200 kva man used for sale

Several spare parts for a GEA Westfalia MSA 200-01-076 separator., Type of Machine: Spare parts separator

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, base plate, feet, desludge tank, inlet/outlet pipes, service tools for maintenance including pressing tool and several spare parts., Additional features:, Excluding:, - Control panel., - Water valves., Type of Machine: Cream Separator / Skimmer, Capacity: 25.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 37 kW - 460 V - 60 Hz - 1.775 rpm - 61 A, Weight: 2.850 kg, Dimensions: 195 x 130 x 225 cm

The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...

Unused gear wheel for a Westfalia MSA 200-01-076 skimming separator. Article number: 1166 3447 020. For a 50 Hz driven machine., Type of Machine: Gear Wheel, Drive line: 50 Hz, Condition: Never used

Milk pasteurisation line of 25.000 ltr/h with cream separator / skimmer. Temperature cylce: ± 3/4° (in) - regeneration - ± 55 °C (separator) - ± 72/75 °C (pasteurisation) - holding - regeneration - ± 3/4 °C (out). Line existing out of open level tank (2x lid, spraybowl), product pump (APV W 50/50), digital flow transmitter (Yokogawa FLXA402), Transmitter (Rosemount 8712) plate heat exchanger (APV N35 RKS, year: 2004, serial nr 1286, drawing no: NZ032, 4 sections, working pressure 6 bar), cream separator / skimmer (Westfalia MSA200-01-076, year 1980, serial nr 1669 642, self cleaning, bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator and service tools for maintenance including pressing tool), holding tube with slope, booster pump (APV P ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, base plate and feet, desludge tank, control panel (original Westfalia), water valves, all inlet/outlet pipes with manometer / flowindicator and service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 20.000 liter per hour, Bowl speed: 4.700 rpm, Motor power: 37 kW - 380 V - 72 A - 1.475 rpm - 50 Hz - 3 Ph, Weight: 2.200 kg, Dimensions: 190 x 130 x 225 cm

Milk pasteurisation line of 25.000 ltr/h with cream separator / skimmer. Temperature cylce: ± 3/4° (in) - regeneration - ± 55 °C (separator) - ± 72/75 °C (pasteurisation) - holding - regeneration - ± 3/4 °C (out). Line existing out of open level tank (2x lid, spraybowl), product pump (APV Puma), digital flow transmitter (Yokogawa FLXA402), Transmitter (Rosemount 8712) plate heat exchanger (APV N35 RKS, year: 2004, serial nr 1286, drawing no: NZ0321, 4 sections, working pressure 6 bar), cream separator / skimmer (Westfalia MSA200-01-076, year 1980, serial nr 1669 641, self cleaning, bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator and service tools for maintenance including pressing tool), holding tube with slope, booster pump (APV Pum ...

The Alfa Laval MR-200 Sanitary Self Priming Liquid-ring Pump is a pump specially designed for food, chemical, pharmaceutical and other industries where acid-resistant steel is resistant to the products to be pumped. All products wetted parts, i.e. pump casing, casing cover and impeller are made of acid-resistant steel AlSl 316. Clamp screws and legs are made of stainless steel AlSl 304. lntermediate part is in cast iron which is zinc coated and laquered making it highly corrosion resistant. Motor: 7,5 kW - 380/420 V - 50 Hz - 1.450 rpm - 15,3 A. Impeller diameter: 199 mm. Connections on the inlet / outlet: SMS 76 mm (3). Current maximum capacity (based on the available Alfa Laval performance curves and the current motor): 48.000 ltr/h @ 0 Bar., Type of Machine: Sanitary Self Priming Liquid-ring Pump, Stock Number: 1511, Diameter of the impellor: 199 mm, Motor: 7,5 kW - 380/420 V - 50 Hz  ...

Gear shpping machine LIEBHERR LS 200F.

