129,676 used machines on RESALE, but how to find them? Machine Search
Working width_ 600 mm Working height_ 300 mm N of knives_ 3 OTHERS AVAILABLE FROM STOCK
Key data: 3000 , 1500
Technical data: Height 300 mm Length 3.000 mm Width 1,500 mm
Belt Rounder BR-300 XL - Exhibition machine, brand new condition, year of manufacture: 2022 - working range 180 - 2.500 g, moulding length 3000 mm, capacity range up to 2.400 pieces per hour, suitable for soft wheat -, wheat-mixed -, rye-mixed -, and rye doughs, with two motors (one for each belt), frequency inverter for stepless speed control, angle of inclination of the belts can be adjusted, movable lower frame made from stainless steel, machine covers and electrical box made from stainless steel, electric flour duster (mounted on the inlet) with photocell-control
Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl
Plates for filler Handtmann VF 80 , VF 200 , VF 300P - NEW cataog number 834403 Plates for filler Handtmann VF 300 - NEW Catalog number 834401 Plates for filler Handtmann VF 611, VF 634 - NEW Catalog number 860678 Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
Lock valve vacuum pump Status: used, tested, functional Manufacturer: Kinney Type: KT-300 D Engine: 400V equipment: mineraloil nominal suction digesters: 25 m3/h End pressure: <0.008 mbar (abs.) Including: user manual o elfilling (
Screw Vacuum Pump - Unused Manufacturer: Alcatel / Adixen Type: A 300 P Motor: 380-460V Status: Used; As Performance: 12 months Suction power: 320 m3/h connection: ISO-K 63 final pressure: approx. 1.2x10-2 mbar (abs.) Including: user manual ; ready for use
Seydelmann frozen meat grinder GW 300, all stainless steel, for frozen block up to -25 degrees, measurements max. 900/500/150 mm, hopper capacity approx. 450 liters. You are very welcome to test the machine in our facility in Koblenz, Germany.
Rotary vane vacuum pump oellubized Manufacturer: Leybold Type: Sogevac SV 300 B Cat No.: 960702 Status: Preliminary performance as goodas nominal power suction power: approx. 280 m3/h end pressure: approx. Gas ballast Special equipment: thermal switches, FKM seals Performance: 12 months Zubehoer: user manual, mineral filling delivery time: from stock; ready for use
Number of sanding units: 2 St. sanding width: 290 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Leybold pump stand Consisting of: pump 1 Leybold Sogevac SV 300 (optionally with water cooling or air cooling) pump 2 Leybold Ruvac WAU 1001 H The individual pumps or the entire frame can be transferred. A service is 12 months in a general recovery. Several frames, versions available!; ready for use
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 6mm total power requirement: 11 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4880 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The CE15 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-170 50Hz 170 bar 40 l/min. CE15-200 50Hz 200 bar 36 l/min. CE15-200 60Hz 200 bar 30 l/min. CE15-300 50Hz 300 bar 18 l/min. CE15-300 60Hz 300 bar 22 l/min. General Specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.
New SGB transformers 1000KVA power voltage: 10/20kv - 690V SWITCHABLE other services and voltages also available easy questions! SEE photos was still never used available now 6 PCs of nationwide cheaper delivery issues is always available: Mr Serhan 01727265324 or e-mail: Transformatoren@gmx
The CE100 series is an electrically driven high-pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE100-300-135 CE100-500-80 CE100-1000-42 CE100-1400-28 CE100-2050-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 75 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 1800 mm x 1050 mm x 1400 mm Weight: 2000 kg Includes standard accessories.
GEA-CFS” fryer Type BRN 3000/500 all stainless steel electrically heated 84 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control teflon-infeed extra infeed conveyor 5 mm extra outfeed conveyor 5 mm oil circulation pump filter sediment removal system electrical hoists fire protection total length ± 6.650 mm total width ± 1.500 mm total height ± 3.200 mm
The CE150 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Drive motor power: 90 kW (50Hz) / 110 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.
