95 mm - Abmessungen Hobelmesser 410 x 30 x 3 mm - schrägverzahnte Stahleinzugswalze - massive Rückschlagsicherung - Drehzahl 5000 U/min. - Motorleistung 5,5 KW / 400 V - Absaugstutzen FI 120 mm - Abmessungen L=2200 ...

Abrichte: - Arbeitsbreite 410 mm - max. Spanabnahme 5 mm - Gesamtlänge der Tische 1820 mm - Aufgabetischlänge 880 mm - Abgabetischlänge 880 mm - Arbeitshöhe 870 mm - großer Abrichtanschlag 1100 x 155 mm - Abrichtanschlag schwenkbar bis 45C - gezahnte, auswechselbare Tischlippen - Messerwellenabdeckung Brückenschutz Dickenhobel: - Abmessungen Dickentisch 700 x 405 mm - min. / max. Hobelhöhe 3 / 225 mm - max. Spanabnahme 5 mm - min. Werkstücklänge 180 mm - Dickentisch mit Säulenführung Durchmesser 110 mm - Dickentisch mit mechanischer Höhenverstellung - mechanischer Digitalanzeige der Hobelhöhe - Vorschubgeschwindigkeit 6 m/min. - 4-Messerwelle, FI 100 mm - inklusive BARKE Wendehobelmesser 410 mm - schrägverzahnte Stahleinzugswalze - massive Rückschlagsicherung - Drehzahl 4500 U/min. - Motorleistung 4,0 KW / 400 V - Absaugstutzen FI 120 mm - Abmessungen L=1800, B=740, H=1000 ...

2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB

Technische Daten: - Schnitthöhe 290 mm - Durchlassbreite 465 mm - Rollen- FI 475mm - Motorleistung 3,5 PS / 400 V / 50 Hz - 2 Geschwindigkeiten 380 / 820 U/min. - Tisch schrägstellbar 0C - 45C - Sägebandlänge 3610 mm - Sägebandbreite von 6 - 20 mm - Tischabmessungen 535 x 485 mm - gummierte Gußspeichenlaufräder - Kugelgelagerte Sägebandführung oben und unten - Abmessungen L=800, B=500, H=2000 mm - Gewicht 180 kg komplett mit: - gummierte und präzisionsgelagerte Gussspeichenlaufräder ermöglichen geräuscharmen Betrieb - Aluminiumanschlag mit Schnellverschluss - Maßskala am Anschlag und Lupe zum genauen Ablesen und Einstellen - Schnitthöhenverstellung einfach und schnell über Handrad-Zahnstangenkombination einstellbar - Sägebandbreite von 6 mm bis 20 mm möglich - 2 Geschwindigkeiten (380 bzw. 820m/min) - Schrägverstellung Tisch von 0C-45C über verzahnte Führung - 2 Ans ...

Technische Daten: - max. Hobelbreite 405 mm - min. / max. H obelhöhe 8 / 200 mm - min Werkstücklänge 100 mm - max. Spanabnahme obere Welle 5 mm - max. Spanabnahme untere Welle 5 mm - Drehzahl Messerwelle 5000 Upm. - Spiralmesserwelle mit HM-Wendeplatten 15x15x2,5 mm, FI 100 mm - Vorschub stufenlos regelbar 8 - 24 m/min. - Motor obere Welle 7,5 kW - Motor untere Welle 5,5 kW - Vorschubmotor 1,5 kW - Motor Höhenverstellung 0,5 kW - Gesamtleistung 15,0 kW - Absaugstutzen FI 130 mm - Arbeitstisch 482 x 2185 mm - hart vercromte Tische - motorisch angetriebenes Transportband im Einlauf - schnell Wechselvorrichtung für Hobelmesser - Gleitmittelpumpe - elektronische Werkstückstärken Einstellung - Digitale Anzeige der Werkstückhöhe - CE Konformität - Abmessungen mit Transportband L=3570, B=900, H=1700 mm - Transport Abmessungen L=2650, B=950, H=1850 mm - Gewicht 2100 kg

Technische Daten: - max. Werkstückabmessungen 400 x 250 mm - min./max. Abstand vom Sägeband zum Transportband 4 - 125 mm - Breite Transportband 385 x 5480 mm - Rad Durchmesser 711 x 51 mm - min. Werkstücklänge 200 mm - Vorschubgeschwindigkeit stufenlos 5 - 25 m/min. (Standard:15 m/min., optional:25 m/min.) - Sägebandabmessung 4470 x 27 x 0,90 mm - Antriebsmotor 15,0 kW - Hydraulik Motor 2,2 kW - Motor Höhenverstellung 1,5 KW - Spannung 400 V / 50 Hz - Absaugstutzen 4 x 100 mm - Kühleinrichtung - pneumatische Abdrückrolle im Einlauf mit Stoßdämpfer - pneumatische Andruckrolle für präzises Sägen - die Kombination von dünnem Sägeband und präziser Sägebandführung   ermöglicht die Herstellung extrem dünner Lamellenstärken - min. Lamellenstärken von 1,0 - 2,0 mm - glatter, verleimfähiger Sägeschnitt - Sägeband Schnittfuge von 1,2 - 1,6 mm (50% Materialeinsparung) - Sc ...

Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.