300 kw to used for sale

General SKU262X271 LocationBarneveld MakeProminox TypeCuve Pressure Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume403 Ltr. Motor2.2 KW Specified Features - Processing vessel MaterialStainless steel 1.4435 (316L) Processing vessels Capacity403 l., (300 l.) Vessel sizesDia. 1000x900 l. ManholeDia. 204 mm OutletDN51 Motor2,2 kW, 230/400 volt, 1400 rpm Closed stirring vesselcheck Capacity403 l., (300 l.) Vessel sizesDia. 1000x900 l. Conical bottomcheck Dished top sidecheck ManholeDia. 204 mm Top connectionscheck OutletDN50 Half coil jacketedcheck volume 13,3 l. Max. temperature150°C With anchor stirrercheck with scraper With dissolver stirrercheck Motor2,2 kW, 230/400 volt, 1400 rpm Speed mixing shaft5,3/32 rpm Motor5,5 kW, 240/380 volt, 1460 rpm Information No.30430 Year of construction2000 Mounte ...

A semi-automatic NC tube bending machine Tracto-Technik is available. Tube diameter: 48mm, max. tube length: 3000mm, max. material thickness: 4mm, max. bending angle: 180°, max. bending radius: 125mm, bending accuracy: +/-0.2°, bending speed: 20°/s. Machine dimensions X/Y/Z: approx. 3900mm/800mm/1250mm, weight: approx. 700kg, control system: Siemens Simatic. Documentation available. On-site inspection is possible.

General SKU388X977 MakeZirbus TypeVTS 300 LocationBarneveld CEcheck Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface2 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface2 m2 Number of plates2x 9 Plate sizes500x450 mm Between the plates15 mm With condensercheck With cooling compressor2x MakeTecumsek TypeTFHT2511Z BR Cooling mediumR452a MaterialStainless steel 1.4571 (316Ti) Information No.2152 (typeplate on cooling instalation) Year of construction2006 With switchcheck Floorspace0,85x1,45 m Total height1,85 m Weight400 kg Extra SpecificationsWith vacuum pump, type D25B, cap. 25 m³/hFreeze dryersZirbusDryers > Freeze dryersBrand > Zirbus What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...

General SKU213X072 LocationBarneveld MakeHosokawa Nautamix NV Haarlem (NL) Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor1.5 KW Specified Features - Conical mixer Conical mixercheck Capacity300 l. Largest cone diameter1200 mm Cone height1600 mm Dished topcheck Top drivecheck Motor1,5 kW, 230/400 volt, 1459 rpm Motorca. 0,4 kW Cantilevered screwcheck With jacketcheck Bottom dischargeDia. 270 mm MaterialStainless steel 1.4301 (304) Information TypeDBX-300 No.M18123 With switchgearcheck Floor space1,40x1,40 m Total height2,40 m Weight800 kgConical mixersHosokawa NautaMixers > Conical mixersBrand > Hosokawa Nauta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

Hebrock edge banding machine AKV 3005 DK-F Year of manufacture 2004 Equipment and technical data: max. edge thickness 3 mm with preparation for alternating pools min./max. workpiece thickness 8-60 mm Feed speed approx. 10 m/min Readiness for operation approx. 5 min. min. workpiece length 190 mm min. workpiece width 80 mm Joining milling unit with 2 milling heads with PLC control Glue basin with contact roller Pressure zone Pruning shears Cross-cut saw Combination milling unit flush/chamfer/radius pneumatically adjustable 2- Milling station Corner Copy Unit Wing scraper, short version Radius scraper blade Spraying device Dimensions approx. 4700 x 1200 x 1530 mm Weight approx. 1150 kg

General SKU248T594 MakeMolteni LocationBarneveld TypeI 300 Main Features MaterialMild steel Volume250 Ltr. Motor7.5 KW Specified Features - Planetary mixer Planetary mixercheck Motorcheck 7.5 kW, 380 Volt (Ciem) With variable speed drivecheck Speed scraper1450-950 rpm With pancheck (2x) Capacity250 Ltr. Pan sizesdia. 700x680 mm MaterialStainless steel Information No.25-12 Year of construction1968 Floor space1,6x1 m Total height1,6 m Weight1500 kgPlanetary mixersMolteniMixers > Planetary mixersBrand > Molteni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

cutting diameter: 290 mm saw band length: 4000 x 27 x 0,9 mm table height: -- mm cutting width: 300 mm band speed: 20 - 100 m/min load centre: 290 mm rotary disc high: 290 x 300 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 280 x 240 mm height of the workpiece: 1800 x 1900 x 1750 mm weight of the machine ca.: 2200 kg - Fully automatic electro-hydraulic band saw - electric feed unit - max. feed 520 mm - front control panel - electro-hydraulic material clamping - semi-automatic & automatic mode selectable - Miter cuts - Automatic operation up to 45° right - Miter cuts - Semi-automatic operation up to 60° right - stepless adjustment of the saw blade speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: BMT 65 Equipment: - Chip conveyors - Parts catcher - Touchsetter - Programmable sub-spindle - Bar feeder prepared - One Touch IGF - 3-Jaw Power Chuck Kitagawa

