350 kw generator used for sale

Oil pump, part no. 0R2770

pneumatic cylinder, standard cylinder, double-acting SMC CP95SDB40-350-XC4 stroke: 350 mm piston diameter: Ø 40 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25, Length: 22 mm pmax: 1.0 MPa ( 10 bar ) New ! Dimensions: 515 x 53 x 53 mm

pneumatic cylinders, standard cylinders, round cylinders, double-acting FESTO DSNU-25-350-PPV-A 193991 stroke: 350 mm piston diameter: Ø 25 mm rod diameter: Ø 12 mm rod thread: M10 x 1.00 25, Length: 20 mm pmax: 10 bar Mounting thread: M22 x 1.5, length: 20 mm New ! Dimensions: 492 x 27 x 23 mm

Pneumatic cylinder, standard cylinder, double-acting SMC CP95SDB40-350-XC4 stroke: 350 mm piston diameter: Ø 40 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25, length: 22 mm pmax: 1.0 MPa ( 10 bar ) used, tested ! Dimensions: 515 x 53 x 53 mm

Linear actuator, special cylinder FESTO DGO-25-350-PPV-A-B 11917068 stroke: 350 mm piston diameter: Ø 25 mm rod diameter: Ø 26,5 mm rod thread: 2x M22 x 1.5, length: 15 mm slide: 15 x 50 x 50 mm pmax: 7 bar New ! Dimensions: 590 x 50 x 50 mm

White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...

Weiss Temperature Test Chamber KWP 64/75 Cooling-heating mode : -70°C ... +130°C Cooling: 2.5 approx. k/min Heating: 3.0 approx. K/min Temperature stability: +-0.5...+-1.0K Insertion dimensions: height 1360 mm, width 880 mm, depth 1000, mm External dimensions: height 1215 mm, width 800 mm, depth 960 mm Test chamber dimensions height 400mm, width 500mm, depth 325mm The connection voltage is: 230V/1Ph+N+PE/ 50 Hz (+6%/-10%) Gplvqvbz Connected load: 1.4 kVA Plug: Schuko 16A Weight : 180 kg Type: KWP 64/75 The Weiss temperature chamber has been monitored with calibrated and calibrated test equipment!

Brush machines with injection molds Our entire machine park from the brush department is for sale. We sell machines with injection molds. The full list of machines and injection molds is in the attachment.

KWANDONG”(2x) DOOSAN 746 kW each (2006) Gross/Net tonnage 56/38; L X B X D; 23.5 x 4.80 x 2.05 M Ship name: HHIC-2 Port of registry: Philippine Subic Delivery day: 2006.12 Gross Tonnage: 40 Tons Class: Korea Society of Ship Inspection & Technology Capacity: 60

Linear guide carriage INA KWVE-25-WL-UG G3-V1 009-191-518/0431 New ! Dimensions (packaging): 200 x 140 x 70 mm

Heating controller KIEBACK & PETER KWH-A 24 V ( 24V ) ambient temperature: 0...50°C New ! Dimensions: 150 x 135 x 100 mm

Dual Inverter, Compact Inverter AMK AMKASYN KWD 2 Version 03.21 2x 2.0 kVA Input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 1x Regulator card: AMK KW-R03 used, tested ! Dimensions: 320 x 200 x 55 mm

Dual inverters, compact inverters AMK AMKASYN KWD 2 Version 03.11 2x 2.0 kVA input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x regulator card: AMK KW-R03 used, tested ! Dimensions: 320 x 200 x 55 mm

Dual Inverter, Compact Inverter AMK AMKASYN KWD 2 Version 03.21 2x 2.0 kVA Input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x Regulator card: AMK KW-R03 used, tested ! Dimensions: 320 x 200 x 55 mm

Cooling module for welding machines, circulating air cooling module for water-cooled welding machines KJELLBERG KWE 501 400 V Dimensions: 530 x 335 x 395 mm

single-line pump, central lubrication, lubrication pump VOGEL MKU2-KW3-22013+428 Q: 0,2 l/min p: 30 bar engine: 0.105 kW 2700 rpm 230 V 1AC 50 / 60 Hz tank capacity: 2.7 l used, tested ! Dimensions: 300 x 140 x 300 mm

