180 fp used for sale

Manufacturer: KUKA KR 180, Year: 2004, Max workpiece weights kg: 180, Year :2004

Manufacturer: Kuka KR 180-2 2000, Year: 2004, Max workpiece weights kg: 180, Year :2004

Offer Stephan micro-cut type: MCHD 180 year: approx. 2003 -Drive: 95 KW - 50 Hz - output per hour worked: approx. 2500-up to 8500 kg (product dependant) funnel version with screw on the motor shaft - cutting set diameter: 180 mm - including a new set of cutting (cutting heads: level 1, Z 24;) Level 2, no. 24) (cutting rings: 2 x MCH-D 180, gap size on request from 0.2 mm to 3.0 mm) price of the machine including a new blade set: 42.900,00. Price 34.900,00 the machine without a blade. Warranty: 3 months, excluding wear parts electro-no metal abrasion

Used spiral mixer DIOSNA, type: SP 180 A -in very nice condition- - Including 5 tank cars - Kettle for 180 kg dough or approx. 110 kg flour - With plastic hood and inlet for ingredients - the upper V-belt is NEW - In some cases, the wheels of the tank cars were renewed - Machine and boiler frame repainted - The machine runs very smoothly (a video can be sent) - the hydraulics are in good condition - The machine is perfect for sourdoughs - The machine has been technically completely tested - Condition: very good, ready for immediate use 3 pieces of the 5 boilers have some very fine hairline cracks. In our opinion, however, a repair is not necessary. However, these boilers can also be welded on request. The other 2 boilers are in very good condition and without cracks. We are happy to send you more information and photos. Viewing and test run are possible by arrangement. ...

Packing press 180P2 Inox with hydraulic lifting and vertical device Nominal power up to 1200 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2250 mm Width 840 mm He 1880 mm Maximum acceptance 1380 mm Weight 1020 kg Material 1.4301 / AISI 304 Press force 50 to Press pressure 270 - 320 bar Juice yield up to 75% Connection for juice drain 1 1/4 High juice drain 420 mm Scope 22 Pressing tummy 100x100cm + 24 press inserts Stainless steel 65x65cm ; New machine - best condition

WEINIG high speed moulder, type Hydromat Super 30-B, Machine specifications:, - Planing width 300 mm, - Planing height 120 mm, - Electric driven feeding system, motor 55 kW, - Feed speed 8 - 180 m/min, Spindle lay-out:, 1. Horizontal spindle bottom, motor 22 kW, 2. Horizontal spindle top, motor 30 kW, 3. Vertical spindle right, motor 18,5 kW, 4. Vertical spindle left, motor 22 kW, 5. Horizontal spindle top, motor 30 kW, 6. Horizontal spindle bottom, motor 37 kW, 7. Horizontal spindle bottom, motor 45 kW, 8. Horizontal spindle top, motor 30 kW, 9. Horizontal spindle top, motor 22 kW, - Front bearing for horizontal spindles 1+2+5, 6, 7, 8 and 9, - Digital positioning for spindle 3+4+8, - Short infeed table, - Bed plates hard chrome, - Automatic lubrication system, - Heavy duty feed rollers 220 mm, - Driven feeding rollers in table, - Heavy duty cardan feeding, - Feed speed frequency contro ...

new ! all stainless steel 2 speeds (30 and 60 rpm) 2 mixing directions 2,4 kW safety lid CE-approved overall dimensions (l x w x h) : 1.720 x 840 x 1.390 mm (open lid: H: 1.890 mm)

NEW

BIG volume bucket 240 cm with JCB Q-Fit attachment, - Construction year: 2025, - working width: 240 cm, - own weight: 351 kg, - capacity: 1.01 m3

Transnorm Curve Roll Track 180° 700-600 IR 1500 RA1222 The Transnorm Curve wheel conveyor is from 2005 and is in a very good (used) condition. Columns are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 3215 Curve Roll Track 180° Built: 2005 Condition: very good (used) Angle: 180° Inner radius (IR): 1500 mm Nominal/outer width (NB): 700 mm Usable width (NUB): 600 mm Weight: 200 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports Priceplus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Features: Construction year: 2005 condition: very good (used) Nominal / inner radius in mm: 1500 Nominal / outside width in mm: 700 Roll width in mm: 600 angl ...

