350 kw generator used for sale

: 350 mm : 4160 mm : 400 mm : 350 mm : 400x350 mm dimensions of saw-band: 4160x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 420 mm, 1500 mm, 3000 1/min

Stock number: 3979 CNC LATHE Manufacturer: MAZAK, Type: QTN 350 M Year of Make: 2005 Specifications: Max. circumferential diameter 420 mm dia. Max. turn. About bed 700 mm DIA. Turning length 1500 mm Main motor power 30 kw Spindle bore 102 mm dia. C axis - main spindle movement 0.001 degrees Tool turret with 12 stations Motor Power Driven Tools 7.5 Kw Powered tools. 25-4500 rpm Control Mazatrol 640T NEXUS Fabr. Controlled in 3 Axes Accessories: Various tool holders. Tool setter Chip conveyance. Cooling water system. Length: 4300mm, Height: 2400mm, Width: 2600mm, Weight: 7900 kg

WITH CUTTING DEVICE S. No.: 98 0044 10

Key data: 1300 mm, 117 , 35

Producent: Arburg Typ: 470 S 1300 - 350 Rok produkcji: 1999 Sterowanie: Selogica Typ zamknięcia: Hydrauliczny Siła zamykania: 1300 kN Rozstaw prętów: 470 mm x 470 mm Rozmiar płyty: 650 mm x 650 mm Wysokość narzędzia: min 275 mm Odległość otwarcia: 575 mm Maksymalna odległość między płytami: 850 mm Śruba: 35 mm Objętość skoku: 139 ccm / 117 gram PS Ciśnienie wtrysku: 2500 bar Ogólne Silnik: 22 kW Ogrzewanie: 8,8 kW Wymiary: 4,5 m x 1,6 m x 2 waga: 5100 kg Tekst na ekranie: niemiecki Dodatkowe wyposażenie/wyposażenie Rdzeń ciągnący: x1 Euromap Gorące strefy

Refer to code 1154 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1159 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Motor output: 3 kW Filter capacity: 6 m² : 3500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Continuous mixer in stainless steel As good as new Motor drive 7.5 KW Capacity up to 15 t/h Fluid addition up to 3%

We offer Doka Eurex 20- 350 WB Supports cleaned and checked. Original Doka rental storage quality. The support corresponds to the Doka Eurex Eco series. Doka Eurex 20-350 WB. 39,50€/ Piece Doka stacking pallet 1.55m x 0.85m = 120€/ piece Column class B/D according to standard EN 1065 General technical approval Z-8.311-942 High load capacity of up to 36.7 kN depending on extension length, minimum load capacity of 20 kN for each extension length Numbered and embossed stake-out holes and ergonomic stake-out bracket for easy and quick height adjustment Fast and safe loosening of the forged adjustment nut even under load thanks to special thread geometry Crush protection (10 cm free space when the support is inserted) and fail-safe (protection against falling out of the inner tube) for safe work Long service life due to high-quality zinc plating Quick connection for ten ...

Wrapping Machine with mechanization / roller conveyors in front/behind the machine

The reverse osmosis system is used for the desalination of softened water with a salt content of up to 1,000 mg/l. It is equipped with a high-quality centrifugal pump with frequency converter (FU). Frequency control reduces electricity costs by 30 - 50 %, extends the life of the system and keeps permeate production constant regardless of operating pressure. The RO digital microprocessor control enables fully automatic operation with logging of all relevant operating data and freely adjustable limit values. The system can be connected to the central control system via optional interfaces. Advantages : Equipping with FU saves 30 - 50 % on electricity costs, keeps permeate production constant and enables longer service life and particularly quiet operation Versatile RO digital control with storage, operating data and many setting options Optional equipment with PLC Siemens S7-1200  ...

for 100-600 g , 350 - 1000 g

for 100 - 600 g, 350 -1000 g

Mobile extraction Make: Riedex Type: DM 350 New machine Technical data: - Motor power 11 kW - Nominal volume flow 6297 m³/h - max. volume flow 8000 m³/h - 49,6 m² filter surface - motorised cleaning - Residual dust content

label banding machine Tünkers Liliput 350; cleaned and tested; Working width 350mm; suitable for cold glue; 2 machines in stock. Gluing machine for labels Tünkers liliput 350; cleaned and chekced; working width 350mm; used for cold glue; two machines on stock.

Knapp roller conveyor 2200-350-280 RA2326 Make: Knapp Roller width (RB): 280 mm Nominal/outer width (NB): 350 mm Length: 2200 mm, Additional extension segments available Roller diameter: 50 mm Roller distance: 110 mm Motor Roller conveyors: Leroy Somer Electrical Data 380V, 0,37kW Height frame: 76 mm, 276 with Motor Please note that the extension element is not driven without the drive station! Optionally available: Additional segments to extend length frequency converter for stepples speed control Supports Side guide one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Electric data: 0,37 kW condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 350 Roll width in mm: 280 Roll division in mm: 110 Driven: YES, NO scope of delivery: without supports and side guides For individual, expert advi ...

