350 kw generator used for sale

3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site ins ...

A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...

Injection moulding machine Arburg 420S 1300-350 BJ 2000 without handling

A complete welding system with a robot and peripheral equipment is available. Welding stations: 2, robot travel path: 11000mm, max. workpiece diameter left/right: 2200mm, max. workpiece length left: 4000mm, workpiece length range right: 1000mm-5000mm, welding process: TIG, materials: aluminum/stainless steel, shielding gas: argon, overall system dimensions X/Y/Z: approx. 15350mm/5700mm/4000mm, control unit: Qirox QC2 Advanced. Including suction technology. Documentation available. An on-site inspection is possible.

formatkreissägen mit schwenkbarem sägeblatt SICAR 350 Neue Maschine Bereit zur Auslieferung SUPER RABATTPREISE mit Vorritzaggregat : Ja digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz CE-Vorschriften: JA mit Bedienungsanleitung und CE-Erklärung Volt. 380/50 Auf-/Ab- und 45°-Neigung der Sägeblätter manuell digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz schlitten mm. 3200 unabhängige Motoren hauptmotorleistung PS 7.5 motorleistung Vorritzaggregat PS 1 max. Sägeblattdurchmesser mm. 350 durchmesser Vorritzaggregat mm.120 Max. Schnitthöhe bei 45° mm. 92 Max. Schnitthöhe bei 90° mm. 120 Max. Schnittbreite an Parallelführung mm.1250 volt. 380/50

Punching force: 350 kN (holes e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shear Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side with stop cam Range of tools is included in the price

Clamping Force: 350 ton // Shot Weight (Max): 694 g

General SKU430W1384 MakeEdelstahlbau Tannroda LocationBarneveld CEcheck Type350 l Specified Features - Pressure vessel Material finishMirror polished Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume350 Ltr. Pressure6 Bar Specified Features - Pressure vessel Notified bodyClosed Capacity450 l., (350 l.) Vessel sizesDia. 800x800 mm Dished bottomcheck ManholeDN400 Top connectionscheck OutletDN30 Max. temperature-20°C/+200°C MaterialStainless steel 1.4404 (316L) General No.1765 Year of construction2017 Mounted on legsand wheels Floorspace1,10x1,10 m Total height1,70 m Weight500 kg Extra information - mirror polished inside - pressure gauge attached Fine chemicalsOther chemicalRubberPressure vesselsBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmetics ...

Offer 25348 Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of the top plate approx. 80 mm - 8 T-slots in table surface length 5500 mm - Center distance of the T-slots in the table surface 255 mm each - Center distance of the T-slots from outer edge 110 mm - T - groove width approx. 40 / 60 mm - T - groove depth approx. 62 mm - Required space L 5600 x D 2020 x H 350 mm - Weight approx. 10200 kg

General SKU218W173 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity36 KW Temp.380 °C Specified Features - Temperature control unit Thermal oil heatercheck Electric heatingcheck Heating medium:Therminol 72 Heating capacity36 kW Electric capacity42,5 kW Temperature+20°C/+380°C Tank capacity60 Ltr. With pumpcheck Capacity8m³/h Motor5,5kW 400Volt With temperature controllercheck MaterialMild steel General TypeITH 350 EX Mach.No.LSI 51392 Year of construction2008 Floorspace1,85x0,98 m Total height2,0 m Weight1240 kg ATEX designedcheckFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsTemperature control unitsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants  ...

General SKU354T960 MakeClima Temperatur Systeme TypeC+10/350/S No.007147 Year of construction2001 LocationBarneveld Pressure Working pressure25 Bar Main Features MaterialStainless steel Volume338 Ltr. Max.temp.90 °C Specified Features - Drying oven Climate box:Temperature Test Chambers: Max. temperature90 °C Capacity338 Ltr, (quantity: 0,9 kg) Internal width645 mm Internal depth710 mm Internal height740 mm Steam heatingcheck Electric capacity3,2 kW Number of doors:1 With air circulationcheck With fancheck With trayscheck MaterialStainless steel General Floorspace0,85x1,7 m Total height1,9 m Weight400 kg CEcheck Extra information Temp. bereik: 10-90 °C Vochtigheidsbereik: 10-95%rF Dauwpunt vereist 1: 5-89 °C Dauwpunt vereist 2: -19-5 °C Fine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed a ...

