129,377 used machines on RESALE, but how to find them? Machine Search
Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1823; Gross weight [kg]: 1823; Engine: F34.TEVP01; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 450
Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 5305; Gross weight [kg]: 5305; Engine: CR16TE1W; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 740
Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 4710; Gross weight [kg]: 4710; Engine: C13TE7; Front tyres remaining: 538; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 597
Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Power [PS]: 230; Transport weight [kg]: 4710; Gross weight [kg]: 4710; Engine: C13TE7; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 597
Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Power-operated tool clamps horizontally and vertically - Automatic speed manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual ...
Brand Lisec Type Butyl extruder machine Model LBH-25ARS + 2x RAV2 Serial number 572-003937 Year of construction 2000 Weight 2.1ton Assets 7kVA Air pressure 6bar Water pressure: NVT Length +/- 11m Width +/- 5m Height +/- 3.5m Working height ,4m Transport dimensions L x W x H Special 2 pcs 3.5×2.6x2m + 6×1.5×3.2 Min.-max. profile 4-15mm Min.-max glass size 2.5×3 Number of brushes n/a Number of spindles n/a State machine n/a Type of control B&R Electrical connection 380+N+PE Instructions for use Yes Electrical diagram Yes Parts list available on request Available software back up Photos/film available: Photos and video available
Specifications Manufacturer: Saeilo Type: FP3-A Control: Contur M Year of Make: 2021 Travels: X 400 mm Y 300 mm Z 375 mm Clamping area: 400 x 800 mm Speed: 50 – 2,000 rpm Tool holder: SK40 Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included Coolant Setup Table cabin Electronic handwheel Hydraulic tool clamping Machine Light
Key data: 14000 mm, 1500 mm, 3000 mm
Stock number 1110049 Machine Type: CNC Long Bed Milling Machine Make FPT Type Spirit 130 Year of construction 2012 Control type HEIDENHAIN TNC Itnc 530 X-off (mm) 14,000 Y-displacement (mm) 1,500 Z-off (mm) 3,000 Speeds of (rpm) max. 4,000 Tool holder Iso 50 Rapid traverse max 25,000 mm/min Tool changer for 60 tools in really top condition and the machines can be demonstrated under power Information: CNC Control One 29,766 hours Program leach 9655 hours
x-travel: 1.750 mm y-travel: 1.400 mm z-travel: 550 mm Control: SIEMENS Sinumerik 840D sl Working area: : surface area: 1.000 x Ø1.200 mm max. workpiece weight: kg Feeds: : X-, Y- and Z-axis, stepless: mm/min rapid travel x/y/z: mm/min : : Constant Power at 100 % ED: 18 kW torque: 80 Nm turning speeds: 18.000 U/min : +/185° Direct Drive tool taper: HSK A63 tool changer: 60 fach dimensions of the machine ca.: 6,2 x 3,8 x 4,3 m total power requirement: 50 kW weight of the machine ca.: 20 t Equipment and accessories • Compact portal milling machine STINGER180 - Installation without contoured foundation • CNC control Siemens SINUMERIK 840D solution line • TULCE HSK-63A head with integrated, direct-driven A-axis • Stepless and endlessly rotatable milling table Ø1,200x1,000mm • Omlat spindle, max. speed 18,000 min-1 • Axis drives via precision ball screws and digital servo ...
Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.
Various laboratory devices are available for quality testing in the textile industry. 1) Textile tensile tester Textechno FPA ME, year of manufacture: 2000, max. speed of pull-off clamp: 5000mm/min, clamping dimensions X/Y: 46mm/10mm, clamping pressure 3bar/5bar/8bar: 1200N/2000N/3200N, max. clamping distance: 960mm, force transducer: E 10N/E100N/E1000N, accuracy: +/-1%, machine dimensions X/Y/Z: approx. 885mm/700mm/1730mm, weight: approx. 200kg, control: Textechno Bus. 2) Illuminated table White Screen Normlight, lighting: 3x 36W, machine dimensions X/Y/Z: approx. 1250mm/800mm/850mm. 3) Textile length measuring machine Yuan More YG086, year of manufacture: 2011, measurement: linear yarn density, yarn count: 1-6, frame circumference: 1000mm (+/-1mm), frame speed min./max.: 30r/270r/min, max. yarn frame turns: 9999, yarn traverse stroke: 35mm (+/-0.5mm), single yarn tension range: 0cN-100 ...