Manufacturer: Düspohl, Type: DTS 350 E, Year: 1997, kW Leistung Stück: 4, Through running hight mm: 125, Working width mm: 330, Feeding speed min-max m/min: 100, Feeding speed continous adjustable: yes, Year :1997

Manufacturer: Cefla, Type: TR 3500/A-D, Year: 2015, incl.control: yes, Length-width mm: 3500x1300, Programming possible: yes, Length mm: 3500, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Drive power kW: 0,8, Year :2015

Manufacturer: Kaltenbach, Type: TL 350, Control: hand, Saw blade diameter mm: 350, kW output per motor: ca.2, Saw blade tiltable vertikal up to °: 45-90-45, Length control by: no,

Manufacturer: Cefla UV 1 Lampe, Type: TTV 3500, Year: 2003, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 100, Working widht max mm: 1300, Number of lamps: 2, kW power 1 lamp: ca.12,5, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 120, Conveyor lenght mm: 3500, Chain pitch mm: 140, Working hight approx mm: 930, Feeding speed m/min: 10-22, Conveyor: Stange, Drive power kW: ca.0,75, Exhaust air diameter mm: 250, Year :2003

Manufacturer: Dimter , Type: Profipress 3500, Year: 2003, Continuous flow system: yes, Work piece width min-max mm: 300 - 3500, Min.-max. workpiece length in mm: 1300, Min.-max. workpiece height in mm: 11 - 60, Hydraulical/pneumatical: yes, High-frequency: yes, Warm water: yes, Thermoöl: yes, High / low pressure: yes, Cylinder vertical: yes, Cylinder horizontally: yes, Pre-assembling conveyor: yes, Glue application machine: yes, Clamping: yes, Disc saw transverse: yes, FREE TEXT: 2800 Betriebsstunden, Year :2003

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmC-Axis Speed100 rpmMax. torque (40% DC)192 NmTorque of C-Axis (holding torque)168 NmWork spindleSpindle diametre on front bearing120 mmSpindle noseA2-6 Spindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Speed max.6000 rpmNumber of driven tools12 Power max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (40% DC)14 kWDrive power (100% DC)12,6 kWSpeed range-5500 rpmTorque (100% DC)171 NmC-Axis Speed100 rpmMax. torque (40% DC)192 NmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmGeneral2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Main drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Main drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

Key data: 1600 mm, 3500 mm, 800 mm

For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: Esmena Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 14,135 mm Number of fields per row of shelves: 05 pcs Number of levels plus ground level: 05 pcs. Technical data on the volume: Pallet spaces per field: 18 pcs. Number of pallet spaces per row: 90 pcs. Total number of pallet spaces: 90 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 800 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Heigh ...

Stainless steel tank 3500 litres with SCABA agitator and measuring technology Manufacturer: SCABA Tank Type: Stainless Steel Tank with Agitator Volume: 3500 l Year of Make: 1997 Quantity available: 2 pieces Agitator: SCABA Motor power: 0.37 kW Degree of protection: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Metrology: Endress+Hauser Liquiphant Power supply: 10-55 V DC Equipment and accessories Agitator completely assembled Internal mixing system with stirring blade Manhole with lid Filling opening with grid insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated in the base frame Outlet at the bottom with connection

Description SILICONE PRESS 12 zone mold heating water channels 2 zones 6-zone thermoregulator control WAGNER Reinhardt-Technik pumping unit mod. LSR 200l and Twin year 2017

Description Electrical charge

Description Hot rooms 8 areas Magnetic plates brand Tecnomagnete

Pressure: 10 bar Motor: 4,4 kW Free air delivery: 0,52 m³/min Measurement (WxHxD): 1895 x 1280 x 720 Weight: 290 kg Compressed air connection: 1/2

Pressure: 15 bar Motor: 3,2 kW Free air delivery: 0,297 m³/min Measurement (WxHxD): 775 x 520 x 510 Weight: 70 kg Compressed air connection: 3/4

Pressure: 10 bar Motor: 15 kW Free air delivery: 2,22 m³/min Measurement (WxHxD): 1815 x 1365 x 720 Weight: 380 kg Compressed air connection: 1

Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2

Description Voltage: 380 V Approximate capacity: 350 L Motor power: 0.37 Kw Loading hopper: No Width: 800 mm Length: 800 mm NEW GEARBOX AND WHEELS.

Description Press with electric extruder

Description Hot runner: 6;

Description Hot runner: 6;

Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2

Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2

Load stand, swivel stand, lifting stand, shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread -Quantity: 7 pieces -Height: 220 mm -Base plate: 450 x 350 x 20 mm -Shackle plate: 146 x 146 mm, M42, 4 pieces with shackle -Price: complete -Dimensions: 450/350/H220 mm -Weight: 42 kg/unit

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Rezess: Ø 80 mm -Hole circle: Ø 127 mm -Through hole: Ø 40 mm -Weight: 40 kg

PLC control, supply unit, converter, power module, U/E module, digital power amplifier -Manufacturer: Hydraulik Ring, digital power amplifier -Type: VRD 350 -Voltage: 24 V -Dimensions: 220/80/H130 mm -Weight: 0.8 kg

CNC Machining Center Hedelius BC 100 P-3500 Magnum Control: Siemens Sinumerik 840D Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm T-slots 5 pieces Distance T-slots 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Mount: DIN 69871 SK 50 Tool magazine: 50 – compartment Spindle speed: 20 - 4,500 rpm Accessories - Door automation - Handheld operator - Machine hood -Conveyor