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-used/22410, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 5.500 kg, Type number: LLE-2644644

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 639.8 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Nominal Rpm @ Nominal Power: 1750 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 746 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508b-2gr-1953 816-used/688, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 4.000 kg, Type number: 2GR-1953816

General SKULT009 MakePharmatec GmbH TypeFluent Tank LocationGermany CEcheck Specified Features - Bioreactor Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume350 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Bioreactor Capacity350 Ltr (460 Ltr) Vessel sizesdia.791 x696mm Dished topcheck Dished bottomcheck With covercheck OutletG1: Max. temperature-10/95°C. With propellor stirrer:Magnetic ZETA, Type BMRT 125 PI Ex S Dk Y: Motor0,18kW, 230/400V, 2825rpm (EX) With variable speed drivecheck Speed mixing shaft75-540 rpm Bioreactors MaterialStainless steel 1.4404 (316L) General No.12563 Year of construction2021 Mounted on legs:platform: With switchcheck With switchgear(as is) Total height+/- 1,7 m Extra information The tank is equipped with pressure gauge, temperature sens ...

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: SAE 00 , Flywheel SAE: Unknown , Working Hours: 26381 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508-s2a-232-2 464-used/109, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 4.550 kg, Type number: 3508 S2A 232-2464

Engine Brand: CATERPILLAR, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-new/137, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LLE-2644644; Transport weight [kg]: 5500

saw blade diameter: 350 mm cutting diameter: 90 mm stroke: 160 mm mitter cutting - all-position: ± 45 ° turning speed range: U/min voltage: 380 V total power requirement: kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,85 x 1,35 m - S/N: 4296 - pneumatic feed - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brazing line manufactured in 2018. This SCAME BRAZING LINE 50-20-350-GI-DR features a maximum temperature of 1150 °C and operates with an electric power source of 85 kW. The continuous longitudinal conveyor system efficiently moves parts along a passage chamber measuring 50 x 20 x 350 cm. If you are looking to get high-quality brazing capabilities, consider the SCAME BRAZING LINE 50-20-350-GI-DR machine we have for sale. Contact us for further details.

General SKU293X474 MakeATML LifeSciences LocationBarneveld CEcheck TypeMM-JTBB360 Main Features MaterialStainless steel Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable MaterialStainless steel 1.4404 (316L) With jacketcheck General No.MM-JTBB360-0001 Year of construction2013 Mounted on legsand wheels With switchgearcheck Floorspace1,50x1,0 m Total height1,36 m Weight250 kg Extra SpecificationsWith disposable mix bags, volume 350 l.Fine chemicalsStarchStirring vesselsOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feed ...

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-used/22418, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LLE-2644644; Transport weight [kg]: 5500

Engine Brand: CATERPILLAR, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-new/136, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LLE-2644644; Transport weight [kg]: 5500

Sealpac 350 Traysealer, -

General SKU293X475 MakeATMI LifeSciences LocationBarneveld CEcheck TypeMM-JTBB360 Main Features Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With jacketcheck With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable MaterialStainless steel 1.4404 (316L) With jacketcheck General No.MM-JTBB360-0002 Year of construction2013 Mounted on legsand wheels With switchgearcheck Weight250 kg Extra SpecificationsWith disposable mix bags, volume 350 l.Fine chemicalsStarchStirring vesselsOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & p ...

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-llc-250- 7621-new/202, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3508C LLC 250-7621; Transport weight [kg]: 4350

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-llc-250- 7621-new/268, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3508C LLC 250-7621; Transport weight [kg]: 4350

: rechts Ausklink / links S fence: elektronisch ja /nein foot pedal: mechanisch weight of the machine ca.: 1,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU397X1104 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Steam Capacity25 KW Temp.70 °C Specified Features - Temperature control unit Temperating machinecheck Heating medium:Water / Glycol 80:20 Heating capacity25 kW Electric capacity51 kW, 400 volt With coolingcheck Capacity15 kW at 0 °C Temperature0/70 °C Tank capacity30 Ltr. With pumpcheck Capacity6 m³/h Motor3 kW With temperature controller(PID controller SR 500 - as is) MaterialCopper General TypeSUK 350 W Mach.No.HSK07001 Year of construction2007 Mounted on framecheck Floorspace1,2 x 1,9 m Total height2,24 m Weight1100 kg Extra information Connections (outflow/return): DN 32Compressor: Hermetic piston compressor Delivering pump: 6 m³/h Pump motor: 3 kW Filling volume (heat carrier circuit): approx. 30 L Refrigerant: R 404A Refriger ...

