2000 kva used for sale

-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions 2000/1800/H810 mm -Weight: 117 kg

Type of mixer Height 1700 mm Width 1300 mm Length 3500 mm Capacity 2000 l Power supply: 400V 50Hz 3N Total power 18 kW Main Material Stainless steel, acid-resistant Agitator Type Vane Agitators Product ejection Pneumatic bottom flaps, product ejection from below Loading No loading, it is possible to buy a pillar loading for the machine Mixer Type Open Mixer Number of rollers Twin shaft

-Stainless steel work table -Design: stable -Base floor: 1 -border -filing -Dimensions: 2000/930/H930 mm -Weight: 82 kg

-Stainless steel work table -Design: stable -Base floor: 1 -border -filing -Dimensions: 2000/930/H800 mm -Weight: 82 kg

-Stainless steel work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 120 kg

MINOX E-Tumbler Screening Machine --> New Machine from Customer Order for Illustration: -2-decker, screening in 3 fractions -2x ball knock cleaning -Lifting device -Safety clamping screws -Sieves of your choice; Fabric : areas in contact with the product in stainless steel 1.4301 (Aisi 304) 2-deck machine : 2.6m² / deck Drive : 4 KW

PKC/ 2000 Steam peeler for vegetables with steam buffer used, sold as it is, where it is, price ex location

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 2000 mm -Depth: 800 mm -Height: 890 mm -Weight: 145 kg

Roller conveyor, conveyor belt, roller track -Roller width: 400 mm -Conveyor length: 2000 mm -Roller diameter: 50 mm -Central spacing: 100 mm -Height: 300 mm -driven: via flat belt -without: flat belts -Dimensions: 2000/520/H300 mm -Weight: 90 kg

table length: 4000 mm table width: 2000 mm : 28 mm table height: 815 mm : kg weight of the machine ca.: 1,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MDR 2000 Rheometer Manuf.: Alpha Model 81001 220V 5amps Power 1000 VA Air pressure required PSI 120 max. / 70 min.

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 12 mm -Prisms: 90° 10 mm -Tool: not shared -Tool dimensions: 30 x 90 mm -Tool total length: 2000 mm -Rail length: 2500 mm -Weight: 83 kg

Used fully automatic labeling machine made by KHS Innoket model SE 2000. New 2007. Wet and hot glue labeling capability. Automatic film roll change at each RF station; automatic paper label magazines. Machine speed for RF (hot glue) - max 45,000 butts/hour. Machine speed for paper labels - max 45,000 butts/hr. Machine equipped with 2 stations for paper labels, 2 stations for film labels; 40 plates.

Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Depth: 500 mm -Height: 2000 mm -Number: 4x stands -Price: complete -without: crossbeams -Weight: 50 kg

Fiber Laser Welding Machine with 2000 Watt Laser Power - Top device at a top price from our exhibition - approx. 20 operating hours - 2kW laser source from MaxPhotonik - German menu navigation - Universal device for welding/cutting/cleaning - Incl. 4-roll welding wire feeder - Integrated water cooling -at call Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg ---------------------------------------------------------------------- -------------------------------------------------- #Lasermarkieren #Lasergravur #Laserschneiden #Wasserstrahlschneiden #Laserbeschriftung #Gravur #Geschenk #Glasgravur #Werbeartikel #Holzgravur #Geschenkidee #Typenschilder #Alugravur #Ledergravur #Glasschneiden #Pulverbeschichten #Pulverlack #Entlacken #Laserentlackung #Laserreinigung #Laserstrahlreinigung #Lasern #Gewindeschneiden #Abkanten #Kanten ...

Height 2200 mm Width 1400 mm Length 2800 mm Weight approx. 1300 kg Capacity 2000 l Power supply: 400V 50Hz 3N Total power 5.1 kW Main Material Stainless steel, acid-resistant Order processing time available in stock Barrel Aeration Valve Yes, Manual Valve Driver type Mikster MCM 023 Variable speed control of the tumbler Smooth adjustment of the barrel speed Tumbler with cooling jacket No Load approx. 1400 kg

STORK LASER SCREEN ENGRAVING EQUIPMENT ( ROTARY TEXTILE PRINTING ) LASER ENGRAVER MAKE : STORK TYPE : STK-2000 YOC : 1988, RENEWED / MAJOR OVERHAUL 2012 LENGTH : 310 CM WITH END RING GLUING UNIT TYPE : STORK SCR-85 LACQUER COATER : TYPE : STORK RSE 3100, Q4B1/2000 YOC : 2000 2 DRYING UNITS SCREEN INSPECTION & WASHING EQUIPMENT COOLING SYSTEM SOFTWARE & HARDWARE FOR ENGRAVER PIPING, DUCTING, CABLING ETC ONE LOT OF SMALL EQUIPMENT USEFUL FOR SCREEN PRODUCTION

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5500x1400x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L, built 2026 --------------------------------- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beam ...