Centrifugal pump, water pump, KSB KWPKA 80-250 Q: 27.8 l/sec. ( 100 m3/h ) H: 20 m Intake side: Internal diameter: Ø 100 mm Flange diameter: Ø 160 / 210 mm pressure side: Internal diameter: Ø 80 mm Flange diameter: Ø 1 1 40 / 200 mm Engine: SIEMENS 1LA5163-4GA70 11 kW 1455 rpm 380 / 660 V 3AC 50 Hz New ! Dimensions: 1270 x 600 x 600 mm

Dual inverters, compact inverters AMK AMKASYN KWD 2 Version 03.21 2x 2.0 kVA input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x controller card: AMK KW-R03 spare part for cylindrical grinding machine NOMOCO VSR5-230-CNC !, among others used, tested ! Dimensions: 200 x 55 x 320 mm

Dual inverters, compact inverters AMK AMKASYN KWD 2 Version 03.07 2x 2.0 kVA input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x controller card: AMK KW-R03 spare part for cylindrical grinding machine NOMOCO VSR5-230-CNC ! used, tested ! Dimensions: 200 x 55 x 320 mm

Single-line pump, for fluid grease, central lubrication, lubrication pump SKF MKF1-KW2-20001+428 Q: 0,0,1 l/min pmax: 30 bar engine: Shang Yi Motor 178-900-043+428 230 V 50 / 60 Hz 0.12 / 0.15 kW ( 120 / 150 W ) Without tank ! New, with documents ! Dimensions ( pump, upright ): 215 x 135 x 285 mm Dimensions ( packaging ): 380 x 310 x 140 mm

Linear guide carriage, ball guide carriage REXROTH KWD-020-SNS-C1-N-1 R162281420 Height Guide carriage: 25.35 mm design: SNS ( narrow, normal, standard height ) nominal size: 20 mm New, with underlays ! Dimensions ( Linear Guide Carriage ): 75 x 44 x 26 mm Dimensions (packaging): 90 x 70 x 35 mm

Description: 5.28 KWp New solar modules 16x Trina TSM-330DD06M.05 polycrystalline solar modules packed with 16 solar modules each on a pallet. Pallet NO. 2 Nominal power per solar module: 330 Wp Condition of solar modules: new Logistical data solar modules: 1,700 mm x 1,00 mm x 35 mm Logisticdata: Dimensions per pallet: 1,800 mm x 1,200 mm x 760 mm Weight per pallet module: 315 kg Total weight: 315 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 760 mm, weight approx.: 315 kg

Description: 4.59 KWp New solar modules 3x DMEGC DM495M10-66HSW, 2x DMEGC DM450M6-72HSW, 5x Suntech STP450-B72/vhn solar modules mono packed with 10 solar modules each on a pallet. Pallet NO. 1 Nominal power per solar module: 450 Wp, 495 Wp Condition of solar modules: new Logistical data solar modules: 2,092 mm x 1,038 mm x 35 mm, 2,092mm x 1,135mm x 35mm, 2,095mm x 1,038mm x 35mm, Logisticdata: Dimensions pallet: approx. 2,100 mm x 1,200 mm x 550 mm Weight pallet modules: approx. 270 kg Total weight: 270 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 2,100 x 1,200 x 550 mm, weight approx.: 270 kg

Description: 8,255 KWp New solar modules 3x Jinko JKM54HC-B, Longi LR5-54HIB-400M, Jinko JKM400M-54HC4-B, Denim UM3410BB108H, Canadian CS6R-430H-A6, Jinko JKM420N-54HC-4-B, Hyundai HiE-S410VG solar modules packed in 20 solar modules each a palette. Pallet NO. 4 Nominal power per solar module: 400 Wp - 430 Wp Condition of solar modules: As good as new Logistical data solar modules: 1,720 mm x 1,134 mm x 30 mm, 1,720mm x 1,194mm x 30mm , 1,722mm x 1,134mm x 30mm , 1,722mm x 1,134mm x 30mm , 1,720mm x 1,130mm x 30mm , 1,720mm x 1,140mm x 35mm Logisticdata: Dimensions pallet: approx. 1,800 mm x 1,200 mm x 825 mm Weight pallet modules: approx. 450 kg Total weight: 450 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 825 mm, weight approx.: 450 kg

