180 fp used for sale

2.55 KW

Sunnen 1804 Honing machine, manual under power The machine can be seen working in our warehouse in Gussago BS. Test run possible Mimu Machine Tools, Honing dia (min-max): 1.5-120, Honing length (max): 250

- 4 Chuck 1400 mm - Steady rest 3 units Ø 100-1050 - Roller steady open 2 units Ø 1120 - KNOLL Chip conveyor 2022 - Boring bar Ø 260 x 3500 mm - Boring bar Ø 200 x 1500 mm - Boring bar Ø 150 x 1100 mm

Ref. no.: 18255 Manufacturer: ENGEL Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ Advanta ...

Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible.

: 0554 mm : 370 mm : 2000 mm : 280 mm : 104 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel: x=1600mm Y=800mm Z=900mm Spindle speed max. 2000 revolutions per minute Control HH 407 A Cover of the z axis present but defective.

Key data: 3000 , 702 , 60

Presse à injecter ENGEL 300 T Type : VICTORY 1800 / 300 POWER Année de fabrication : 2008 En bon état de fonctionnement Force de fermeture : 3000 KN / 300 T Diamètre vis : 60 mm Volume injectable : 763 cm3 Poids de l’injection en PS : 702 gr Pression d’injection : 1960 bars Vitesse d’injection : 284 cm3/s Course ouverture moule max : 900 mm Epaisseur min moule : 400 mm Dimensions des plateaux : 1100 x 1100 mm Nombre de litres d’huile : 870 L Dimensions : 7,2 x 2,0 x 2,50 m Poids machine : 20 000 kg

Presse à injecter ENGEL 180 T Type : VICTORY 500/180 POWER Force de fermeture : 1800 KN - 180 T Année : 2008 Diamètre de la vis : 45 mm Volume d'injection : 318 cm³ Pression d’injection : 2040 bars Épaisseur min/max moule : 300 750 mm Distance entre colonnes : 860 x 830 mm

Height=2.95 m, Overall length= 1.5 m, Overall width= 2.76 m, Net weight= 1900 kg,

BR-G17 18038 Testing Machine Manufacturer: Kirschenhofer Including Yaskawa ERAR-1000-06VX8-E10 robot Camera The Kirschenhofer testing machine type BR-G17 18038 is a specialized device that was developed for automated test processes in industry. It is particularly suitable for quality control of various products and components. Here are some of the key features and functions of this testing machine: Main features of the Kirschenhofer BR-G17 18038: Automation, versatile inspection methods, high speed, user-friendly user interface, robust design, data management.

Aircooled chiller CIAT LDH 1800V STD 493 KW Cooling capacity: 493 kW / 140.18 tons (12/7 — 35°C) Year of manufacture: 2011 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 6 pcs. Copeland ZP385KCE-TWD-522 (scroll) Type of refrigerant: R410а Number of fans: 8 pcs. Hydraulic module: 1 pcs. water pump WILO DL80\160-11\2, expansion vessel, buffer tank. Dimensions: 6.66x2.2x2.45 m. Weight: 6626 kg. Working hours: 20974/19470/19396/19427 h. Condition: Good

NEW, 180 cm width, 215 kg net weight, suitable for Euro attachment, Year of construction: 2021

NEW, pallet fork 200 cm wide, 4.5 t tines, 120 cm long tines, with Volvo BM mount

180cm extension length, Suitable for tines up to max 130x50mm, € 230,- excl. VAT (per pair)

180cm extension length, Suitable for tines up to max 130x50mm, € 230,- excl. VAT (per pair)

180cm extension length, Suitable for tines up to max 130x50mm, € 230,- excl. VAT (per pair)

Pallet fork extension, 180cm extension length, Suitable for tines up to max 130x50mm, Price per pair excl. VAT.

S. No.: G366J310535 Counter: Color Total 2’878’974 / B & W Total: 2’961’001 Format/Sizes: Maximum size: 330 x 660 mm Maximum standard sheet: 330 x 488 mm Minimum size: 98 x 146 mm Equipment / Additional information: With Fiery PRODUCTIVITY/PRINT SPEED • Average Monthly Print Volume: Up to 80,000 • Duty Cycle: 750,000 • 80 ppm (8.5 x 11"/A4), 52–350 gsm with Performance Package • 80 ppm (8.5 x 11"/A4), 52–220 gsm • 60 ppm (8.5 x 11"/A4), 221–350 gsm • 44 ppm (11 x 17"/A3), 52–350 gsm with Performance Package • 44 ppm (11 x 17"/A3), 52–220 gsm • 32 ppm (11 x 17"/A3), 221–350 gsm IMAGE QUALITY • 2400 x 2400 dpi VCSEL ROS for sharpness, detailed shadows and bright highlights • 1200 x 1200 x 10 RIP rendering without down sampling for Ultra HD performance