Dionex ICS 2000 Ion Chromatograph

DMG MORI NRX 2000™ CNC Lathe TECHNICAL FEATURES: Year: 2017 NC Type: MITSUBISHI M730UM Maximum diameter Machinable: 150 [mm] X-axis travel: 100 [mm] Z-axis travel: 220 [mm] X1 Axis Fast Feed Speed: 30000 [mm/min] Fast feed speed X2 axis: 30000 [mm/min] Z1 axis fast feed speed: 30000 [mm/min] Z2 axis fast feed speed: 30000 [mm/min] Spindle Nose: JIS A2-5 Maximum length Machinable Spindle 1: 100 [mm] Maximum length Machinable Spindle 2: 100 [mm] Maximum speed Spindle 1: 6000 [rpm] Maximum speed Spindle 2: 6000 [RPM] Turret Turning Tool Power 1: 1.5 [kW] Turret 2 rotating tool power: 1.2 [kW] Number of posts - Turret 1 : 10 Maximum speed Rotating Tools - Turret 1: 10000 [RPM] Number of posts - Turret 2: 10 Maximum speed Rotating Tools - Turret 2: 10000 [RPM] Installed power: 38 [kVA] Supply voltage: 400 [V] Working time: 12270 [h] Weight: 5700 [Kg] EQUIPMEN ...

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

Tetra Pak Hoyer Model : FF 2000 Used for : Ice cream Fruit Feeder Y.o.m : 2003 Condition : Very Good

Water treatment plant Manufacturer: BWT Type Osmotron 2000-PH-S System was overhauled in 2020, new control cabinet from 2021 Year of construction 2000 BWT Osmotron water treatment plant of BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production 1 piece of water treatment plant BWT Osmotron Plant of the company BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production, incl. • 90μm pre-filter with automatic backwash • Softening system in series operation (without hardening slip) and for 600 litre salt-plastic tank for regeneration • Heyl Testomat 2000 • 2 chlorine cells to reduce germs in the softeners • Reverse osmosis modules for 2000l/h • 4x SM20 EDI modules (electro-deionization modules) • Conductivity meter for permeate (after reverse osmosis module) Mettler Toledo • Conductivity meter for diluate (according to EDI modules) THORNTON 200C ...

Pulse laser cleaning device with 200 watt laser power much more effective in cleaning/rust removal applications than continuous lasers, such as those used in welding lasers. Take a look and test it now Top device at a top price from our showroom for paint stripping, rust removal, VA weld seam cleaning, etc. 200 Watt Pulse Laser / Air-Cooled German menu navigation at call Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 100kg

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm -Weight: 3500 kg

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band Width:20mm

All stainless steel Hopper capacity: 2000 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 18 KW Installation dimensions of machines in cm: Width: 193 Length: 227 Height: 215

Manufacturer: ETSCHEID Content: 2000 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit very good condition, fully functional

Pallet wrapper, Youngsunpack – used - : Price from location: only 3.950.-€ (net)! Device1 Manufacturer: Youngsunpack Type: MH-FG 2000 B Year of manufacture: 2018 SN: e.g.: 181010PW4- Pre-stretching system with an elongation rate of 250% Machine weight: 750kg Available programs: Single winding, Rewinding and unwinding, Single winding with cover sheet, Rewinding and unwinding with cover sheet, Manual Foil trolley output: Fixed pre-stretching of 250%. Max Load: 2000kg Maximum pallet dimensions: 1200 x 1200mm Diameter of wrapping surface: 1650mm Maximum winding height: 2400mm Column height: approx. 2.75m 220V, 1 phase, 1,250W, Condition: good Available: from approx. Q4/2026 Location: Hamburg

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

TASKI Swingobot 2000 Autonomous Scrubber Dryer Manufacturer: TASKI / Diversey Model: Swingobot 2000 Type: COR2000 Machine Type: Autonomous Scrubber Dryer Condition: used, fully operational Operating hours: approx. 38 h Serial Number: 7524396000434 Operating voltage: 24 V DC Power consumption: 1500 W Net weight: 471 kg Working width: 700 mm Suction bar width: 900 mm Fresh water tank: 90 l Runtime: up to 4 hours Theoretical area output: up to 1,260 m²/h Degree of protection: IPX3 Operation: autonomous or manual Navigation system: LIDAR and sensor system Touchscreen control panel Emergency stop switch Location: Teningen-Nimburg

