129,460 used machines on RESALE, but how to find them? Machine Search
Factory number: 78046 Power: 24 kW Engine in EEx Switchgear not in EEx with funnel and chute Operating Instructions, spare grinding set LWH: 700 x 700 x 1500 mm Weight: approx. 300 kg
CATALOG NO. 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - knife length 530mm - number of knives 2 pcs - sieve dimensions 55x50mm - 2 geared rollers pulling from the bottom - lower shaft motor approximately 3kW - toothed shaft pulling from above - upper shaft motor 1.5kW - length of the feed belt 4600mm - feed belt width 400mm - main engine 55kW - autoreverse - feeder dimensions length/width/height 4630x620x760mm - machine dimensions length/width/height 2510x1700x1200mm - weight approximately 3500 kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 85,900 PLN Net price: 19089 EUR depending on the price 4. ...
The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...
Key data: 1800 KW, 2250 kVA, 400 V
ENGINE: 4016-61TRG3 FREQUENCY (HZ): 50 POWER: 2250kVA / 1800(kW) CONTROL SYSTEM: DSE / ComAp FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 17624kg DIMENSIONS L/W/HEIGHT (MM): 750022002250 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For more information or ...
Height 1950 Width 1300 mm Length 3000 mm Voltage Electrical: 400V 50Hz 3N Installed Power 45 kw Main material Stainlees Steel Throat Diameter 180 mm Feeding System Hooper Throat Material Stainless Steel
Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 180 Connection voltage 1 x 230 volts Adjustment range 20 - 170 amperes Switch-on time 25% ED at 170 amperes 60% ED at 130 amperes 100% ED at 115 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 140 x 230 mm Weight 5 kg Age 12 months Condition workshop-tested, very good, as new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 piece mains plug 230 ...
Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,500 mm Circumferential diameter (max.) 4,000 mm Workpiece height (max.) 3,000 mm Total height of the machine 7,250 mm Maximum workpiece weight 50,000 kg Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam 1,500 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Stations Crossbeam Support (Left) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Changer Main Drive: Main motor power 100 kW Face plate speed range 1-100 rpm. Maximum torque at the face plate 100 ...
1. Screen changer "Kreyenborg" K-SWE 180 2. Water ring granulation "AGRIFON" 3. Classification sieve for the separation of Granules over-good and lower grain sizes Throughput: Depending on material mix , 500 kg/h
MARINE DIESEL ENGINE Reference number 20112 Brand CUMMINS Model KTA19-M600 Power 600 HP RPM 1800 PEAK TORQUE 1950N.m @1500r/min General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED WITH FLEXIBLE COUPLING Governor MECHANICAL Exhaust system WET Turbo TURBOCHARGED AND AFTERCOOLED Cooling system WATER COOLED Starter YES- 24 VOLT Remarks RUNNING ENGINE SPECIFIC FEATURES Panel NO - CAN BE DELVIERED EXTRA Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) 2450mm x 1150mm x 2000mm Weight (kg) APPROX 2700 KGT
TECHNICAL DATA: Autoclave dimensions mm: 350 x 2000 Autoclave volume lt: 175 Installed electrical power KW: 55
DUE TO CANCELLATION OF TWO NEW CONSTRUCTION PROJECTS WE HAVE THESE TWO NEW PUMPS FOR SALE CAPACITY IS 180M3 PRO HOUR Data: HERSTELLER ROBUSTA type RB425BGS/T222 WITH BUILT E-MOTOR 22KW-400/690Volt 2900 UMDR/M IP 55 YEAR OF CONSTRUCTION IS 2012
Key data: 4000 mm, 5000 mm
Specifications Control SIEMENS SINUMERIK 840 Dsl Main dimensions and travels Face plate diameter 4,000 mm Circumferential diameter (max.) 5,000 mm Workpiece height (max.) 5,000 mm Total height of the machine 9,250 mm Maximum workpiece weight 80,000 kg Table base Y Horizontal table displacement 2,500 mm Crossbar Vertical adjustment of the crossbeam 3,200 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support - 2740 + 2740 mm Vertical displacement of the chisel slider 1,800 mm Cross-section of the chisel slider 250x210 mm Side Support (Right) Vertical adjustment support -25 + 2170 mm Horizontal displacement of the chisel slider 1,000 mm Cross-section of the chisel slider 250x210 mm Turning diameter max./min. 4,500/2,500 mm Main Drive: Main motor power 100 kW Face plate speed range 0.63 – 63 rpm. Maximum torque at the ...