Drive Wheel WHEELS - VOGEL 180 / 60 - 150 RV 5450 0180 00 Wheel Diameter: Ø 180 mm Rim Diameter: Ø 150 mm Tread Width: 60 mm Shaft Diameter: Ø 40 mm New ! Dimensions: 180 x 180 x 60 mm

Mecalux roller conveyorRoller conveyor 1800-540-450 RA1902 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 1800 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Electric data: 24V ITOH-Deki Construction year: 2017 condition: very good (used) Conveying length in mm: 1800 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-m ...

2 pieces curve belt conveyor 180 degrees, helix for climbing bands with SEW - used -: Price per piece from location: 2.995.-€ (net)! Manufacturer: Transnorm Type: 1600-105 Helix Built: 2011 Conveyor curve 180 degrees Nominal radius: 600mm Rated width: 700mm Condition: good Available: now Location: Bautzen warehouse

Piston for Idra 1800 multiblock, 428351, D260mm, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and in its original packaging. Piston for Idra 1800 multiblock, Piston dimensions: 1) D 145 mm x length 420 mm (ground surface) 2) D 260 mm x length 153 mm (6 grooves for piston rings) 3) D 200 mm x length 52 mm (1 groove) Approx. 130 kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech ...

Filter for AD 180 - New - Prefilter AD-180 A1030163 Article-No. MA-201013

Bearing Flange, Bearing Bracket COVER Housing Diameter: Ø 180 mm Bolt Circle(Housing): Ø 140 mm Shaft Diameter: Ø 32 mm Flange Diameter: Ø 70 mm Bolt Circle(Flange): Ø 54 mm Spare Part for Milling Machine DECKEL KF12 ! used, tested ! Dimensions: 175 x 180 x 185 mm

Turning table, 180 rest table, rotary table with aluminium topPositioning table, rotary table, round dividing table 180Assembly table, swivel tableTurntable: 1080 mmOverall height to top edge turntable: 630 mm- Turntable made of 25.5 mm thick aluminium plate with various holes- very stable turntable, can be rotated by hand- 2 pieces index locking positions 180, manually via foot lever for de-latching- stop damper under the turntable for the locking positions- very stable steel substructure- flange plate steel substructure L x W x H = 600 x 600 x 20 mmSpace requirement

17 m³/min compressor COMPAIR R 180 TS-Z Properties: Type R 180 TS-Z ID number 449003/10 Built-in compressors 10 Order no. 10195540 Compression medium AIR/LUFT Length 2800 mm Width 2050 mm Total height 2100 mm Weight 3860 kg Flow rate 17.0 m³/min Suction pressure 1 bar Step pressures 2.4 /1.2 bar g Speed 1000 min ̄¹ Installed engine power 110 kW

Belt conveyor/ webbing/ conveyor belt approx. 180 linear metres Manufacturer: Trapo AG Condition: Used Year of construction: 2011/ 2012 Drive Type: Belt Total length: approx. 180 meters Total width without motor: approx. 575 mm Total width incl. motor: approx. 700 mm Belt width: approx. 500 mm Strap Type: Smooth/Longitudinal Grooves Frame height: approx. 130/ 90 mm Material: Steel Color: Blue Including SEW motors (0.75 and 1.1 KW): 12 drive units Price per meter Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Internal Article Number: 2025112003 Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Goods are delivered in disassembled condition, belt must be glued on site. Thanks to the excellent workmanship of the conveyor techno ...