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

KUKA KR 210 L150-2 2000 6-axis robot The KUKA KR 210 L150-2 2000 (2000 series) is a powerful 6-axis industrial robot that has been specially designed for an extended reach with a high payload. The abbreviation "L150" signals the arm extension (long version), which raises the maximum reach to 3,100 mm, while the nominal payload is 150 kg. Main technical data Maximum reach: 3,100 mm Nominal load capacity: 150 kg Additional load (arm/swingarm): 50 kg / 100 kg Number of axes: 6 Repeatability: ± 0.06 mm Net weight (without steering): approx. 1,285 kg Degree of protection: IP65 (standard) Mounting Position: Floor Axis data (range of motion & speed) The 2000 series is characterized by high-torque drives that ensure high dynamics despite the large arm extension: Axis 1 (A1): ±185° | Max. speed: 86°/s Axis 2 (A2): +90° to -61° | Max. speed: 84°/s Axis 3 (A3): + ...

3-speed 380V, 2-stage motor, runs smoothly! Forward and reverse rotation. Geared spindle drive, gears run in oil. 16 spindle speeds adjustable from 40 to 2000 RPM. Automatic feed in longitudinal and cross directions. Norton gearbox for easy thread cutting, change gears included. MT3 tailstock taper. Coolant pump. Foot brakes. Splash guard. Chuck safety guard. Quick-change tool post with 3 holders. D1-3 Camlock main spindle taper. Made in Great Britain! Includes accessories as shown in the pictures. Center distance: 750 mm Center height: 165 mm Spindle bore: 33 mm Overall dimensions: 160 x 80 x 130 cm Shipping available throughout Europe!

The US-2000 AB with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

Variant 2: Professional advertisement text for RESALE (German) Title: EGLI Stainless Steel Butter Churn / Butter Maker – 2,000L with Integrated Butter Silo Description: For sale is a highly professional industrial butter churn from the Swiss quality manufacturer EGLI with a total volume of 2,000 liters. The stainless steel butter silo integrated directly underneath is fully included in the scope of delivery. The entire facility is in an excellent, fully functional condition (good running condition). Highlights & Technical Equipment: Hygienic design: The entire plant, the silo and the entire associated piping system are made of first-class, food-safe stainless steel. State-of-the-art control: Separate floor-standing control cabinet made of stainless steel. Operation is fully automatic via a Siemens SIMATIC Multi Panel touch display with fully graphical process visualizatio ...

Inv. Num. : 7935 Type: Trumatic 2000 R Producer: Trumpf Created: 2003 Parameters: Compressive force: 18 t Maximum length of sheet metal plate: 2070 mm Maximum blade width: 1270 mm Maximum sheet metal plate weight: 75 kg Max. sheet thickness: 6.4 mm Maximum punching speed: 900 1/min Machine height: 2070 mm Machine length: 6000 mm Machine width: 5600 mm Machine weight: 8000 kg

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2000 liters Machine dimensions in cm: Length: 270 Width: 154 Height: 222 Electric power: 6.5 kW

The Colchester Combi 2000 has been overhauled and is in very good condition. Spindle motor power: 7,500 W Year of Make: 1998

Robot KUKA KR 240 L210-2 2000 Serial number 912406 industrial robot including control cabinet 60498 The KUKA KR 240 L210-2 robot is an {axis} axis robotic arm, it has a payload of 210 kg and a reach of 2900 mm. Manufacturing applications include additive manufacturing. Common applications of KUKA KR 240 L210-2 include: additive manufacturing, assembly, dispensing, finishing, material handling, palletizing, remote TCP. Specifications Manufacturer: KUKA Type designation: KR 240 L210-2 2000 Type: Robotic Arm Axes: 6 Payload: 210kg Reach: 2900 mm Repeatability: 0.06 mm Weight: 1277 kg Serial Number: 912406 Control cabinet: 60498 Year of manufacture: 06/2008 Used goods – normal signs of use present. Further details, article numbers and pictures on request. Two weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stoc ...

Key data: 80 t, 2000 mm

Inv. Num. : 7022 Type: PPEB-EQ 80/2000 Producer: LVD Created: 2008 Parameters: Control system: CADMAN CNC Compressive force: 80 t Maximum bending length: 2000 mm Stroke: 200 mm Distance between the frame walls: 1500 mm Maximum lifting speed: 130 mm/s Maximum bending speed: 11 mm/s Maximum retraction speed: 115 mm/s Total power requirement: 12.5 kW Main motor power: 7.5 kW

Robot KUKA KR 240 L210-2 2000 Serial number 913923 industrial robot including control cabinet 60255 The KUKA KR 240 L210-2 robot is an {axis} axis robotic arm, it has a payload of 210 kg and a reach of 2900 mm. Manufacturing applications include additive manufacturing. Common applications of KUKA KR 240 L210-2 include: additive manufacturing, assembly, dispensing, finishing, material handling, palletizing, remote TCP. Specifications Manufacturer: KUKA Type designation: KR 240 L210-2 2000 Type: Robotic Arm Axes: 6 Payload: 210kg Reach: 2900 mm Repeatability: 0.06 mm Weight: 1277 kg Serial Number: 913932 Control cabinet: 60255 Year of manufacture: 10/2008 Used goods – normal signs of use present. Further details, article numbers and pictures on request. Two weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stoc ...