We supply round and flange ring shears (circular shears) in two sizes - 3/1300 and 5/1800 Our KS circular shears are PLC - controlled hydraulic - electromechanical machines designed for the production of rounds and flanges made of steel sheet, VA stainless steel sheet, Aluminium and non-ferrous metal sheet, maximum shearing performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 3 mm or 0.5 mm to 5 mm, smallest / largest cutable circular board 150 mm / 1,300 mm or 1,800 mm respectively – cutting speed up to 35 m/min, drive power 5 kW or 7.5 kW, weight approx. 2,000 kg and 3,000 kg
Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 180 K Connection voltage 1 x 230 volts Adjustment range 25 - 180 amperes Switch-on time 20% ED at 180 amperes 60% ED at 110 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 2-wheel transmission Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special accessories ColdMIG welding process E-welding, MIG soldering Filling wire welding Weight 17 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-200 coil, 5 kg 1 can ...
Used three extruders with die - head/three layer extruder from POLY TECH model HP 1800/3/100/55/55. New: 2000. 1) Head/Matrix - Slot of the die - 2,26 - Die diameter - 220 mm - Thickness 25-130 microns - Capacity 250-300 kg / hour 2) Matrix/Head - With efficient heating system (set of heaters with sensors PT/100 temperature sensors) - Three described Poly Tech extruders A) Extruder fi 100 mm L/D 30 with 150 kW motor drive . ZAMBELLO/ITALY drive gearbox TYPE RPU 280 E RPM 1400 B) Extruders fi 55 mm L/D 30 with 60 kW motor drive pcs. 2 ZAMBELLO/ITALY gearboxes TYPE RPU 180 E RPM 1400 The described extruders have a gravimetric system from DOTECO/ITALY Model GRADO IIS/GO 4100940 equipped with a metering system with computer readout on the measuring cabinet. Complete plasticizing systems including drive gears and main driv ...
Reference number Brand Model Power 20152 CUMMINS KTA19-M3 600 HP 1800 RPM PEAK TORQUE 2374N.m @1800r/min BRAND NEW AVAILABLE SPECIFIC INFORMATION Flywheel housing Flywheel Governor Exhaust system Turbo Cooling system Starter Remarks Sae-0, Sae-1 18 inch, 14 inch MECHANICAL WET TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 2450mm x 1150mm x 2000mm
Key data: 180 KW, 225 kVA, 400 V
MODEL: EQ-D225180 ENGINE: Deutz BF6M1015-LA GA FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 225(kVA) / 180(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2900kg DIMENSIONS L/W/HEIGHT (MM): 380012502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry ...
TECHNICAL INFORMATION Manufacturer: RITZ Pump Factory Name: Fresh water pump Built: 1998 Head: 120 m Pumping capacity: 180 cbm/h Speed: 1486 Ump Drive power: 90 kW If there is any interest, we are happy to send you an offer with photos. EuroConsult Dimitrios Piretzidis
Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 180 Connection voltage 1 x 230 volts Adjustment range 20 - 170 amperes Switch-on time 25% ED at 170 amperes 60% ED at 130 amperes 100% ED at 115 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 140 x 230 mm Weight 5 kg Age 12 months Condition workshop-tested, very good, as new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 piece mains plug 230 V, ful ...