The CD160 series of our high-pressure machines covers a pressure of 200 to 2500bar and a volume flow of 25 to 300 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine with turbocharging and charge air cooling. The entire frame is made of hot-dip galvanized steel, which ensures long durability and corrosion resistance. For the beautiful look, the frame is primed and then painted. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet, forklift pockets and, at all four corners, with lifting eyelets. The machine has a galvanized roof plate with a side bracket for the protection and storage of, for example, high-pressure hoses. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD160-200 200 bar 300 Lpm CD160-250 250 bar 250 Lpm CD160-1000 1000 ...
Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) - potential energy: 300 Joule - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items ; new
with gas burners Weishaupt new glass wool new stainless steel sheets New storage engine Power Max 465 kW the boiler is uberholte with gas burner Weishaupt with new glass wool new grid grate Engine re-stored Power Max 465 kW the boiler is overhauled
Technical data for the pallet rack traverse: Shelving system: Stow Type: Pal Rack OP Included in delivery are: 01x pallet rack traverse, used Material color: blue Box profile: 110 x 50 mm Clear width: 1,300 mm load per pair of trusses 2,000 kg, with the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.
Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...
Cantilever rack NEW Data: - H : approx. 300 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilevers : approx. 120 cm - Axle dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilevers in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm pitch. - Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stand, incl. base approx. 300 cm made of IPE160. - 12 x cantilevers approx. 120 cm made of IPE 80 - incl. all necessary fasteners and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf stands and cantilevers are statically detectable, at 100% load. - All racking systems are supplied in hot-dip galvanized version. They can therefore be placed insi ...
Double grinding buck Rema with cue equipment, large collecting tray, new condition. Grinding wheel diameter 300mm, 1.8kw Special price
Deutz emergency generator set 300 kVA Emergency system - - - - - Engine - Deutz (Germany) - 12 cylinder V12 -Diesel -Water-cooled - 1500 rpm - - - - - Generator - Manufacturer: AvK A. van Kaick (Germany) - 300 / 330 KVA - 230 / 400 volts - 50 Hertz - - - - - Condition: - The generator set is purely an emergency system - The device was used for emergency power protection in a hospital - Regular maintenance and test runs were made - The motor runs well and the generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - Deutz generator set 300 / 330 kVA - Consisting of the Deutz engine and the AvK generator - - - - - Dispatch: - A Germany-wide transport is possible for an extra charge - In order to be able to give an exact freight price please send me a request with your postal code - - - - - Price: - 12.750,- € + 19 ...
Unused Düchting Centrifugal Pump Type HK200x6 Year of construction 2015 Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 300 m³/h H 490 m N 1480 1/min P 560 kW Further Düchting pumps in stock Applications: Conveyance of contaminated, chemically neutral or aggressive liquids with up to 10% solids content. Main water drainage in mining Secondary water drainage and mine air cooling in mining Pressure boosting systems in industrial processes Water supply and water treatment plants Condensate conveying Mineral fertilizer industry Oil & Gas Applications LHK125x6 HK150x11 Q150m³/h H730m n1485 1/min P430kw HK250 HPXU100x10 Q90m³/h H250m n1485 1/min P100kw HK150x5 Q163m³/h H325m n1485 1/min P210kw HK150x9 Q220m³/h H435m n1485 1/min P435kw HPXU150-200x5 Q150m³/h H665m n1485 1/min P415kw HK200x6 Q480m³/h H470m n1485 1/min P792kw HK200x4 Q500m³/h H265m n1485 ...
Rühle Tumbler MKR 300, Ruehle Hightech Tumbler with vacuum, incl. mixing and tumbling arm, container size 300 liters, Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device. You are very welcome to inspect the machine at our facility in Koblenz, Germany. If you have any questions, please do not hesitate to contact us.
Supports NOE 20-300 / NOE 20-350 , used Work economically, quickly and safely with robust Euro construction supports according to EN 1065 High load-bearing capacity Permissible column loads according to EN 1065 Long service life due to -Hot-dip / piece galvanizing -strong head and foot plate Low weight Wide adjustment range Protection against injuries caused by crushing protection 247 x Supports NOE 20-300, used, EUR 21,60 per piece 6 x stacking rack, galvanized, used, EUR 135,00 per piece 265 x Supports NOE 20-350, used, EUR 27,50 per piece 7 x stacking rack, galvanized, used, EUR 135,00 per piece Props NOE 20-300 / NOE 20-350 , used Work efficiently, safely and quickly using robust Europrops in accordance with EN 1065 High load capacity Allowable prop loads in accordance with EN 1065 Long service life through -Hot dip / discontinuous galvanising -Str ...