The US-2000 LB with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

Robot KUKA KR 240 L210-2 2000 Serial number 910437 industrial robot including control cabinet 56178 The KUKA KR 240 L210-2 robot is an {axis} axis robotic arm, it has a payload of 210 kg and a reach of 2900 mm. Manufacturing applications include additive manufacturing. Common applications of KUKA KR 240 L210-2 include: additive manufacturing, assembly, dispensing, finishing, material handling, palletizing, remote TCP. Specifications Manufacturer: KUKA Type designation: KR 240 L210-2 2000 Type: Robotic Arm Axes: 6 Payload: 210kg Reach: 2900 mm Repeatability: 0.06 mm Weight: 1277 kg Serial Number: 910437 Control cabinet: 56178 Year of manufacture: 01/2008 Used goods – normal signs of use present. Further details, article numbers and pictures on request. Two weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stoc ...

Robot KUKA KR 240 L210-2 2000 Serial number 912870 Industrial robot including control cabinet 61246 The KUKA KR 240 L210-2 robot is an {axis} axis robotic arm, it has a payload of 210 kg and a reach of 2900 mm. Manufacturing applications include additive manufacturing. Common applications of KUKA KR 240 L210-2 include: additive manufacturing, assembly, dispensing, finishing, material handling, palletizing, remote TCP. Specifications Manufacturer: KUKA Type designation: KR 240 L210-2 2000 Type: Robotic Arm Axes: 6 Payload: 210kg Reach: 2900 mm Repeatability: 0.06 mm Weight: 1277 kg Serial Number: 912870 Control cabinet: 61246 Year of manufacture: 06/2008 Used goods – normal signs of use present. Further details, article numbers and pictures on request. Two weeks commissioning warranty. No further warranty. In addition, spare parts are always available from  ...

Robot KUKA KR 240 L210-2 2000 Serial number 911888 industrial robot including control cabinet 64961 The KUKA KR 240 L210-2 robot is an {axis} axis robotic arm, it has a payload of 210 kg and a reach of 2900 mm. Manufacturing applications include additive manufacturing. Common applications of KUKA KR 240 L210-2 include: additive manufacturing, assembly, dispensing, finishing, material handling, palletizing, remote TCP. Specifications Manufacturer: KUKA Type designation: KR 240 L210-2 2000 Type: Robotic Arm Axes: 6 Payload: 210kg Reach: 2900 mm Repeatability: 0.06 mm Weight: 1277 kg Serial Number: 911888 Control cabinet: 64961 Year of manufacture: 07/2008 Used goods – normal signs of use present. Further details, article numbers and pictures on request. Two weeks commissioning warranty. No further warranty. In addition, spare parts are always available from  ...

KUKA KR 240-2 2000 robot serial number 910452 industrial robot including control cabinet 57273 The KUKA KR 240-2 robot is an {axis} axis robotic arm, it has a payload of 240 kg and a reach of 2700 mm. Manufacturing applications include palletizing. Common applications of KUKA KR 240-2 include: additive manufacturing, assembly, dispensing, finishing, material handling, palletizing, remote TCP. Specifications Brand: KUKA Model: KR 240-2 2000 Type: Robotic Arm Axes: 6 Payload: 240kg Reach: 2700 mm Repeatability: 0.06 mm Weight: 1267 kg Serial Number: 910452 Control cabinet: 57273 Year of manufacture:02/2008 Used goods – normal signs of use present. Further details, article numbers and pictures on request. Two weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visite ...

KUKA Robot KR 240-2 2000 Serial Number 910453 Industrial Robot including Control Cabinet 57278 The KUKA KR 240-2 robot is an {axis} axis robotic arm, it has a payload of 240 kg and a reach of 2700 mm. Manufacturing applications include palletizing. Common applications of KUKA KR 240-2 include: additive manufacturing, assembly, dispensing, finishing, material handling, palletizing, remote TCP. Specification: Manufacturer: KUKA Type designation: KR 240-2 2000 Type: Robotic Arm Axes: 6 Payload: 240kg Reach: 2700 mm Repeatability: 0.06 mm Weight: 1267 kg Serial Number: 910453 Control cabinet: 57278 Year of manufacture: 02/2008 Used goods – normal signs of use present. Further details, article numbers and pictures on request. Two weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully funct ...