Manufacturer Düchting Type centrifugal pump LHK 125x5 Unused / Refurbished Flow rate 180 m3/h Head 150m Step number 5 Weight approx. 550kg Special price
Freshly overhauled DC motor Baumüller/Krämer+Grebe Type: GNF 180 MN No.10404901 400V 173 kW 3100 rpm Excitation: 320V with speedometer
Centrifugal pump Manufacturer: VEB Kyffhäuserhütte Artern Type: KSP 65/180-1,3 Item #: 98605 Year of construction: 1987 Power: 3.8 kW standing on feet very good condition LWH: 560 x 250 x 450 mm
The GB 180 crawler excavator is engineered for serious excavation, lifting, and heavy-duty operations. Operating Weight: 18,000 kg Engine: Cummins QSF3.8 (EURO-compliant) Power Output: 93 kW (125 HP) at 2200 rpm Hydraulic Pump: Hengli high-pressure hydraulic pump Control Valves: Husco precision control valves Swing Engine: Eaton or Sunjin (Korea) Traveling Motor: Eaton or PMP Hydraulic System Pressure: 28 MPa Bucket Capacity: 0.8 m³ Bucket Digging Force: 98 kN Arm Digging Force: 68 kN Swing Speed: 0–12 rpm Travel Speed: 2.8–4.2 km/h Gradeability: 30° Overall Length: 8,540 mm Overall Width: 2,720 mm Overall Height: 2,920 mm Undercarriage Width: 2,720 mm Ground clearance: 480 mm Track Width: 600 mm Maximum Digging Radius: 8,985 mm Maximum Digging Depth: 5,975 mm Maximum Digging Height: 9,430 mm Maximum Dumping He ...
PART NUMBER: 7649 Specifications: - inlet width 900mm - inlet height 300mm - shaft width 1030mm - shaft diameter 700mm - knife length 1030mm - number of knives 3pcs - sieve dimensions 70x70mm - 2 toothed pulling shafts at the bottom - lower shaft motor 7.5kW - 2 toothed pulling shafts from above - upper shaft motor 7.5kW - belt feeder - redler with chain belt 5600mm + 10600mm 2.2kW - width of the feeding belt 800mm - main motor 90kW - reverse gear - total dimensions of the machine length/width/height 3300x3100x1700mm - chipper base dimensions 3300x2080x1940mm - feeder / redler dimensions length/width/height 5600x900x1000mm + 10600x1050x1600mm - Base size for the feeding belt 5100x1300x2520mm - total weight about 16000kg ADVANTAGES – made in Germany – a chain conveyor of the redler type, equipped with scrapers – reverse gear – used chipper, very ...
The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...
table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1.250 mm table rotating: 360 Grad table positioning: 4 x 90 ° feeds - longitudinal: 0,63 - 2.000 mm/min total power requirement: 4 kW weight of the machine ca.: 7,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used heavy duty paper pulper Manufacturer: PAAL Type: PAL-1800 Year of Make: 1990 Main parts of the machine: 1 drive housing with rotor and externally mounted motor 1 slot 1 Electrical control Weight of the machine approx.: 9,000 kg Capacity up to approx.: 35,000 kg/h Main drive power: 75 kW Total connected load: 78 kW Rated current: 150 A Operating voltage: 400 V, 50 Hz Filling width approx.: 1,800 mm Filling opening approx.: 1,800 x 1,972 mm incl.: 1 set of vibration dampers Functioning: The compact and, above all, large-piece paper types to be shredded must be conveyed into the discharge chute in the correct dosage using a conveyor belt. The rotor tears the material into pressable material and hurls it into the ejection hopper, which is open at the bottom and conveniently located above the conveyor belt leading to the press. ...
welding current: 10 - 180 A open-circuit voltage: V connected load frequency: 230 V weight: 6,8 kg Dimensions (LxWxH): 403 x 153 x 264 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m Welding wire 1 roll, Pressure gauge Welding wire 1 roll, Pressure gauge With nozzle and gas nozzle List price: 2200, -EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used heavy duty paper pulper Manufacturer: PAAL Type: PAL-1800 Year of Make: 1996 Main parts of the machine: 1 drive housing with rotor and externally mounted motor 1 slot 1 Electrical control Weight of the machine approx.: 9,000 kg Capacity up to approx.: 35,000 kg/h Main drive power: 75 kW Total connected load: 82 kW Rated current: 162 A Operating voltage: 400 V, 50 Hz Filling width approx.: 1,800 mm Filling opening approx.: 1,800 x 1,972 mm incl.: 1 set of vibration dampers Functioning: The compact and, above all, large-piece paper types to be shredded must be conveyed into the discharge chute in the correct dosage using a conveyor belt. The rotor tears the material into pressable material and hurls it into the ejection hopper, which is open at the bottom and conveniently located above the conveyor belt leading to the press. T ...