A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) ...
x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm table-size: 600x260 mm spindle taper ISO: 40 spindle turning speed range: 40-2000 U/min weight of the machine ca.: 700 kg Visit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. width of grinding wheel: 100 mm diameter / bore of grinding wheel: x mm Flange taper: x The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dormatec AirBench FPW209084P Premium The FPW extraction table is suitable for all types of contamination (metal, plastic, stone, wood, glue steam, etc.) thanks to a variety of filters. Dust, steam or smoke no longer get into the respiratory tract because they are immediately sucked out through the worktop. The downdraft tables are available in different sizes and configurations. All you need is a power outlet, plug and play! Structure of the FPW extraction table: - Industrial design - Robust welded filter housing made of 2 mm sheet steel - Steel surface made of 3 mm sheet steel - perforated slide. 4 mm - Powder coating in RAL 7035 (light grey) Features of the premium model: - Filters: Labyrinth & H14 HEPA (The filter type and technical design depend on the materials to be processed. The extraction table can be equipped according to all common requirements.) - Increased ...
x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 turning speeds: 6300 U/min tool taper: SK40 quill stroke: 80 mm table-size: 550 x 1000 mm table load: 0,6 t total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tool holder ISO 40, travel distances 800 x 300 x 400, 18 spindle speeds 40 - 2000, 18 feeds 10 - 500, rapid traverse, spindle motor 2.2 kW, Spindle backlash X-axis 0.3 mm, Y-axis 0.2 mm Bellows in X and Z axis new
A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible.
Key data: 300 mm, 150 mm, 300 mm
Universal Milling DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Spindle speed: from 40 to 2000 RPM Table size: 600 x 210 mm Horizontally tiltable head Straight table Spindle motor: 2 speeds Motor: 1,3 kW Feeds: X - Z auto / Y manual Voltage: 380 V Width: 1200 mm Depth with electrical panel: 1200 mm Height:1600 mm Weight: approx 900 kg
Milling machine DECKEL FP3 - 500x300x400 mm, DRO, Information about technical data are not binding., Machine available subject to prior sale, Working table size: 800x420 mm, Longitudinal travel x axis: 500 mm, Cross travel y axis: 300 mm, Vertical travel z axis: 400 mm, Spindle taper: 40 SK, Spindle speed: 40 - 2000 rpm, Number of spindle speeds: 18, Spindle motor power: 3 Kw, Quill spindle travel: 100 mm, Working feed x-z axes: 5 - 500 mm/1, Rapid feed x-z axes: 1.500 mm/1, Number of working feeds: 18, Weight: 1.200 Kg
Key data: 500 mm, 400 mm, 400 mm
Deckel FP 4M Active with 3-axis active digital display, Year of manufacture 1996 Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Very good condition!
Transport height range: 800mm-1000mm, buffer capacity: 10 blanks, blank length range: 70mm-460mm, blank width range: 50mm-460mm, blank thickness range: 0.3mm-3mm, max. individual blank weight: 2kg, max. total blank weight: 20kg, cycle time (FIFO): less than 15s. Machine dimensions X/Y/Z: approx. 1150mm/1400mm/1550mm, weight: approx. 400kg. Documentation available. On-site inspection is possible.
A total of three conveyor belts (transport modules) are available for the PCB industry. 1) Three-segment conveyor belt with buffer module Asys FPS 30, year of manufacture: 1996. 2) Transport module Rommel SM 600 T. 3) Transport module Rommel BM 500 S, year of manufacture: 2000. Documentation available. On-site inspection is possible.
Key data: 500 mm, 400 mm, 400 mm
FP 4M lid with 3-axis active digital display, Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Incl. accessories as shown
Flow rate: 143 m³/h Operating pressure test: 32 bar Motor: 11 kW - With connections: suction side DN 65 and pressure side: DN 80 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1020 mm Width: 520 mm Height: 1100 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.
