180 fp used for sale

new spiral mixer Masz SMR 180 extendable, year of construction 2023, 120 kg dough, 2 clocks, stainless steel spiral, with 1 stainless steel kettle, if necessary with 1 additional kettle for an additional 3,800€, Fabr.-No. 121323, boiler diameter 75 cm, 6.8 kW, 50 Hz, 400 V, external dimensions 149 x 87 x 128 cm, weight: 549 or 726 kg

Moving bezel, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, steady rest from lathe M4L -Max. Passage: Ø 180 mm -Center height: 315 mm -technical drawing: with the photos -Dimensions: 520/535/H560 mm -Weight: 32 kg

Toggle plug, anchor hook -Manufacturer: Würth, Toggle dowels 25 pieces/box -Type: W-KDW M10x180 -Number: 27 boxes available -Price: per box -Dimensions cardboard: 270/210/H100 mm -Weight: 3kg/carton

Toggle dowels, anchor hooks -Manufacturer: Würth, tilt dowel -Type: W-KDW M10 x 180 -Condition: according to pictures without tilting plate -Quantity: 11 pieces available -Price: per piece/minimum order 5 pieces -Weight: 0.1 kg/pc.

Heidenhain RON 255 C-18000 ID.-No. 358 697-70 Incl. test report from Heidenhain Replacement part not required

We sell here a cooking system from the manufacturer ASCA Consulting in a very good used and functional condition. The system is built in 12/2014, electrically heated, 400 volts, 20 kW, chamber volume 1800 litres, Aditec MKA 110 control, workshop tested, ready for immediate use, dimensions W/D/H 170/140/255 cm, others on request.

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Hanger bolts: solar fasteners 49 pieces -Type: M10x180 -Price: per piece / minimum purchase 10 pcs. -Weight: 0.1 kg/pc.

Bosch starter motor -Manufacturer: Bosch starter motor 12 V, unfortunately without type designation -Voltage: 12 V -Teeth: 10 -Solenoid coil: Type 0331402502 -Dimensions: see photos -Overall dimensions: 340/180/H115 mm -Weight: 13.8 kg

TIG welding machine -Nimak electrode unit -Dalex converter -Hose package -ground cable

WTT 180° degree roller cam 640-600 IR500 RA1803 Technical data: Framework width (NB): 640 mm Roll width (EL): 600 mm Roller pitch: 5:6 Rolls: 50mm, galvanized pitch (Tlg): 105 mm Conveying angle: 180° degrees Inner radius (IR): 500mm Overall height (BH): 80mm top edge of rollers Side guide outside: 185mm Drive: without Supports: without Construction: frame painted gray, rollers galvanized Optionally available: Supports: 70,00 Euro plus VAT / piece All prices plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Nominal / inner radius in mm: 500 Nominal / outside width in mm: 640 Roll width in mm: 600 (Nutzbreite) angle: 180° Driven: NO scope of delivery: without supports For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning ...

Transnorm belt curve conveyor left GKF 180°-775-600 IR500 RA2013 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and Side guides are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 775 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 500 mm Conveying angle: 180° degrees support feet ...

Handfeeding station 8 stations gatherer automatic loading system Aster 180 sewing machine age 2008 Plus Stacker Technical details : minimum size : 150x100 mm maximum size : 420x320 mm speed : 180 cycles/minute available immediately

Lippert belt conveyor GF 18000-770-650 RA2246 Technical data: Conveyor length (NL): 18000 mm frame width (NB): 770 mm belt width (GuB): 650 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 18000 Nominal / outside width in mm: 770 Belt width in mm: 650 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Hydraulic cylinder: double-acting stroke 180 mm -Piston rod: Ø 65 mm -Cylinder: outside Ø 120 mm -Dimensions: Ø 120 x 340 mm -Weight: 16kg

Used bread line GLIMEK -In good bakery condition- - Dough divider GLIEMEK SD-180 with XL funnel - Intermediate oven IPP840-008 - Long caster GLIMEK M0671 - Rounder - Capacity: approx. 1,500 pcs./h The plant has only been running for 10 years and only in the summer season. Out of service since 2017. Viewing and test run are possible by arrangement.

