1 mw gas used for sale

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CV-185 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Rotary vacuum pumps sliding & lubricated Number: 5 PCs Status: Rebuilt Warranty: 12 months Manufacturer: Busch Type: RA160D Voltage: 50/60 Hz 400V Motor power: 4KW Nominal: 160m ³/h Discharge pressure: 0,5hpa(mbar) Includes: user manual, parts list Delivery time: In stock; ready for operation

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...

Lawn Sweeper for PTO 540 rpm, working width 180 cm, double Sweeper roller system, hydraulic high dump, electrical. Remote control acting on solenoid valves, ew 1 hydraulic connection required. Tank contents approx. 3 m ³, rear axle 6 x frosted. Drawbar adjustable in height, illumination device com. StVZO. Machine is relatively little used, brushes and Tin in good condition with paint defects inside the tank and signs of use. Incl. operating instructions, parts list, and ABE. Type same Kugelmann KDH 150 (150 cm working width) also available and more with working widths from 90 to 170 cm. -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Bush two stage pumps stand: data pump status: type: BNV 1000 A Vacuum: mbar (abs.) 0.005 Data backing pump: Type: NC0400B suction volume: 400 m³/h Discharge pressure: 0, 05mbar (ABS) Data booster: Type: WV1000B Suction power: 1000 m ³/h Discharge pressure: 0, 005mbar (ABS) Condition: tested, serviced (good condition) Includes: vacuum pre-filter, oil filling Warranty: 3 months; ready for operation

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CVE-110 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CVE-185 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CVE-110 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CV-110 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CV-150 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

MAZAK INTEGREX 200 SY + FLEX GL-100C. 2001. MAZATROL 640 MT control maximum turning diameter 540 mm Z-axis travel 1,065 mm Main spindle maximum RPM 5,000 rpm Main spindle full C-axis Counter-spindle maximum speed 6,000 rpm Y-axis +/-80 mm Milling spindle for turning and milling Spindle maximum speed 6,000 rpm Full B-axis, 225° Tool changer with 40 tool positions KM-63 tool mount Tooleye 1 x 3 - jaw Chuck, diameter 210 mm 1 x 3 - jaw Chuck, diameter 170 mm Gantry loader Flex GL-100 C. High pressure cooling through spindle, 20 bar Chip conveyor CE mark

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CV-185 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Dear's Sale, Complete engines MTU 16V4000M33F working condition Brgds info@kscege

Type DTW-120A Horizontal three axis Brush roll height 300/600/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1780x760x880 mm Weight 165 kg

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CVE-110 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

With CNC control, HEIDENHAIN, Type: TNC 155, measuring taster Separate control cabinet: 1260 x 500 x 1700 mm Travel distances 700 x 550 x 550mm Table area 1000 x 490 mm Accessories: Treatment / Cooling system / tool shots The machine stored since 2013. At the time of storage, the machine was fully functional.; ready for use

Technical data: -Compressive force 100 t -Throat 320 mm -Wide stand below the Guide 400 mm -Table size approx. 850 x 610 mm -Discontinued diarrhea hole in the table 335 / 300 mm -thickness of the table clamping plate 90 mm -gr. Height approx. 300 mm -Plunger area 600 x 335 mm -Adjustable height of the RAM 80 mm -Stroke adjustment 10-130 mm -Emissions er hub in the RAM 32 mm -Speed continuous operation approx. 56 / min -Drive 400 V / 11 kW -Space requirement approx. B H 1900 x 2800 X 2200 mm -Weight approx. 9000 kg Starring:-UVV press backup controller PREVENTA -Hydr. + pneumatically actuated clutch -LUTEX auxiliary braking system -Central lubrication

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CVE-185 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

FKS 250-1300 Circular sawing machines Max blade D.: 254 mm Be hem length 1250 mm RIP fence cutting width 610 mm The length width 845 mm Blade tilt 90 ° /-45 ° Table dimensions (L x W) 650 x 350 mm Table height 835 mm Blade rotation speed 4000 1/min Engine: 1, 5kW 230V Dust nozzle D.: 100 mm / 30 mm Weight: 142kg G & PIECES 5902030