- Chip conveyor - Laser tool setter - Portal Handwheel - Full A/B-Automatic head - High pressure coolant
SPECIFICATIONS: Rotary table: Ø 1500 mm Wrapping with stretch film Working height: max. 2900 mm Electronic adjustment Installed power: 3 kW
Lid FP4-MA Contur 2 with handwheel ( universal tool milling machine ) BJ 1987
- Head Pick up Station - CNC Indexing Micro Head 0.001 Gr - Spindle extionsion - Internal coolant system - ATC Chain Tool changer 60 Positions - Under power
Specifications: Manufacturer: Lid Type: FP1 active Control: Heidenhain Active TNC113 Year of Make: 1977 Colour: grey Travels: X 300, Y 160, Z 340 mm Spindle Speed: 40 – 2,000 rpm. Tool/movement Tool holder: SK40 (S20x2) Feed: infinitely adjustable Active feed: in X and Z axis Dimensions and weight Weight: approx. 800 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: The machine is in very neat original condition. Original lidded cabinet with various mounts and dividing head
Deckel FP5A CNC milling machine with Dialog 11 control. The machine is mechanically in good condition Stands in a hall almost rust-free. Accessories: Angle table
DECKEL FP 2 Tool Milling Machine Machine Details: Manufacturer: Lid Type: FP 2 Year of construction: approx. 1978 Condition: very good, technically tested and partially overhauled Availability: available on order The Deckel FP 2 is considered the reference among universal milling machines – robust, precise and reliable. Specifications: Travel: X-axis: approx. 400 mm Y-axis: approx. 200 mm Z-axis: approx. 400 mm Spindle: Speed range: approx. 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2 kW Tool clamping: manual Feeds: 8–400 mm/min Rapid traverses: approx. 1.5 m/min Digital display: 3-axis SINO Dimensions (LxWxH): approx. 2000 x 1500 x 1800 mm Weight: approx. 800 kg Equipment & Accessories: Vertical & horizontal milling equipment Drill quill 3-axis digital display SINO Coolant Setup Work light C ...
Travel X/Y/Z: 560mm/500mm/450mm, tool holder: SK40, speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min, table dimensions X/Y: 530mm/900mm, max. table load: 450kg. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg, control: Deckel Contour 2. An on-site inspection is possible.
General SKU300X420 LocationBarneveld MakeEmo TypeFPAC 800 No.EMO 1467 47-57-30-16 Year of construction2007 Dimensions Cake capacity630 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface46 m2 Specified Features - Filterpress Filter presscheck Filter surface46 m² Number of platens45 and 2 end plates Internal platen sizes730x730 mm External platen sizes800x800 mm Platen thickness60 mm Cake capacity630 l. Central inletcheck Hydraulic closingcheck With hydraulic unitcheck Automatic openingcheck MaterialPolypropylene Information Total height3,0 m Weight6000 kg CEcheck Floorspace6,0x1,75 m Extra Specificationsthis machine is equipped with plate cleaner. with :recessed plates. FilterpressesEMOFilters > FilterpressesBrand > EMO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...
Engine Brand: FPT, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: White , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 331 Kw, Rated Speed: 3000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/fpt-f4he0686a-used/318, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: F4HE0686AE; Transport weight [kg]: 600
Milling machine Deckel FP4 NC BJ 1987 Specifications •Travel: o X-axis: 560 mm o Y-axis: 500 mm o Z-axis: 410 mm • Includes tool cabinet and various tools (see photo)
Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment.
Key data: 300 mm, 150 mm, 300 mm
Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Spindle speed: from 40 to 2000 RPM Horizontally tiltable head Spindle motor: 2 speeds Motor: 1,5 kW Feeds: X - Z auto / Y manual Supplied without table only with one 4 concentric jaws Ø 140 mm Voltage: 380 V Width: 1200 mm Depth: 1200 mm Total height: 1600 mm Weight: approx 900 KG
FPT SIRIO-M Control: Heidenhain TNC 426 C Serial Number: LM0498020 Machine number: 1710799 CNC milling head automatically swivelling infinitely variable Spindle: ISO 50, 50 kW, up to 3000 rpm Hydrostatic Guides Travel (X/Y/Z): 4000 / 1200 / 2000 mm Table size: 5000 x 2000 mm Tool changer: 30-fold ATC (automatic)
Specifications: Manufacturer: Lid Type: FP1 Control: Heidenhain Active TNC113 Year of Make: 2007 Colour: green Travels: X 300, Y 160, Z 340 mm Spindle Speed: 40 – 2,000 rpm. Tool/movement Tool holder: SK40 (S20x2) Feed: infinitely adjustable Active feed: in X and Z axis Dimensions and weight Weight: approx. 800 kg Condition Condition: Used Functional: Tested and fully functional
Key data: 500 mm, 400 , 400
Deckel FP 4M Active with 3-axis active digital display, Year of manufacture 1996 Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Very good condition!