Gear shapping machine LIEBHERR LFS 200

- Spindle SK 40 - Speeds 8000 Rpm with 165 Nm - Workload 2000 Kg - ATC 56 Positions - Hours spindle 10.304 - Closed housing with automatic top door - IKZ Coolant system - LTA Air Cleaning

turning length: 2000 mm greates pass round over bed: 630 mm swing diameter over slide rest: 350 mm control: Monforts Control System K bed width: 550 mm turning speed range: 2 - 1800 U/min spindle diameter in front bearing: 120 mm spindle head DIN 55027 - Size: 8 tool taper: RD2 PARAT quill stroke: 210 mm spindle bore: 71 mm total power requirement: 30 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4,90 x 2,10 x 2,00 m Three-jaw chuck / key bar / Ø250mm Four-jaw chuck 3-jaw chuck for tailstock 4-station tool post head PARAT Fixed steady rest, Ø small Fixed steady rest, Ø large Various chuck jaws, live centers, live centers, tool holders Chip conveyor with coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hanging cabinet HS 2000 with sliding door with intermediate floor Used device cleaned Dimensions: 2000 x 400 x 600 mm, WxDxH

Anchorage Rego SM 2000 M The machine when it comes to striking! Stirring machine with automatic timer Working Shaft/Agitator Shaft NEW Connection 400V, 16A-CEE plug Used machine overhauled with warranty

Technical data: - Max. cutting width 2080 mm - Max. cutting capacity at 45 Kp/mm² 6 mm - Column projection 150 mm - Automatic cutting angle adjustment 0.3 - 2 ° - automatic. Cutting gap adjustment - Number of hold-downs 10 pcs - Stroke rate up to 22 1/min - Front angle stop approx. - 2 pcs. front support arms approx. - mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cut line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 11 kW - Space requirement approx. W 3150 x H 2150 x D 2300 mm - Weight approx. 4.8 t

B&A REF: 9275 TON: 200 SCREW DIAMETER: 55MM SHOT WEIGHT: 451 STROKE VOLUME: 475CM3 INJECTION PRESSURE: 1741AR PLATEN SIZES: 780 X 780MM DBTB: 530 X 530MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 440MM MAX DAYLIGHT: 940MM EJECTOR STROKE: 130MM CONTROLS: VPC 20000E AIR VALVES: 1 HEATING CAPACITY: 12.9KW

Key data: 2000 mm, 23 mm, 18 mm

4-roll plate bending machine Imcar-Italy capacity 2000 x18/23 mm year 1995, model 4RH12/3 , TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 18 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed

B&A REF: 9259 TON: 370 SCREW DIAMETER: 70MM SHOT WEIGHT: 1060 STROKE VOLUME: 1175CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 1070 X 990MM DBTB: 710 X 630MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1460MM EJECTOR STROKE: 275MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC

Key data: 2000 mm, 6 mm, 10 mm

4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll  mm. 160 - Lower roll  mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system f ...

Work table AT 2000 with beech wood top and sliding door Work table Baker's table mobile Beech wood worktop Used device cleaned Plate sanded & re-oiled

weight max. in kg: 2.000 kg table height: max. 1.010 mm table height: min. 190 mm table surface area: 800 x 1.300 mm engine: 0,75 kW The Unicraft SHT 2000 hydraulic scissor lift table (1300058) offers a reliable solution for your lifting projects, e.g., for manually feeding a planer or saw with entire stacks of wood. With an impressive load capacity of 2000 kg and a robust construction, this lifting platform is ideal for use in industrial environments. This scissor lift table is characterized by its precision and user-friendliness, enabling you to lift heavy loads safely and efficiently. With a maximum table height of 1,010 mm, the Unicraft SHT 2000 is the ideal choice for improving your workflows and protecting the back of the machine operator. Drive: Electro-hydraulic Cable length: 3 m Safety standard: EN 1570 Condition: New with warranty The data for this ad was created with ModulMW ...

