We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,257 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
4 pcs Kragarm regalia stand, one-sided, new, built year: 2019, consisting of: - Also possible with Dacharm! - Also possible with Dacharm! Technical data: Technical data: Shelf height: 5,200 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 750 kg max. Load capacity / stand: 2.250 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 180 Number of foot profiles: 4 pieces / IPE 180 Number of Kragarms: 12 pieces / IPE 100 Number of cross bandages: 1 piece Number of spacers: 6 pieces Incl. screws, plugs and load labels Item locations / subject to availability: Germany + Austria + Switzerland Freight / Delivery: 5 - 10 business days after receipt of payment Freight costs (D): &aci ...
new
4 pcs Kragarm regalia stand with dacharm, one-sided, new, built: 2019, consisting of: Technical data: Shelf height: 5,200 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Dacharme: 1,500 mm, 5° rising or falling Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 850 kg max. Load capacity / stand: 2,600 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 180 Number of foot profiles: 4 pieces / IPE 180 Number of dacharme: 4 pieces / IPE 100 (with three tabs) Number of Kragarms: 12 pieces / IPE 100 Number of diagonal dressings: 2 pieces Number of spacers: 6 pieces Incl. screws, plugs and load labels We are happy to check for them whether this shelf is designed for their wind and snow loads! Item locations / subject to availabil ...
used
Manufacturer: Kuka KR 180-2 2000, Year: 2004, Max workpiece weights kg: 180, Year :2004
used
Manufacturer: KUKA KR 180, Year: 2004, Max workpiece weights kg: 180, Year :2004
used
Volume bucket 180 cm working width suitable for 30-40 t excavators, with Lehnhoff MS21 mount, mount width: 510 mm, bolt diameter 80 mm,
used
The Discaf 120-180 kg coffee roaster 2 vaccum Paris T16 packing machines (1 kg, 125g and 250g with the possibility of converting the forming tubes to other weights) Other parts such as: , elevators, mixer, Z-type feeder, etc. http://menparis/en/machinery/t-16-fully-automatic-packaging-machine/ https://www.discaf/mixted-industrial-coffee-roasters-TF-120-300.html
used
GE Äkta Purifier 10 FPLC System Box 900 P 900 Pump /10 ml pump heads UPC 900 Monitor INV 907 Valve M925 Mixer / 6 ml mixing chamber Conductivity Flow Cell pH Sample CU 950 Interface/Communication Module FRAC 920 Fraction Collector Unicorn Software
used
Face cutter, slip-on cutter, milling head WMW, SMALCALDA FPR160 diameter: 160 mm Number of cutting edges: 10 diameter base body : 180 mm height: 50 mm with cutter mandrel SK40 used, tested ! dimensions ( cutter ): Ø 180 x 227 mm
new
For sale are 20 NEW injection pumps or diesel pumps for 4 cylinder Iveco FPT engine ( 12 volts ) expanded from new engines that were for generators & water pump systems. ( Replaced due to extension to 24 volts ) . Fit for Iveco FPT engine: NEF 45 SM 1 ( 4.5 liters) . Type number & model of pictures. Sale individually or all together Shipping is possible.
used
Solenoid valve, directional control valve, 5/3-way solenoid valve SMC EVS7-6-FPG-D-3ZM0-Q VV71-FPG Operating pressure: 0.1 - 1.0 MPa ( 1.0 - 10.0 bar ) 2x Control solenoid: 21 - 26 V DC New ! Dimensions: 195 x 38 x 120 mm
used
Slip-on cutter, insert cutter WMW FPXH63-16 074581 TGL 38502/06 Diameter: Ø 80 mm 5 Cutting with one holder each for inserts SK40 New Dimensions: 195 x 80 x 80 mm
used
face milling cutter, slip-on milling cutter, milling head WMW, SMALCALDA FPR125 diameter: 125 mm number of cutting edges: 8 diameter base body : 145 mm height: 50 mm with cutter mandrel SK40 used, tested ! dimensions ( cutter ): Ø 145 x 205 mm
used
Inserter FRANCOTYP-POSTALIA FPi 5600, 5 feeders, 2 feeder trays missing, envelopes approx. 4000 letters per hour, fold type: single, double parallel, Z and wrapping fold
used
Inserter FRANCOTYP-POSTALIA FPi 5600, 2 feeders, envelopes approx. 4000 letters per hour, fold type: single, double, parallel, Z and fold, vertical tape tray
used
Bimetallic relays, overcurrent relays, thermal relays, three-pole MOELLER Z 4-180 140 - 180 A 500 V AC for mounting on power contactors ! New ! Dimensions ( bimetallic relay ) : 145 x 140 x 140 mm Dimensions ( packaging ) : 160 x 145 x 145 mm
