2000 kw used for sale

material width:350 mm coil weight:2,0 t coil internal diameter:470 - 530 mm coil external diameter:1500 mm power requirement:1,0 kW weight:1,5 t dimensions (WxDxH):1,3 x 1,6 x 1,9 m

• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 145 mm • Centre distances infeed belt/weighing belt/outfeed belt 370/270/470 mm • Bad ejection through pneumatic pusher • Without printer • Non calibratable • Drive 230V/50/60Hz

Folding machine good condition, ready for immediate use. For details, please refer to the nameplate

Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg

Offer 24191 Specifications: - Welding current max 250 A 30% ED - 180 A 60% ED - 140 A 100% ED - Welding current adjustable in 8 stages - 30 A / 15 V - 300 A / 30 V - 4 roller wire feeders infinitely adjustable - 2 stroke + 4 stroke regulation - Weld seam lengths - time setting - Hosepack air-cooled approx. 3 m - Ground cable -Reducer - Connection 400 V - Space requirement approx. W 550 x H 1090 x D 950 mm - Weight approx. 140 kg

Dear Ladies and Gentlemen, We have the following Oil Transformers in stock Description: Type : Oil Transformer Finish : Hermetic Make :P AUWELS Year of construction : 2001 Condition : Used Inspected Rated power : 2000 KVA Medium voltage : 20 KV + 4 x 2.5 % Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Dimension Length 205 cm Width 114 cm Height 205 cm Weight 5290 KG Other powers and voltages also available from 100 KVA to 5000 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available for further questions Mon to Sat 8 a.m. to 10 p.m.

sheet width - max.: 0350 mm coil weight: 2,00 t coil internal dia.: 470 - 530 mm coil outside - diam. ca.: 1500 mm total power requirement: 1,0 kW weight of the machine ca.: 1,50 t dimensions of the machine ca.: 1,30 x 1,6 x 1,90 m motor-driven, with manual central spreading The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PKC/ 2000 Steam peeler for vegetables with steam buffer used, sold as it is, where it is, price ex location

Offer 24194 Specifications: - Max. working width 2040 mm - Max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 85 mm - Max. adjustment bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Type of mixer Height 1700 mm Width 1300 mm Length 3500 mm Capacity 2000 l Power supply: 400V 50Hz 3N Total power 18 kW Main Material Stainless steel, acid-resistant Agitator Type Vane Agitators Product ejection Pneumatic bottom flaps, product ejection from below Loading No loading, it is possible to buy a pillar loading for the machine Mixer Type Open Mixer Number of rollers Twin shaft

MINOX E-Tumbler Screening Machine --> New Machine from Customer Order for Illustration: -2-decker, screening in 3 fractions -2x ball knock cleaning -Lifting device -Safety clamping screws -Sieves of your choice; Fabric : areas in contact with the product in stainless steel 1.4301 (Aisi 304) 2-deck machine : 2.6m² / deck Drive : 4 KW

MDR 2000 Rheometer Manuf.: Alpha Model 81001 220V 5amps Power 1000 VA Air pressure required PSI 120 max. / 70 min.

table length: 4000 mm table width: 2000 mm : 28 mm table height: 815 mm : kg weight of the machine ca.: 1,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mori Seiki NL 2000 SY 500 MOTORIZED LATHE :::TECHNICAL SPECIFICATIONS::: CNC Model: Mori Seiki CNC Version: MSX 850 Main spindle nose: ASA 6 Main spindle power: 15Kw Main spindle bar passage: 65mm Turning diameter: 275mm Turning length: 510mm Number of main spindle speeds: 5000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm Y-axis travel first turret: +- 50mm Z-axis travel first turret: 590mm Fast feeds linear axes X Y Z: X 30 / Y 10 / Z 30m/min Sub-spindle: yes Spindle nose: ASA 5 Number of counter-spindle speeds: 6000 Counter spindle power: 7.5Kw Bar Passage: 43mm Z stroke sub-spindle : 625mm Model and brand bar loader: Iemca Master 880 MP-E Chip conveyor: belt Presetting: yes Machine equipment: Extensive machi ...

Used fully automatic labeling machine made by KHS Innoket model SE 2000. New 2007. Wet and hot glue labeling capability. Automatic film roll change at each RF station; automatic paper label magazines. Machine speed for RF (hot glue) - max 45,000 butts/hour. Machine speed for paper labels - max 45,000 butts/hr. Machine equipped with 2 stations for paper labels, 2 stations for film labels; 40 plates.

Can filler Simonazzi Sasib Starcans 2000 with Ferrum can seamer F708, year of manufacture 2002, filler with 80 valves Can Filler Simonazzi Sasib Starcans 2000 with Ferrum Can Seamer F708, Year: 2002, Filler with 80 valves.

