129,264 used machines on RESALE, but how to find them? Machine Search
1 X ABB CAT TURBO CHARGER. RECONDITIONED FOR CAT 3516C & 3520C Gas engine CAT PART NO: 254-0789
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 8mm total power requirement: 15 kW weight of the machine ca.: 9,7 t dimensions of the machine ca.: 5310 x 1660 x 1590 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rotary vane vacuum pump oellubized Manufacturer: Leybold Type: Sogevac SV 300 B Cat No.: 960702 Status: Preliminary performance as goodas nominal power suction power: approx. 280 m3/h end pressure: approx. Gas ballast Special equipment: thermal switches, FKM seals Performance: 12 months Zubehoer: user manual, mineral filling delivery time: from stock; ready for use
Number of sanding units: 2 St. sanding width: 290 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 410 mm Length of the planing table: 2850 mm Number of knives: 4 (Tersa) St. Motor output: 5,5 kW loading dimensions L x W x H: 2950 x 1260 mm weight: 870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Leybold pump stand Consisting of: pump 1 Leybold Sogevac SV 300 (optionally with water cooling or air cooling) pump 2 Leybold Ruvac WAU 1001 H The individual pumps or the entire frame can be transferred. A service is 12 months in a general recovery. Several frames, versions available!; ready for use
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm total power requirement: 37 kW weight of the machine ca.: 20,5 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 10mm total power requirement: 15 kW weight of the machine ca.: 10,6 t dimensions of the machine ca.: 5310 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 77 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6000x5000x3500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rotary vane vacuum pump Manufacturer: Busch Type: R5 RA 302 D Voltage: 50/60Hz 400V Nominal suction digesters: 300m3/h End pressure: smaller 0.5hpa(mbar) Status: Generalueberholt Gewaehrleistung- 12 months Including: engine re-storage, repainting, electric check delivery time: from stock; ready for use
Cooling water pump for MWM 348 and 484 on an exchange basis
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 20mm total power requirement: 30 kW weight of the machine ca.: 18,3 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 6mm total power requirement: 11 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4880 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine type water circulation cooling unit Merkle brand Type WK 370 Plant No. 38.118 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 700 x 370 x 285 mm Weight 28 kg Age approx. 10 years Condition workshop tested very good Warranty 12 months from the date of delivery Original price 1.200,00 € + VAT Price 675,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our ...
Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 350th HELI The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessory portfolio ensu ...
The CE15 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-170 50Hz 170 bar 40 l/min. CE15-200 50Hz 200 bar 36 l/min. CE15-200 60Hz 200 bar 30 l/min. CE15-300 50Hz 300 bar 18 l/min. CE15-300 60Hz 300 bar 22 l/min. General Specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.
Rotary vane vacuum pump Manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60Hz 400V nominal suction digesters: 300m3/h End pressure: 0.5hpa(mbar) Status: Generalueberholt Gewaehrleistung- 12 months Including: engine re-storage, repainting, electric check delivery time: from stock; ready for use
The CE100 series is an electrically driven high-pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE100-300-135 CE100-500-80 CE100-1000-42 CE100-1400-28 CE100-2050-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 75 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 1800 mm x 1050 mm x 1400 mm Weight: 2000 kg Includes standard accessories.
New SGB transformers 1000KVA power voltage: 10/20kv - 690V SWITCHABLE other services and voltages also available easy questions! SEE photos was still never used available now 6 PCs of nationwide cheaper delivery issues is always available: Mr Serhan 01727265324 or e-mail: Transformatoren@gmx
Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; "ready for operation"
Electrically heated furnaces with conveyor belt (for non-explosive substances) TECHNICAL DATA temperature max.: 420°C working temperature: approx. 350°C total power consumption: 60 kVA heating power: 48 kW drive: 0,55 kW air circulators: 2 x 4 kW number of control groups: 2 external dimensions (approx.): length: 8500 mm width: 1800 mm height: 2625 mm useable dimensions: conveyor belt width: 900 mm clear height: 150 mm heated length: approx. 7200 mm
The CE150 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Drive motor power: 90 kW (50Hz) / 110 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.
Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg
The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General Specifications: ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.
GEA-CFS” fryer Type BRN 3000/500 all stainless steel electrically heated 84 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control teflon-infeed extra infeed conveyor 5 mm extra outfeed conveyor 5 mm oil circulation pump filter sediment removal system electrical hoists fire protection total length ± 6.650 mm total width ± 1.500 mm total height ± 3.200 mm
The CD160 series of our high-pressure machines covers a pressure of 200 to 2500bar and a volume flow of 25 to 300 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine with turbocharging and charge air cooling. The entire frame is made of hot-dip galvanized steel, which ensures long durability and corrosion resistance. For the beautiful look, the frame is primed and then painted. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet, forklift pockets and, at all four corners, with lifting eyelets. The machine has a galvanized roof plate with a side bracket for the protection and storage of, for example, high-pressure hoses. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD160-200 200 bar 300 Lpm CD160-250 250 bar 250 Lpm CD160-1000 1000 ...
with gas burners Weishaupt new glass wool new stainless steel sheets New storage engine Power Max 465 kW the boiler is uberholte with gas burner Weishaupt with new glass wool new grid grate Engine re-stored Power Max 465 kW the boiler is overhauled
Technical data for the pallet rack traverse: Shelving system: Stow Type: Pal Rack OP Included in delivery are: 01x pallet rack traverse, used Material color: blue Box profile: 110 x 50 mm Clear width: 1,300 mm load per pair of trusses 2,000 kg, with the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.
RECON Part number: 0206 9704 Cast: 0206 9703 Engine 3 with new bushings ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Double grinding buck Rema with cue equipment, large collecting tray, new condition. Grinding wheel diameter 300mm, 1.8kw Special price
FOR SALE ALFA LAVAL MMB 305S-11 TO WHOM IT MAY CONCERN; WE VE USED ALFA LAVAL MMB 305S-11 SEPARATOR AT OUR STOCK IT IS IN GOOD RUNNING CONDAT?ON . IT WHAS USED AS GAS OIL SEPARATOR PLS FIND SPECIFICATION BELOW. MODEL MMB 305S-11 YOB & SERIAL No. 2008 / 4170832 BOWL NO. 548715-01 CURRENCY 60 Hz MADE IN SWEEDEN READY TO TRANSPORT. IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY
Dynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...
Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) - potential energy: 300 Joule - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items ; new
DYNAJET 500me HELI - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the innovative and compact me-Class! The DYNAJET 500me with up to 500 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - 1-axle chassis with pneumatic tyres for easy manoeuvring on site - Flexibility and support due to perfect center of gravity - High durability due to screw connections made of stainless material - Splash water resistant (IP54) control cabinet for versatile and sm ...
Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...
A C H T U N G_____S o n d e r p r e i s ! ! ! TIG Welding Device Manufacturer Artec fully ready for use with all the no-fable lifts. Can also be used as an electrode device. Welding current 350 ampere DC, no alternating current! Weight approx. 200kg Geraet under electricity ready for use Immediately available Lorch Dalex Messergrießheim Cloos Special price
Mueller Martini 351.0412 unwinding station Built in 2000; working condition
We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 800 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.
Charging for forklift trucks with traction battery 80 volts Type Tebetron-E 50/80 Power connection 380Volt Power 80 Volt 50 Ampere Connection to the battery Rema 160A (see picture), other plugs available. Digitally monitored charging for saeure batteries e.g. 5PZS750 Mass approx. Height 110cm Width 55cm Depth 40cm Weight 80kg Ready to use Special price
Built 2001 Format: min 140 x 100 mm max 480 x 320 mm Equipment o 3 rod feeder 3738; ready for use
We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.
Turning- and Distibution Built in: 2000; working condition
We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 800 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.
Nordson 3100-2AA32; State as is; only checked for function; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.
Type V-380 Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video abcs://youtu.be/xZFPl9-vHtg
Built in: 1999-2004 100x print roll holder available; working condition
maximum number of results exceeded
please refine your search
