126,612 used machines on RESALE, but how to find them? Machine Search
Capacity: 2500 ton Slider stroke: 190 mm Size of a working course of slider before its extreme bottom position corresponding nominal capacity: 4.5 mm Number of slider courses per minute: 20 Maximum distance between table and slider (in lower position of slider): 800 mm Distance adjustment between table and slider: 20 mm Table overall dimensions: - from front to rear: 1400 mm - from left to right: 1250 mm Thickness of a under-forginig plate: 230 mm Hole diameter in a table: 125 mm The size of a slider in front - back: 900 mm Lower eliminator stroke length: 190 mm force of the bottom pusher: 75 ton Distance between railings: 950 mm Course of a pusher in a slider: 15 mm Capacity of a pusher in a slider: 25 ton Admissible number of starts per minute: 10 Machine overall dimensions - length: 3910 mm - width: 3920 mm - height: 6220 mm Press weight: 97715 kg
Producer: GRAEF Type: EURO 2560 S Power supply: 230V / 50 Hz Power: 0.3 kW Slicer cutting machine GRAEF type EURO 2560 S Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
Storage tanks outside marbled for wine, water, fruit juice, schnapps 10.250 liters NEW! Measurement und weight: Diameter: 2060 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges) ...
used
description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...
Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 10.250 liters NEW! Measurement und weight: Diameter: 2060 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra ...
2pcs 3500 x 2000 x 350 mm price 7000eur/pc
GE UroView 2800 (urological x ray and fluoroscopy) with the following device components: Generator Jedi 00-883988 -01 _ 65 kW Tube Varian A-286 0.3/1.2 Image amplifier _ 00-884063-01 32.5 cm OEC workstation ESP Cine (trolley with double monitor) Sony Video Graphic Printer UP-960 CE Review-/double monitor (flat screen) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do ...
Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base
Powershift gearbox ex Hakotrac 1800 DA due to fire damage, axle and PTO gearbox not complete, untested, housing damaged, according to Fig. Missing parts such as diff.lock and PTO shaft from gearbox ex 2250 DA and other used parts such as lamella coupling, differential, axle shafts, power lifter, Yanmar diesel engine, radiator etc. available - see sample photos. Info and offers on request. We do not send package offers, no lists and do not respond to anonymous messages - please provide full name and place of residence as well as telephone number for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, env ...
ISO refrigerated container 20ft standard box, manufactured to ISO 1496-1 Type: 22R1 State - used and processed (on request new paintwork at an extra cost!) - Current PTI check - CSC approval - ready for immediate use Visit of our offered containers is possible at any time on site! Color Pure white RAL 9010 TECHNICAL DATA - Dimensions on the outside: (L x W x H) 6,058 x 2,438 x 2,591 mm - Dimensions inside: (L x W x H) 5,412 x 2,292 x 2,300 mm - Volume: 36.5 m3 - Weight: 2.88 t - Payload: 21.12 t - Temperature range: -25°C to +30°C - Refrigeration carrier: R134a - Power: 6-10 kW/h (indicative! Real values depend on several factors.) - Cooling unit: Carrier Streamline (2006 built), 380-460 V, 50-60 Hz, 5-pin plug/CEE 32A - Transportable and crane-capable - PTI check (= Pre Trip Inspection) function check - CSC safety approval SPECIAL USE / CONVERSION (on ...
McIntyre 200B Shear Available with or without a stand, this machine might look small but it has a big cutting capacity Small but powerful McIntyre's wide experience in hydraulic equipment manufacture has enabled us to build an 8†shear with a staggering cutting force. Although equipped with only a blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it. Our company can provide this equipment with short delivery time.
approx. 120 packages per minute Bag width: approx. 80 to 250 mm Bag length: approx. 400 mm max. infinitely adjustable Dimensions: approx. 1,260 x 2,500 x 1,700 mm Net weight: approx. 1,100 kg
used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ Operatin ...
Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head
20ft (6m) Standard Box Container 8'6", first trip (new) manufactured according to ISO 1496-1, made of weather-resistant Corten steel, planked inside with 28mm waterproof hardwood floor, with CSC approval (5 years validity) ALSPCONTAINER® PRIME SERVICE & QUALITY In our depot in Freilassing we always have new containers in different colours and finishes in stock. This ensures a short delivery time and the possibility to visit the containers before purchase. LOOK FOR YOUR CONTAINER US! PrimeQUALITY As a very special service, we offer the option to buy a flawless first-trip container. For this purpose, transport damage is professionally repaired and dirt is removed. State As good as new / First trip â with slight traces of usage due to a one-off sea voyage Color Gentian blue RAL 5010 or subject to availability TECHNICAL DATA - Dimensions on ...
Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...
Single Belt Press EB 1004 Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1670x 1680 mm Weight: 1340 kg Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh wate ...
Knife for cutter LASKA type K-200 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
One belt press EB 1004 EL Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 3390 x 1670x 1630 mm Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh water (connection f ...
Sell completely dismantled as part of DEUTZ TCD2015 V8 MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Tel: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Email: info@miw-zeven
Seydelmann AU 200-B angle grinder, 200 mm hole plate diameter, almost completely made of solid stainless steel, with loading device. You are very welcome to test the machine in Koblenz, Germany.
Pallet stretch-wrapper PIERI Speed 100 pallets/h Control SIEMENS S 7
Used PRALINES production line: Producer: Aasted-Microverk APS. Model: 275 MINI for a cold stamp Year: 1996 (commissioning year 1997) The line used in 1997-2014 (2015) Description: forms: approx. 3500 items (molds are in different technical condition) Types of Forms: · Molds - number of places for pralines - 28: o "rectangular" forms 28 places for pralines (14 pralines, "violin" shape, 14 pralines each) trumpet shape) o "rectangular" forms 28 places for pralines (14 pralines, harp shape, 14 pralines each) shape "piano") o Molds in the shape of a "trunk" 28 places for pralines o "Small ball" shaped molds 28 places for pralines o "Big ball" forms 28 places for pralines o "Square" forms 28 places for pralines There are approx. 2500 items of this kind. · Molds - number of places for pralines - 56: o Forms "bears", "cats" 56 places for pralines (28 "bears", "cats" each) ...
In our depot in Freilassing we always have new containers in different colours and finishes in stock. This ensures a short delivery time and the possibility to visit the containers before purchase. CHOOSE YOUR CONTAINER! PrimeQUALITY As a very special service we offer the option to buy a flawless first-trip container. For this purpose, transport damage is professionally repaired and dirt is removed. State New / First trip – with easy traces of usage through one-time sea voyage Color Bottle breakfast RAL 6007 (or subject to availability) TECHNICAL DATA Dimensions outside: (L x W x H) 6,058 x 2,438 x 2,591 mm Dimensions inside: (L x W x H) 5,844 x 2,330 x 2,350 mm Weight: approx. 2.22 t Payload: approx. 28.27 t Facilities CSC Safety Approval Material: CorTen steel, weatherproof Floor: 28mm hardwood, waterproof Doors: 270° opening, 4-fold linkage Coating: insi ...
The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...
CNC - controlled press brake with 700 mm installation height + 400 mm press bar stroke - a press brake of excellent quality - used machine built in 2006 - very good condition, pressing force 3,500 kN, largest bending length 4,200 mm, passage between the side stands 3,550 mm, extension in the side stands 500 mm, maximum installation height 700 mm, press beam stroke up to 400 mm, press beam rapid speed 200/180 mm/second, drive power 15 kW, dimensions approx. 5 m x 2.3 m x H 3.45 m, weight 25,000 kg. Equipment: 8 CNC axes Y1/Y2 (press bars up and down) - X1 + X2 (the stop blocks back and forward 750 mm) - R1 + R2 (back stop blocks up and down to 200 mm) - Z1 + Z2 (stop blocks width adjustment 3,500 mm), DELEM® CNC - control with color graphics and 15" screen, Laser beam bending line monitoring, CNC – controlled hydraulic dynamic bombardment, compensation of stand suspension, WILA® hy ...
TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper
Material: mild steel Drive: 5.5 KW Weight: 1750 kg Area per deck: 5.2 m²; Machine fully reconditioned with new bearings. Brush cleaning / filter inserts of your choice: 0.1-5 mm. > > conversion and advanced construction possible.
Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.
used
Kolbe K 220 bandsaw, table version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
Stock # U2333-1 Used carbon steel jacketed paddle type mixer by Kates (PL) type 2M1.6. Total volume 1700 l, working volume about 1600 l. Mixing chamber is designed for work on pressure up to 0.14 bar in working temperature range from 5 - 40 C. Mixer has mixing shaft with 6 paddles and two rods working close do front walls. Shaft is driven by el. motor 55 kW, 1483 rpm in Ex design, through gearbox with reduction i = 72.71, what gives working rotation of shaft up to 20.39 rpm. Mixing chamber is covered with carbon steel cooling jacket with volume 75 l. Working pressure on jacket up to 0.5 bar at temperature in range from 5 up to 40 C. Mixer has top inspection manway with bolted lid and diameter 500 mm. Central bottom discharge with pneumatically operated valve. Mixer is mounted on carbon steel supporting construction. Machine is able to work as Ex II3GcIIA T3 /ATEX. Mixer is equipped wi ...
Specifications: width 2000 mm height 1200 mm Depth of 850 mm
New machine 24-month warranty Benefits: + TOP value for money + robust planetary stirrer with simple, manual control + 3 speeds can be switched by lever, bel constant power transmission + with stainless steel safety grille + when lifting the grid, the machine switches off immediately + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 20 litre stainless steel boiler - 1x whisk for 20 litres boiler - 1x flat stirrer for 20 litres boiler - 1x kneading hook for 20 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - additional 20 litre stainless steel boilers - additional tools (stirring whisk, flat stirrer, kneading hook) Technical data: - Engine power: 1.1 kW ...
Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...
New machine Stainless steel model 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + Housing made entirely of stainless steel + complies with the strictest hygiene regulations + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 20 litre stainless steel boiler - 1x whisk for 20 litres boiler - 1x flat stirrer for 20 litres boiler - 1x kneading hook for 20 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: ...
New machine 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + with integrated dust/spray protection cover + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Stainless steel boiler support arms + closed planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 20 litre stainless steel boiler - 1x whisk for 20 litres boiler - 1x flat stirrer for 20 litres boiler - 1x kneading hook for 20 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - additional 20 litre sta ...
New magnetic tape, E-or hydraulic drive, if you have questions 0049016044 44300
New machine Stainless steel model 24-month warranty Benefits: + very good value for money + Machine is completely in stainless steel (also the collecting bowl) + Chocolate rasp in uniform thickness (0.1 - 3 mm thick) + rattles 2 chocolate blocks (up to 2.5 kg each) + easy to use + hygienic, easy to clean and keep clean + Drive meter can be replaced separately + with speed regulation Technical data: - suitable for 2 blocks of chocolate (up to 2.5 kg each), - Dimensions for chocolate blocks (min - max): --- width: 17 - 40 mm --- depth: 145 - 210 mm --- height: 40 - 330 mm - Device dimensions: 393 x 370 x 638 mm (WxDxH) - Engine power: 90 W - Connection values: 230V - 1Ph - 50Hz - Net weight: 30 kg
Outdated MAN E2876LE302 bio gas engine in Exchange.
Filter tower with 166 nozzle filters with automatic pneumatic cleaning used Manufacturer: NETZSCH Total filter area approx. 225 m2 166 hose filters each approx. 1.36 m2 filter area Wire filter baskets approx. 120 mm length approx. 3.6 m with pneumatic cleaning 4 pneumatic knockers and compressed air loosening Collecting hopper with vibrator and blow-through lock Tower diameter outside: approx. 3.4 m incl. flange approx. 15 cm Tower height approx. 13.5 m Total dimensions with boxes for cleaning: approx. 3.4 x 4.1 x 13.5 m The filters were used in a carbon production plant. Above the filters there is a room about 4 m high, closed with a door, which makes it possible to change the filters inside. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
Tyre testing machine - static balancer for passenger tyres. Tyre size from 15 "to 18" (20") CE certified More details see the attached description!
Rotary feeder, modern bottom opening station, CCS control system, 2 valve units, bottom patch with 2 colour tail end printers
maximum number of results exceeded
please refine your search