Key data: 80 mm, 1500 mm, 380 V

For sale; Samsys bar loading magazine type Multisam 2000. The bar loading magazine is in good condition and can still be viewed under power. The maximum bar diameter is approx. 80 mm. The maximum rod length is 1500 mm. Including cable with Harting plug. For more information mailto chrismachinematch.nl

Fiber Laser Welding Machine with 2000 Watt Laser Power - Top device at a top price from our exhibition - approx. 20 operating hours - 2kW laser source from MaxPhotonik - German menu navigation - Universal device for welding/cutting/cleaning - Incl. 4-roll welding wire feeder - Integrated water cooling -at call Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg ---------------------------------------------------------------------- -------------------------------------------------- #Lasermarkieren #Lasergravur #Laserschneiden #Wasserstrahlschneiden #Laserbeschriftung #Gravur #Geschenk #Glasgravur #Werbeartikel #Holzgravur #Geschenkidee #Typenschilder #Alugravur #Ledergravur #Glasschneiden #Pulverbeschichten #Pulverlack #Entlacken #Laserentlackung #Laserreinigung #Laserstrahlreinigung #Lasern #Gewindeschneiden #Abkanten #Kanten ...

Height 2200 mm Width 1400 mm Length 2800 mm Weight approx. 1300 kg Capacity 2000 l Power supply: 400V 50Hz 3N Total power 5.1 kW Main Material Stainless steel, acid-resistant Order processing time available in stock Barrel Aeration Valve Yes, Manual Valve Driver type Mikster MCM 023 Variable speed control of the tumbler Smooth adjustment of the barrel speed Tumbler with cooling jacket No Load approx. 1400 kg

STORK LASER SCREEN ENGRAVING EQUIPMENT ( ROTARY TEXTILE PRINTING ) LASER ENGRAVER MAKE : STORK TYPE : STK-2000 YOC : 1988, RENEWED / MAJOR OVERHAUL 2012 LENGTH : 310 CM WITH END RING GLUING UNIT TYPE : STORK SCR-85 LACQUER COATER : TYPE : STORK RSE 3100, Q4B1/2000 YOC : 2000 2 DRYING UNITS SCREEN INSPECTION & WASHING EQUIPMENT COOLING SYSTEM SOFTWARE & HARDWARE FOR ENGRAVER PIPING, DUCTING, CABLING ETC ONE LOT OF SMALL EQUIPMENT USEFUL FOR SCREEN PRODUCTION

Inv. Num. : 7825 Type: OPTIturn D560 x 2000 Producer: OPTIMUM Created: 2011 Parameters: Maximum turning diameter over bed: 560 mm Maximum turning diameter over support: 355 mm Maximum spindle speed: 1500 1/min Maximum workpiece weight: 500 kg Clamping diameter (sub-spindle): 315 mm Motor power: 7.5 kW Length: 3340 mm Width: 1150 mm Height: 1430 mm Weight: 2720 kg

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

Dionex ICS 2000 Ion Chromatograph

Pulse laser cleaning device with 200 watt laser power much more effective in cleaning/rust removal applications than continuous lasers, such as those used in welding lasers. Take a look and test it now Top device at a top price from our showroom for paint stripping, rust removal, VA weld seam cleaning, etc. 200 Watt Pulse Laser / Air-Cooled German menu navigation at call Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 100kg

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band Width:20mm

All stainless steel Hopper capacity: 2000 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 18 KW Installation dimensions of machines in cm: Width: 193 Length: 227 Height: 215

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

The US-2000 AB with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

Tetra Pak Hoyer Model : FF 2000 Used for : Ice cream Fruit Feeder Y.o.m : 2003 Condition : Very Good

Manufacturer: ETSCHEID Content: 2000 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit very good condition, fully functional

The Colchester Combi 2000 has been overhauled and is in very good condition. Spindle motor power: 7,500 W Year of Make: 1998

Inv. Num. : 7935 Type: Trumatic 2000 R Producer: Trumpf Created: 2003 Parameters: Compressive force: 18 t Maximum length of sheet metal plate: 2070 mm Maximum blade width: 1270 mm Maximum sheet metal plate weight: 75 kg Max. sheet thickness: 6.4 mm Maximum punching speed: 900 1/min Machine height: 2070 mm Machine length: 6000 mm Machine width: 5600 mm Machine weight: 8000 kg

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2000 liters Machine dimensions in cm: Length: 270 Width: 154 Height: 222 Electric power: 6.5 kW