Description: 5,705 KWp New solar modules 2x Canadian Solar CS3L-360MS, 1x Longi LR4-60HPB-360M, 1x Jolywood JW-HD120N-380, 3x Denim M2B375BT620H, 2x Longi LR4-60HPH-375M, 3x Risen RSM40-8-390MB, 3x URECO FBK400MFD solar modules packed ever 15 solar modules on a pallet. Pallet NO. 3 Nominal power per solar module: 360 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,770 mm x 1,048 mm x 35 mm, 1,754mm x 1,037mm x 34mm, 1,756mm x 1,038mm x 35mm, 1,754mm x 1,037mm x 35mm, 1,254mm x 1,038mm x 35mm, 1,750mm x 1,095mm x 30mm, 1,722mm x 1,133mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 675 mm Weight pallet modules: approx. 332 kg Total weight: 332 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 675 mm, weight approx.: 332 kg

Description: 3,795 KWp New solar modules 1x Neo-Solar D6N29E3A, 1x JA-Solar JAM60S02-300, Hanover Solar HS300M-30D, Hyundai HiE-345SG, JA-Solar JAM54S31-390MR, Jinko JKM390N-6RC3-B, Denim UM3450BB120H solar modules packed with 11 solar modules each on a pallet. Pallet NO. 6 Nominal power per solar module: 300 Wp - 450 Wp Condition of solar modules: New Logistical data solar modules: 1,640 mm x 990 mm x 30 mm, 1,650mm x 990mm x 30mm , 1650mm x 990mm x 30mm , 1,620mm x 1,070mm x 30mm , 1,720mm x 1,030mm 30mm , 1,850mm x 1,630mm x 30mm , 1,910mm x 1,130mm x 30mm Logisticdata: Dimensions pallet: approx. 1,950 mm x 1,200 mm x 550 mm Weight pallet modules: approx. 255 kg Total weight: 255 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,950 x 1,200 x 550 mm, weight approx.: 225 kg

Description: 6,235 KWp New solar modules JA-Solar JAM60S02-300/PR, Canadian CS3L-375MS, Trina TSM400DE09.08, Trina TSM-390DE09.05, Canadian CS6R-400MS, Phono-Solar PS400M6H-18NH solar modules packed with 16 solar modules each on a pallet. Pallet NO. 5 Nominal power per solar module: 365 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,668 mm x 1,050 mm x 35 mm, 1,764mm x 1,047mm x35mm , 1,753mm x 1,095mm x 30mm , 1,754mm x 1,096mm x 30mm , 1,754mm x 1,096mm 30mm , 1,721mm x 1,133mm x 30mm , 1,720mm x 1,132mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 740 mm Weight pallet modules: approx. 359 kg Total weight: 359 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 740 mm, weight approx.: 359 kg

Technische Daten: - Kettenbreite 350 mm - Schnitthöhe 10 - 135 mm - max. Sägeblatt FI 405 mm - min. Sägeblatt FI 355 mm - Sägeblattbohrung FI 80 mm - min. Werkstücklänge 740 mm - Arbeitshöhe 745 mm - Drehzahl 2600 Upm. - Vorschub 2,5 - 24 m/min. - Motor Sägewelle 37 kW - Motor Vorschub 2,2 kW - Gesamtanschluss 39,2 kW - Digitalanzeige für Zufuhrgeschwindigkeit - Sägebüchse mit einem Satz Flanschringe - Rückschlagsicherung - automatisches Schmiersystem - automatischer Stern-Dreieckschalter - Einlaufrollenbahn Länge 1500 mm - Auslaufrollenbahn Länge 1500 mm - Absaugstutzen 2 x FI 150 mm - Transport Abmessungen L=2100, B=1900, H=1980 mm - Abmessungen mit Ein- und Auslaufrollenbahn L=4460, B=1780, H=1880 mm - Gewicht 3500 kg - CE-Ausführung