Hint: No screw material included. Technical data on the restock straps: Manufacturer: Jung Heinrich Type: MPB The scope of delivery includes: 02x Top-up tabs, used total height: approx. 320 mm overall width: approx. 110 mm Inner width: approx. 102 mm f. Frame profile width: approx. 100 mm Depth: approx. 50 mm Material thickness: approx. 4.00 mm Hole spacing i. d. depth: approx. 50 mm Perforated grid i. d. width x height: approx. 60 x 50 mm Drill holeØ: approx. 10 mm Material color: blue Weight | pcs.: approx. 1,860 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Spare welding controllers for resistance welding machines also available: MPS 1033 MPS 1036 MPS 15033 MPS 15036 MPS 15043

Rollers loyal for three-point hitch. Splitt-, salt and sand spreaders, content 200 ltr. (with optional essay 280 ltr. possible), spread width 100 cm. Foldable litter floors and shutters made of V2A stainless steel, scattered wave with wear-resistant plastic elements, container cover with hinged bar. Min. for hydraulic drive with flow 12 / MAX 25 ltr. / min. Almost like new condition.

GS10 - used approx. 100 m³ / 100,000 litres double-walled steel tank, water tank, firefighting water tank, fuel oil tank. In good condition, horizontally lying storage tank, steel tank, former heating oil tank. capacity: 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616D dimensions: Ø approx. 2.90 m x length 15.8 m weight: approx. 17.0 t manufacturer: Thyssen safety tank bitumen coating outside The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. Minor insulation damage caused by transport may be present. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily.  ...

MITRE Assembly typesetting machine with high frequency Miter cut length 100 mm for the gluing of frame parts with white glue Various machines in stock

Bandwidth of 50-500 mm Band thickness 0.8 3.6 mm Belt speed 5-40 m / min Feed rollers 2 PCs Richwalzen (80 mm) - 11 PCs Working direction optional

This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request

Technical data: -Working width 1030 mm -Material thickness 1.25 mm -Roll diameter 55 mm -Upper roller swing -Rear and front wave about eccentric adjustable -Rear and front wave each with a Groove to round -for sheet metal with wire inlay -Space requirement approx. B H 1350 x 1050 x D 750 mm -Weight approx. 150 kg

TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...

Technical data: -Bending mot. Automatic or manual mode -Bending performance square steel ST 37 up to approx. 25 mm -Bending performance ST 37 steel up to approx. 30 x 8 mm -Bending length betw. the adjustable 1000 mm turning units -Faceplate with various recording profile perforations -Tailstock / recovery storage -Delay start bending / bending length twisting preselection - right - left rotation -Space requirement approx. B 1750 x H 1100 X 500 mm -Drive 400 V / 0,75 kW -Weight approx. 150 kg

Federal load - 1500 kg Federal width - 500 mm Outer diameter - Max 1250 mm Spreader range without attachment segments 310-460 mm, 410-560 mm High of lateral ditches. Strip lines approx. 470 mm Bc9eg37hb2 Speed of the reel shaft - 16 U / min, power 0,55 kW Manual spreading, adjustable -Torque limiter, soft start, - band drain brake -with push segments -hydraulically actuated process equipment â completely. Hydraulic unit mass - L 3300 B 1500 H 1500 mm

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Used Zanelli paddle mixer total volume 1700 liters. YOM 1993. Engine speed regulated by 6-11 kW inverter. Internal dimensions: diameter 1.2 m, length 1.5 m. Weight about 3000 kg. Made in stainless steel. No technical documentation

LAD fresh meat mincer type WW 130 complete stainless steel on request with loading for 200 liter standard trolleys

POWER ELECTRONICS ASSY - CONTROL BOARD FOR FILLING MACHINE VEMAG TYPE 134 ROBBY II - / PC 880 / ARTICLE NUMBER VEMAG: 871.371-004 871.380-002-574733-5LP210695 871.360-102 - 871.360-002 072.999-005 875.821-005 - 871.821-105 871.370-004 - 871.370-701 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Complete gear, from scrapped vessel. 2 pc on stock. All parts on stock for overhaul of this gear type.