Work table AT 2000 with beech wood top and flour trolley Work table Baker's table Beech wood worktop 3 ingredient containers on the left Stainless steel flour trolley for 100 kg Used device

New stem radiator for large engines Dimensions : 180 x 900 x 2000 mm Weight : 500 Kg. With fan wheel

Puller for 200cm deep pullers NEUWagen profile 40x40mm screwedExternal dimensions: W: 213cm D: 64cm H: 180/190cmInterior dimensions: W: 203cm D: 64cmSee pictureDo we have various large pullers and pullers in stockDetails see pictures

Spiral mixer extendable Kemper SPA 200Manufacturer : KemperType : SPA 200200 kg flour 320 kg dough2 watchesstainless steel kettle and spiral with 3 extendable kettle 1 kettle has cracksDetails see picture 

Diosna Lifting Kneader D 200 / 2G usedThe Diosna D 200/2G is a powerful kneading machine that is designed for use in bakeries and pastry shops. Â With a boiler volume of 200 liters and a capacity of 2 speeds, the lifting kneader is suitable for the production of dough in large quantities. The robust construction and high-quality materials ensure a reliable and durable machine. With a lifting kneading machine such as the Diosna D 200/2G, high-quality doughs can be kneaded efficiently and evenly. DescriptionLifting kneader Diosna D

used lifting mixer Diosna D 200 / 2GBdescriptionLifting mixer Diosna D 200 / 2G with fixed kettleManufacturer: Diosna Dierks &, Söhne GmbHTyp: D 200 / 2GMit stainless steel kettle and lifting armKettle for max. 200 kg dough or for max. 125 kg flour2 speeds slow and fastMoving on castorsWith 1 timer380 Volt 7.1A 50HzThe Diosna D 200/2G is a powerful kneading machine designed for use in bakeries and confectioneries. With a boiler volume of 200 liters and a capacity of 2 speeds, the lifting kneader is suitable for the production of

Flour mills Rotormat Bio-200Manufacturer : HommelType : Bio-200GRINDING TURBINE ROTORMATTtype:BIO 200Grinding capacity approx. kg/hour fine80 - 100Grinding capacity approx. kg/hour medium120 - 150Grinding capacity approx. kg/hour coarse150 - 200Natural stone:highly wear-resistant200 mm DiameterPower:3 KW 4 PSconnected load:400 VTrichter capacity:approx. 40 kg GrainWeight:approx. 80 kgDimensions cm:100 x 60 x 135Â For details see pictures.

Lifting tipper Kemper HK 200 RD Manufacturer : Kemper Type : HK 200 RD Year of construction : 2011 Tipping height approx. 250cm Dimensions approx. W: 195cm D: 150cm H: 360cm for WP DK 250 Baker's condition Details see picture

ALU Puller with Cloth for 200 cm Deep Stoves NewProduct DescriptionCondition: NewMaterial Puller: AluminumSuitable for 200 cm Deep StovesWith Side FasteningDimensions Puller: Width 58 cm, Length 240 cm, Height 5.6 cmDimensions Cloth: Width 56 cm, Total Length 470 cmDetails see pictures.

Jelly spraying machine - is used - Manufacturer: Bakon - Model: Jelly 2000 M (G) - Year of construction 2004 - Exterior Dimensions W.: 48 cm, D.: 48 cm, H.: approx. 110 cm For details see pictures.

Lifting kneader Diosna D 200 Plus Description Lifting kneader Diosna D 200 Plus with fixed boiler Manufacturer: Diosna Dierks &, Söhne GmbH Type: D 200 Plus Condition: revised and repainted With stainless steel kettle Kettle for max. 200 kg dough or for max. 125 kg flour 2 speeds slow and fast With flour dust cover Mobile on casters Machine completely repainted With stainless steel control box With 1 timer NEW Many parts renewed Boiler polished 380 Volt 

Baking gloves 2Â pair up to 200ËšC- max. 350ËšCProfessional gloves for the bakerBaking gloves made of plush handlesOperating temperature 200ËšC -max. 350ËšC (short-term)Weight 348g325x150mm, short cuffDetails see picture

Rego SM 2000 Automatic Stop Machine / Stirring Machine Product description: âœ" Condition: used, tested, baker's condition âœ" Manufacturer: RMT - Rego GmbH âœ" Type: SM 2000 âœ" Year of construction: 1996 âœ" Power (kW): 1.68 âœ" Volt: 400 âœ" Amp.: 8.13 âœ" incl. 1 stainless steel kettle and 1 whisk âœ" electrically driven height-adjustable kettle Details see pictures