used
Swivel actuator, double-acting FESTO DRRD-32-180-FH-Y9A 1578518 Swivel angle: 180° Size: 32 p: 2 - 10 bar 2x Shock Absorber: DYSD-16-15-Y1F New ! with documents ! Dimensions: 243 x 94 x 56 mm
used
Compact cylinders, pneumatic cylinders, double-acting FESTO ADVULQ-32-180-A-P-A 156148 piston diameter: Ø 32 mm stroke: 180 mm rods: 16 x 16 mm rod thread: M16 x 1,5, Length: 30 mm max. 10 bar with clevis head: 17 mm, bolt: Ø 16 mm used, tested ! Dimensions: 335 x 108 x 138 mm
used
Compact cylinder, pneumatic cylinder, double FESTO ADVU-32-180-A-P-A 156044 piston diameter: Ø 32 mm stroke: 180 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm max. 10 bar used, tested ! Dimensions: 255 x 50 x 72 mm
used
Belt cylinder FESTO DGP-40-1800-PPV-A-B 161782 stroke 1800 mm piston diameter Ø 40 mm Dimensions: 2015 x 80 x 85 mm
used
Drive wheel WHEELS - VOGEL 180 / 60 - 150 RV 5450 0180 00 wheel diameter: Ø 180 mm rim diameter: Ø 150 mm tread width: 60 mm shaft diameter: Ø 40 mm New ! Dimensions: 180 x 180 x 60 mm
used
Machine foot, leveling foot PAGUS Ø 180 mm x 110 mm Base diameter: Ø 180 mm Support height: 130 mm Machine foot height: 110 mm Screw head height: 20 mm Thread length: 65 mm Thread: M27 x 1.75 Width across flats: 36 mm Material: Steel used, tested ! Dimensions: 180 x 180 x 130 mm
used
optical rotary table, rotary table, round table, round table, circular table PAGUS Ø 180 mm table diameter: Ø 180 mm 90° tiltable table height: 165 mm groove size: 10 / 18 mm groove depth: 19 mm groove length: 60 mm centering hole in table: Ø 17 mm ( continuous ) / Ø 25 mm, depth: 5 mm used, tested ! Dimensions: 430 x 395 x 180 mm
used
Transnorm Curve Roll Track 180° 700-600 IR 1500 RA1222 The Transnorm Curve wheel conveyor is from 2005 and is in a very good (used) condition. Columns are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 3215 Curve Roll Track 180° Built: 2005 Condition: very good (used) Angle: 180° Inner radius (IR): 1500 mm Nominal/outer width (NB): 700 mm Usable width (NUB): 600 mm Weight: 200 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports Priceplus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Features: Construction year: 2005 condition: very good (used) Nominal / inner radius in mm: 1500 Nominal / outside width in mm: 700 Roll width in mm: 600 angl ...
used
Offer Stephan micro-cut type: MCHD 180 year: approx. 2003 -Drive: 95 KW - 50 Hz - output per hour worked: approx. 2500-up to 8500 kg (product dependant) funnel version with screw on the motor shaft - cutting set diameter: 180 mm - including a new set of cutting (cutting heads: level 1, Z 24;) Level 2, no. 24) (cutting rings: 2 x MCH-D 180, gap size on request from 0.2 mm to 3.0 mm) price of the machine including a new blade set: 42.900,00. Price 34.900,00 the machine without a blade. Warranty: 3 months, excluding wear parts electro-no metal abrasion
used
Muffler, filter, 6 pieces RIETSCHLE, GARDNER DENVER 84 x 84 x 180 307442 Inner diameter: Ø 50 mm Please inquire about other quantities New ! Dimensions ( one filter ): 180 x 84 x 84 mm Dimensions ( packaging ): 255 x 170 x 180 mm
used
Tilting table, clamping table, sinusoidal table PAGUS Clamping area: 250 x 180 mm approx. 120° tiltable 2 grooves 10 / 18 x18 mm Base plate: 250 x 180 mm Groove in base plate: 14 x 5 mm used, tested ! Dimensions: 320 x 180 x 85 mm
used
Datasheet Transnorm Roller Curve Conveyor 180° RIGHT 770-700 IR 800 RA1253 The Transnorm roller curve with side guides is from 1994 and in a good (used) condition. It has a mid-engine of the brand SEW with MOVIMOT inverter. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Transnorm Type: TS 2712 curved belt 180° RIGHT Built: 1994 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 770 mm Clamping length: 700 mm Side guide: inside and outside Engine Type: SEW Gear Motor + MOVIMOT Inverter Engine Power: kW 0.37/0.075 S1 Hz 50 A 1.30 Drive: Center drive Conveyor speed: adjustable from 2 to 90 m/min Weight: 210 kg Scope of delivery: without supports (if necessary please enquiries)? Payment: after invoicing with advance payment Delivery time: a ...