Crane block, pulley, rope pulley, steel rope pulley, rope pulley, crane, pulley, rope pulley with pulley block, wire rope pulley block -Rope pulley: Rope pulley 1 grooved 200/1 with bearing -Rope width: mm -Receptacle: Ø 45 mm -Quantity: 1x pulley available -Dimensions: Ø 186 x 32 mm -Weight: 2.7kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Tube diameter outside: 180 mm -Piston: Ø 115/145 mm -Stroke: 620 mm -Weight: 87 kg

Workbench, work table, assembly bench, assembly table, work table, wooden workbench table -Workbench:Wooden workbench table -Width: 1800 mm -Depth: 800 mm -Height: 850 mm -Quantity: 2 pieces -Price per piece -Weight: 30 kg

SECOND-HAND FILTERING PLANT CM MOD. FST 180M - 180 bags mm 200x2500 - static filter - main motor 40 Kw - year 2008 - capacity 30.000 mc/h - CE rules

1Head Paper Drill

Bezel, moving bezel, bezel, steady rest, lynette -Bezel: moving -Tip height: 180 mm -Plating: Brass -Dimensions: see photos / technical drawing -Dimensions: 340/70/H380 mm -Weight: 6.3 kg.

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley -V-belt width: 17 mm -Mounting: Taper bushing Ø 40 x 30 mm (can be changed) -Dimensions: Ø 187 x 44 mm -Weight: 5.7 kg

V-belt pulley, belt pulley -V-belt pulley: 4-groove pulley -V-belt width: 22 mm -Hole: Ø 42 x 112 mm -Dimensions: Ø 180 x 130 mm -Weight: 8.3 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns -Punching dimensions: see photo -Dimensions: 180/75/H1100 mm -Weight: 2.0 kg

The press is function with two adaptor Pressing force max. kN 1800 Pull-off force max. kN 1500 Counterholding force kN 1200 in pressing position Upper punch stroke mm 220 Filling height max. mm 180 Pull-off travel max.mm 90 Pressing path max. mm 90 Distance of upper pressure max. mm 18 Drive motor kW 30 Stroke rate (infinitely adjustable) min-1 6-24 Pre-suspension. Distance max. mm 62 (surcharge). Force max. kN 5.3 Total height mm 4700 Total width mm 2360 without electricity Total depth mm 2700 Hydraulic unit Total weight, net kg 17000

Oil seal, shaft seal, radial shaft seal, sealing ring -Manufacturer: Freudenberg, Simmerring Baum / DIN A unused original packaging -Type: BAU7X2 180x210x15 -Art.No.: 40412511 / 1045 3053 72NBR902 BAU7 -Quantity: 4x shaft seals included -Packaging dimensions: 300/300/H30 mm -Weight: 0.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder double-acting stroke 180 mm -Piston rod: Ø 36 mm / M28 -Mounting: bolt circle Ø 118 x 8 mm -Dimensions: 380/140/H140 mm -Weight: 10.6 kg

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 45 mm -Dimensions: 220/180/H260 mm -Weight: 13.3 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

BOEHRINGER NG 180-2 CNC turning center was built in 2006 in Germany. This reliable and efficient machine performs precision machining of workpieces with a maximum diameter of 290 mm using a high-speed spindle and high-quality cutting tools taken from a 12-position turret. The entire turning process is performed with excellent stability, thanks to a vibration- and oscillation-resistant design made of high-quality raw materials. The BOEHRINGER NG 180 CNC lathe is controlled by an intuitive SIEMENS CNC control, whose excellent optimisation allows to maximise production efficiency. The total weight of the machine is 10000 kg. Technical specifications of the BOEHRINGER NG 180-2 lathe - CNC control: SIEMENS SINUMERIK - turning diameter: 290 mm - turning length: 850 mm - 12-position turret head - maximum spindle rotational speed: 4000 rpm - minimum spindle rotational speed: 10 rpm - d ...

