17 mw used for sale

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

The following completely reconditioned and ready compact system of SEPARATORS & SERVICE T.D. is for sale. This selfcleaning separator WSPX 303TGP-71 is clean mainly used water-based coolant, for the concentration of washing liquids like lye also waste water or rain water cleaning. The maximum hydraulic throughput capacity is 1500 l / h. The engine is a two-pole motor with 50 Hz 2.2 kW. The drum has a speed of 9516 RPM 69 DB (A). Control water consumption is 0.5 l / emissions per output. Sediment volume ca: 0.63 liters. Output of min 0.8 liters, max 0.9 litres. The separation is carried out in the separator drum which is driven by the electric motor via a flat belt. The separator can be used as a concentrator with a large heavy phase (E.g. water) and a small stage (E.g., oil), as well as the light phase. The separator can be used as well as cleaning separator (Klarifikator) with o ...

QUASAR 50 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le|L0, strain LC|LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configured "chec ...

Tip height 150 mm top width 630 mm spindle bore 40 mm speed (infinitely) 55 3000 Rev/min feed 0.05 0.35 mm / U inside cone spindle / tailstock MK 5 / MK 3 swing over cross slide 177 mm turning diameter over bed 340 mm 4.45 kW dimension 1730 x 970 x 1300 mm weight 1250 kg

System: pressure booster pump needed Manufacturer: Allweiler Type: LV 50/4 / diameter. 170 Model: U2. 6 d-W1 Year of construction: 1999 Flow rate: 40 m, m³/h H: 154 m n: 2900 1/min P: 26 kW

The quasar 100 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-confi ...

Formats 500, 750, 1000 ml. For pasteurized milk. Conversion to volume production type 190 V. Straightening tool for cassettes with 20 spare cassettes. 2 screwdriver Capper 20. Power 9000 pack/h. Only 13000 operating hours. Disassembled by Tetra itself.

NEVER INSTALLED! - IS DESIGNED TO USE 170 MM DIAMETER DISCS TO PRODUCE RODS OF DIAMETER 5.5 UP TO 12 MM.

Reconditioned cylinder head

Valve basket unit in Exchange

Injection pump complete - used

Product: injection molding machine Rubric: injection moulding machines Make/model: Krauss Maffei KM 320-1900 C3 Year of construction: 1999 Krauss Maffei injection moulding machine Type: KM 320-1900 C3 control: MC4 year: 1999 Clamping unit Clamping force t 320 Gap mm: 920 Holm dimension mm: 710 x 710 min/max height mm: 380 Plate size: 1060 x 1095 Injection unit Screw diameter mm: Gr 70 injection weight: 954 Injection volume cm m³: 1048 Spray pressure bar: 1778 Dimensions and weights Dimensions Lxwxh m: 6.75 X 2.15 X 2.4 machine weight kg: 16,300 Miscellaneous C3 SYSTEM EUROMAP 12 interface

Relay valve in Exchange

Make/model: Krauss Maffei KM 450-3500 C3 Year of construction: 2004 Krauss Maffei injection moulding machine Type: KM 450-3500 C3, ACCU control: MC4 year: 2004 Clamping unit Clamping force t 450 Gap mm: 1170 Holm dimension mm: 900 x 800 min/max height mm: 480 Plate size: 1270 x 1230 Injection unit Screw diameter mm: 80 Injection weight gr: 1544 Injection volume cm m³: 1754 Spray pressure bar: 2205 Dimensions and weights Dimensions Lxwxh m: 7.98 x 2.35 x 2.55 machine weight kg: 26,000 Miscellaneous C3 system EUROMAP 12 interface

Fuel injectors in Exchange

Raw water pump in Exchange

Blacksmith hammer / air hammer Zeva machines 16 bear Air / forging hammer 16 bear Max 250 strokes/min Working cylinder diameter 90 mm Stroke approx. 170 mm CLOUT approx. 16 bear Anvil is connected to machine Ambosswerzeug can be changed CLOUT and Geschwindegkeit can be controlled with foot switch and hand 1.5 KW, 250 kg If you are interested in air hammers with 25Baer, 40Baer, 55Baer and 75Baer write me a short message!

There are various new parts for King industrial head machine I-Rex for sale. new flange for drum King industrial head machine I-Rex: - Outer diameter: 310mm - Inner diameter: 40mm - Width: 25mm - Material aluminium new ripple shaft for drum King industrial head machine I-Rex: - Length: 910mm - Outer diameter: 59mm - One side bearing seat: 20mm outer diameter - Steel tinned Side plate dough guide for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex: - teflonized Side plate dough guide for pre-portioners for type TRÖ 240 for drum King industrial head machine I-Rex Plastic inner side plate Dough guide for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex Aluminum side panel for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex Gear set Z 24 for pre-portioners for type TRÖ 240 for  ...