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 639.8 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Nominal Rpm @ Nominal Power: 1750 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 00 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508b-2gr-1044 777-used/560, , = More information =, , Type: Engine, Type number: 2GR-1044777; Transport weight [kg]: 5000

Riveting machine (1 head), Make Hang, Model 84 HS 350, Year 1992, Distance till frame 300 I5542423 mm, Rivet I5542423 transport Automatic rivet transport, Distance till frame: 300 mm, Rivet transport: Automatic rivet transport

General SKU397X1129 LocationBarneveld CEcheck MakeLauda Pressure Working pressure4 Bar Main Features Heating (medium)Electric Capacity44 KW Temp.80 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:Water/Glycol (1:1) Heating capacity1 m³/h Electric capacity44 kW, 400 volt With cooling(Water) Capacity12 kW at +10 °C Temperature0/80 °C Tank capacity60 Ltr. With pumpcheck Capacity3 m³/h Motorcheck With temperature controller(PID controller - as is) MaterialCopper General TypeSUK 350 W Mach.No.B14 730 Year of construction2003 Mounted on framecheck With switchgearcheck Floorspace1,14 x 1,5 m Total height2 m Weight950 kg Extra information Connections (outflow/return): Flanges DN50: PN16: DIN 2633Compressor: Semi-hermetic reciprocating compressor Delivering pump: Grundfos CR 5-6 (6 m³/h) Refrige ...

Offer 23330 Specifications: - Semi-automatic sawing machine with hydropneumatic - Saw blade feed - vise - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed infinitely adjustable - Pneum . Material vise - E. footswitch - Pneumatic connection 6 bar - Drive 400 V / 1.4 / 1.8 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

Simimpianti 3500×1300 veneer shelf press Shelf length 3500mm Shelf width 1300mm Two Batches Press on 8 cylinders Shelves heated with CO water Operating pressure max 300bar Piston diameter 80mm Machine Weight 7000kg Machine dimensions 435x160x235cmH Net price 65,000zł

GAS TURBINE CENTRAX PACKAGE OR ONLY CORE YEAR 1990 HOURS 40 000 PRICE LOADED IN FRANCE

Offer 25433 Specifications: - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed by hand - Material vise - Drive 400 V / 1.8 / 2.4 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

Key data: 350 mm

SPECIFICATIONS: Saw blade: Ø 350 mm Installed power: 2.8 kW Voltage: 380 V Complete with table and extraction system

A completely overhauled automatic welding station Cloos from the year 2025 including two rotary tables is available. Robot type: Romat 350, welding source: GL 300 IHPR, control system: Rotrol II, welding process: TIG. Rotary table load capacity: 2x250kg, rotary table type: WPEK-DP-KP-2.5kN, axes: 6+2+2. Documentation vorhanden. An on-site inspection is possible.

- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) Specifications: Blank diameter (max.): 700 mm Tip width : 825 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Transverse speed: (max.) 6.0 m/min Longitudinal speed: (max.) 6.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-2,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 3,500 kg

Two identical Brabender belt weighers are available. Belt width: 350mm, max. throughput: 1800kg/h, inlet diameter: 200mm, outlet diameter: 250mm, load cell nominal load: 5kg, accuracy: +/-1%, max. belt speed: 27m/min, max. bulk good density: 1.5kg/dm³. Machine dimensions X/Y/Z: approx. 1500mm/700mm/700mm, weight: approx. 180kg. Documentation available. On-site viewing possible.

Key data: 1100 kN, 25 mm

warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

Offer 25435 Specifications: - Plate length approx. 3500 mm - Plate width approx. 1750 mm - Plate height approx. 350 mm - Left + right screwed rectangular tube 200 mm each - Thickness of the top plate approx. 80 mm - 6 T-slots in table surface length 3500 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. 35 / 60 mm - T - groove depth approx. 60 mm - Space required: L 3500 x D 2100 x H 350 mm - Weight approx. 4200 kg

Height=2.3 m, Overall length= 2.06 m, Overall width= 1.2 m, Net weight= 818 kg,

Key data: 350 mm, 45 °

For sale is a professional metal cold circular saw / Miter Saw from the quality brand Pedrazzoli (type Super Brown 350/60 SA, built in 1999). Perfect for locksmithing, steel construction or tube processing. Technical data (according to nameplate & model): Manufacturer: Pedrazzoli IBP SpA (Italy) Model: SB 350/60 SA (Semi-Automatica) Year of Make: 1999 Saw blade diameter: max. 350 mm Mitre cuts: Swivelling saw head for angle cuts Equipment: Pneumatically controlled vice, pneumatic lowering cylinder for saw head, separate control panel with emergency stop & timer module as well as integrated coolant device / maintenance unit. Condition & Note: Solid base with base and drip tray. Normal signs of wear and aging from workshop use. Cabling/hoses should be professionally inspected/sorted before commissioning.

Dimensions (L/W/H): 860x1060x1060 mm Weight: 280 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2100x1900x1980 mm Weight: 3500 kg Total power requirement: 39,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3500x1500x1650 mm Weight: 2500 kg Total power requirement: 45,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 750x1400x2000 mm Weight: 137 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.