Baking gloves 2Â pairs (4 pieces)Professional gloves for bakerOperating temperature 100ËšC -max. 200ËšC (short-term)Weight 300g450x150mm, with stiles made of linen fabricSpecial cotton fabric MittensDetails see picture

(2 pairs) Oven gloves Baker's gloves Heat-resistant +200 Âcf glove with cuff made of linen fabric grey, heat-resistant up to +200 Âcnot machine washable, approx. 36 cm long, 1 pair We have a larger number in stockDetails see picture

Pullers ALU for 200cm deep furnace NEWAductors made of ALUApullers for 200cm deep furnacePullers dimensions: W: 240cm D: 58cmDo we have various large pullers in stockDetails see picture 

Pullers with puller carriage for 200cm deep furnace NEWThe puller trolley stainless steel with 10 ALU pullerson rollersTrolley profile 40x40mm screwedOuter dimensions: W: 251cm D: 64cm H: 184cmInternal dimensions: W: 243cm D: 64cm10 pieces Pullers made of ALUAductors for 200cm deep furnacePuller dimensions: B: 240cm T: 58cmSee pictureDo we have various large pullers in stockDetails see picture 

Cake ring made of aluminium à ̃ x H: 200 x 60 mm NEW ( 10 pieces )Dimensions: à ̃ x H: 200 x 60 mmMaterial thickness: 2.0 mmDetails see picture

4 Ink Pumps Complete Technotrans TB 200-15/9 Ink Pump Year 2007 Capacity 200kg bins Air Pressure: 8bar

pressure: 200 t nominal power: 2000 kN stroke length max.: 1700 mm working feed: 50 mm/sec weight of tools max.: 50000 kg voltage: 400 V table-size: 4.800 x 2.400 mm total power requirement: 99 kW weight of the machine ca.: 113 t dimensions of the machine ca.: m passage width: mm stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Tetra Pak A3 Compact Flex Filling Line – 200 ml Slim Complete Carton Filling Solution | 9,000 pph | Aseptic Packaging This used Tetra Pak A3 Compact Flex filling line is designed for the efficient filling of 200 ml Slim carton packages. The line offers a compact and reliable solution for producers of liquid food and beverage products, including dairy, juices, and still drinks. The system consists of key Tetra Pak components ensuring smooth operation from filling to final packaging. Line Configuration - Filling Machine - Machine: Tetra Pak Filling Machine - Model: A3 Compact Flex - Year of Manufacturing: 2010 - Format: 200 ml Slim - Capacity: 9,000 packages per hour - Operating Hours: 16,444 Accumulator - Machine: Tetra Pak Accumulator - Model: ACHX 10 - Year of Manufacturing: 2010 - Operating Hours: 15,021 Straw Applicator / Distributor - Machine: Tet ...

Model: KMRS-200 Year: 2016 Condition: Used Serial Number: 17508-001 Stock Number: 2969 Capacity: 700 pc/h Belt width: 325 mm Diameter cutting ring; 270 mm CIP unit hot water min. 60 degrees Celsius Compressed air:5 Bar, 3.5 Nm³/h Power: 3 x 400V, 50Hz, 2kW Dimensions: 1600 x 1150 x 1500 mm

Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Die cushion stroke: 0 - 200 mm Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Weight of machine approx.: 533 ton

Model: 2000/600 Condition: Used Stock Number: 3297 Belt width: 600 mm Description: Variable speed Transport length 2000 mm Power: 3 x 400V, 50Hz, 0.25kW Dimensions: 2200 x 850 x 1200 mm

A manual screen printing machine Eickmeyer is available. Material thickness range: 2mm-25mm, max. printing dimensions X/Y: 1700mm/700mm, machine dimensions X/Y/Z: approx. 2650mm/2100mm/1500mm. An on-site inspection is possible.

Key data: 200 t, 80 mm

Inv. Num. : 9036 Type: 200 T Producer: ROSS Created: 2003 Parameters: Control system: DIMECO MCU 24 Compressive force: 200 t Table length: 2100 mm Table width: 1000 mm Stroke: 80 mm Adjusting the ram: 150 mm Machine weight: 36700 kg