Schnitzen wie ein Profi, geeignet zum Kopieren von Figuren, Bildern und Schriften, egal ob aus Holz, Metall, Stein, Kunststoff oder anderen festen Materialien. Technische Daten: - die ideale Maschine für Profi und Hobbyschnitzer - Kopieren von Figuren - Kopieren von Bildern und Schriftzügen - Fräslange max. 500 mm - Fräsbreite max. 350 mm - Werkzeugaufnahme Spannzange 8 mm - Spannhals 43 mm - Elektronik Fräsmotor 1050 W mit Vollwellenelektronik, dadurch immer materialgerechtes Arbeiten möglich. - Drehzahl 10000 - 32000 U/min - Abmessungen LxBxH 1200 x 750 x 1150 mm - Gewicht ca. 50 kg - solide, robuste und schwingungsarme Bauweise - leichte Handhabung - wartungsfreie, nachstellbare Linearführungen - hohe Lebensdauer - Made in GERMANY

GINES, Barcelona 800mm wide x 350mm dia two roll mill, Machine number: 88, manual nip adjustment, adjustable guide plates, friction ratio 1:1.18, direct drive gearbox (on left hand side), with 60HP DC variable speed motor, Mentor II DC drive control panel. O/a dimensions 2750mm x 2100mm.

Extruder with vacuum vertical prepress LVP-35, gearbox overhauled in 2011, screw wings equipped with carbide. Press equipped with DC motor 60 kW (can be converted to 55 kW three-phase motor at an additional cost). Machine is functionally tested and comes with some spare parts.

Extruder with vacuum pre-press LVP-35, gearbox refurbished in 2011, extrusion helix plated with hard metal bits. Press is equipped with a 60 kW DC drive (can be replaced by a 55 kW AC drive at anextra charge). The machine is test-run and comes with spare parts.

Technische Daten: - Absaugleistung 3500 m3/h - Motorleistung 3,0 kW - Drehzahl 3000 Upm - Spannung 400 V, 50 Hz - Ansaugstutzen Durchmesser 220 mm - Reststaubgehalt 0,2 mg/m3 - Filtermaterial Polyster, 2 micron - 12 Schlauchfilter 160 x 1000 mm - Filterfläche 6 m2 - 1 Spänesäcke, je 300 Liter - Absauggeschwindigkeit 28 m/sec. - fahrbar - Filterreinigung mit Rüttelmotor inklusive Steuerung - Abmessungen L=1320, B=730, H=2500 mm - Gewicht 160 kg

Fluid mixer for tempered mixing with double sheath, 350 l. content (usable volume: 100 l. - 280 l.), outlet sideways, pressure-resistant up to 10 bar, product-contacted parts made of V2A 1.4541; without tools.

Fluid mixer for tempered mixing with double jacket, 350 l. capacity (net capacity: 100 l. - 280 l.), lateral oulet, pressure proof up to 10 bar, product touched parts in V2A 1.4541; without mixing tools.

Ladies and gentlemen, we have various transformers for sale services of 630KVA to 3500kva Voltage 10KV 15Kv 20KV 22kv, 30kv 33KV immediately available and nationwide available TEL. 01727265324

Technische Daten: - 4 Spaene-Tonnen mit Klemmbuegel 600 x 500 mm - Reststaubgehalt: 0,1 mg/m3 - Loeschautomatik mit Pulverlöschung - Ein- / Ausschalter - Volumenstromueberwachung - Druckdifferenzanzeige - Leistungsaufnahme: 11,0 kW - Netzspannung: 400 V / 50 Hz /3 Ph ~ - Stromaufnahme: 32 A - Filterflaeche: 45,2 m2 - 120 Stück Filterschläuche - Filterregeneration: automatisch, pneumatisch JET-System - Volumen-Staubtonnen: 4 x 200 L ges. 800 Liter - Ansaugstutzen: 350 mm - Volumenstrom: 8640 m3/h - Unterdruck 3600 Pa - max. Schalldruckpegel 72 dB (A) - Abmessungen: L= 5470 mm, B= 1.100 mm, H= 2.500 mm - Gewicht: 1100 kg

Height indicator, parallel indicator -Max. Working height: 350 mm -Hard metal needle -Dimensions: 200/90/H545 mm -Weight: 3.2 kg

Sahinler 4RHSS 32-350 Plate rolling machine - 4 rolls Machine is in good condition Side supports Lifting system NC Control