SIMOTICS S Synchronmotor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, new -40% Special price The current new price of a similar product is € 1.761 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - SIMOTICS S synchronous motor, 0.82KW, 1FK7042-2AF71-1CH1, Siemens - rpm 3000 - n max. 9000, - With encoder AM24DQI and brake 24VDC - Smooth shaft D19mm - Incl. connection cable and patch cable 16 or 12m - Connection dimensions: Centring D81mm, pitch circle D100mm x z4, Attention: We have the complete winding drive, rewind drive D75mm and D150mm ...

Hypoid gearbox, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 3,430 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: SPK+100S-MF3-500-0E1-1S11, I=500, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Motor side: centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: centring D90mm, shaft D32mm, Attention: We have the complete winding drive, rewind drive D75mm an ...

used, good condition radial drilling machine / Kesselradiale of Collet and Engelhardt, type BUV 1000 Head is rotating and swiveling. The machine is fully moveable. Technical data Spindle retainer 4 MK Drilling capacity approx. 40 mm RADIUS approx. 900 mm Dimensions L x W H approx. 2100 x 1000 x 2500 mm Weight approx. 2500 kg

GS14 - used approx. 100 m³ / 100,000 litres double-walled steel tank, heating oil tank, firefighting water tank, water cistern. In good condition, aboveground tank on two mounted steel consoles, storage tank, water tank, former oil tank, steel tank painted in green. capacity: approx. 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616/2 dimensions: Ø 2.9 m x approx. 15.8 m long weight: approx. 17.0 t manufacturer: Kraemer Apparatebau other: 2 entry shafts Upon request the tank can be repainted for additional charge. The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask u ...

Diosna spiral mixer SPV 160 AD with 2 telescopic boiler For up to 160kg dough per Pan Kneading tool made of stainless steel Includes two stainless steel bowls Timer with two watches Two speeds Friction wheel drive Condition: reconditioned; checked and cleaned

Two CHRONOS G 100 grain scales on extra sale! With jacket, outlet funnel, performance boost Approx. 30 t / h performance with heavy grain Refurbished, in good condition, see pictures!

Qty. 1 Second-hand extrusion press with piercer Mfc.: UBE Force: 800 MT Built: 1979 Revamped: new hydraulic in 2010 Container dimensions: Dia. 90 x 555 mm Dia. 127 x 560 mm Dia. 132 x560 mm Material: Copper, Brass, Aluminium, Silver etc. Press is in good condition & on foundation

COMPLETELY WORSHOP REFURBISHED ! Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping

Control unit CU320-2 PN. SINAMICS, 6SL3040-1MA01-0AA0, Siemens, mint condition Special price Attention: Original Siemens product, no replica from.. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Control Unit CU320-2 PN, SINAMICS, 6SL3040-1MA01-0AA0, Siemens, - Digital Outputs 24VDC 0,5A - incl. SINAMICS Control Panel 6SL3055-0AA00-4BA0, Siemens, - incl. SINAMICS S120 Compact flash card, Performance 1, 6SL3054-0FC01-1BA0-Z, Siemens, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in  ...

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Qty. 1 Second-hand strip rolling mill plant Mfc.: Gautchi, Pechiney, Spidem, Stein Heurty SA, TECMO-HUNTER, ACHARD, WALDRICH Built: 1971, 1973, 1975 Modernisation in 1991 Strip width: 850 – 1600 mm Thickness Entry: 12 mm Exit: 0.3 mm Consist of: Qty. 2 Strip casting line 4-Hi rolling mill Qty. 2 Homogenisation furnaces Slitter Grinder Qty. 2 Coil cars

Key data: 150 , 394 , 50

Manufacturer/manufacturer: Krauss Maffei Typ/type: KM 110-390 C1 Year/year: 1993 Control/controller: MC 4 Clamping force/clamping force: 1500 kN Holmabstand/Dist.Betw.Tiebars: 500 mm x 500 mm Disk size/platen size: 750 x 750 mm WZ height/mould hight: min 250 max 500 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 1060 mm Auger/screw size: 50 mm Stroke volume/shot volume: 442 CC / 394 gram PS Spritzdr / injection pressure: 1946 bar General / General engine power: 30 kW Heating/heating power: 14,8 kW Dimensions/dimensions: 5.5 m x 1.6 m x 2.10 m Weight/weight: 5600 kg Screen text: German Options/optional extras Core puller / core pulling: x 1 Air valve / air valve: x 1