Manufacturer: Pinacho Model: Smart Turn 6/180 Power: 7.5 kW Frequency: 50 Hz Control: FANUC CAPACITY • Center height: 180 mm • Center width: 750–1000 mm • Permissible diameter over bed: 360 mm • Permissible diameter over longitudinal slide: 335 mm • Permissible diameter over cross slide: 198 mm • Bed width: 250 mm SPINDLE • Spindle bore: 42 mm • Spindle nose: CAMLOCK no. 5 (DIN 55027 no. 5) • Spindle taper: Morse taper no. 4 • Number of spindle speeds: 1 • Cutting speed (constant surface speed): 0–4000 U/min FEED • Working feed Z,X (mm/min): 0–10000 mm/min • Rapid traverse Z,X (m/min): 10 m/min TAILSTOCK • Tailstock quill diameter: 58 mm • Tailstock quill travel: 200 mm • Tailstock taper: Morse taper no. 3 MOTORS • Main motor power: 5.5 kW • Feed force longitudinal (N): 4500 N • Feed force cross (N): 3500 N • Cool ...

turning diameter over bed: 360 mm turning diameter over slide rest: 180 mm turning length: 900 mm turning speed range: 25 - 1600 U/min total power requirement: ca. 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 1 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU314N465 LocationBarneveld Makeunknown, manufacturing tag is missing Main Features MaterialStainless steel Volume18000 Ltr. Motor3 KW Specified Features - Stirring vessel MaterialStainless steel Closed stirring vesselcheck Capacity+/- 18000 Ltr Vessel sizesdia.2800mm x3200mm Dished bottomcheck With covercheck Outletdia.80mm With paddle stirrercheck Motor3,0 KW, 220/380 Volt Information Mounted on legscheck Floorspace3,3x3,3 M Total height5,2 M Weight2000 KGStirring vessels-Stirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 4

Technical data/equipment: 4 planing shafts Voltage 380 V/ 50 Hz Power consumption 20 kW Weight approx. 1500 kg More dates to follow The sale is carried out on behalf of the owner, in the condition as it is, excl. Warranty.

Size: 1.800 x 4.000mm - Year of Manufacture: 1998 - With Electrical motor (11 kW/6), Cardan shaft and springs - Will be overhauled, sandblasted and painted.

Power: 56,1 kW - Amperage: 173 A - Voltage: 300V. DC - 100% ED Magnet L x W: (1.800 + 2 x 450=) 2.700 x 1.600 mm - Conveyor belt: 1.600 mm - AA.: Ca. 4.500 mm

Manufacturer: Single Temperiertechnik GmbH Model No.: Advanced Oil D2-180-18-0 Year of Make: 2016 Heating capacity: 18 kW Specific heating capacity: 23.2 kVA Rated current: 32 A Supply Voltage: 3×400V/N/PE Frequency: 50 Hz Max. temperature: 180 °C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: Heat transfer oil External capacity max.: 22 litres Net weight: 169 kg Device dimensions: Standard design (according to device type) Application: Temperature control for industrial processes, tools, plant modules Location: Schierling

A barely used surface grinding machine Optimum is available. Grinding width: 220mm, grinding length: 470mm, grinding height: 350mm, table dimensions X/Y: 210mm/450mm, max. table spindle center distance: 450mm, grinding wheel dimensions X/Y/Z: 200mm/13mm/31.75mm. Machine dimensions X/Y/Z: approx. 1200mm/1450mm/2000mm, weight: approx. 800kg. Dokumentation vorhanden. An on-site inspection is possible.

Transnorm belt curve conveyor left GKF 180°-1270-1100-IR1200 -- NEW RA1945 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 180° Driven ...

Features: automatic edge guidance for high quality roll presentation, measuring function, large inspection area, cut length function, foot operated on off switch, speed control, reverse capability, emergency stop, locking wheels allow easy movement. Cradle: with 6 rollers, max. roll width: 1800mm, inspection surface: 600mm, max. re-roll diameter: 400mm, operating speed: 0-45m/min, motor: 1x230V/50Hz, 1x120V/60Hz, length: 2450mm, width: 1500mm, height: 1110mm, weight: 302kg. Condition: counter not connected, was removed, switch for the backlight is missing, on off switch is missing, foot pedal for start/ stop is missing, cutting knife is missing. Operating hours unknown. An on-site inspection is possible.

working width: 1800 mm weight: 410 kg dimensions: 1800 x 1500 x 750 mm Bucket width approx. 1800 mm Bucket depth approx. 1500 mm Bucket height approx. 750 mm Entry pockets 70 mm x 180 mm Weight approx. 410 kg Capacity approx. 1300 liters Made in Germany, powder-coated The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 6 St. sanding width: 180 mm Sanding height max.: 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----------------------------------------- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 2550 mm throat: 310 mm stroke: 200 mm ajustment speed: 80.0 mm/sec working feed: 10.0 mm/sec return speed: 58.0 mm/sec dayligth: 385 mm table width: 240 mm work height max.: 885 / 1050 mm oil volume: 180 ltr. total power requirement: 15.0 kW weight of the machine ca.: 9850 kg. range L-W-H: 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition () - in checked condition - machine video - https://www.youtube.com/watch?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) with 4x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) with digital position display ...