- Euromap: E12 press, E67 robot, connected by E12 / E67 converter - Including Wittmann W733-0398 robot 2007, X900, Y1800, Z3000, C-pneu - Screw diameter: 55 mm - Injection volume: 617 cm? - Screw L/D ratio: 20 - Clamping force: 3.500 kN - Mould height max: 860 mm - Mould height min: 250 mm - Cascades / Sequential valve gates: 4 - Platen size (h x v): 1.080 x 1.080 mm - Distance between tie-bars (h x v): 735 x 735 mm - Ejector force: 3.500 kN - Control: CC100

ROBOT ENGEL ERC65 X-axis 800 (EUROMAP standar) Y-axis 1400 Z-axis: 2840 A-axis C-axis 2 x vacuum 3 x gripper - Screw diameter: 60 mm - Shot weight max: 650 g - Injection volume: 769 cm? - Screw L/D ratio: 23 - Ejector stroke / force max.: 250 / mm / kN - Clamping force: 3.500 kN - Mould opening stroke max: 1.300 mm - Mould height max: 920 mm - Mould height min: 380 mm - Daylight between platens max: 1.300 mm - Platen size (h x v): 1.060 x 1.095 mm - Cascades / Sequential valve gates: 6 - Distance between tie-bars (h x v): 710 x 710 mm - Control: MC 4 - Core pulls: 5 - Power: installed max: 55 kW - Dimensions (long x wide x high): 6.500 x 2.100 x 2.380 mm - Weight: 15.500 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 55 mm - Shot weight max: 460 g - Injection pressure: 1.650 / 2.050 bar - Injection volume: 510 cm? - Clamping force: 3.500 kN - Mould opening stroke max: 1.000 mm - Daylight between platens max: 1.650 mm - Platen size (h x v): 1.200 x 1.100 mm - Distance between tie-bars (h x v): n/a mm - Control: CC200 - Core pulls: 4 - Power: installed max: 45 kW - Dimensions (long x wide x high): 7.500 x 2.200 x 2.400 mm - Weight: 27.000 kg

Description: Type : ÖLtransformator Version : Hermetic Make : CG POWER SYSTEMS Belgium NV B7ssq0vkzj Year of construction : 2012 Condition : New with 1 year warranty Rated power : 3500 KVA Medium voltage : 33 KV +- 2 x 5% Low voltage : 400 V Switching group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Total weight : 7750 Kg Oil weight : 1720 kg Synth. ESTER Length : 2400 mm Width : 900 mm Height : 2250 mm + 160mm cable flag Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery . For further questions available Mon to Sat. 8 a.m. to 10 p.m.

Servo motor, permanent magnet motor PARVEX LX440CFR3000 5.7 Nm 3500 rpm IP64 shaft diameter: Ø 19 mm flange: 90 x 90 mm New ! with documents ! Dimensions: 265 x 90 x 125 mm

Pneumatic cylinder CPOAC Ø 63 stroke: 350 mm

Surge arrester PHOENIX CONTACT FLT-CP-3S-350 28 59 71 2 Nominal voltage: 240 / 415 V AC 50 / 60 Hz Highest continuous voltage: 350 V AC Nominal load current: 125 A used, tested ! Dimensions: 143 x 90 x 70 mm

Standard luminaire, universal luminaire, control cabinet luminaire RITTAL SZ 4138.350 ( SZ4138.350 ) 30 W 230 V 50 Hz IP20 door position switch SZ 2586.000 without bulb ! used, checked ! Dimensions: 990 x 150 x 80 mm

Surge arrester PHOENIX CONTACT VAL-CP-3S-350 28 59 52 1 3x VALVETRAB 28 59 60 2 Rated voltage: 240 / 415 V AC 50 / 60 Hz Highest continuous voltage: 350 V AC used, tested ! Dimensions: 90 x 50 x 70 mm

Fuse insert, fuse element, semiconductor fuse, with screw tabs, 3 pieces SIEMENS SITOR 3NC8 431-3 ( 3NC8431-3 ) Size: NH3 Rated current: 350 A Rated voltage: 660 VAC / 440 V DC Operating class: gR Installation length: 110 mm Other quantities on request ! New ! Dimensions ( single fuse ): 140 x 70 x 80 mm Dimensions ( packaging ): 225 x 160 x 95 mm

Diaphragm accumulator, bladder accumulator, pressure accumulator OLAER IHV 4-350-90 ( IHV4-350-90 ) capacity 4 l Pmax: 350 bar used, tested ! Dimensions 430 x 170 x 170 mm