used
Heavy duty roller, polyurethane heavy duty wheel, PU wheel PAGUS wheel diameter: Ø 180 mm wheel width: 50 mm for shaft diameter: Ø 35 mm Shaft length in wheel: 50 mm groove width: 10 mm New Dimensions: 180 x 180 x 50 mm
used
Circular saw blade, segmental saw blade, carbide LEUCO 180x6.0/5,0x65 209010-80258445 2135179 Ø 180 mm 40 teeth Width of teeth: 6.0 mm saw blade thickness: 5.0 mm Bore: Ø 65 mm bolt circle: Ø 90 mm suitable motor: EM578 ! used, tested ! Dimensions: 180 x 180 x 10 mm ,
used
Pneumatic swivel actuator, double-acting FESTO DSR-25-180-P 11911 Operating pressure: 2 - 8 bar adjustment range Swivel angle: 0 - 180 ° swivel angle: 0 - 180 ° Shaft diameter: Ø 12 mm Wavelength: 30 mm Groove width: 4 mm 1x Position sensor: IFM IE5090 IEB3001-BPKG/US approx. 0.0. 5 m cable with plug used, checked! Dimensions: 140 x 100 x 95 mm
used
Submersible pump, Coolant pump, Emulsion pump, Brinkmann ( Unfortunately without nameplate ) Immersion depth: 180 mm pump foot: Ø 145 mm pump flange: Ø 180 mm motor: approx. 1.1 kW 220/ 380 V 3AC 50 Hz used, tested ! Dimensions: 445 x 290 x 180 mm
used
Face plate, clamping plate PAGUS external Ø: 180 mm height: 32 mm bore: Ø 16 mm, depth: 32 mm Groove width: 8 / 18 mm Groove length: 65 mm Groove depth: 16 mm flange: Ø 130 / 102 mm bolt circle diameter: Ø 115 mm 3x threaded hole: M8 x 1.25, depth: 20 mm used, tested ! dimensions: 180 x 180 x 32 mm
used
Turning table, 180 Locking table, rotary table with aluminium plate Positioning table, rotary table, round dividing table 180 Turntable: 1080 mm Height to top edge Turntable: 630 mm - Turntable made of 25.5 mm thick aluminium plate with various holes - Very stable bearing turntable, rotatable by hand- 2 index locking positions 180, manual via foot lever for unlocking - stop damper under the turntable for the locking positions - very stable steel substructure - Flange plate steel substructure L x W x H = 600 x 600 x 20 mm Space requirement x H: 1080 x 630 mm Weight: 210 kg good condition 2 pieces available, price per piece; used
used
Stephan Emulsifier / micro-cut Type: MCH.D 180 year.: approx. 1993 capacity per hour: approx. 2500-up to 8500 kg (product dependant) funnel version With feeding screw on the motor shaft Cutting set diameter: 180 mm including new blade sets. Cutting head: level 1, Z 24 Cutting ring: level 1, gap of 0.2 mm to 3.0 mm. Cutting head on request: level 2, Z 24. Cutting ring: level 2, gap size on request from 0.2 mm to 3.0 mm. price of the machine: 32.900,00 with new blade sets; 24.900,00 without blade sets. Emulsifying, cutting without metal abrasion!