Description The machine was Teilrevidiert Technical data: Usable area of table 1100 x 255 mm Table movement: Longitudinal/vertical/horizontal 700 / 430 / 250 mm Spindle speeds 38 1500 rpm. Recording ISO 40 Dimensions L/W/H 2260 / 1720 / 1650 mm machine weight approx. 1650 kg

Cat.-No. 14-0062 in a very good condition Total Height: 1700 mm Total Length: 3750 mm Diameter: 1620 mm Height Tank Body: 1600 mm Weight: 600 kg • Material: AISI 304, Front Side Marbled, Inside IIID • with Manhole on the front 420 x 320 mm • with Fermentation Lock • with Thread Connection 1/2 • with Clap NW 40 • with outlet discharge DN 40 • with Angle Seat Butterfly Valve with Outlet DN 40 The price is for one tank. All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Heavy cable separation machine DeltaX 4010 technical data diameter cable: 18 up to 180 mm cutting speed: 32 m minute power: electric motor 11 kw / 380V dimensions (Lxwxh): 1880 x 1400 x 1560 weight: 1750 kg blade adjustment: hydraulic

Cat.-No. 14-00103 in a very good condition with Outlet Discharge 33.170 Litres in stainless steel in AISI 304 very stable construction Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge manufacturer: Möschle Measurements: Width: 1600 mm Depth: 7200 mm Height: 4000 mm weight: 2,5 tons All prices are valid ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Battenfeld injection moulding machine Type: BA 8000 / 7700 HM, 12146 h Runhour! Control: Unilog 9000 C year of manufacture: 1997 Clamping unit Clamping force t 800 gap mm: 1250 Holm dimension mm: 1750 x 1530 min/max height mm: 500 / 950 Plate size: 1750 x 1530 injection unit Screw diameter mm: 100 injection weight gr: 3574 Injection volume cm m³: 3927 spray pressure bar: 1960 Dimensions and weights Machine weight kg: 42,000/14,500 other Weight injection unit 14,500 kg dimensions (L x B x H) 6.00 x 1.72 x 2,20 m weight clamp unit 42,000 kg dimensions (L x B x H) 5.65 x 2, 80 x 3.36 m with Battenfeld robot

Battenfeld injection moulding machine Type: BA 8000 / 7700 HM, 12757 h Runhour! Control: Unilog 9000 C year of manufacture: 1996 Clamping unit Clamping force t 800 gap mm: 1250 Holm dimension mm: 1750 x 1530 min/max height mm: 500 / 950 Plate size: 1750 x 1530 injection unit Screw diameter mm: 100 injection weight gr: 3574 Injection volume cm m³: 3927 spray pressure bar: 1960 Dimensions and weights Machine weight kg: 42,000/14,500 other Weight injection unit 14,500 kg dimensions (L x B x H) 6.00 x 1.72 x 2,20 m weight clamp unit 42,000 kg dimensions (L x B x H) 5.65 x 2, 80 x 3.36 m with Battenfeld robot

Cat.-No. 14-0063 in a very good condition Total Height: 1720 mm Total Length: 3600 mm Diameter: 1600 mm Height Tank Body: 1620 mm Weight: 600 kg • Material: AISI 304, Front Side Marbled, Inside IIID • with Manhole on the front 420 x 320 mm • with Fermentation Lock • with Thread Connection ½ • with Clap NW 40 • with outlet discharge DN 40 with outlet WKG 40 • with Angle Seat Butterfly Valve All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Cat.-No. 14-00108 in very good condition Facilities: Outdoor: marbled inside: 2B with fermentation sheet pile connection with manhole front 430 x 330 mm with tasting cock with clear drain DN 65 Rest end with sealing flange DN 65 with level indicator bar with scale with head holder with flat ground with rest spout pulled forward Year of construction: 1983, manufacturer: Defrancheschi Dimensions: Width: 1780 mm Depth: 3700 mm Height: 4000 mm Weight: approx. 1.5 tonnes All prices are ex works plus legal VAT Freight costs: After delivery Delivery: from D-97753 Karlstadt Karlsburg Subject to prior sale

Reconditioned cylinder head not

Cat.-No. 14-00109 in a very good condition Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge year: 1983 manufacturer: Defrancheschi Measurements: Width: 1780 mm Depth: 3700 mm Height: 4000 mm weight: approx.. 1,5 tons All prices are valid ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Cat.-No. 14-00111 in a very good condition Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge year: 1983 manufacturer: Defrancheschi Measurements: Width: 1780 mm Depth: 6200 mm Height: 4000 mm weight: approx. 2 tons All prices are valid ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Cylinder head Exchange

Cat.-No. 14-00112 in a very good condition Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge year: 1983 manufacturer: Defrancheschi Measurements: Width: 1780 mm Depth: 6200 mm Height: 4000 mm weight: approx. 2 tons All prices are valid ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Injection pump complete - recon

Cat.-No. 14-00113 in a very good condition Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge year: 1983 manufacturer: Defrancheschi Measurements: Width: 1780 mm Depth: 6200 mm Height: 4000 mm weight: approx. 2 tons All prices are valid ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Cylinder head

Plate apparatus Sigma 37 Manufacturer: API Schmidt-Bretten GmbH & Co.KG Type: Sigma 37 Serial number: 61/28925/06 Output: 18,000 l / h Year of construction: 1978 Product: Solution 60% TS Temperature: 20 ° C - 95 ° C Max. Betreibsüberdruck: 10 bar Chamber: Serial number: 61/17825/04 Output: 18,000 l / h Holding time: 40 s Year of construction: 1978 Max. Operating pressure: 6 bar Tension: Initial size (new seals): 1.345 mm Biomass (seals consumed): 1,277 mm Movable lid.