Probst & Class/ K 180 EL GLEN-GK/ 2017/18 Colloidal mill 2 available, price per piece For vegetable for example carrots used, sold as it is, where it is, price ex location

table length: 2000 mm table width: 1800 mm table load: 12,5 t Travel: 1250 mm width of T-slots: 28 mm T - slots distance: 160 mm total power requirement: 6 kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: 3,7x2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: FANUC Series 0i-TC Number of spindles: 1 Equipment: C-axle, gantry loader, tailstock, tool holder

Electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LG4186-4AA60-Z 180L -Power: 22 kW -Speed: 1465 rpm -Protection class: IP55 -Shaft: Ø 48 x 110 mm -Design: B3 -Dimensions: 670/340/H440 mm -Weight: 152 kg

Electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor explosion-proof -Type: 180L-4 -Power: 22 KW -Speed: 1465 rpm -Shaft: Ø 48 x 110 mm -Design: B5 -Protection class: IP54 -Dimensions: 700/475/H350 mm -Weight: 219 kg

Clamping plate, marking-spotting plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, precision measuring table -Measuring table: precision measuring table -Clamping surface: 215 x 180 mm -Measuring stand: height up to 220 mm -Dimensions: 260 x 260 x H320 mm -Weight: 13.2 kg

Clamping device, clamp bracket, clamp clamp, clamping bracket, pipe clamp bracket, pipe clamp, pipe clamping system, mounting device for pipes, pipe quick clamp, pipe quick clamp -Pipe clamp: pipe quick release -Clamping range: Ø 40 to 180 mm, see photos -Dimensions: 230/120/H310 mm -Weight: 3.5 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 doors, solid construction with 8 drawers -Width: 1800 mm -Depth: 710 mm -Height: 2060 mm -Drawers/shelves: See photos for layout/height -Weight: 565 kg

Rotary actuator, pneumatic cylinder, rotary vane actuator, rotary module, pneumatic rotary actuator, rotary cylinder -Manufacturer: Festo, Rotary actuator type DRRD-16-180-FH-Y9A 1644389 -Rotation angle: 180° -Quantity: 1 available -Dimensions: 140/60/H30 mm -Weight: 0.6 kg

Inv. Num. : 7839 Type: SK 180MP/4 Produzent: AUTOMATICE Erzeugt: 2016 Parametern: Trichterlänge: 1200 mm Trichterbreite: 840 mm Motor: 18.5 kW Gesamthöhe: 3192 mm Länge: 2730 mm Breite: 1752 mm Ofengewicht: 3100 kg

for 180 lit , with lifter

Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 300 x 180 mm -Quantity: 1x angle stop available -Dimensions: 305/180/H20 mm -Weight: 0.6 kg

Indexer, indexing gear, cam indexer, rotary table indexer, rotary indexing drive -Manufacturer: Candex, cam indexer -Type: RU45DFS-02-180-2RX-CN -Shaft: Ø16 mm / 2x Ø14 mm -Translation: 1:2 -Dimensions: 160/150/H130 mm -Weight: 5.2 kg

electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LG4186-4AA60-Z 180L -Power: 22 kW -Speed: 1455 rpm -Protection class: IP55 -Shaft: Ø 48 x 110 mm -Design: B5 -Dimensions: 720/350/H450 mm -Weight: 184 kg

Rachner Pile Turner F 1800 PA / R+S Completely overhauled, large opening width, 1800 mm Platform size 800 x 1270 mm with pile ventilation and vibrator. Technical condition almost as good as new after overhaul. ( 2024 ) Inspection and testing are possible at any time.

Pinacho Lathe S-90/180 - With digital display - Width: 200 cm - Depth: 85 cm - Height: 160 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Pile turner Rachner F 1800 PA/RS; Condition obsolete; Platform size 800x1270mm; Opening width 1800mm; Vibration function; Blowing air with extra large blower 7.5KW; Side ruler; Load capacity 1000kg. Pile turner Rachner F 1800 PA/RS; condition rebuilt; size 800x1270mm; max.pile hight 1800mm; jogging; airing with big blower 7,5KW; adjustable aligning gauge; carrying power 1000kg.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt roller: Transport roller with bearing block and drive wheel -Roll: Ø 99 x 1800 mm rubberized -Shaft: Ø 35 x 200 mm -Dimensions: 2200/200/H150 mm -Weight: 31 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt roller: Transport roller -Roll: Ø 100 x 1800 mm -Shaft: Ø 23 x 200 mm -Quantity: 3x transport rollers available -Price: per piece -Dimensions: Ø 100 x 2200 mm -Weight: 13 kg/pc.

-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 100 kg