faceplate diameter: 1800 mm turning height: 1600 mm turning diameter over bed: 2150 mm turning speeds: 3,15 - 250 U/min voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PANASONIC TL-1800 GIII welding robot was built in 2021 in Japan by Panasonic Smart Factory Solutions Co., Ltd. The machine, distinguished by its high reliability and ease of operation, is an excellent choice for precision welding of workpieces using the TIG method. Its slim design, combined with the large range of arm movement, allows free operation in all positions, even in hard-to-reach places. The TL 1800 robot arm is offered together with equipment, which includes a controller, a portable control unit and a TIG welder. The total weight of the machine is 215 kg. Technical specifications of the PANASONIC TL-1800 GIII robot - number of axes: 6 - maximum payload: 8 kg - maximum arm reach: 1801.8 mm - robot axis movement range axis 1 (rotating trunk): ± 170° axis 2 (upper arm): -90° / +165° axis 3 (forearm): -80° / +210° axis 4 (rotating wrist): ± 270° axis 5 (bending ...
Bartscher refrigerated table 0 °C to 10 °C 1 unit – double benefit: convection cooling ensures a constant and uniform cooling temperature inside the refrigerated table with 1 door and 4 drawers. With its high-quality and robust stainless steel surface, the appliance can be perfectly integrated into any kitchen and can also be used as a work surface. • Number of drawers: 4 • Door hinge: Left • Door Type: Hinged Door(s) • Number of doors: 1 • Number of cabinets: 1 • Cabinets refrigerated: Yes • Drawers refrigerated: Yes • Standard format drawers: 1/1 GN • Connected load: 0.452 kW | 230 V | 50 Hz • Feet height adjustable: Yes • Temperature range: 0 °C to 10 °C • Height adjustable: 850 mm to 900 mm • Backsplash: 50 mm • Cooling: Convection • Refrigerant: R134a • Digital Display: Yes • Depth GN container max.: 150 mm • On/Off S ...
CNC Bedmilling Machine Make: SACHMAN Model: RP 3 x 1800 mm Year: 1996 ( only 5000 hours ) Control: Heidenhain TNC 407 Table: 2000 x 750 mm Speeds: 22 - 3500 rpm Motor: 15 kW Oil cooled universal TVK millinghead
front mowers; Intermediate axle mower John Deere tractor for 2000 PTO
LAGUN NG- L 1800 CNC universal milling machine LAGUN Machine Tools S.L.- Spain Control HEIDENHAIN TNC 360 X-axis 2300 mm Y-axis 650 mm Z-axis 600 mm Table 1900 x 550mm Table load 2,5t Spindle speed stepless 50 - 3000 rpm Spindle taper SK 40 Spindle motor 9.5kW Total power 15 kW Feeds -stepless- 0 - 5000 mm/min Rapid traverse 10m/min Tool changer 20 tools Weight ca. 6,5 t Accessories: 3x Vices, about 10 tool holders, touch probe, others
ID3685 Landbanden/Country conveyor belts Approx. 180m of conveyor belt for 650mm belt width, consisting of 30 hot-dip galvanized conveyor belt profile joints in profile heights of 120mm (9 pcs) and 100mm (21 pcs), 1 drive station with Stiebel 18.5/22kW gearbox with a gear ratio of i=11.6:1 - drum diameter 430mm - conveyor belt speed v= 2.68 m/s, 1 reversing station - drum diameter 330mm, 150 roller chairs, three-part, plus mounting screws approx. 180 m of land belt road for 650 mm belt width consisting of 30 pieces of land belt profile joints, hot-dip galvanized, in profile heights of 120 mm (9 pcs) and 100 mm (21 pcs), 1 piece of drive station with Stiebel slip-on gearbox 18.5/22kW with gear ratio i=11.6:1 - drum diameter 430 mm - conveyor belt speed v= 2.68 m/s, 1 piece of reversing station - drum diameter 330mm, 150 pieces of roller chairs, three-part plus fastening screws
Frequency controlled pump, TPE2 80-180 N-A-F-A-BQQE, Grundfos, new -30% - Single-stage inline pump (glanded pump) with speed-controlled, fan-cooled permanent magnet synchronous motor, - 50.5 m³/h, 360 - 4000 rpm, 2.2 KW, 12.8/18m, DN80, 10bar, 3x380-500V, - Grundfos 98437605, control panel HMI 200 standard, function module FM 300 - Frequency converter MGE90LD 2-56C-IA For air conditioning of commercial buildings, heating for commercial buildings Hot water circulation in commercial properties and much more. Special price ! The current new price of a similar product is € 4.800 excl. VAT. We still have several identical pumps, but the quantity is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a co ...