Molding machine of Mag Type: Ergotech 420/800-3300 system control: NC 4 year: 2000 Clamping unit Clamping force t 420 gap mm: 710 Holm dimension mm: 810 x 710 min/max height mm: 820 / 940 Plate size: 1200 x 1100 injection unit Screw diameter mm: Gr 80 injection weight: 1600 Injection volume cm 3: 1779 spray pressure bar: 1855 Dimensions and weights Dimensions Lxwxh m: 7.8 x 2.2 x 2.4 machine weight kg: 21000 Miscellaneous 4 core EUROMAP 12

Injection pump complete, used

Raw water pump in Exchange

Turbocharger - recon

Colmec Italy 150mm dia coldfeed extruder, roller feed - 200mm wide, Screw length 2000mm, L/D ratio 13:1, with simple Spaghetti die/cutter assembly, jacketed barrel and cored screw for temperature regulation (no TCU's included). with 100HP, 1750rpm, 575V, 3ph, 60Hz AC motor (ex Canada) and controls. Fabricated bedplate. Screw height: 620mm. In very good condition.

1. STRIP WIDTH: 300-750 MM, THICKNESS: 0.2-1.5 MM, CAP.: 17500 T/A., MODERNISED: 1995 & 2005 2. LOOPING SLITTER, STRIP WIDTH: 200-356 MM; THICKNESS: 0.05-0.5 MM, CAP.: 5500 T/A., 3. STRIP WIDTH: 300-365 MM, THICKNESS: 0.5-2.0 MM, CAP.: 6500 T/A.

Brand: APV Gaulin Type: MC 120-3TPS capacity: 20.000 l/h pressure: 205 bar Stages: 2 Dimensions: 170cm x 130cm x 175cm (LxBxH) Country of Origin: Germany YOM: 1993

Formcook combi grill Belt width: 1100 mm Grill length: 11.000 mm Heating: thermic oil Cooking time: 3-50 min. Maximum temperature of 250 degrees Celsius Power: 25 kW Dimension: 12.825 x 1740 x 2323 mm Weight: 10.000 kg

Netstal injection moulding machine Type: HP 3000 / 1650 control:-year of production: 1995 Clamping unit Clamping force t 300 gap mm: 625 Holm dimension mm: 680 x 680 min/max height mm: 500-850 Plate size: 1040 x 1040 injection unit Screw diameter mm: Gr 70 injection weight: 868 Injection volume cm 3: 954 spray pressure bar: 1727 Dimensions and weights Dimensions Lxwxh m: 9 x 2.30 x 2.52 machine weight kg: 21.500 Miscellaneous EUROMAP 12

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...

Netstal injection moulding machine Type: HP 3000 / 1650 control:-year of production: 1995 Clamping unit Clamping force t 300 gap mm: 625 Holm dimension mm: 680 x 680 min/max height mm: 500-850 Plate size: 1040 x 1040 injection unit Screw diameter mm: Gr 70 injection weight: 868 Injection volume cm 3: 954 spray pressure bar: 1727 Dimensions and weights Dimensions Lxwxh m: 9 x 2.30 x 2.52 machine weight kg: 21.500 Miscellaneous EUROMAP 12

Ladies and gentlemen, below the offer for a used 200 beds hospital The entire technology can be checked before handover. Prices: on request We are also happy to offer you other new and used medical devices. We would be pleased to have your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buye ...

Technical data: Loads Load: 70 kg Additional load: 20 kg Workspace: Max range: 1720 mm More info and versions: Number of axes: 4 Repeat accuracy: +/-0.1 mm Weight: 1050 kg to 1200 kg

Used disc centrifuge production WSK Krakow, Model MB 1734 CE. New 1987. 6000-6300 rev/min. 6 pieces available. Centrifuges renovated. Capacity 5.000 l/h. Centrifuges for oil.

Ditron glass dimension dc10 60m/min reference point every 50 mm IP 55 TTL signal (EIA422 signal on request) Suitable for almost all China brands 24 months warranty! DITRON glass scale DC1 010/160 DC10/170 DC10/180 DC10/200 DC10/220 DC10/250 DC10/300 DC10/320 DC10/350 DC10/420 DC19/450 DC10/470 DC10/500 Please specify the length of the length when ordering! Please note: The measuring length of a 200 scale is 225 mm. The building length is 333 mm (200 + 133 mm). DIN ISO9001 resolution 5 x (0.005 mm) power supply +_5Volt DC output signal TTL connection cable 3 m read head 5times plug SUB-D9; New