Used Höcker Dreisack 180 Socks with Feet Without blower

Dough mixer Manufacturer: Diosna With paddle Stainless steel bowl Volume: 180 liters Dimensions: 90x95x135cm Electric power: 3.5kW Voltage: 380V 50Hz

Type: MIX-180V Serial number: 2440 Year of construction: 2023 Mixer: 180 litres, double paddle Mixing speed: 6 - 60 RPM, frequency controlled Vacuum pump: Busch 21m³/h Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 3kW Dimensions: 1750 x 850 x 1450 mm Weight: 388 kg Machine in new condition, only 8 working hours!

Key data: 180 mm, 400 mm

Control Siemens ... Sinumerik 840 D Turning diameter... 180mm Turning length... 400mm Inclined bed Spindle bore ... 63mm Turret head Tool turret ... 12 L x W x H ... 3875 x 2122 x 2345mm Machine weight ... 7000kg Spindle speed... 10-3500 rpm The machine is in good condition, possible to test under power at our warehouse in Brno.

CANALI log band saw system model BBS. V - PACIFIC - 1800 Type 555 Refurbished 2024 CANALI pneumatic clamping carriage with 4 clamping claws, speed 6-120 m/min., 100 kW 3 log turners, 4 ejectors, cutting thickness adjustment 150 mm/sec. Log feeding station with insert, hole pull with model cross conveyor complete sharpening room equipment Iseli stellitizing machine SAA, Iseli leveling machine EBW-E, rolling machine with straightening bench, Band saw sharpening machine and leveling machine Electrical cabinets and control panels, control cabs Refurbished 2024

Features Volume 15180 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3750 mm Height 2250 mm Diameter width 2600 mm Weight 050 kg Material 2B=IIIC ground Surface outside 2B=IIIC ground Description Topsoil: Clapper bottom Downward-swept vent pipe DN 40 with threaded connection DN 50 according to DIN 11851 Threaded welding nozzle DN 40 with T-piece and airlock connection DN 50, Threads according to DIN 11851 Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 430x320 mm Sample tap DN 15 Ladder hook at the top Downward-swept CIP cable DN 50 Clear drain with angled seat valve with flange with disc valve DN 50 Underbody: Clapper bottom Remaining drain with forward-drawn outlet bead with flange and angled seat valve DN 50 with cap 4 calotte feet, height-adjustable, with w ...

This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information.

This 9-axis DOOSAN PUMA TT 1800 SY was manufactured in 2014, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT 1800 SY machine we have for sale. Contact us for more information.

This Pinacho Smart Turn 180/42 1000 was manufactured in 2012. A robust horizontal turning machine featuring a turning length of 1000mm, spindle clearance of 42mm, and a turning diameter of 360mm. It includes an 8-fold tool changer and Fagor 8055tc control. Dimensions are 2.5 x 1.15 x 1.65 m, weighing approximately 1.2t. Consider the opportunity to buy this Pinacho Smart Turn 180/42 1000 horizontal turning machine. Contact us for more information.

This IMA BIMA P480V 180/480 was manufactured in 2001. A CNC Wood Machining Centre ideal for diverse woodworking applications. Contact us for more information.

This 3-axis Takamaz X-180 horizontal turning machine was manufactured in 2008. It features a maximum turning diameter of Ø 210 mm, a turning length up to 230 mm, and a bar diameter capacity of Ø 51 mm. The spindle supports speeds up to 3,500 RPM, enhancing productivity. Ideal for precision machining, it includes a 12-station revolver turret and rapid traverse speeds of 24 m/min on both X and Z axes. Contact us for more information about this machine.

Stainless Steel Mash Tun 1800L. Manufactured: 2015 Manufacturer: Brewing Vessels Ltd. Insulated with 80mm of insulation. Side entry manway. Sight level side window. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Two Polymaster sample display machines for the film industry are available. Working width: 1900mm/2100mm, roll weight: 100kg, machine dimensions X/Y/Z: approx. 2550mm/1050mm/2000mm. Documentation available. An on site inspection is possible.

This plastic 3D printer was manufactured in 2018. The MASSIVIT 1800 PRO features a print volume of 145 x 111 x 180 cm and supports materials like Dimengel 90 and 100. It includes an automatic cleaning mechanism, advanced monitoring with an integrated camera, and remote control capabilities. If you are looking to get high-quality 3D printing capabilities, consider the MASSIVIT 1800 PRO machine we have for sale. Contact us for more information about this machine.

cutting width: 3.400 mm Motor output: 2 x 1,1 kw kW weight of the machine ca.: ca. 400 kg saw blade diameter: 330 mm swivellable: -45, 90, +45 ° : 45, 90 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This OiMA SACMI 3300-180 was manufactured in 2009. It features a robust electric-hydraulic hybrid drive and an integrated cooling system. The machine is equipped with a GDNet communication interface for real-time monitoring and diagnostics, ideal for producing medium-to-large plastic components. Consider the opportunity to buy this OiMA SACMI 3300-180 hydraulic injection moulding machine. Contact us for more information.

Pressure 10 bar, Pump capacity 200 m3/h Liquidity 250 CST el.mootor 132 kw , 1315 rpm , 232 A 5 pcs.