Socad 300 x 8 mm (fixed angle) Capacity : 300 x 8 mm Fixed angle -- variable angle: fixed Electric motor (power): 7,5 HP Length : 1200 mm Depht : 900 mm Height: 1500 mm

CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of Make: 2007 Turning length: 1,000 mm Turning diameter: 340 mm Swivel diameter over bed: 530 mm Swivel diameter over slide: 410 mm Spindle bore 72 mm Speed: 45 – 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (driven) B-turret: 8 tool positions Equipment: Tailstock Transformer Touchsetter Chip conveyor OneTouch IGF

General SKU328W699 MakeAlexanderwerk LocationBarneveld CEcheck TypePGS-300 Main Features MaterialStainless steel Motor3 KW Specified Features - Sieve granulator Granulating sievecheck Rotor sizes⌀ 300 x 170 mm Sieve sizes⌀ 300 x 190 mm Sieve perforation⌀ 2 mm x 1, ⌀ 8 mm x 1 Inlet210 mm Outlet470 mm Motor3 kW, 230/400 V, 1400 rpm (EX) Speed124 rpm MaterialStainless steel 1.4306 (304L) Information No.941-0021 Year of construction2008 Floor space1.2x0.62 m Total height0.7 m Weight220 kg ATEX compatiblecheck Extra SpecificationsPerforation of extra seives: ⌀ 2 mm x1 ⌀ 8 mm x1 Sieve granulatorsAlexanderwerkSieves > Sieve granulatorsBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Ba ...

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3120 mm down holder: 14 Stück cutting angle: 1°5 no. of strokes: 14 Hub/min control: ENC 100 table width: 500 mm work height max.: 880 mm oil volume: 170 ltr. total power requirement: 11.0 KW weight: 5550 kg range L-W-H: 3750 x 1950 x 1650 mm Machine was used for ALU processing no heavy sheet metal processing good condition (!) new price ~ 32.000 Euro ---------------------------------------------------- Swing cut guillotine shear with fixed cutting angle with DURMA ENC 100 NC control unit manual cutting gap adjustment from the front ---------------------------------------------------- Equipment: - electro-hydraulic guillotine shears swing cut - with DURMA ENC 100 NC control unit Backgauge preselection - X axis Number of pieces (in automatic mode) Control panel, front left Re ...

Features Volume 15180 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3750 mm Height 2250 mm Diameter width 2600 mm Weight 1050 kg Material 2B=IIIC ground Surface outside 2B=IIIC ground Description Topsoil: Clapper bottom Downward-swept vent pipe DN 40 with threaded connection DN 50 according to DIN 11851 Threaded weld-on nozzle DN 40 with T-piece and airlock connection DN 50, thread according to DIN 11851 Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 430x320 mm Sample tap DN 15 Ladder hook at the top Downward-swept CIP cable DN 50 Clear drain with angled seat valve with flange with disc valve DN 50 Underbody: Clapper bottom Remaining drain with forward-drawn outlet surround with flange and angled seat valve DN 50 with sealing cap 4 calotte feet, height-adjustable,  ...

Plasma cutting machine Manufacturer: Swift Cut Type: Pro 3000 Year of Make: 2022 Travel paths X/Y: 3,000 x 1,500 mm Power Source: Hypertherm Powermax65 SYNC Sheet thickness mild steel max.: 16 mm Sheet thickness stainless steel (VA) max.: 12 mm Sheet thickness aluminium max.: 12 mm Table length: 3,000 mm Working width: 1,500 mm Table width: 1,500 mm

CNC lathe Okuma LB 3000 EX II-M C1000 Control: OSP-300L Year of Make: 2013 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: VDI 40 Equipment: - Chip conveyors - Touchsetter - OneTouch IGF - NC tailstock - 3-Jaw Power Chuck Forkardt 3QLC/K250

Manufacturer: Wuxi Model: MYJ-300TB Year of Manufacture: 2024 Find more here - / Contact us at -

A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible.

