128,848 used machines on RESALE, but how to find them? Machine Search
Labeler, make Krones, type: Vinetta 6-3-3/180, control range: 1.700 - 4.800 bph, for 0,7/0,75 lt and 1,0 lt bottles, with 2 stations for body-, shoulder- and back label, direction: right->left, built 1985
Headop Automatic Feeder With 4 x 4 Openings Opticontrol for pile control Siemens electronic control Job memory Automatic sheet change Lap opener Mechanical opening Colour touch screen Maximum sheet size 510 x 320 mm - 150 x 75 mm 10 x stitches Speed : 180 cycles per minute
Rietschle side channel blowers 1.5 kW 170 / 200 (max.) m³/h
ID3685 Landbanden/Country conveyor belts Approx. 180m of conveyor belt for 650mm belt width, consisting of 30 hot-dip galvanized conveyor belt profile joints in profile heights of 120mm (9 pcs) and 100mm (21 pcs), 1 drive station with Stiebel 18.5/22kW gearbox with a gear ratio of i=11.6:1 - drum diameter 430mm - conveyor belt speed v= 2.68 m/s, 1 reversing station - drum diameter 330mm, 150 roller chairs, three-part, plus mounting screws approx. 180 m of land belt road for 650 mm belt width consisting of 30 pieces of land belt profile joints, hot-dip galvanized, in profile heights of 120 mm (9 pcs) and 100 mm (21 pcs), 1 piece of drive station with Stiebel slip-on gearbox 18.5/22kW with gear ratio i=11.6:1 - drum diameter 430 mm - conveyor belt speed v= 2.68 m/s, 1 piece of reversing station - drum diameter 330mm, 150 pieces of roller chairs, three-part plus fastening screws
width: 800 mm depth: 380 mm height: 1800 mm weight: 70 Kg Tool cabinet from sheet steel split in the middle. Width of 100 cm. with 2 sliding doors and adjustable shelves 8 Brand new item with minor defects. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drive gear to mains belt furnace NBO Winkler from spare parts warehouse unused
Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...
Machine type MIG/MAG inverter welding system Make RILAND Type MIG 180PGDM Supply voltage 1 x 230 volts Adjustment range 15 – 180 amperes Duty cycle 20 % ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly system version Wire feed gearbox 2-roller gearbox Fuse 16 Ampere Dimensions L x W x H 386 x 170 x 300 mm Special accessories TIG welding DC without HF E-welding Weight 8 kg Age 2 years As good as new Scope of delivery welding system with the following accessories: 1 piece welding torch MB 24, 2 mtr. Long 1 piece pressure reducer argon 1 piece ground cable 3 mtr. long, 16 sq m 1 piece electric welding cable 3 mtr. long, 16 sq m 1 piece of aluminum equipment 3 power nozzles aluminum, 1.0 mm Ø 3 pieces of current nozzles stee ...
; Gross weight [kg]: 1237; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 219
Inv. Num. : 6549 Type: KS 1800-10 Producer: Gehring Generated: Parameters: Honing diameter: 10 mm Machining length: 1800 mm
Details Built in 1960 Type KW180 Accessories Multifix Steel Holder Collet chuck including sleeves Vises in the pictures are not included The Martin lathe from 1960 is characterized by its solid construction and high precision. It is ideal for a wide range of filming tasks and offers a high degree of flexibility thanks to its extensive range of accessories. It is ideal for workshops and manufacturing plants that value quality and reliability. The KW180 lathe is robust and durable. It was built in 1960 and is in good condition despite its age. The lathe comes with a wide range of accessories. This includes a Multifix steel holder, which enables quick and easy tool changes. A collet chuck including sleeves is also part of the accessories and expands the possibilities of the machine. Please note that the vices shown in the pictures are not included in the scope ...
TECHNICAL SPECIFICATIONS Manufacturer: FLYGHT (XYLEM) Designation: Construction pump (submersible pump) Series: 2660.180 Type: B 226 MT Year of construction: approx. 2015 head: approx. 35 m flow rate: approx. 50 l/s Nominal data: 10.0 kW / 19.0 A Voltage: 400 V / 3 phases Start type: direct Pressure connection: F-Storz Motor protection plug: 32 A Water protection class: IP68 diving depth: 20 m Weight: 78 kg Height: 853 mm Diameter: 346 mm Screen opening: 10 mm
; Gross weight [kg]: 1918; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 349
We offer a paternoster LTG-TowerMax P 2.4-120-20-380-4780 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 4,780 mm Overall width 3,385 mm Overall depth 1,180 mm 20 carriers with a payload of 120 kg each in clear usable dimensions: H = 380 mm W = 2,950 mm T = 410 mm Chain jump 412 mm 20 galvanized intermediate floors for 55 kg payload each Total payload up to 2,380 kg Side table in 1000 mm above OKFF with wooden worktop, 300 mm deep, manually operated lifting door Colour scheme grey/grey, supporting cases anthracite Motor power drive 1 x 1.8 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
2 units available / single purchase possible TECHNICAL SPECIFICATIONS Manufacturer: FLYGHT (XYLEM) Designation: Construction pump (submersible pump) Series: 2670.180 Type: B 226 MT Year of construction: approx. 2015 head: approx. 40 m flow rate: approx. 90 l/s Nominal data: 18.0 kW / 32.0 A Voltage: 400 V / 3 phases Start type: Star triangle Pressure connection: F-Storz Motor protection plug: free cable end Water protection class: IP68 diving depth: 20 m Weight: 141 kg Height: 955 mm Diameter: 395 mm Screen opening: 12 mm
DEHUMIDIFIER MUNTERS ML 180 Desiccant dehumidifier with air-cooled condenser. Designed to efficiently dehumidify unheated enclosed spaces, with operating hours counter. Stainless steel sheet exterior, one-piece, fully corrosion-resistant plastic, with interchangeable front and rear panels for easier installation. Built in 2009. FEATURES - operating temperature: +0 / +25 °C - dehumidifies up to -20 °C - dehumidifies up to low dew point - IEC Protective class (unit): IP33 - IEC Protective class (electrical panel): IP54 - Sound power level to room Lw(A) dB (all inlets and outlets ducted): 75 dB(A) - Filter class: G3 Process Air - Rated airflow: 180 m3/h - Available static pressure: 200 Pa Reactivation Air - Rated airflow: 67 m3/h Condenser - Sensible heat: 1.4 kW - Fan power: 0.3 kW - Rated airflow: 650 m3/h - Available static pressure: 200 Pa ...