COLCHESTER MASTIFF V/S 1800 universal lathe was built in Great Britain in 1998. The machine allows machining a workpiece with a maximum length of 2000 mm and a diameter of 560 mm (above the bed) or 370 mm (above the support). The 11 kW spindle of the lathe with reading rotates at 1800 rpm. The lathe is equipped with a MITSUBISHI Freqrol A200 inverter and a SONY LH52 digital display. Total weight of the machine is 3250 kg. Technical data of the lathe COLCHESTER MASTIFF V/S 1800 - turning length: 2000 mm - turning diameter above the bed: 560 mm - turning diameter over support: 370 mm - inverter: MITSUBISHI Freqrol A200 - digital display: SONY LH52 - spindle speed: 1800 rpm - spindle bore diameter: 90 mm - spindle power: 11 kW - MASTIFF VS 1800 machine dimensions: (L x W x H): 3750 x 1700 x 2100 mm - total weight: 3250 kg
Cloth Puller Oven Schiesser Pull-off Cup NEW 160/180cm Stove Depth -Aluminium cloth pull-off board furnace slider NEW -with undercoat -for 160 / 180cm depth -Pullers are 194cm long -with stainless steel trolley on 4 swivel castors -External dimensions of the carriage: 206x61cm and 182cm high
Packer, Fabr. Matec, type: VPE 1200, 4-head, for 0.5 lt. bottle in box of 20, box cross-section, YOC 2004 Unpacker, Fabr. Matec, sorting unpacker, type: VPA 1800 SA, 6-head, for 0.5 lt. bottle in box of 20, box traverse, with 2 tables, built in 2004 Machines removed, price on request
We offer a paternoster LTG-TowerMax P 2.4-120-20-380-4780 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 4,780 mm Overall width 3,385 mm Overall depth 1,180 mm 20 carriers with a payload of 120 kg each in clear usable dimensions: H = 380 mm W = 2,950 mm T = 410 mm Chain jump 412 mm 20 galvanized intermediate floors for 55 kg payload each Total payload up to 2,380 kg Side table in 1000 mm above OKFF with wooden worktop, 300 mm deep, manually operated lifting door Colour scheme grey/grey, supporting cases anthracite Motor power drive 1 x 1.8 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request
Available for sale 1 x 260 kW Gas genset Guascor SFGLD 180. Unit prepared to work in isle mode. The genset is in our installations and is in great working conditions.
DEHUMIDIFIER MUNTERS ML 180 Desiccant dehumidifier with air-cooled condenser. Designed to efficiently dehumidify unheated enclosed spaces, with operating hours counter. Stainless steel sheet exterior, one-piece, fully corrosion-resistant plastic, with interchangeable front and rear panels for easier installation. Built in 2009. FEATURES - operating temperature: +0 / +25 °C - dehumidifies up to -20 °C - dehumidifies up to low dew point - IEC Protective class (unit): IP33 - IEC Protective class (electrical panel): IP54 - Sound power level to room Lw(A) dB (all inlets and outlets ducted): 75 dB(A) - Filter class: G3 Process Air - Rated airflow: 180 m3/h - Available static pressure: 200 Pa Reactivation Air - Rated airflow: 67 m3/h Condenser - Sensible heat: 1.4 kW - Fan power: 0.3 kW - Rated airflow: 650 m3/h - Available static pressure: 200 Pa ...
Labeler, make Krones, type: Vinetta 6-3-3/180, control range: 1.700 - 4.800 bph, for 0,7/0,75 lt and 1,0 lt bottles, with 2 stations for body-, shoulder- and back label, direction: right->left, built 1985
Headop Automatic Feeder With 4 x 4 Openings Opticontrol for pile control Siemens electronic control Job memory Automatic sheet change Lap opener Mechanical opening Colour touch screen Maximum sheet size 510 x 320 mm - 150 x 75 mm 10 x stitches Speed : 180 cycles per minute
Rietschle side channel blowers 1.5 kW 170 / 200 (max.) m³/h
maximum number of results exceeded
please refine your search
