15 mw used for sale

Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Control unit, control valve, hydraulic pressure regulator, pressure switch, PressureController -Manufacturer: Parker i, Hydraulic Pressure Controller Type SCPSD-250-14-152 -Pressure range: 250 bar -Accessories: including attachments, see photos -Total dimensions: 210/90/H50 mm -Weight: 0.7 kg

chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300

Depth gauge, dial gauge, depth gauge, depth caliper, caliper, caliper, depth micrometer, depth screw -Depth measuring screw: Depth micrometer measuring range: 0-150 mm -Reading accuracy: 0.01 mm -Fine-tuning -Box dimensions: 260/155/H35 mm -Weight: 0.8 kg

Boekels EWK 1500 PLUS WS1,25kSD inline checkweigher with reject device, weight range up to 1500 g (working weight up to 1250 g), calibration value e=0.2 g, accuracy +/- 0.2 g, belt width approx. 150 mm, length of infeed belt approx. 300 mm, length of outfeed belt approx. 300 mm, length of weigh cell approx. 300 mm, belt speed up to. 0.5m/s, capacity up to 100 weighings per minute, electrics 230V/50Hz, connected load 600 VA, machine floor space approx. 1050 x 1020 mm (WxD), machine height approx. 1700 mm, machine net weight approx. 245 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 41 mm -Groove width: 25/22 mm -Dimensions: 150/120/H218 mm -Weight: 9.7 kg

ABUS ELKE - ELV 5t / 15m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : DEMAG IR-H 10 radio control Wingspan : 15000 mm Chassis (sides): 3220 mm, are removed Load capacity : 5000 kg Tare weights : approx. 3950 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

Universal Rotor Shears UC 1500 Power 2x55 kW Cutting unit ejection opening: (width x length) 1124 mm x 1520 mm Rotor shaft speed 1: 16 rpm Rotor shaft speed 2: 16 rpm Knife width: 70 mm Number of Knives-4 EZN Infeed Lugs Incl. hopper, pusher without hydraulic unit

Workbench, work table, assembly bench -Workbench: with drawers, solid construction -Width: 1525mm -Depth: 750mm -Height: 850mm -Drawers/cabinet doors: each 2x, lockable/without lock -Number: 2x workbench available -Price per piece -Weight: 106 kg/pc.

Coupling module, industrial Ethernet switch, network switch, Lan switch, coupler, DP/DP coupler -Manufacturer: Siemens, Simatic S7 coupler DP/DP coupling orig -Type: 6ES7 158-0AD01-0XA0 -Number: 2x coupler available -Price per piece -Dimension: 115/40/H125 mm -Weight: 0.3 kg/pc.

sheet width: 1570 mm plate thickness: 10 mm pre-bending: 8 total power requirement: 7 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,5 x 1,5 x 1,55 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transversal Sheet metal Stiffening machine ALMORE type DS RT 1500 Year of construction:1988 Capacity: 1550 x 1,5 mm Thickness: from 0,4 to 1,5 mm Speed: from 7 to 15 m/min. Foot control Length: unlimited Useful machine for making ventilation ducts Voltage: 380 V Dimensions (L x W x H): 2000 x 800 x 1500 mm Weight: approx 1500 kg

Workbench, work table, assembly bench -Workbench: with drawers, solid construction -Width: 1500mm -Depth: 800mm -Height: 840mm -Drawers/cabinet doors: each 2x, lockable/without lock -Number: 1x workbench available -Price per piece -Weight: 106 kg/pc.

Workbench, work table, assembly bench -Workbench: with drawers, solid construction -Width: 1500mm -Depth: 700mm -Height: 880mm -Drawers/cabinet doors: each 2x, lockable/without lock -Number: 1x workbench available -Price per piece -Weight: 110 kg/pc.

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo, compact cylinder type ADVU-40-63-PA 156005 -Stroke: 60 mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 127/60/H83 mm -Weight 0.9 kg/pc.

Coated steel tank Dimensions : - Depth : 2500 mm - Width : 2300 mm - Total height: 3680 mm (incl. dome) - Ground clearance: 420 mm Equipment : - Partial discharge DN 40 - Residual discharge DN 40 - Rectangular manhole 320 x 420 mm - Level indicator - Dome DN 500 mm - In perfect condition

grinding wheel diameter: 150 mm no. of working stations: 2 Stück total power requirement: 0,25 kW motor speeds:: 2900 min 1 Workshop grinding machine 0.25 kW, 400/3 V, 50 Hz., 2900 rpm, Equipped with normal corundum grinding wheels 150x25x51 mm, grain 36 PQ and 60 M, with closed, adjustable steel protective hoods and workpiece supports Includes cable with CEE plug 2 pieces of eye protection shields, size 1 140 x 150 mm, complete with bracket, €60.00 Option: - In stand version Euro 1,192.00 net - With electronically controlled countercurrent brake which the grinding wheels after switching off brakes to a standstill within approx. 3 seconds, Emergency stop mushroom button, as a table machine Euro 1,665,-- net - In stand version with brakes Euro 2,042,-- net ? The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo, compact cylinder type ADVU-40-10-PA 156541 -Stroke: 10mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm -Number: 2x cylinder available -Price per piece -Dimension: 62/50/H93 mm -Weight 0.5 kg./pc.