Vibro discharge tray Bosche BVA 1800/30, EX, No. 07-6711-02.22.2, 0.8 kw at 1500 rpm Discharge approx. ø 370 mm Installation height height approx. 850 mm Outlet valve pneumatic 24V Very good condition 4 piece(s) in stock and immediately available
For sale are used KALT cheese vats: Manufacturer: KALT Year of construction: 2001 and 2004 Design: closed, double-O Material: Exterior: Stainless steel (V2A) Inside: Copper Includes control cabinet and Siemens HMI (touch panel)
Pressure: 14 bar Motor: 1,51 kW Free air delivery: 18 m³/min Measurement (WxHxD): 700 x 1360 x 1150 Weight: 210 kg Compressed air connection: 2
continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed
Stud welding robot for thread M5 (convertible) KUKA KR 180 KRC2 complete Control: KRC2 Number of axes: 6 Max. payload: 180 kg Max. working range: approx. 2700mm Year of construction: 2003 Scope of delivery: robot, controller, cable, teach panel, circuit diagrams, stud welding machine
Angle grinder, cutoff grinder -Grinding wheels: Ø 180 mm -Power: 2300 W -Speed: 8500 rpm -Dimensions: 525/180/H140 mm -Weight 6.5 kg
Spiral mixer, Fabr.Diosna, SP 180 AD
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool: 26° -Drawing: in the photos -Dimension: 13 x 180 mm -Length: 45 mm -Weight: 0.7 kg
Clamping plate, measuring plate, measuring table, optical measuring device, altimeter, measuring table -Measuring table: with optical measuring device and altimeter -Width: 695 mm -Length: 1800 mm -Height: 1775 mm -Weight: 444 kg
Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 4820 mm F ...
Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1900-1800-550 RA1149 TYear of manufacture 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 / 1800 mm conveying length: 1900mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 1900 Nominal / outside width in mm: 1800 Roll width in mm: 550 Driven: YES Conveyor speed m / s: 0,35 For individual, profess ...
Hacksaw, hacksaw machine -Hoop saw: electric, with coolant system -Type: unfortunately no type designation -Power: 0.55 / 0.75 kW -Max. cutting height: approx. 145 mm -Max. cutting width: approx. 180 mm -Saw blade: Length approx. 325 mm -Machine dimensions: 800/700/H1520 mm -Weight: 224 kg
Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1800-1220-550 RA1148 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 / 1300 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 1800 Nominal / outside width in mm: 1220 Roll width in mm: 550 Driven: YES Conveyor speed m / s: 0,35 For individual, professional advice, simply cont ...
pressure: 180 t stroke: 400 mm column daylight: 1500 mm Frame Width: 550 mm distance spindle /table: max. 1000 mm total power requirement: 7,5 kW weight of the machine ca.: 2100 kg dimensions of the machine ca.: 2300x1200x2850 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 8 mm, 1
Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...
Stick electrodes 3.2 x 450 -Type: KESTRA Fe Ti 180 -Price: per package -Number: 3 packages -Weight: 5.9 kg
Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 250/180 mm -Height: 30 mm -Number: 3x pillows available -Price: per piece -Weight: 2.2 kg/piece
Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Shears: 200 mm -Dimensions: 350/100/H710 mm -Weight: 17.6 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: adjustable from 75 to 180 mm -Recording: MK2 -Dimensions: 275/240/H260 mm -Weight: 22.5 kg
Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine -Width: 200 mm -Length: 1800 mm -Height: 45 mm -Groove width: 11 mm -Weight: 117 kg
Three-phase motor with 2 speeds, electric motor -Power: 5/18 kW -Speed: 725/1460 rpm -Shaft: Ø 48 mm -Design: B3 -Protection class: IP 54 -pole-reversible -Dimensions: 710/350/H450 mm -Weight: 179 kg
Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock comes: from a lathe -Tip height: 180 mm -Recording: MK4 -Dimensions: 540/250/H310 mm -Weight: 65.5 kg
new spiral mixer Masz SMR 180 extendable, year of construction 2023, 120 kg dough, 2 clocks, stainless steel spiral, with 1 stainless steel kettle, if necessary with 1 additional kettle for an additional 3,800€, Fabr.-No. 121323, boiler diameter 75 cm, 6.8 kW, 50 Hz, 400 V, external dimensions 149 x 87 x 128 cm, weight: 549 or 726 kg
Swivel drive, pneumatic cylinder, rotary vane drive, swivel module -Type: DSR-16-180-P -Shaft diameter: 10mm -Number: 1x available -Dimensions: 78/78/H57 mm -Weight: 0.3kg
Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 204 x 42 mm -Clamping depth: max. 180 mm -Dimensions: 480/340/H165 mm -Weight: 55 kg
maximum number of results exceeded
please refine your search