Offer 26028 Technical data: - Max. working width 3040 mm - Max. material thickness ST 37 4 mm - Bending process as fully automatic, or - Semi-automatic workflow can be pre-selected - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Max. lifting height of the upper beam 350 mm - Lifting height of the upper beam can be electronically preselected - Adjustability - bending beam 125 mm - The lower beam 125 mm - Upper bolster drive 400 V / 4.0 kW - Bending beam drive 400 V / 5.5 kW - E. footswitch - Space requirement approx. W 3950 x H 1600 x D 1200 mm - Weight approx. 4800 kg

Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling

pressure: 125 t chamfer lenght: 3000 mm distance between columns: 3100 mm Control: Delem DA 66S stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 15 kW weight of the machine ca.: 10.000 kg dimensions: 4080 x 3110 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3000 mm distance between columns: 3100 mm Control: Cybelec VisiTouch 24 stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 15 kW weight of the machine ca.: 11.500 kg dimensions: 4080 x 3110 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 t chamfer lenght: 3100 mm distance between columns: 2600 mm Control: Cybelec VisiTouch 24 throat: 500 mm dayligth: 500 mm stroke: 300 mm : 165 mm/s bending speed: 0 - 10 mm/s total power requirement: 32 kW weight of the machine ca.: 18.500 kg dimensions: 3900 x 1970 x 3520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 3000 mm gear width: 500 mm max. module: 25 / 40 spindle turning speed range: 250 U/min feed speeds: max. 4000 mm/min faceplate diameter: 2000 mm table bore diameter: 700 mm table turning speeds: 51 U/min power capacity - milling spindle: 53 kW drive motor for milling spindle: - kW axial adjustment: 1200 mm milling head swivable ca.: +/- 45 ° control: Siemens 840D total power requirement: - kW weight of the machine ca.: 55 t - CNC Control Siemens 840D - Internal Hob Head IFK - External Hob Head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dorit Vacuum Cooling Tumbler in very good condition CVM 300

Injection molding machine Krauss Maffei CX 650-3000 BJ 2009

CNC lathe Okuma LB 300- M Control: OSP-U100L Year of Make: 2000 Turning length: 1,000 mm Turning diameter: 430 mm Speed: 4,200 rpm Tool turret: 12 places (driven) Recording: VDI 40 Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck Tailstock Parts catcher Samsys 3000 Short Bar Loader (optional)

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Modified atmospheric packaging machine Type: A-300 Serial number: 9313-27 Seal bar length: 1450 mm Compressed air: 6 Bar, 28 l/min. Power: 240V, 1Ph, 50Hz, 10A Dimensions: 1200 x 1550 x 2100 mm With Leybold vacuumpump

This ACCUWAY UT-300LX2M Lathe machine was manufactured in the year 2016. It is equipped with a FANUC 0i-T Control Unit. It has a heat exchanger for electric cabinet and a lubrication system. The monitor (LCD) is 10.4 colored and dispose a three color warning light.

This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit.

This Mazak VTC 300 C Vertical machining centre was manufactured in the year 2004. It is equipped with a spindle and a chip conveyor. The machine is included with 30 tools.

This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information.

This lathe was manufactured in 2017. The DMG MORI WASINO G 100 | 300 features a maximum turning diameter of 285 mm and a standard diameter of 60 mm. It supports bar work up to 38.1 mm and offers rapid traverse rates of 12000 mm/min on the X-axis and 20000 mm/min on the Z-axis. With a spindle speed up to 6000 min⁻¹, this machine is ideal for efficient operations. For more information about this lathe, please reach out to us.

This 3-axis Zayer 30KF 3000 vertical machining center was manufactured in 1997. It offers robust construction and precision for complex machining tasks. Ideal for those seeking reliable performance in a used machine. Contact us for more information.

This Geminis GHT-4 720 x 3000 was manufactured in 1999. It features a maximum swing over bed of 720 mm and a distance between centres of 3000 mm. The main spindle supports a speed up to 1600 rpm with a power of 17/20.5 kW. It includes a Duplomatic turret with 8 tool positions and a longitudinal chip conveyor. Consider the opportunity to buy this Geminis GHT-4 720 x 3000 horizontal turning machine. Contact us for further details regarding this machine.

This Monforts TNC 300 SingleTurn was manufactured in 2009. A robust horizontal turning machine featuring a Fanuc 0i-TC control system, 10 tool stations, and a three-jaw power chuck Kitagawa 8. It includes a hydraulic hollow clamping device and a chip conveyor. Ideal for high-quality turning capabilities. Contact us for more information about this machine.