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Pneumatic cylinder: double-acting, stroke 1570 mm -Piston: Ø mm -Piston rod: Ø 25 mm / M20 x 1.5 -Dimensions: 1860/100/H160 mm -Weight: 32 kg

Coupling module, Industrial Ethernet Switch, Network Switch, Lan Switch, Coupler, DP/DP Coupler -Manufacturer: Siemens, Simatic S7 Profibus DP/DP Coupler -Type: 6ES7 158-0AD00-0XA0 -Number: 2x couplers available -Price: per piece -Dimensions: 40/120/H80 mm -Weight: 0.5 kg/piece

Clamping plate, welding table, welding table, straightening plate -Clamping plate: solid design -Clamping area: 1550 x 1000 mm -Table height: 730 mm -Plate thickness: 130 mm -Transport dimensions.: 1550/1000/H730 mm -Weight: 1550kg

Workbench, work table, assembly bench -Workbench: with drawers, solid design -Width: 1595mm -Depth: 730mm -Height: 925mm -Drawers/cupboard doors: lockable / without lock/key, see photos -Weight: 132 kg

glue spreading machine -Diameter roll: 237 mm -working width: 1525 mm -Shaft: Recording: see photo techn. drawing -Total dimensions: Ø 237 x 2010 mm -Weight: 127 kg

Workbench, work table, assembly bench, assembly table, work table -Workbench: solid construction -Width: 1500mm -Depth: 700mm -Height: 840mm -Weight: 48 kg

Workbench, work table, assembly bench, assembly table, work table -Workbench: solid construction -Width: 1500mm -Depth: 700mm -Height: 855mm -Weight: 75 kg

RUHLE / RÜHLE MPR 150 Vacuum Cooling Tumbler / Mixer Tablet control (height adjustable) Automated lid opening and closing tiltable hopper Direct cooling system Stainless steel vacuum canal, cooled Quick arm fastening Scraper, pressure assembling variable speed from 0-50 RPM vacuum system from 0-90% 150 liters tumbler capacity

Workbench, work table, assembly bench -Workbench: with drawer, solid design -Width: 1500mm -Depth: 700mm -Height: 950 mm with border -Drawer: lockable / without key, -Weight: 62 kg

CNC control, card slot, control cards, MC3 control, plug-in cards, circuit boards, circuit board, analog distribution card, power supply, electronic module -Electronic Modul: Tool Master K -Type: 5V - 1515 -Dimensions: 130/80/H30 mm -Weight: 0.2 kg

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WD5-008.151-00 -Quantity: 2x controllers available -Price per piece -Dimensions: 310/60/H180 mm -Weight: 2.5 kg/pc.

Compressed air filters, fine filters, filters, flange filters, compressed air microfilters -Manufacturer: Domnick Hunter, compressed air filter -Type: unfortunately no exact type designation -Dimensions: see photos -Dimensions: 270/150/H495 mm -Weight: 7 kg

The blower stage is completely overhauled and can also be offered as a complete unit.

Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool scraper -Holes: Ø 13 mm -Threaded hole: M15 -Dimensions: 150/100/55 mm -Weight: 1.8 kg

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelves, tray trolleys, embroidery trolleys -Transport trolley: commission trolley -Chassis: 4 swivel castors -Dimension: 1515/900/H1640 mm -Weight: 83 kg

Key data: 150 t, 2550 mm

Stock number: 3866 CNC PRESS BRAKE Manufacturer: BEYELER, Type: PR 8 150D x 3100 mm Machine NO.: 96/445/002, Year of manufacture: 1996 Specifications: Gr. bending length 3100 mm Gr. pressure capacity 150 tons Stroke length 215 mm Column passage 2550 mm Projection 305 mm Total power 7.5 kW CNC control Cybelec DNC 908 PS Presscad Fabr. Controlled in 4 axis Y1-Y2-x1-x2 axes Length: 1900 mm, Height: 2600 mm, Width: 3500 mm, Weight: 9500 kg

Globoid gear, indexing, oscillator indexer, index gear -Manufacturer: Manifold, gearbox from rotary indexing table type RTU 800 8-150 -Translation: i = 1:8 45° -Dimensions: see photos -Quantity: 2x gears available -Price per piece -Dimensions: 470/375/H500 mm -Weight: 172 kg/pc.

conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type ZFTSP -Speed: m/min -Conveyor belt length: 830 mm -Belt spacing: 3x 500 mm -Conveyor width: 1500 mm -Drive: SEW-Eurodrive 0.18 kW 1380/71 rpm -Dimensions: 1900/900/H2150 mm -Weight: 219 kg

Refrigeration unit Bitzer 4JE-15Y-40P for TK or Plus cooling Year of manufacture 2022, like new Displacement: 63.5m3/h 33 Kw cooling capacity at minus 10°C 13 KW at minus 30°C 11 kw./15 hp. Electrical power, Amp.30.8 Refrigerants 404a, 449a, 448a, 452a,134a etc.

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holder: SK40 holder -Inner diameter 57.5 mm -Dimensions: Ø 76 x 157 mm -Weight: 1.8 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Cebeha, gear motor type CB SF 150-63 N/40 -Speed: 23 rpm -Engine: 0.18 kW / 1360 rpm -Hollow shaft: Ø 20 x 85 mm -Protection class: IP54 -Total dimensions: 260/250/170 mm -Weight: 12.5 kg

Gearbox, spur gear, angle gear, worm gear -Gearbox: unfortunately without type designation -Translation: i= 131:1 -Shafts: Ø 28 x 35 mm / Ø 14 x 15 mm -Dimensions: 158/210/H158mm -Weight: 10.3 kg

Sealing insert, Seal -Manufacturer: DOYMA, Curaflex sealing insert A unused Ovp -Type: A DPS DN 150, for 86.0 - 94.0 GGV / EPDM -Article No.: 101009015000 -Nominal diameter: DN 150 for 86 - 94 mm -Quantity: 1x insert available -Dimensions: Ø 150 x 44 mm -Weight: 1.3 kg

Hydraulic press 1500 tons. Clearance between the two side pistons = 1400 mm. Clearance between uprights = 400 mm. Vertical clearance between open boards 3200 mm. Moving table dimensions = 1700 x 1800 mm. Fixed table size = 1500 x 2000 mm. This press has been used to produce forks for forklift.

Gearbox, spur gear, angle gear, worm gear -Manufacturer:Varvel, worm gear -Translation: i= 28 -Hollow shafts: Ø 24 x 100 mm / Ø 34 x 100 mm -Dimensions: 150/140/H170mm -Weight: 4 kg

Gearbox, bevel gear, worm gear -Gearbox: Ratio: i = 1:30 -Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm -Dimensions: 150/145/H175 mm -Weight: 5.1 kg

Enclosure, universal enclosure, aluminum enclosure -Manufacturer: Hammond, Aluminum Housing Junction and Pull Box -Type: 1550Z102 -External dimensions: Housing 90/36/H30 mm -Quantity: 9 pieces available -Price: per piece / Minimum order 3 pieces -Weight: 0.1 kg/pc.

-Planetary Mixer Manufacturer: Wodschow & Co Denmark -Type: R 150 -without boiler and without tools

EAGLE eVision 1530 F4.0 4kW fiber laser was built in 2016 in Poland. The machine has been maintained and upgraded on an ongoing basis throughout its service life. In 2021, the cutting head and modules in the laser source were replaced. The laser cutting machine is designed for machining sheet metal made of, among others, stainless steel and aluminium. The state-of-the-art 4kW fibre beam cutting technology, combined with a stable work table and a specially designed cutting head, achieves excellent dimensional and shape precision over the entire workpiece area, regardless of the cut material. The low cutting edge and small heat-affected zone additionally ensure that the workpiece geometry is not altered during machining at the edges of the material. The eVision 1530 F4.0 fiber laser is offered with equipment consisting of, among others, an intuitive BECKHOFF CNC controller and a DONALDS ...

fan, blower, fan wheel, cross-flow fan, cross-flow blower, cross-flow ventilator, roller fan -Fan blower cross-flow fan -Engine: EMI 105B-50110/3 -Voltage: 230V / 110/300 W / 1100 rpm -Fan wheel: both sides Ø 150 x 240 mm -Dimensions: 1040/220/H200 mm -Weight: 10 kg

FKS 315-1500E Sliding table saw Trimming length 1220mm Saw Blade Diameter 315mm Cutting height 100/75mm Cutting width with stop 940mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 2,4kW 400V Weight approx. 210kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900315

machine spirit level, block spirit level, frame spirit level, spirit level, precision spirit level, frame spirit level -Machine spirit level: frame spirit level -Frame size: 150 x 30 mm -Reading: 0.3 mm/m -Dimensions box: 195/195/H55 mm -Weight: 1.7 kg