used
2 pieces curve belt conveyor 180 degrees, helix for climbing bands with SEW - used -: Price per piece from location: 2.995.-€ (net)! Manufacturer: Transnorm Type: 1600-105 Helix Built: 2011 Conveyor curve 180 degrees Nominal radius: 600mm Rated width: 700mm Condition: good Available: now Location: Bautzen warehouse
new
Filter for AD 180 - New - Prefilter AD-180 A1030163 Article-No. MA-201013
used
Outer D.: 27.8mm Inner D.: 15,5mm Length: 180 mm Contact pressure: 180/200 kg More then 300 machines new and second hand on our seema .de
used
Mains filter module AMK, LGF FILTER AF 180 200662 LGF number: FFU 3x180 K-K1 3x 480 V AC 180A 50 / 60 Hz used ! Dimensions: 450 x 130 x 180 mm
used
Standard luminaire, universal luminaire, enclosure luminaire RITTAL SZ 4138.180 ( SZ4138.180 ) 18 W 230 V 50 Hz IP20 without bulbs ! used, checked ! Dimensions: 680 x 120 x 50 mm
used
Standard luminaire, universal luminaire, control cabinet luminaire, 2 pieces RITTAL SZ 4138.180 ( SZ4138.180 ) 18 W 230 V 50 Hz IP20 2x door position switch SZ 4315.520 2x door position switch SZ 4127.010 with cable and bulb ! used, checked ! Dimensions ( one luminaire ): 680 x 120 x 50 mm Dimensions ( packaging ): 700 x 100 x 120 mm
used
Machine vice WMW 160 mm Jaw width: 160 mm jaw height: 50 mm wingspan: 0 - 180 mm used, tested ! Dimensions: 470 x 180 x 135 mm
used
Rotary actuator, swivel motor HSK-DREH-ANTRIEBE Gmbh HDZ63-10/180°D Art.-No.: 0312860 - H 96543.53 Swenk angle: max. 180 ° p: max. 210 bar shaft diameter: Ø 35 mm flange diameter: Ø 128 mm used ! Dimensions: 315 x 130 x 155 mm
used
tilting table, clamping table, sinusoidal table PAGUS clamping area: 250 x 180 mm approx. 90° tiltable 2 grooves 10 / 18 x18 mm 1 groove 14 x 5 mm base plate: 200 x 180 mm groove in base plate: 16 x 5 mm used, tested ! Dimensions: 300 x 250 x 80 mm
used
Bearing block, counter bearing for milling spindle WMW Ø 84 mm x 180 mm Bearing diameter ( inside ): Ø 84 mm Distance spindle center - upper edge dovetail: 180 mm dovetail guide: 218 / 168 mm, height: 37 mm, width: 153 mm Bearing base: 340 x 153 mm material (housing): Aluminium used, tested ! Dimensions: 400 x 155 x 290 mm
used
Bearing block, counter bearing for milling spindle WMW / PAGUS Ø 84 mm x 180 mm Bearing diameter ( inside ): Ø 84 mm reduction Diameter ( inner ): Ø 22 mm Distance spindle center - upper edge dovetail: 180 mm dovetail guide: 214 / 164 mm, height: 37 mm, Width: 153 mm Bearing base: 340 x 153 mm Material ( housing ): Aluminium used, checked, very good condition ! Dimensions: 400 x 155 x 280 mm
used
Bearing bracket, counter bearing for milling spindle WMW / PAGUS Ø 84 mm x 180 mm Bearing diameter ( inside ): Ø 84 mm Distance spindle center - upper edge dovetail: 180 mm dovetail guide: 218 / 166 mm, height: 36 mm, width: 153 mm bearing foot: 340 x 153 mm material (housing): Aluminium used, tested ! Dimensions: 400 x 155 x 280 mm
used
tilting table, clamping table, sinusoidal table PAGUS clamping surface: 250 x 180 mm table height: 78 mm approx. 50° tiltable groove width: 10 / 18 mm groove depth: 17 mm Base plate: 305 x 180 mm Mounting holes in base plate: Ø 14 x 20 mm ( U-shape ) used, tested ! Dimensions: 305 x 230 x 80 mm
used
Submersible pump, chemical pump, water pump, centrifugal pump SONDERMANN RT-PP-14/180-0,75/3-400 Qmax.: 180 l/min ( 10,8 m3/h ) Hmax.: 14 m Immersion depth: 400 mm Impeller diameter: Ø 130 mm pump flange: 275 x 220 mm Material: PP / VITON Motor: 0.75 kW 230 / 400 V 3AC 50 Hz IP55 used, checked! Dimensions: 620 x 280 x 250 mm
used
Bearing flange, bearing bracket DECKEL Housing diameter: Ø 180 mm bolt circle (housing): Ø 140 mm shaft diameter: Ø 32 mm Flange diameter: Ø 70 mm bolt circle (flange): Ø 54 mm spare part for milling machine DECKEL KF12 ! used, tested ! Dimensions: 175 x 180 x 185 mm
used
Retaining ring, 18 pieces PAGUS Size 180 x 4 similar to DIN 471 for shaft diameter: Ø 180 mm (nominal diameter ) thickness: 4 mm Material: spring steel Other quantities on request ! New ! Dimensions ( retaining ring ): 204 x 204 x 4 mm Dimensions ( package ): 210 x 210 x 80 mm