Bar max: 8 m3/h: 211 KW: 22 V / P / Hz: 400 / 3 / 50 min - 1: 3000 Kg: 465
We offer you used warehouse stage. Technical data of offered camp stage of Nedcon: It is possible to run a stock stage in the following composition: Possible column spacing: 4 m x 4 m, 5 m x 5 m. Height 3895 mm incl. gratings Höhne 3845 mm only with Sigma -Load capacity 300kg / sqm -Base plate which is made of non-slip plate, thickness of the base plate 40 mm -Project prepared according to customer needs. Price for bearing stage only on request available. Please contact us in connection. Price for 1 m² - â?¬70 NET / sqm plus Assembly Prices are net, plus statutory VAT. On request, we can arrange transport throughout Europe. After entering your postcode we will charge you the delivery charge We offer a professional fitting. Mistakes and intermediate sale is reserved! Offer valid until stock lasts. It's used goods. Before you ...
Bundle/Stream feeders Built in 2001; working condition
Fan Polytechnik L 300 Masch. No. 82261 Speed 1400 RPM Performance 7200 m3 / h Motor 380, 50 V, 7.5 kW Pressing 215 mm / WS Connection ø 300 mm H x W x d: 1080 x 950 / 1350 x 950 cm Weight 170 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Stock# U2415-1 Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.
Indramat Module TDM 3.2-030-300W1 Bosch Rexroth
CATALOG NO. 6985 TECHNICAL DATA - max width of the workpiece 300mm - height of the workpiece 200mm - unit: corrugated rubber roller + shoe + metal roller - working table 1230x440mm - belt 300x1900mm in advance: - rubber roller, sliding - aggregate about 7.5 kW - sliding roller, rubber from down: - pulling tape - pneumatic oscillation - 2 types of feed speed - feed motor 0.85 kW - diameter of the exhaust connection 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530 kg – unpainted – used grinder - very good condition Net price: PLN 13900 Net price: 3124EUR Net price calculated according to the exchange rate of 4.45 PLN/EUR (with larger exchange rate fluctuations, the price may change)
Indramat Module TDM 1.2-100-300-W1 Bosch Rexroth
Indramat module TVM 2.4-050-220/300-W1 Bosch Rexroth
Indramat AC servo drive module TDM 3.2-20-300-W0 Bosch Rexroth
Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm
This machine is particularly suitable for the processing of electrical waste with PVC and rubber. Diameter range 2 - 115 mm Cutting speed 35 meters per minute Weight 350 kg
Merkle Insquare 300 AC/DC welding system Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC Range: Open circuit voltage: 80 V Working voltage: 10-22.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A (40°C) Continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary Maximum current: 19 A TIG AC Range: Open circuit voltage: 80 V Working voltage: 10-22.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A (40°C) Continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary Maximum current: 19 A Electrode welding operation: Rod electrodes: 1.5-6 mm Open circuit voltage: 80 V Working voltage: 20-32.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A ...
length: 300 mm width: mm height: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Key data: 240 , 300 , 400
Emergency power system NSA as a backup power system with a nominal power of 300 kVA with Volvo Penta engine TAD 842 GE grid-parallel Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine Model: TAD 842 GE Engine No.: on request Engine power: 273 KW PRP | 299 KW LTP Cooling: Water-cooled Tempering: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 + Diesel B 7 Generator manufacturer: Stamford AvK Generator type: S4L1D-D Gene. No.: on request Generator power: 300 kVA Voltage: 400 / 231 volts Power factor: cos. - PHI 0.8 Speed: 1500 rpm Tank: Design: Base frame tank with drip pan Capacity / litre: 500 Dimensions of the power unit: Width approx. mm: 1.350 Height approx. mm: 2.370 Length approx. mm: 3.770 Weight approx. KG: 3.700 ...
maximum number of results exceeded
please refine your search