Manufacturer: HÄNER Baumaschinen GmbH Device type: Hydraulic dozer (tilt grader) Type: HPH-T 180 Serial No.: 25006117 Year of Make: 2025 Model HPH-T 180 Design Hydraulic leveller Weight 440 kg Year of construction 2025 Oil requirements 40–60 l/min Working pressure 160–200 bar Working width approx. 1,800 mm Operational class approx. 6–10 t excavators Auction-ID: 04D-BP6-2

Equipped with: Hour position: 339 hours, turntable, extraction, pressure vessel, doors over the full width 1780 mm and depth 1800 mm of the cabin, with hatches in the doors for long objects; Turntable ø 1500mm, on rails, can be driven out of the cabin, external blast pot with automatic recovery (recycling system). Large size extraction, type: SO-250p, motor power: 4.0 Kw; sound attenuation on exhaust; with speed control and automatic filter cleaning; Cyclone pre-separator. including 3-fold LED lighting. The Sant-Tech PK-180 blasting cabinet set (year of construction 2020) consists of a cabin (±1.5–1.8 m wide, 0.8–1.0 m deep, 1.9–2.0 m high, ±800 kg) with 230V supply, air consumption ±12,000 l/min and working pressure 2–8 bar, combined with a ZO-250P extraction (400V, 4 kW, 4–6 bar, ±250 kg, approx. 0.8–1.0 × 0.8–1.0 × 2.0–2.3 m) and a 40-litre pressure vessel (wor ...

Wash wa lund WA LC40 with raetzmuehle RM40 for packing press 180p2 Nominal power up to 2000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2000 mm width 700 mm Maximum 2400 mm Hoehe Assumption 800 mm Weight 290 kg material 1.4301 / AISI 304 Connection for cleaning 1/2 internal Connection for washing 2 unless He mash release 1460 mm Maximum fruit release 800 mm Scope 12mm Cutting sieve ; New machine - best condition

Axles: 6 Control: IRC5 type: M2004 Load: 180 kg Distance: 2550 mm Year of construction: 2011 Condition: Used, removed functional from the production

Lot of 180 roller bearings stamps, SKF, FAG, INA , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An exceptional special price of €3.50 per item, excluding VAT. The original price is at least 10 to 15 times higher. We can divide the bearings into 3 groups: 1) Approx. 90 pieces in original cardboard packaging 2) Approx. 30 pieces in original foil packaging 3) Approx. 60 pieces open, unused, fully functional bearings. See stock list on photo. Minor defects of 1-2% possible. These are brand-name products only. Due to the extremely low package price, we cannot offer any guarantee/warranty in this ...

Mannequin male running 180 cm

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.25 kW -Protection class: IP 20 -Quantity: 5 available -Price: per piece -Dimensions: 270/130/H190 mm -Weight: 7.1 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.4 kW -Protection class: IP 20 -Quantity: 2 available -Price: per piece -Dimensions: 310/132/H190 mm -Weight: 10 kg/piece

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -divided -Tool: 60° -Dimensions: 203 x 45 mm -Total length: 1800 mm -Lengths: 900/900 mm -Weight: 82 kg

Gear motor electric motor Electric gear motor -Speed: 180 rpm -Power: 0.37 kW -Construction: B14 angle -Diameter shaft: 22 mm -Protection class: IP 55 -Price: per piece -Number: 2x available -Weight: 17 kg

Shelf tray, spill tray, floor tray, pallet tray, collection container, spill pallet -Manufacturer: P&D, drip tray -Drip tray: Type -Collection volume: 180 liters -Load capacity: 800 kg -Grating: galvanized -Dimensions: 1210/1240/H285 mm -Weight: 493 kg

Servo motor, electric motor, DC motor -Manufacturer: Advance, DC motor -Type: 564... unfortunately no longer recognizable -Voltage: 36 VDC -Power: kW -Speed: 1800 rpm -Shaft: Ø 16 x 55 mm -Dimensions: Ø 130 x 275 mm -Weight: 8.0 kg

Working width is 180cm, high tipping bucket. Auction-ID: A3-43516-8416

CONVENTIONAL LATHE Inv. No. 13.188C1 Make PINACHO Model S-90/180 Mach.no. 22417 Centre Distance 750 mm Max. Swing over Bed Ø 360 mm Max. Swing over Cross Slide Ø 205 mm Spindle Bore Ø 42 mm R.P.M. 30 – 2000 kW 2.2/3.4 Volts 400 Cycles 50 Including: 3-Jaw Chuck Ø 200 1 x Steady Rest Toopost Rapid Original type A Coolant attachment

Grease Environmentally friendly, quickly biodegradable lubricating greases based on calcium soap and rapeseed oil. Manufacturer: Fuchs Item No.: 600654726 Plantogel 2 N 180 kg NEW - orig. packaging