This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine.

This 4-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information.

This KEYENCE WM 3000 was manufactured in 2022. A reliable CMM machine, it offers precise dimensional measurement and quality control. Ideal for industries requiring high accuracy in component inspection. Contact us for more information about this machine.

This 3-axis IMA BIMA 310 120/300 CNC Wood Machining Centre was manufactured in 1999. If you are looking to get high-quality woodworking capabilities, consider the IMA BIMA 310 120/300 machine we have for sale. Contact us for more information.

This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information.

This 5-axis OMV Active Five 3000 was manufactured in 2008. It features a fixed table with a tilting head, Heidenhain TNC-530 control, and a travel range of 3000 x 1800 x 850 mm. The spindle operates at 22,000 rpm with a HSK63A taper and a 30-position tool changer. If you are looking to get high-quality milling capabilities, consider the OMV Active Five 3000 machine we have for sale. Contact us for more information.

This 3-axis Mazak VTC-300C vertical machining center was manufactured in 2005. It features a spindle speed range of 40 - 12,000 RPM and a robust table capable of handling loads up to 1400 KG. With dimensions allowing for significant movement (X: 1740 mm, Y: 760 mm, Z: 660 mm) and equipped with a 30-piece ATC, this machine is ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-300C machine we have for sale. Contact us for more information.

This 3-axis FAMUP COBO MM 3000 was manufactured in 2002. It features a working area of 3000 × 600 × 600 mm, spindle speed up to 15,000 rpm, and ISO 40 spindle taper. Equipped with a 30-position tool changer, high-pressure through-spindle coolant, a dividing wall for pendular jobs, and a chip conveyor. Consider the opportunity to buy this FAMUP COBO MM 3000 vertical machining centre. Contact us for more information.

This 5-axis Brother Speedio M 300 X3 vertical machining center was manufactured in 2024. It features a CNC-C00 control unit, with travel dimensions of 300 mm on the X-axis, 440 mm on the Y-axis, and 305 mm on the Z-axis. The machine supports a spindle speed of up to 16,000 min⁻¹ and a rapid traverse rate of 50 m/min. It has a tool storage capacity of 22 tools. Consider the opportunity to buy this Brother Speedio M 300 X3 vertical machining center. Contact us for more information.

This MicroStep Fiber MSF 3001.15L was manufactured in 2017. It features a 3m x 1.5m cutting table, 4kW IPG YLS laser source, and a HighYag cutting head for perpendicular cuts only. It includes Donaldson extraction and filtration equipment and automatic layout planning software for flat sheets. Consider the opportunity to buy this MicroStep Fiber MSF 3001.15L fiber laser cutting machine. Contact us for more information.

This Hollinger MSE-II-EP-SB-300-450 was manufactured in 1993. It is part of a comprehensive line that includes various welding and cutting machines, enhancing versatility and productivity in operations. Ideal for those looking to get high-quality welding capabilities, consider the Hollinger MSE-II-EP-SB-300-450 machine we have for sale. Contact us for more information about this machine.

Cam Automatic Baby Diaper, Sanitary Napkin, Dry Wipes, Wet wipes Packing Machine 300 Automatic wet wipes, dry wipes, Sanitary Napkin Packing Machine- 60ppm CAM-300 Automatic Baby Diaper, Wet wipes, Dry wipes, Sanitary Napkin Packing Machine wet wipes dry wipes pads food pads packing line Main Features ☆ Fully servo driven,Servo motor management by electronic CAM ☆ Modular structure design，Small floor area ☆ Force restrict protection, stable running ☆ Suitable for different direction packing Main component configuration ★ Motion control system：MITSUBISHI/SIEMENS ★ pneumatic：SMC ★ Guide rail, screw rod ： TBI 、TMI ★ Electrical accessories：Schneider Parameter Working speed UP to 600 pieces/min and 60 bags/min Number of pieces per row 10-20pieces/row General dimensions (LxWxH) 6295x1000x2277mm Weight 3522KG Electrical Power consum ...

This TRUMPF TRUPUNCH 3000 (S11) was manufactured in 2012. It features a Bosch Rexroth MTX CMP70 control, a maximum sheet format of 2,500 × 1,250 mm, and can handle sheet thicknesses up to 6.4 mm. The punching force reaches 180 kN, with a maximum workpiece weight of 160 kg. It includes a linear magazine with 20 stations and supports various roller tools. Consider the opportunity to buy this TRUMPF TRUPUNCH 3000 (S11) CNC punching machine. Contact us for more information.