OKS Stationary Air Pressure Vessel Galvanized 1 piece 2000 liters 1 piece 1000 liters Test pressure 16 bar, operating pressure max. 11 bar at call Tel. 01715213204

turning diameter: 570 mm turning length: 2000 mm control: Sinumerik 805 Siemens swing diameter over face slide: 365 mm main spindle speeds:: 3-2.500 U/min drive of main spindle: 15/19 kW spindle bore: 62 mm spindle head: DIN 55027 No.8 tailstock taper MT: 5 quill stroke: 190 mm pinole diameter: 80 mm feed range - long. and cross: 0,01-50 mm/u total power requirement: 50 KVA weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 80 t, 2000 mm

Inv. Num. : 7022 Type: PPEB-EQ 80/2000 Producer: LVD Created: 2008 Parameters: Control system: CADMAN CNC Compressive force: 80 t Maximum bending length: 2000 mm Stroke: 200 mm Distance between the frame walls: 1500 mm Maximum lifting speed: 130 mm/s Maximum bending speed: 11 mm/s Maximum retraction speed: 115 mm/s Total power requirement: 12.5 kW Main motor power: 7.5 kW

The US-2000 LB with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

Used vacuum tumbler by Nowicki model MA-5-2000 PS. The device will be perfect for meat processing plant for massifying and tenderising meat. Model: MA - 5- 2000 PS Power: 4,1 KW Weight: 1190 kg Capacity: 2000 litres Intake: 1200 kg Bowl speed: 0 - 9 / minute Length: 2860 cm Width: 1335 cm Height: 1670 cm

Complete with intelligent random in feed system. As new condition

B&A REF: 8759 TON: 200 SHOT WEIGHT: 297 SCREW DIAMETER: 50MM STROKE VOLUME: 353CM3 INJECTION PRESSURE: 2050AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC

with Robot WITTMANN W713-0114 - Screw diameter: 55 mm - Clamping force: 200 kN - Injection volume: 427 cm? - Mould opening stroke max: 650 mm - Platen size (h x v): 715 x 715 mm - Distance between tie-bars (h x v): 520 x 520 mm - Operating hours: 24.453 - Power: installed max: 15 + 30 kW - Dimensions (long x wide x high): 6.000 x 1.500 x 2.400 mm - Weight: 6.500 kg - Weight: 6.630 kg

- Ultra-Sonic banding machine - Standard with the existing accessories

Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Year 2009 - Serial-No. BTA 734 V5A96330 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Year 2011 - Serial-No. BTA 734/3 V5B16897 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1-Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press TOKO 2000 Serial-Nr. 100722 Druckgeschwindigkeit / Production 10.000 Sheets/hr Elektrischer Anschluss / Power supply: 230V / 50Hz / 3,7A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Screw diameter; 55mm Injectable volume: 427 cm3 Injection pressure: 1720 bar Passage between columns: 570 x 570 mm Minimum mould thickness: 250 mm max: 750 mm Opening stroke: 600 mm Cores: 2 Robot interface: NO Options: Electrical dosing motor

Key data: 1500 mm, 220 mm, 1700 mm

1 pc. used crankshafts & camshafts - cylindrical grinding machine Make BERCO Model LYNX 2000 Year of construction 2013 Specifications Max. grinding diameter for recirculating grinding 220 mm Max. grinding diameter for cylindrical grinding 300 mm Max. workpiece weight between the tips 150 kg Center height above table 270 mm Center width 1700 mm Max. sanding length 1300 mm Diameter of the chucks 180 mm Tailstock quill path 50 mm Max. grinding wheel diameter 660 mm Min./Max. Grinding Wheel Width 20/80 mm Max. circumferential speed 35/80 m/sec. Grinding spindle head (X-axis) Final drive with linear motor - travel 490 mm Measuring device optical scale resolution 0.0001 mm Workpiece head (C-axis) Workpiece spindle speed range 1 - 1000 rpm. Encoder Measurement Range - Resolution 0.0001 degrees Table (Z-axis) Final drive with linear motor Measuring device optica ...

Key data: 2000 , 678 , 60

Screw diameter; 60 mm Injectable volume / Shot volume: 678 cm3 Injection pressure: 2000 bar Column Passage /Bettween tie bar: 570 x 570 mm Mould tickness thickness: 250 mm max: 550 mm Opening stroke: 450 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options: 12 Zones chauffe - 12 heating way

The deep hole drilling machine is in very good condition! Deep hole drilling machine type TBM 120-2000 BTA drilling system Drilling range full drilling 30-130 mm Max. boring 200 mm B8Uwbfcphz Max. drilling depth 2000 mm Drilling spindle box with two-stage gearbox electr. Switchable. Optionally rotating / standing tool Main spindle box ( tailstock ) with two-stage gearbox electr. switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydr. Cheek chuck We will be happy to send you more pictures on request. We also see ourselves as a competent partner in the field of deep hole drilling in contract work. We would be happy to make you an offer!