SMIPack FP560A L sealer and shrink tunnel 2011, Semi auto L sealer, sealing bar 560mm x 430mm, max pack height 230mm, up to 1500 packs per hour, mobile, 1ph, then feeds onto SMIPack T450 shrink tunnel, adjustable temp and speed controls, mobile, 3Ph
Tool Milling Machine Cover FP4MK 2203 Travel XYZ: 500-400-400 mm Spindle mount: ISO 40 Spindle speeds: 50-2500 Universal Rotary Table 2038 incl. Angle Counter VRZ560 Active Digital Display 3 Axes Heidenhain TNC113 Hydraulic drawbar for DIN 2080 Quill with 90 mm stroke Coolant system Incl. vice Weight approx. 1700 kg Year of construction approx. 1992
General SKU325W683 MakeMettler Toledo TypeFP82HT hot stage microscopy system LocationBarneveld Specified Features - Miscellaneous Motor100/120 volt, 230/240 volt Information Floor space0,31 x 0,48 m Total height0,15 m CEcheck Extra SpecificationsFP82HT is used to visually examine all kinds of thermal transitions when the sample is heated or cooled. The unit comes with the FP90 processorMiscellaneousMettler ToledoMiscellaneous > MiscellaneousBrand > Mettler Toledo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Key data: 990 mm, 390 mm, 590 mm
For sale is a robust and powerful universal milling machine of the brand DECKEL, type FP33. The machine impresses with its high stability, generous travel distances and SK50 tool holder – ideal for workshops, maintenance or manufacturing companies with high requirements. Technical data: Manufacturer: DECKEL Type: FP33 Tool holder: SK 50 Travels: • X = 990 mm • Y = 390 mm • Z = 590 mm Table size (L x W): 1200 mm x 1000 mm Spindle speed: 31.5 – 1600 rpm Motor power: 5.5 kW Machine weight: approx. 4,500 kg Dimensions (L x W x H): 3300 x 2500 x 2000 mm ⚙️ Condition & Notes: Good general condition (more details on request) Delivery: Loading on truck possible Viewing possible by appointment
CNC milling machine, cover FP3A, spare parts machine, control defective / incomplete We sell parts. of this machine, SK40 milling head, with quill, tool changer, ... Control unit, table, spindles, motors, spindle nuts, ... Or total: Euro 2000,- ex works
CNC portal milling machine Droop & Rein FP160/2 – technically perfect, dismantled Description: For sale is a Droop & Rein FP160/2 CNC portal milling machine, built in 1965, completely overhauled and converted to CNC by the Rottler company in 2003 (investment at the time: €750,000). The machine is equipped with a Heidenhain TNC 430 control system and a Heidenhain LB 382 C length measuring system and guarantees a high precision of ±0.005 mm. All components are technically flawless. The machine is currently dismantled and disassembled in our warehouse in Riesa, Germany, so that assembly, assembly and adjustment are required before commissioning. A viewing of the individual parts is possible. Technical data: Manufacturer: Droop & Rein Type: FP160/2 Item no.: 2698 Year of construction: 1965 (CNC conversion 2003) Control: Heidenhain TNC 430 Length measuring ...
A CNC universal milling machine Deckel is available. Travel X/Y/Z: 400mm/400mm/400mm, table dimensions X/Y: 700mm/460mm, max. table load: 350kg, tool holder: SK40, quill stroke: 80mm, speed: 4000rpm, feed rate: 3600mm/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: approx. 1800mm/1800mm/2200mm, weight: approx. 2500kg, control: Contour 3. The tool change magazine is no longer in operation. Documentation available. An on-site inspection is possible.
x-travel: 6000 mm y-travel: . mm z-travel: . mm surface area: mm control: type: Tool changer: chip conveyor: b-axis: 63 c-axis: 0 turning speeds: U/min spindle taper:: HSK spindle drive: 50 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine No.: 2259 B +/- 110° C 360° Table size: 6000 mm x 2500 mm (hole pattern 22H7 / M16) Spindle: Manufacturer Fischer, 2 pieces (type MFWS 1709/30 Serial number: 10015020 / 133227) Milling head: Forest Line type: fork head / B-axis +/- 110° swivel / C-axis 360° (infinite) rotation / Station for milling head storage (2 pieces) Chip conveyor: Scraper conveyor / Manufacturer: Richter Tool measurement: Blum Feed: X + Y 30,000 m/min / Z 28,000 m/min Rapid traverse: equals feed rate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our ...
This DECKEL FP4A was manufactured in 1994. A vertical machining centre featuring a travel range of X=565mm, Y=505mm, Z=400mm, SK40 tool holder, and a spindle speed of up to 4000 rpm. Consider the opportunity to buy this DECKEL FP4A vertical machining centre. Contact us for more information.
maximum number of results exceeded
please refine your search