Stainless Steel Control Box, Control Cabinet PAGUS 6AV3515-1MA22-1AA0 with Control Panel SIEMENS Operation Panel Coros OP 15-C2 SIEMENS Bus Terminal RS485 6GK1500-0AB00 used, tested ! Dimensions: 785 x 180 x 885 mm

Light barrier, light curtain transmitter and receiver SICK C2000 C20S-180103A12 C20E-180303A112 Range: 0 - 6 m Protective field height: 1800 mm IP 65 used !' Dimensions: 1970 x 110 x 50 mm

Filter Cartridge, Filter Cartridge Set SF FILTER HY 18045 Filter cartridge set consists of 2 filter cartridges ! New ! Dimensions 290 x 145 x 160 mm

Machine vise PAGUS jaw width: 220 mm span: 180 mm Heavy duty Dimensions: 700 x 235 x 140 mm

DC Generator for DDR Crane Motors VEM GGB 180.1K ( GGB180.1K ) TGL 20675 ( TGL20675 ) 6.2 kW 230 V DC motor: 7.5 kW 1435 rpm 380 V used, tested ! Dimensions: 1090 x 360 x 540 mm

Kaulenwagen, Dockenwagen PAGUS bale width: 1800 mm axle height: approx. 1200 mm with bale cotton blended fabric Ø 1000 x 1450 mm used, tested ! Dimensions: 2500 x 1000 x 1700 mm

Pneumatic grinder, pneumatic straight grinder WMW type 1804 17000 rpm grinding wheel diameter: Ø 50 mm with approx. 1.6 m connection hose used, tested ! Dimensions: 330 x 50 x 80 mm

Equipment: Heatable/coolable, Insulation, Overpressure,Condition: used,Volume: 180.000,Max. overpressure: 1.5,Max. permissible Operating temperature : 18,Lower shelf: cone bottom,Design: hanging,Heating/cooling (filter bar): available,Volume double jacket: 1.462,0,Max. permissible Operating temperature : 20,Temperature control cylinder: half-tube coil,Insulation: available,Diameter inside: 4.100,Diameter outside: 4.500,Cylindrical height: 12.000,Total height: 17.000,Technical documentation: Drawing,Manhole / dome: in the top floor,Type plate: Yes,Equipment: Crane eyelets,Outlet: available,Last use:

USED VERTICAL MIXER, constructed in sturdy carbon steel, Total height 3.400 mm., Diameter 1.300 mm., Legs 2.150 mm., Barrel height 1.250 mm., Cone height 750 mm., inner screw 180 mm. diam., Nominal capacity 1.800 lt.ca, side discharging pipe, Discharging point 860 mm. from floor., hatch on barrel mm. 500 x 700, 1,5 kw drive, installed power - used power in work: about 60-65% : 1.5, capacity: 1800 lt.

NEW, 180 cm width, 215 kg net weight, suitable for Euro attachment, Year of construction: 2021

Desks 1 KÖNIG+NEURATH approx. 180x80 cm, 1 IKEA Thyge approx. 160x80 cm

Gear motor, electric motor -Motor comes from: Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.5 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Number: 3x gear motors available -Price: per piece -Dimensions: 345/130/H165 mm -Weight: 12 kg

adjustable gear motor, variable speed gear motor, electric motor -Gearbox manufacturer: MOTOVARIO TKF/5 -Engine manufacturer: -Motor power: 0.37 kW -Speed range: 35-180 rpm -Motor: adjustable -Diameter hollow shaft: Ø 24 mm -Construction: B3 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 445/190/H265 mm -Weight: 21 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 180 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H160 mm -Weight: 18.8 kg

Air flow rate 10,800 l/min Manufacturer Atlas Copco Machine number ITJ 556933 Type FD 180 VSD Year of construction 2022 max. pressure 14 bar Power consumption 3 kW Delivery throughput 10,800 l/min Refrigerant R 410 A Machine is in mint condition lxwxh 81x104x97 cm Weight 134 kg Loading costs 50.00 Euro Auction-ID: 043-H7M-3